C60负离子化学的研究进展

中性的C60是很强的缺电子体,主要和亲核试剂进行化学反应.与之不同的是C60经还原生成负离子后,由缺电子变为富含电子,具有很强的亲核性质,可与亲电试剂进行反应.由于这种电子结构的变化,C60负离子进行的反应从机理至产物均有可能与中性富勒烯不同.从而丰富了富勒烯的反应方式和富勒烯产物的类型.结合我们的工作综述了C60负离子化学的研究进展,对丰富富勒烯化学、扩展富勒烯衍生物的种类及制备方法具有一定意义.     

金催化剂在联烯亲核加成反应中的应用

金催化联烯亲核加成反应是形成碳碳、碳氮、碳氧以及碳硫键的重要方法.综述了近年来金催化含碳、含氮、含氧以及含硫亲核试剂与联烯的亲核加成反应以及在不对称杂环化合物合成中的应用,并对各种反应历程的特点及其影响因素进行了讨论.     

亲核试剂在正离子聚合反应中的作用及其作用机理的研究

研究了亲核试剂对IB 1 ,3 二 (2 氯异丙基 )苯 (DiCumCl) TiCl4体系正离子聚合反应的规律 ,亲核试剂与增长的碳正离子作用的紫外光谱图 ;采用分子模拟 ,利用量子力学半经验方法计算了亲核试剂与质子反应的活化能 ,确定了不同亲核试剂与质子的作用能力 ;利用分子力学方法计算了在增长碳正离子末端的不同位置亲核试剂与之络合的稳定化能 ,根据能量最低原则确定了亲核试剂在碳正离子链端的作用位置 ;利用分子力学方法进行构象优化后 ,借助QEq方法得到了聚异丁烯碳正离子和聚苯乙烯碳正离子的电荷数值 .综合以上实验结果提出了亲核试剂在正离子聚合反应中的作用及其作用机理     

烯丙醇在亲核取代反应中的研究进展

烯丙醇的亲核取代反应在有机合成化学中具有十分重要的地位,该反应可被广泛应用于具有生物活性的药物以及天然产物的合成.烯丙基化反应也是一类十分重要的引入C-3结构单元的合成方法学.这种合成方法的优点在于双键的保留,使得分子的官能团可以进行进一步转化.传统的Tsuji-Trost烯丙基化方法会产生大量的废弃物,相比之下直接以烯丙醇烯丙基化方法是一种绿色的合成方法.综述了烯丙醇在路易斯酸或者布朗斯特酸催化下与不同的亲核试剂发生分子内和分子间亲核取代反应,构筑C—X(X=C,N,O,S)键的最新研究进展,涉及到芳基化合物、羰基化合物、氨基或者磺胺类化合物以及醇类等不同种类亲核试剂.最后就烯丙醇烯丙基化研究及应用中存在的问题和难点对其前景进行了展望.     

手性双氮氧-钪(Ⅲ)配合物催化硫醇、醇以及羧酸与环丙烷的不对称开环反应

正手性γ-硫取代和氧取代的羰基化合物广泛存在于天然产物及具有生理活性的分子中,而利用含硫和含氧的亲核试剂对环丙烷进行开环反应是获得该类化合物最有效和简单的方法之一.由于硫易与过渡金属配位使之中毒,且羧     

贫电子环丙烷衍生物的化学

综述了贫电子环丙烷衍生物——顺式-1,2-二取代-6,6-二烷基-5,7-二氧螺- [2,5]-4,8辛二酮与含氧、氮、硫等亲核试剂反应的研究进展。     

有机小分子催化的β-酮酯不对称α-官能化反应

有机小分子催化的不对称反应是目前有机化学的研究热点之一。β-酮酯是一类具有活泼次甲基的"软"亲核试剂,可以在有机碱或者金属路易斯酸的催化下进行α-官能化反应。本文详细介绍了有机催化的β-酮酯不对称α-官能化反应的最新研究进展,并对不同亲电试剂参与β-酮酯的α-官能化反应进行了简要评述。     

靛红衍生的硝酮与酮亚胺的不对称直接氮杂插烯Mannich反应

不对称直接插烯Mannich反应是一类高效构建手性δ-氨基-α,β-不饱和羰基化合物的方法,但这类反应主要局限于以γ-丁烯酸内酯及类似物和α,α-二氰基烯烃等作为亲核试剂前体,因此发展新的插烯亲核试剂尤为重要.本工作报道了一类从靛红衍生且含N-CH结构的硝酮化合物,由于氧化吲哚骨架的强吸电子效应能在温和碱性条件下生成氮杂二烯醇中间体,高效与靛红衍生的亚胺发生直接氮杂插烯Mannich反应.采用金鸡纳碱衍生的手性双功能叔胺硫脲催化剂,以高收率（70%～97%）、高立体选择性（83%～99% ee,>19∶1 dr）合成富官能团化并含相邻季碳-叔碳手性中心的硝酮化合物,且可进一步与缺电烯烃发生[3+2]偶极环加成反应构建含有氢化异噁唑环的吲哚螺环复杂骨架.这类靛红衍生的硝酮作为氮杂插烯亲核试剂可能在不对称合成中具有更为广阔的应用.     

烯醇硅醚对[60]富勒烯的亲核加成反应

在空气气氛和非极性溶剂(甲苯)中1-(4'-甲氧基苯基)-1-三甲基硅氧基乙烯与[60]富勒烯反应得到了非预计的环丙基骈[60]富勒烯衍生物(5).在无氧和极性非质子性溶剂(THF)中进行上述反应,得到了1,2-取代[60]富勒烯亲核加成产物(3)。对反应的机理作了合理的阐述。     

过渡金属络合物在精细有机合成中的应用

过渡金属化学已发展成为有机合成的重要方法,本文综述了它在精细有机合成中应用的一些进展。叙述了金属有机化合物作为亲电体与亲核试剂反应,金属有机化合物作为亲核体与亲电试剂反应,以及偶合和环化反应。应用这些反应可以巧妙地合成若干天然产物。     

Aziridinofullerene: a versatile platform for functionalized fullerenes

An aziridine moiety on the fullerene core can serve as an acid-triggered reacting template for the controlled synthesis of a range of functionalized fullerenes that are otherwise difficult to synthesize in an efficient and selective manner. A copper-catalyzed aziridination of C(60) for the practical synthesis of aziridinofullerene 1 and acid-catalyzed reactions of 1 with mono- and bifunctional nucleophiles as well as alkynes are described. The rapid generation of structural diversity in a single chemical operation using the common platform 1 is notable.     

有机富勒烯化合物的逆环加成反应

逆环加成反应是富勒烯衍生物的一种重要反应。在还原、氧化或加热条件下,许多富勒烯衍生物的加成基团会从富勒烯骨架上断开,得到富勒烯母体,是富勒烯环加成反应的逆反应。该反应与富勒烯环加成反应结合,已被应用于富勒烯化学中保护/去保护基团方法,对于选择性制备富勒烯及其衍生物具有重要意义。然而由于逆环加成反应的存在,引起了有机富勒烯化合物的不稳定,从而可能影响其在实际中的应用。最近,我们研究了一系列含有亚胺酯杂原子环结构的富勒烯噁唑衍生物在电化学还原下的稳定性,结果表明加成基团之间存在的分子内C-H…X（X = N,O）氢键对化合物的稳定性可能起着较为关键的作用。在此,我们将结合我们的工作对有机富勒烯化合物的逆环加成反应进行综述。     

Monomeric fullerenes in lipid membranes: effects of molecular shape and polarity

We report a combined theoretical and experimental study on the single-molecule interaction of fullerenes with phospholipid membranes. We studied pristine C(60) (1) and two N-substituted fulleropyrrolidines (2 and 3), one of which (3) bore a paramagnetic nitroxide group. Theoretical predictions of fullerene distribution and permeability across lipid bilayers were combined with electron paramagnetic resonance (EPR) experiments in aligned DMPC/DHPC bicelles containing the paramagnetic fulleropyrrolidine 3 or either one of the diamagnetic fullerenes together with spin-labeled lipids. We found that, at low concentrations, fullerenes are present in the bilayer as single molecules. Their preferred location in the membrane is only slightly influenced by the derivatization: all derivatives were confined just below the hydrophilic/hydrophobic interface, because of the key role played by dispersion interactions between the highly polarizable fullerene cage and the hydrocarbon chains, which are especially tight within this region. However, the deviation from spherical shape is sufficient to induce a preferential orientation of 2 and 3 in the membrane. We predict that monomeric fullerenes spontaneously penetrate the bilayer, in agreement with the results of molecular dynamics simulations, but we point out the limits of the currently used permeability model when applied to hydrophobic solutes.     

Studies on the encapsulation of various anions in different fullerenes using density functional theory calculations and Born-Oppenheimer molecular dynamics simulation

The density functional theory (DFT)-based Becke's three parameter hybrid exchange functional and Lee-Yang-Parr correlation functional (B3LYP) calculations and Born-Oppenheimer molecular dynamics (BOMD) simulations have been performed to understand the stability of different anions inside fullerenes of various sizes. As expected, the stability of anion inside the fullerene depends on its size as well as on the size of the fullerene. Results show that the encapsulation of anions in larger fullerenes (smaller fullerene) is energetically favorable (not favorable). The minimum size of the fullerene required to encapsulate F(-) is equal to C(32). It is found from the results that C(60) can accommodate F(-), Cl(-), Br(-), OH(-), and CN(-). The electron density topology analysis using atoms in molecule (AIM) approach vividly delineates the interaction between fullerene and anion. Although F(-)@C(30) is energetically not favorable, the BOMD results reveal that the anion fluctuates around the center of the cage. The anion does not exhibit any tendency to escape from the cage.     

Co-aggregation of fullerene C60 and thiophene in the non-aromatic solvent cyclohexene

Co-aggregation of fullerene C₆₀ and thiophene has been studied calorimetrically in cyclohexene at 25 °C. The total aggregation heat is found to depend on initial concentration of thiophene and fall between −1.9 and −5.8 kJ mol⁻¹. The corresponding thiophene/fullerene molar ratio (“co-aggregation number”) ranges from 7 to 12. The data are rationalized by formation of heteromolecular nanoaggregates with intermolecular contacts of both fullerene–thiophene and fullerene–fullerene types. A physical model describing interaction between fullerenes and π-donors in solution is substantiated and used to explain heterogeneity of composites containing fullerenes.     

Electrochemistry of fullerenes immobilized on the electrodes

The main methods of fullerene immobilization on solid electrodes are briefly reviewed. The effect of the procedures of immobilization and introduction of donor substituents into fullerene on the electrochemical (and spectral) characteristics is considered. A general classification of fullerene coatings is proposed. The coatings can be grouped as (i) the phase films of individual fullerenes and (ii) the composite films of fullerenes, which are dispersed in/on the matrixes of various natures. It is concluded that the main parameters of redox conversions of phase films are determined by the retardation of matrix restructurization in the doping and, in the case of dispersed fullerenes, by the character of their interaction with other components of composition. The correct results for the dispersed systems can be obtained only by using the reference electrode with a potential virtually independent of solvent nature.     

THE PHOTOADDITION OF NUCLEOPHILES TO URACIL

Abstract— Quantum yields for 254 nm ultraviolet photoaddition of the nucleophiles hydrazine, HCN, HSO₃^-, methyl amine, and BH₄^- to uracil have been measured; the quantum yields for hydrazine, HCN, and HSO₃^- additions are pH-dependent. The nucleophiles sulfide, azide, chloride, bromide, iodide, nitrite and thiocyanate failed to photo–add under similar conditions. These reactions are interpreted as 1,4-additions to the conjugated enone system of the anti-aromatic compound, uracil; as suggested by S. Y. Wang (Wang and Nnadi, 1968). The nuclear magnetic resonance (NMR) spectrum of the photohydrate of uracil-5-d-showed that the proton was added to the 5-position in a stereochemically random manner. The photoaddition of HSO₃^- takes place at much lower concentrations than required for the thermal addition of this anion and is also stereochemically random.     

富勒烯合成化学研究进展

富勒烯是一类由12个五元环和若干六元环组成的笼状分子, 自20世纪80年代中期被发现以来就以其独特的结构和新奇的性质而成为科学界研究的热点, 25年来, 无论在基础研究还是在实际应用领域都有了长足的进步, 人们在发展富勒烯合成新方法和寻找富勒烯新结构方面做了大量的工作。本文对富勒烯的各种宏量合成方法进行了回顾, 并概述了迄今已发表的60余种富勒烯新结构,包括各种富勒烯空笼、内嵌富勒烯、富勒烯笼外修饰衍生物及氮杂富勒烯等结构。     

Absorption spectrophotometric study of supramolecular complexation of [60]- and [70]fullerenes with 24,26-dimethoxy-25,27-dihydroxy calix[4]arene

Supramolecular interactions of 24,26-dimethoxy-25,27-dihydroxy calix[4]arene (1) with [60]- and [70]fullerenes have been studied in only chloroform and in a ternary solvent mixture comprising of chloroform, ethyl alcohol and toluene by UV-vis absorption spectrophotometric method. The experimental results are explained using the model that takes into account the interaction between electronic subsystems of 1 and fullerene. The most interesting feature is the preference of [60]fullerene over [70]fullerene for 1 in ternary solvent mixture as revealed by higher value of formation constant of [60]fullerene/1 complex. The selectivity towards [60]fullerene opens up the way toward self-assembling systems and new separation and purification methods for fullerenes.