苯乙烯—环氧乙烷嵌段共聚物的阴离子聚合与表征

用二苯甲烷钾为引发剂,阴离子聚合法合成了苯乙烯（Ｓｔ）－环氧乙烷（ＥＯ）嵌段共聚物,并用ＦＴＩＲ,＾１Ｈ－ＮＭＲ,ＳＥＣ,ＷＡＸＤ和动态粘弹谱对共聚物进行了表征。结果表明所得聚合物为分子量可控,窄分布的两嵌段共聚物。     

反气相色谱法测定苯乙烯-氧乙烯-苯乙烯三嵌段聚合物的表面能

 采用反气相色谱法测定了苯乙烯 氧乙烯 苯乙烯三嵌段聚合物 (PS PEO PS)的色散成分的表面能 (γsd) ,研究探讨了温度及嵌段聚合物链段结构组成对γsd 的影响 ,并确定了γsd 与温度的数学关系式。研究结果表明 :在 70℃～ 12 0℃范围内 ,PS PEO PS的表面能较低 ;随着PS PEO PS表面组成中氧乙烯 (EO)成分的增加 ,色散成分的γsd 增大 ,且对温度的变化极其敏感 :随温度的升高 ,γsd 急剧地呈线性下降。     

阴离子磺酸盐型Gemini表面活性剂与PEO-PPO-PEO嵌段共聚物相互作用的研究

用差示扫描微量热、等温滴定微量量热、动态光散射和核磁共振(NOESY,弛豫时间)技术,研究了在pH＝9时阴离子磺酸盐型Gemini表面活性剂12-3-12(SO₃)₂与PEO-PPO-PEO嵌段共聚物F127 (EO₉₇PO₆₉EO₉₇)和P123 (EO₂₀PO₇₀EO₂₀)之间的相互作用. 研究发现,随着12-3-12(SO₃)₂浓度的增大,聚合物的临界胶束温度(CMT)降低. 与传统的单链离子表面活性剂相比,12-3-12(SO₃)₂具有更强的降低共聚物CMT的能力. 此外,在低于聚合物的CMT时,12-3-12(SO₃)₂与聚合物单体可以形成聚合物/表面活性剂胶束聚集体;在高于聚合物的CMT时,12-3-12(SO₃)₂的加入首先与聚合物单体和胶束的混合物或聚合物胶束形成聚合物/12-3-12(SO₃)₂混合胶束,然后随着12-3-12(SO₃)₂浓度的增大,混合胶束逐步解离为小的聚集体,但是,即使在很高的12-3-12(SO₃)₂浓度时,混合胶束也未完全解离.     

苯乙烯-氧乙烯-苯乙烯三嵌段聚合物的受限结晶行为的反气相分析

 采用反气相法研究了苯乙烯 氧乙烯 苯乙烯三嵌段结晶聚合物 (PS PEO PS)的结晶熔融相变 ,测定了PS PEO PS的结晶度、熔点以及熔程 ,探讨了正构烷烃探针分子的碳链长度对测定结果的影响。研究结果表明 :PS PEO PS的微相分离对PEO链段的结晶行为有较大的影响 ,其晶体结构中存在由多种不完善PEO结晶和PS非结晶构成的中间层 ;正构烷烃探针分子的碳链长度对测定PS PEO PS的熔点和熔程无影响 ,但对结晶度测定和PEO结晶熔融相变的检测影响较大 ,所测得PS PEO PS的结晶度随正构烷烃探针分子碳链的增长而降低。     

苯乙烯-甲基丙烯酸甲酯嵌段共聚物的合成与表征

采用阴离子聚合技术合成了一系列苯乙烯-甲基丙烯酸甲酯的两嵌段共聚物(PS－b－PMMA)．采用GPC、FTIR、NMR(¹HNMR、¹³CNMR和固体NMR)和DMA等手段进行了表征．结果表明,所得产物为高分子量、窄分布、具有微相分离结构的两嵌段共聚物．     

新型不对称季铵盐Gemini表面活性剂的合成及其表面活性

以溴代烷和N,N,N′,N′-四甲基乙二胺为原料,经过两步季铵化反应合成了一种新型的不对称型阳离子Gemini表面活性剂——二亚甲基-1-正己基二甲基溴化铵-2-十八烷基二甲基溴化铵(3),其结构经1H NMR和元素分析表征.研究结果表明,3的Krafft点为21.9℃,且聚集能力强.     

异戊二烯-甲基丙烯酸甲酯的阴离子嵌段共聚合

在四氢呋喃（THF）与环己烷的混合溶剂中,以正丁基锂（n-BuLi）为引发剂,采用具有较大空间位阻和特定电荷环境的P配合物为添加剂,实现了异戊二烯（Ip）和甲基丙烯酸甲酯（MMA）的阴离子嵌段共聚。分别采用GPC、^1H—NMR对聚合物的结构进行了分析表征。结果表明：随着THF与环己烷体积比的增大,单体的转化率呈现下降的趋势;同时空间位阻较大的P配合物的加入,堵塞了正、负离子对之间的部分通道,有效地抑制了MMA段聚合副反应的发生,在易于工业化的0℃之下成功合成了分子量分布窄（1．21）的聚异戊二烯一聚甲基丙烯酸甲酯嵌段共聚物（PI—b—PMMA）,并且共聚物中PI嵌段以3,4结构链节为主。     

微嵌段疏水缔合聚合物/十二烷基硫酸钠溶液体系的流变特性

研究了疏水微嵌段长度和阴离子表面活性剂十二烷基硫酸钠(SDS)对聚/表体系的流变性的影响。研究表明,微嵌段长度对疏水缔合聚合物溶液的粘性有较大影响,嵌段越长聚合物越容易发生分子间缔合其溶液粘度越大。随着SDS的加入,各聚/表体系粘度短期内出现一个极值,然后降至一个稳定值,嵌段长度越长,其极值点越大。聚合物与SDS体系表现出的剪切增稠和粘弹性特征也随嵌段长度增加而增大。通过研究不同体系平台区模量(G0)和特征松弛时间(TR)的变化规律,发现嵌段长度和SDS含量对聚/表体系物理交联缔合点的密度有较大影响,对缔合点强度影响较小。本文有助于更好地解释微嵌段疏水缔合聚合物与表面活性剂相互作用的内在因素。     

醇-可聚合表面活性剂混合胶束法合成微嵌段缔合聚合物及其流变性

低碳醇与可聚合表面活性剂(surfmer)可以形成混合胶束, 本文通过稳态荧光猝灭法(SSFQ)测定了该混合胶束中可聚合表面活性剂的聚集数, 并通过绝热聚合和后水解工艺合成出不同微嵌段长度的较高分子量(M_w)缔合聚合物聚(丙烯酰胺-丙烯酸钠-十六烷基二甲基烯丙基氯化铵)[P(AM-NaAA-C₁₆DMAAC)]. 聚合物结构经傅里叶变换-红外(FT-IR)光谱和核磁共振碳谱(¹³C NMR)表征证实, 并通过流变性实验研究了微嵌段长度对增粘性能、抗盐性能、粘弹性能的影响规律. 实验结果表明: 该方法可以有效调节缔合聚合物中微嵌段的长度, 随着微嵌段长度增加, 临界缔合浓度(CAC)逐渐降低, 增粘性能、粘弹性能先逐步增加后逐步降低, 并且发现其对聚合物的性能的影响规律中存在最佳嵌段长度.     

RAFT聚合合成高分子量嵌段聚合物

以合成高分子量聚合物为目标,以苯基二硫代乙酸-1-苯基乙酯(PEPDTA)作为RAFT试剂,研究引发剂的种类(偶氮二异丁腈(AIBN)、1-1′-偶氮环己腈(ACC))、用量及聚合温度对苯乙烯/丙烯酸丁酯RAFT共聚合过程和聚合物结构的影响.结果发现,由于体系中RAFT浓度很低,相应的引发剂浓度要比传统自由基聚合低得多,只有采用较高的聚合温度和低分解速率常数的引发剂(ACC),才能制得无活性聚合物分率低(<0.1)、分子量高的聚合物,并进一步得到杂质含量少、分子量分布窄的嵌段聚合物.     

活性阳离子聚合法合成嵌段共聚物的研究进展

在８０年代,阳离子聚合研究的一个最重要突破可能就是活性阳离子聚合。目前为止,有关活性阳离子聚合的新引发体系,新单体及合成应用等方面已取得巨大进展,本综述主要介绍利用活性阳离子聚合合成二、三元嵌段和多元嵌段共聚物的研究成果。     

Fluorinated Amphiphilic Block Copolymers: Combining Anionic Polymerization and Selective Polymer Modification

We report the preparation of novel fluorinated block copolymers using a two-step modification sequence. We first prepared model polyisoprene-poly-tert-butylmethacrylate block copolymers by anionic polymerization. Exposing these materials to difluorocarbene (generated by the thermolysis of hexafluoropropylene oxide) resulted in modification of the polyisoprene block to the corresponding difluorocyclopropane repeating unit without compromising the integrity of the poly-tert-butylmethacrylate block. Hydrolysis of the difluorocarbene-modified materials gave the corresponding difluorocarbene-modified polyisoprene-polymethacrylic acid diblock copolymers. These amphiphilic materials are expected to exhibit interesting self-assembly behavior in aqueous solution.     

烯烃易位聚合制备遥爪聚合物及嵌段共聚物

遥爪聚合物因其聚合物链的两端带有反应性官能团,可用于制备嵌段、接枝、星形、超支化等具有特殊结构的聚合物,其制备方法主要包括传统自由基聚合与可控/“活性”自由基聚合、阴离子聚合、阳离子聚合、易位聚合和缩合聚合等。相比于其他的传统聚合方法,烯烃易位聚合是一种较为温和的、产物分子量及结构可控的聚合方法。本文主要概述在各种链转移剂的存在下,采用环烯烃的开环易位聚合(ring-opening metathesis polymerization, ROMP)和非环二烯易位(acyclic diene metathesis, ADMET)聚合制备带有各种官能团的遥爪聚合物以及与其他活性聚合方法(NMRP、ATRP、RAFT、ROP等)相结合制备嵌段共聚物的研究进展。     

Synthesis of Block Copolymers by Combination of Atom Transfer Radical Polymerization and Visible Light‐Induced Free Radical Promoted Cationic Polymerization

A new synthetic approach for the preparation of block copolymers by mechanistic transformation from atom transfer radical polymerization (ATRP) to visible light‐induced free radical promoted cationic polymerization is described. A series of halide end‐functionalized polystyrenes with different molecular weights synthesized by ATRP were utilized as macro‐coinitiators in dimanganese decacarbonyl [Mn₂(CO)₁₀] mediated free radical promoted cationic photopolymerization of cyclohexene oxide or isobutyl vinyl ether. Precursor polymers and corresponding block copolymers were characterized by spectral, chromatographic, and thermal analyses.     

Synthesis of New Graft Copolymers by Combining the DPE Technique and Cationic Polymerization

The synthesis of a new macroinitiator for cationic polymerization via radical polymerization is presented. The macroinitiator, consisting of poly(methyl methacrylate)‐block‐poly[styrene‐co‐(4‐chloromethylstyrene)], was synthesized by heating poly(methyl methacrylate), prepared in the presence of 1,1‐diphenylethylene, in a mixture of styrene and 4‐chloromethylstyrene to 85°C without any additional initiator. The resulting macroinitiator could be used for the cationic polymerization of isobutylene yielding graft copolymers.     

Thermoresponsive Block Copolymer–Protein Conjugates Prepared by Grafting‐from via RAFT Polymerization

Well‐defined “smart” block copolymer–protein conjugates were prepared by two consecutive “grafting‐from” reactions via reversible addition–fragmentation chain transfer (RAFT) polymerization. The initiating portion (R‐group) of the RAFT agent was anchored to a model protein such that the thiocarbonylthio moiety was readily accessible for chain transfer with propagating chains in solution. Well‐defined polymer‐protein conjugates of poly(N‐isopropylacrylamide) (PNIPAM) and bovine serum albumin (BSA) were prepared at room temperature in aqueous media. The retained trithiocarbonate moiety on the free end group of the immobilized polymer allowed the homopolymer conjugate to be extended by polymerization of N,N‐dimethylacrylamide. Polyacrylamide gel electrophoresis, size exclusion chromatography, and NMR spectroscopy confirmed the synthesis of the various conjugates and revealed that the polymerizations were well controlled. As expected, the resulting block copolymer–protein conjugates demonstrated thermoresponsive behavior due to the temperature‐sensitivity of the PNIPAM block, as evidenced by turbidity measurements and dynamic light scattering analysis.

     

界面聚合制备新型荷正电纳滤膜

以聚砜超滤膜为基膜,聚乙烯亚胺、均苯三甲酰氯为界面聚合单体,水和正己烷分别为两相溶剂,通过界面聚合方法制备荷正电纳滤膜。实验着重考察了Na2SO4-PEG400-H2O三元混合体系的分离情况,结果表明,该膜可有效地实现低分子量有机物与Na2SO4的分离;另外,随着Na2SO4或PEG400浓度的增大,膜对Na2SO4和PEG400的截留率有所降低。     

Synthesis of (meth)acrylate Block Copolymers by Ligated Anionic Polymerization

Synthetic potential of the ligated anionic polymerization (LAP) of acrylic and metacrylic esters initiated with methyl 2-lithioisobutyrate (MIB-Li) in the presence of an excess of alkali metal tert-alkoxides (prevailingly Li tert-butoxide) is presented. tert-Alkoxides form with ester-enolates, like MIB-Li, cross-aggregates of various composition, which tailor the environment of growing chain-ends, lower their nucleophilicity and restrict in this way the extent of side reactions, in particular self-termination of growing macroanions by back-biting reaction. Thus, stability of polymethacrylate living chains is sufficiently high for methacrylate and acrylate block copolymers to be synthesized. In the case of acrylate polymerization, reaction conditions must be optimized due to their high tendency to self-termination.     

Facile Fabrication of Concentrated Polymer Brushes with Complex Patterning by Photocontrolled Organocatalyzed Living Radical Polymerization

Photocontrolled surface‐initiated reversible complexation mediated polymerization (photo‐SI‐RCMP) was successfully applied to fabricate concentrated polymer brushes with complex patterning structures. Positive‐type patterned polymer brushes were obtained by photo‐SI‐RCMP under visible light (550(±50) nm) using photomasks. A particularly interesting finding was that negative‐type patterned polymer brushes were also obtainable in a facile manner. A nonspecial UV light (250–385 nm) enabled the preparation of pre‐patterned initiator surfaces in a remarkably short time (1 min), leading to negative‐type patterned polymer brushes. Based on this unique selectivity between visible and UV light, the combination of two patterning techniques enabled the preparation of complex patterned brushes, including diblock copolymers, binary polymers, and functional binary polymers, without multistep immobilization of one or more initiators on the surfaces.     

UV辐照接枝聚合制备亲水性纳滤膜

用紫外光引发自由基共聚接枝的方法对酚酞基聚芳醚酮(PEK-C)超滤膜表面进行改性制备了亲水性荷电纳滤膜. 研究了用不同单体接枝改性膜对盐溶液的截留性能, 证明了Donnan电荷效应对纳滤膜分离性能的影响. 在此基础上, 通过丙烯酸(AA)与对苯乙烯磺酸钠(SSS)的共聚接枝, 并改变它们在接枝液中的相对含量, 成功地制备出膜的表观截留率和渗透通量都较高的纳滤膜.