聚L-乳酸/4,4'-二羟基二苯硫醚共混物的分子间相互作用及结晶和熔融行为

利用红外吸收光谱(FTIR)研究了聚乳酸(PLLA)/4,4'-二羟基二苯硫醚(TDP)熔融共混物的分子间相互作用,结果表明,PLLA的羰基与TDP的羟基之间形成了分子间氢键.通过差示扫描量热(DSC)研究了共混物的玻璃化转变行为及非等温结晶和熔融行为.结果表明,样品的玻璃化转变温度(Tg)随TDP含量的增加呈线性下降.共混物的熔融结晶温度(Tc)、结晶焓(ΔHc)、熔融温度(Tm)及熔融焓(ΔHm)均随TDP含量的增加呈下降趋势,而冷结晶温度的变化趋势则相反.当TDP达到40%(质量分数)时,共混物的DSC曲线既未出现结晶峰,也未出现熔融峰,表明该样品已完全成为非晶态物质.广角X射线衍射(WAXD)分析结果表明,TDP的加入未改变PLLA的晶型,但导致其晶面间距变大,晶体结构变得松散.因此共混物熔点的下降归因于分子间氢键的形成降低了PLLA分子链的运动能力及晶体的紧密程度而非晶型的改变.     

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响麦堪成，许家瑞，梅震，曾汉民（中山大学材料科学研究所，广州，５１０２７５）关键词聚醚醚酮，聚苯硫醚，结晶／结晶共混物，结晶熔融行为近年来，高性能聚合物共混物如聚砜（ＰＳ...     

聚间苯硫醚和聚对苯硫醚的对比表征

聚对苯硫醚[poly(pphenylenesulfide),简称pPPS]的分子链是由对苯撑基和硫原子交替连接构成而使制品抗冲击能力差[1](有些研究者用共聚或共混的方法在pPPS中引入间位结构来达到减少其结晶度,增强韧性的目的)。余自力等[2]用硫磺溶液法合成了mPPS、pPPS及其共聚物,认为在pP...     

N-羟基邻苯二甲酰亚胺引发的聚乙烯熔融接枝反应

研究了N-羟基邻苯二甲酰亚胺(NOP)用于引发4种卤胺类前驱单体包括甲基丙烯酰胺(MA)、N-叔丁基丙烯酰胺(N-t-BuA)、马来酰亚胺(MI)和N,N-二烯丙基三聚氰胺(NDAM)与线性低密度聚乙烯(LLDPE)的熔融接枝聚合反应,并将其与工业上普遍应用的有机过氧化物(过氧化二异丙苯,DCP)引发法作对比。在接枝效率方面,NOP的引发效率与单体的分子结构和投料量密切相关。这4种单体中,N-t-BuA的接枝效率最高,与DCP法的差异在2.5%~16.0%之间;MI的接枝效率最低,比DCP法低55%。在副反应控制方面,实时扭矩、凝胶含量和熔融指数测试证实NOP引发体系中聚乙烯交联副反应程度明显低于DCP,接枝反应更加可控。     

3,3'-二磺酸钠4,4'-二氟苯砜的合成

在高氯酸钠催化下,氟苯与氯化亚砜反应制得4,4'-二氟二苯亚砜(2);2经H2O2氧化制得4,4'-二氟二苯砜(3);3用发烟硫酸磺化合成了3,3'-二磺酸钠4,4'-二氟苯砜,总收率57%.其结构经1H NMR确证.     

结晶／结晶共混体系聚苯硫酸／聚醚醚酮中聚醚醚酮组分的结晶熔融行为──熔融温度的影响

igh performance crystal/crystal blends of poly (phenylene sulfide) and poly (ether ether ketone) (PPS/PEEK) have ho prepared by dry mixing and melhng at different temperatures. The crystallization and melting behavior of PEEK component in quenched blends have ho investigated by differential scanningcalorimetry (DSC). As melt temperature (T_melt) increases, the crystalline andmelting behavior of PPS and PEEK is different due to the difference of thermalproperty of PPS and PEEK. The temperature of melhng (T_m) and crystallization (T_c) and crystallinity (X_c) of PEEK component in blends increase as the content of PPS increases up to 50%. However. this action of PPS is suppresed with increasing of T_melt.     

4,4'-二苯甲烷二异氰酸酯的高效液相色谱分析

用甲醇做衍牛试剂,把4,4'-二苯甲烷二异氰酸酯(MDI)衍生成4,4'-二苯甲烷二氨基甲酸甲酯(MDC),通过高效液相色谱分析MDC的含量来计算MDI的含量.该方法可以将MDI与合成反应中其他化合物完全分离.在测定浓度范围内线性关系良好,方法简单快速,精密度与准确度高.方法既保护了MDI中活泼的异氰酸根,也不需使用运输和储存困难的MDI标准品,能很好地用于化学合成中该产物的分析.     

聚乳酸可降解材料结晶和熔融行为的研究

用DSC和XRD研究了聚乙二醇（PEG）用量、分子量和退火温度对PLA结晶和熔融行为的影响。结果表明PEG的加入有利提高PLA的结晶度和结晶温度;PLA／PEG样品在低于10022退火后均表现出双熔融峰特征,退火温度越高,样品的低熔融峰（Tm1）越高且熔融热焓也越高;PEG分子量越大,其低熔融峰的熔融热焓（△H1）越大...     

聚醚醚酮/聚醚醚酮酮共混体系的熔融和等温结晶行为

采用熔融共混方法制备了聚醚醚酮和聚醚醚酮酮的共混物,用DSC对共混物的熔融行为和等温结晶行为进行了研究.结果表明,共混物熔点随聚醚醚酮含量增加而降低,但与聚醚醚酮酮有相同的平衡熔点,二者共混没有改变其结晶的成核与生长机制.     

聚甲醛结晶过程的流变学方法探索

使用流变学方法小振幅振荡剪切跟踪了聚甲醛降温结晶和升温熔融的动力学过程,结果表明流变学方法也是测定结晶、熔融温度的有效手段.转变温度可由动态储能模量的起始偏折点进行标识;而对于恒温结晶过程,流变学方法可由动态储能模量对时间的演进得到结晶过程中的相对结晶度,进而使用Avrami方程拟合获取结晶动力学参数,还可将结晶过程视为物理凝胶化过程而使用凝胶化时间标示结晶过程的快慢.     

蒙脱土对尼龙66熔融与结晶行为的影响

通过DSC方法研究了蒙脱土对尼龙66熔融与结晶行为的影响,探讨了蒙脱土对尼龙66结晶的成核作用。发现有机蒙脱土使尼龙66的熔融峰温度Tm提高5.3℃,使结晶峰温度提高13－24℃,二次熔融多产生双重熔融峰,蒙脱土的加入有利于生成低温峰。     

聚甲醛/蒙脱土纳米复合材料非等温结晶动力学研究

聚甲醛/蒙脱土纳米复合材料非等温结晶动力学研究     

Melting and crystallization of tetrafluoroethylene-ethylene copolymers

The melting and crystallization of copolymers of tetrafluoroethylene with ethylene, synthesized in bulk and in suspension by semi-flow method, were studied by DSC. X-ray diffractions and infrared spectra of the copolymers were measured and new crystalline reflections different from those of the homopolymers were observed. The melting temperature of the copolymers synthesized in bulk depends strongly on the composition and exhibits several maxima. A certain small decrease in the melting temperature within the range of the alternating composition is observed. For alternating copolymers synthesized in suspension, the peaks are monomodal indicating a higher structural and chemical homogeneity of the copolymer. The nonisothermal crystallization kinetics in the temperature interval from 260 to 255°C of the alternating copolymer prepared in suspension can be described by a modified Avrami equation. The mechanism of nucleation and nuclei growth during the nonisothermal crystallization of the tetrafluoroethylene-ethylene copolymer is close to that of polyethylene.     

聚酰胺6／聚醚砜共混体系的结晶与熔融行为

聚醚砜（ＰＥＳ）是一种非晶特种工程塑料，具有强度好，使用温度高等特点，但熔体粘度高，加工上有一定困难．聚酰胺６（ＰＡ６）是部分结晶的工程塑料，有很好的强度和耐磨性能．加入适量的ＰＡ６，可显著地降低ＰＥＳ的熔体粘度，且可基本保持ＰＥＳ的原有性能［１］．...     

官能团化聚丙烯对Mg(OH)2/PP结晶与熔融行为的影响

制备了官能团化聚丙烯改性Mg(OH)2/PP复合材料，并用DSC研究了改性PP，Mg(OH)2/PP和改性Mg/(OH)2/PP中PP的结晶与熔融行为，官能团化PP（FPP），丙烯酸（AA）和Mg(OH)2都能提高PP的结晶温度，归结于异相成核作用，AA和FPP加入进一步使Mg(OH)/PP中PP结晶温度提高，但AA用量增加对PP结晶温度无影响。     

丙烯酸及其接枝物对纳米CaCO3/PP结晶与熔融行为的影响

制备了丙烯酸(AA)及其接枝聚丙烯(PP—g-AA)改性的纳米CaC03／PP复合材料。用DSC研究了纳米CaCO3对PP、PP-g-A和AA对纳米CaCO3／PP中PP结晶与熔融行为的影响。结果表明：随纳米CaCO3用量增加，PP结晶与熔融温度提高，PP—g—AA加入使PP结晶温度进一步提高，PP的结晶温度也随从用量增加而提高；在过氧化二异丙苯(DCP)存在下，少量AA能明显提高PP的结晶温度，但增加从用量对结晶温度的影响较小；WAXD证实纳米CaCO3／PP复合材料中存在β晶。     

Factors Inhibiting the Alkyl-Branch Plasticization of Polyoxymethylene

The ability of an alkyl branch to depress the melting temperature in a polyoxymethylene chain is measurably less than that in a polyethylene chain. The factors that inhibit the alkyl-branch plasticization of polyoxymethylene are considered by computational assessment of a series of model compounds at various levels of theory: DFT B3LYP 6-31+G*, DFT B3LYP 6-311++G**, MP2 cc-pVTZ, T1, and G3(MP2). Intramolecular interactions—characterized as acetal CH···O hydrogen bonds—are surprisingly strong and likely encourage conformational regularity in the vicinity of the alkyl branches, allowing maintenance of the intermolecular chain-chain interactions. The acetal CH···O hydrogen bonds in dimethylene glycol average to 2.65 kcal/mol while the non-acetal CH···O interactions in 1,3-propanediol are much weaker with an average of 0.34 kcal/mol (G3(MP2)). The related, classical OH···O hydrogen bond in ethylene glycol is found to be worth 2.12 kcal/mol. To describe this energetic ordering, an additional stabilizing anomeric effect is invoked for dimethylene glycol, a model for polyoxymethylene.     

聚甲醛和聚氨酯共混物的微观结构与力学性能

聚甲醛和聚氨酯共混物的微观结构与力学性能徐卫兵，朱士旺，蔡琼英（合肥工业大学化工学院合肥２３０００９）关键词聚甲醛，聚氨酯，共混物，微观结构，力学性能聚甲醛（ＰＯＭ）是６０年代发展起来的新型工程塑料，具有高密度、高结晶性，且坚硬、耐磨、自润滑、耐疲劳...     

Crystallization and Melting of β-Nucleated Isotactic Polypropylene

Ca salts of suberic (Ca-Sub) and pimelic acid (Ca-Pim) were synthesized and used as β-nucleating agents in different grades of isotactic polypropylene (IPP). Propylene homo-, random- and block-copolymers containing these additives crystallize principally in pure β-modification as demonstrated in isothermal and non-isothermal crystallization experiments. Ca-Sub proved the most effective β-nucleating agent known, so far. It broadens the upper crystallization temperature range of pure β-IPP formation up to 140°C. The effect of the additives on the crystallization and melting characteristics of the polymers was studied. The degree of crystallinity of the β-modification was found to be markedly higher than that of α-IPP. High temperature melting peak broadening was first observed and discussed in literary results regarding the same phenomenon for α-IPP. This revised version was published online in August 2006 with corrections to the Cover Date.