NaOH溶液中CdS纳米棒的水热合成

在NaOH溶液中水热合成了CdS纳米棒, 并探讨了NaOH溶液浓度和反应时间对CdS纳米棒形貌及晶体结构的影响及其可能的生长机理和母液循环可行性. 用粉末X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 高分辨透射电子显微镜(HRTEM)和选区电子衍射(SAED)对CdS纳米棒进行了表征, 并考察了其在可见光照射下光催化降解亚甲基蓝的活性. 结果表明, NaOH溶液是形成棒状形貌的关键因素. 在最优实验条件下, 可获得六方纤锌矿结构CdS纳米棒, 直径约200 nm, 长度可达4 μm. 该纳米棒具有良好的可见光光催化活性.     

微波固相合成氧化锌纳米棒

通过前驱体的微波固相热分解法快速合成了氧化锌纳米棒, 其直径在60～385 nm之间, 长可达数微米. 前驱体则通过一步室温固相反应制备. 用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、能量色散X射线分析(EDX)和透射电子显微镜(TEM)对产物的结构和形貌进行了表征. 同时, 对氧化锌纳米棒的光致发光(PL)性能作了测试, 结果表明在355 nm处有一个明显的近带隙发射峰. 另外, 对比实验表明, 微波辐射在氧化锌纳米棒的形成过程中起了关键性作用, 并对其形成机理进行了初步探讨.     

海藻酸锌纤维热降解法制备氧化锌纳米结构

采用天然高分子海藻酸钠为原料, 以氯化锌水溶液为凝固浴, 通过湿法纺丝技术成功制备了海藻酸锌(Alg-Zn)纤维.通过在空气中不同温度下对所得海藻酸锌纤维进行热处理, 得到了多种ZnO纳米结构. 利用热失重分析(TG)、X射线衍射(XRD)、电子能量损失谱(EELS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等手段对产物的组成、形貌和微观结构进行了详细表征. 结果表明, 焙烧温度和时间对所得ZnO纳米结构的尺寸和形貌具有重要影响; 800 ℃下热处理24 h以上可以得到直径约为120 nm的ZnO纳米棒. 通过仔细考察不同热处理时间得到的ZnO纳米结构, 提出了在焙烧条件下ZnO纳米棒的生长机理.     

以CuC2O4微球为模板可控合成一维CuC2O4/ZnO异质结构

以CuC2O4纳米微球为模板,通过水热法在120 ℃、1 h时成功合成了一维CuC2O4/ZnO异质结构。 采用热重分析（TGA）、场发射扫描电子显微镜（FE-SEM）、能量散射Ｘ射线谱（EDX）、透射电子显微镜(TEM)和Ｘ射线粉末衍射(XRD)等测试技术对产物的结构和形貌进行了表征。 结果表明,所得产物为一维CuC2O4/ZnO纳米棒束,长约1 μｍ,直径约500 nm。 每个棒束由许多纳米棒沿同一方向组装而成。 TEM照片和EDX光谱表明,CuC2O4和ZnO形成了均匀的异质结构。     

Sb_2Te_3纳米片的水热合成与表征

在水热条件下,以乙醇胺为还原剂,实现了亚碲酸根(TeO~(2-)_3)的分步还原,并以新生成的单质Te纳米棒为碲源,原位一步法合成出六方相Sb_2Te_3纳米片.采用X射线粉末衍射仪(XRD)、场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)等对产物的物相、形貌及组成进行了表征.结果表明,产物Sb_2Te_3为六方纳米片,厚度约为100~200 nm,直径约为0.6~1.5μm,形貌均一,分散性良好.适宜的合成条件是水/乙醇胺体积比为8∶12,180℃下反应24 h.依据部分实验结果以及单质Te和六方相Sb_2Te_3晶体结构的比较,证明了Sb_2Te_3主要以外延方式在单质Te纳米棒表面生长,且两者的晶面取向为(003)Te//(003)Sb_2Te_3,[110]Te//[110]Sb_2Te_3.     

尺寸可控氢氧化镧纳米棒的水热合成及表征

以硝酸镧为镧源、三乙胺为碱源和络合剂,通过简便的水热法成功合成了大量均一的氢氧化镧纳米棒。详细研究了三乙胺的用量、表面活性剂、反应温度和时间对产物形貌及尺寸的影响。基于实验结果,提出了氢氧化镧纳米棒的形成机理。同时制备了稀土掺杂的氢氧化镧纳米棒。利用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）和高分辨透射电子显微镜（HRTEM）对所得产物的物相、结构和形貌进行了表征分析。     

氮掺杂长竹节状碳纳米管的制备及其生长机理

采用电弧放电法,通过阳极棒与不锈钢片的共蒸发,制备了氮掺杂长竹节状碳纳米管(NDLBLCNTs)。借助扫描电子显微镜(SEM)、场发射高分辨透射电子显微镜(HRTEM)及其附带能量色散X射线(EDX)光谱仪和电子能量损失谱(EELS)、透射电子显微镜(TEM)等表征方法,对产物的形貌、结构和组成进行表征。表征结果表明,NDLBLCNTs的长度在640~835 nm之间,其内径在23~35 nm之间,外径在28~47 nm之间;且在每一节"竹节"与另一节"竹节"的连接处形成的内腔中均有一个黑色纳米颗粒,其直径尺寸以及产物中的NDLBLCNTs的含量均与熔化、蒸发的不锈钢片的面积有关。对NDLBLCNTs的生长机理进行了简单的探讨。     

生物分子辅助溶剂热合成硫化锑纳米棒

以SbCl3和L-胱氨酸为反应原料,采用溶剂热法在170℃反应12h,制得硫化锑(Sb2S3)纳米棒.X射线衍射(XRD)、能量分散光谱(EDS)和X射线光电子能谱(XPS)研究表明所得产物为典型的Sb2S3正交结构.场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)研究显示,Sb2S3纳米棒长为3～6μm,平均直径约为150nm.讨论了不同反应时间对Sb2S3的形成及其形貌的影响,并根据实验结果对所合成的一维纳米棒可能的形成机理进行了简单的探讨.     

Mn离子掺杂对α-FeOOH结构和形貌的影响

本文采用水热合成方法,在120℃碱性条件下制备出形貌均一的短棒状α-FeOOH纳米粒子,对其进行了金属离子Mn的掺杂。系统研究了Mn离子掺杂对产物物相结构和形貌的影响,对产物进行了X射线衍射(XRD)、红外光谱(IR)、穆斯堡尔谱(MES)、场发射扫描电镜(FE-SEM)和高分辨透射电子显微镜(HRTEM)表征。结果表明:低浓度Mn离子掺杂对α-FeOOH的形成起了形貌和物相调控作用。α-FeOOH纳米棒的长径比随着Mn离子加入量的增大逐渐增加;当nMn(Ⅱ)/nFe(Ⅲ)=0.30时,产物变成了α-(Fe,Mn)OOH和MnFe2O4的混合物,形貌为纳米棒和纳米颗粒。     

钛酸钠一维纳米结构的构筑

以锐钛矿TiO₂为起始原料,通过水热法制备了钛酸盐纳米棒,对合成不同长度和宽度的钛酸盐纳米棒的影响和控制条件进行了研究。用X射线衍射(XRD)和扫描电子显微镜(SEM)对纳米棒的形貌和结构进行了表征。结果表明水热温度和处理时间能对纳米棒的形貌和结构进行有效的控制,得到理想的钛酸盐的结构。在更高的温度下(200 ℃),钛酸盐纳米管将更快的转化为纳米棒,而随着处理时间的延长,其形貌结构发生有规律的变化。在96 h处理时间后纳米棒束的宽度为50 nm到1 μm,长度可以达到几十微米。对后处理中酸洗对产物的形貌和晶体结构的影响也进行了对比研究,发现在酸洗之前钛酸盐纳米棒结构就已经形成,但是酸洗能使产物的晶体结构产生变化,同时使纳米棒的表面形貌更加光滑规整。最后对比研究原料和产物的紫外-可见吸收光谱,发现纳米管/棒在250至350 nm处有宽带隙吸收。     

PbTe nanostructures: Microwave-assisted synthesis by using lead Schiff-base precursor,characterization and formation mechanism

Pure cubic phase lead telluride (PbTe) nanostructures have been produced by using a Schiff-base complex as a precursor in the presence of microwave irradiation. The Schiff base used as ligand was derived from salicylaldehyde and ethylenediamine. The Schiff-base complex was marked as [Pb(salen)]. In addition, the effect of the irradiation time and the type of reducing agent on the morphology and purity of the final products was investigated. The as-synthesized PbTe nanostructures were characterized extensively by techniques like X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The microwave formation mechanism of the PbTe nanostructures was studied by XRD patterns of the products. Although it was found that both ionic and atomic mechanisms could take place for the preparation of PbTe, the main steps were according to the atomic reaction process, which could occur between elemental Pb and Te.     

Synthesis of alpha-MoTe2 nanorods via annealing Te-seeded amorphous MoTe2 particles

Semiconductor alpha-MoTe2 nanorods have been synthesized by annealing Te-seeded particles of an amorphous MoTe2 intermediate. This intermediate is prepared by a solution reaction between Mo(CO)6 and elemental Te in diphenylmethane. The as-synthesized products were characterized by structural, compositional, and morphological techniques of X-ray diffraction, selected area electron diffraction, selected area energy dispersive spectroscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The results of the annealing process are MoTe2 nanorods with diameters of 50-200 nm and lengths ranging from 0.1 to 3.0 microm. Here, the rodlike structure of MoTe2 is reported for the first time, and added to the list as one kind of new morphology of MoTe2 nanomaterials. A mechanism for the formation of the nanorods is proposed. The sandwich-layered structure of Te-Mo-Te and the similarity in the structure between hexagonal alpha-MoTe2 and hexagonal Te are responsible for the formation of nanorods of MoTe2.     

A simple mixed-solvothermal route for LaPO4 nanorods: synthesis, characterization, affecting factors and PL properties of LaPO4:Ce3+

In this paper, LaPO(4) nanorods have been successfully synthesized via a simple water-ethyleneglycol (H(2)O-EG) mixed-solvothermal route, employing lanthanum nitrate (La(NO(3))(3)·xH(2)O) as a La(3+) ion source and monobasic sodium phosphate (NaH(2)PO(4)·2H(2)O) as a PO(4)(3-) ion source. The as-obtained products were characterized by means of X-ray powder diffraction (XRD), energy dispersive spectrometry (EDS), (high resolution) transmission electron microscopy (HR/TEM), selected area electron diffraction (SAED) and field emission scanning electron microscopy (FESEM). Some factors influencing the formation of LaPO(4) nanorods, including the reaction temperature, the volume ratio of water/EG and the original amount of H(2)PO(4)(-) ions, were investigated. Experiments showed that the volume ratio of water/EG and the original amount of H(2)PO(4)(-) ions could markedly affect the morphology of the final product.     

A facile route to growth of γ-MnOOH nanorods and electrochemical capacitance properties

Single crystal nanorods of γ-MnOOH with lengths up to hundreds of nanometers were successfully prepared employing a novel solvothermal process based on the redox reaction between potassium permanganate (KMnO(4)) and N, N-dimethyl ammonium formate (DMF) without extra surfactant or template. The as-prepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and Fourier transformed infrared spectroscopy (FTIR). The electrochemical properties of γ-MnOOH nanorods were investigated by cyclic voltammetry and galvanostatic charge-discharge performance measurements. Specific capacitance (C(s)) calculated from the galvanostatic discharge curve was 131.9 F g(-1) for γ-MnOOH nanorods at the current density of 0.5 A g(-1). The electrochemical experiment results demonstrate that γ-MnOOH nanorods should be a good candidate as electrode material for supercapacitor.     

WS2纳米棒的合成及其摩擦学性能

以十六烷基三甲基溴化铵(CTAB)作为表面活性剂,利用水热合成法在180℃条件下成功制备出WS2纳米棒。用XRD、SEM、TEM和HRTEM对WS2纳米棒的结构进行表征和分析,并提出了可能的生长机理。将WS2作为润滑油添加剂加到基础油中,用CETR UMT-2摩擦磨损仪测试其摩擦学性能。结果表明:WS2纳米棒作为润滑油添加剂表现出良好的摩擦性能。     

Preparation and characterization of gadolinium hydroxide single-crystalline nanorods by a hydrothermal process

The Gd(OH)3 nanorods with diameters of ca.40-60 nm and lengths of more than 400-550 nm have been prepared by a novelhydrothermal technique.The structural features and chemical composition of the nanorods were investigated by X-ray diffraction(XRD),transmission electron microscopy(TEM),and field emission scanning electron microscope(FESEM),selected areaelectron diffraction(SAED),and high resolution transmission electron microscopy(HRTEM).The possible mechanism for theformation of Gd(OH)3 nanorods was proposed.     

Synthesis and Characterization of La（OH）3 Nanorods by Hydrothermal Microemulsion Method

La（OH）3 nanorods with diameters of 20-40 nm and lengths of 200-300 nm were synthesized by a hydrothermal microemulsion method. The structure and morphology of the final products were characterized by X-ray powder diffraction （XRD）, transmission electron microscopy （TEM）, and field emission scanning electron microscope （FESEM）.