共查询到20条相似文献,搜索用时 171 毫秒
1.
烷基链封端的两亲性超支化聚缩水甘油的合成及自组装 总被引:3,自引:0,他引:3
通过阳离子开环聚合和端基改性的方法合成了以亲水性超支化聚缩水甘油为核和疏水性十六烷基链为臂的两亲性超支化多臂共聚物(HPG-g-C16),研究了十六烷基疏水臂的接枝率对该两亲性聚合物在溶剂中自组装行为的影响.结果表明:接枝率45%以上的HPG-g-C16在四氢呋喃(THF)中以单分子胶束的形式存在,在THF与水的混合溶剂中会自组装形成尺寸为1~10 μm的巨型囊泡,而接枝率为15% 的HPG-g-C16能直接在水中自组装形成球形胶束. 相似文献
2.
3.
聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物的两亲性及其胶束行为研究 总被引:1,自引:0,他引:1
采用丙氨酸作为疏水聚合单体,谷氨酸作为亲水聚合单体,一步开环聚合反应,合成了具有两亲性的聚氨基酸无规共聚物.利用IR,1H-NMR等方法对所合成的聚合物进行了详细的表征,结果表明两种单体都能够按照投料比参加聚合反应生成无规共聚物.对比聚丙氨酸-聚羟丙谷氨酰胺嵌段共聚物,探讨了无规共聚物与嵌段共聚物在两亲性及结构性质上的差异和特点.研究表明,聚(L-丙氨酸-co-羟丙-L-谷氨酰胺)无规共聚物与嵌段共聚物一样,具有两亲性,在水溶液中也能够形成胶束,但胶束尺寸较嵌段共聚物要小,胶束形态也不像嵌段共聚物是规整的球形.实验发现,亲疏水单体的比例对胶束的形成有很大影响,P(A10-co-HPG40)所制得的胶束分散最为均匀.所形成的胶束以疏水的聚丙氨酸为内核,亲水的聚羟丙谷氨酰胺为外壳. 相似文献
4.
疏水改性聚丙烯酰胺溶液的分子模拟 总被引:1,自引:0,他引:1
设计了几种不同的非离子型改性聚丙烯酰胺(HM-PAM)和阴离子型改性聚丙烯酰胺(HM-HPAM). 通过分子动力学模拟(MD)方法研究了在聚合物链上加入不同疏水改性单体对提高聚丙烯酰胺耐盐性的影响, 考察了盐浓度对疏水改性聚丙烯酰胺的回旋半径(Rg)、 特性黏数([η])、 径向分布函数(RDF)和均方位移(MSD)的影响以及聚合物的微观结构与特性黏数之间的关系. 研究结果表明, 引入疏水改性单体后, 改性聚丙烯酰胺具有较好的耐盐性. 通过研究非键作用与氢键相互作用可知, 体系中溶质和溶剂间的相互作用及氢键作用越弱, 溶液的特性黏数越大. O-H原子对的RDF结果表明, 聚合物链的伸展与聚合物链及官能团间的相互作用有关. 当RDF峰较弱时, 聚合物链与水的作用越弱, 越有利于聚合物链保持舒展状态, 溶液的特性黏数也就越大. 另外, 从聚合物链的MSD曲线发现, 聚合链的移动性与特性黏数呈负相关. 相似文献
5.
对比研究了牛血清蛋白(BSA)与部分水解的未改性聚丙烯酰胺(PAM-AA)、疏水改性聚丙烯酰胺(PAM-C12)和含有丙烯酸基团的疏水改性聚丙烯酰胺(PAM-C12-AA)之间的相互作用.等温滴定量热实验结果表明,除PAM-C12外,其他聚合物与BSA的结合焓均为放热,随AA含量的增加,放热焓值增大.与PAM和PAM-C12相比,PAM-C12-AA能够诱导BSA二级结构和微环境的明显变化,表明疏水性和电荷密度均对聚合物与BSA相互作用有重要影响.另外,不同浓度的PAM-C12-AA与BSA的作用方式不同,当聚合物的浓度略高于临界胶束浓度(CMC)时,由于聚合物的量较少,BSA分子改变其构型从而最大程度地与聚合物结合;当聚合物的浓度远高于CMC时,更多的聚合物链结合到BSA分子的正电荷"patch"上,PAM-C12-AA与BSA的紧密聚集体利于BSA二级结构的稳定. 相似文献
6.
针对深水钻井中水基钻井液易形成天然气水合物从而导致钻井作业无法正常进行的问题,利用自行设计研制的气体水合物反应装置,模拟深水钻井温度压力条件,对水基钻井液添加剂进行了天然气水合物形成的实验研究。分析了各实验体系形成水合物的过冷度。以过冷度为评价指标,评价了各种钻井液添加剂在深水钻井水合物形成过程中的作用。结果表明,在钻井液使用的加量范围内,阳离子聚丙烯酰胺CPAM、两性离子聚合物FA367等对天然气水合物的形成有抑制作用,且随着加量的增加抑制作用增强;磺甲基丹宁SMT、木质素磺酸盐FCLS对天然气水合物的形成有微弱的促进作用,但影响不大。聚合物添加剂的离子类型对天然气水合物的形成影响不大。 相似文献
7.
海底天然气开采过程中,甲烷和水可以形成天然气水合物,阻塞油气管道。本文先简要介绍高分子化合物用于水合物抑制剂的发展过程,从抗冻抑制剂的结构与性能关系,探讨了高分子型的低剂量天然气水合物抑制剂的特性、作用机理和主要影响因素。近年来的研究发现在寒冷地区海洋鱼类和昆虫体内存在一些抗冻蛋白,不仅能够降低水的冰点,而且能抑制天然气水合物的形成,是绿色环保的天然抑制剂,模拟这些具有抗冻性能的蛋白质结构的高分子化合物为今后水合物抑制剂研究提供一个新的发展方向。本文还提出了今后值得开展研究和应用的若干问题。 相似文献
8.
采用饥饿法将2-甲基丙烯酰氧乙基磷酰胆碱(MPC)分别与甲基丙烯酸十八烷基酯(SMA)、 甲基丙烯酸十二烷基酯(LMA)及甲基丙烯酸正丁酯(BMA)聚合, 通过改变投料比例和沉淀剂种类, 合成了一系列含磷酰胆碱基团的仿细胞膜结构的两亲性二元随机共聚物. 1H NMR和元素分析结果表明, 合成的两亲性二元随机共聚物的组成与投料比相近. DSC结果表明, 聚合物具有较低的玻璃化转变温度. 表面张力及水的动态接触角(DCA)研究发现, 聚合物涂层表面具有明显的两亲性及表面结构易变性, 在空气中憎水基团在表面取向, 在水环境中亲水的磷酰胆碱基团则迁移取向到涂层表面形成仿细胞外层膜结构界面, 最终形成不溶于水的仿细胞膜结构涂层. 相似文献
9.
采用分子动力学方法研究了吸附在聚二甲基硅氧烷(PDMS)和接枝聚磺酸基甜菜碱甲基丙烯酸甲酯(pSBMA)改性后的防污材料膜水化层内的水分子的结构及其动力学性质, 从微观角度解释了聚合物膜具有防污性能的原因. 模拟发现: (1)紧靠聚合物膜形成的水化层是聚合物具有防污性能的关键因素, 该水化层是溶液中的粒子(包括蛋白质分子)与聚合物膜相接触时所要克服的最主要的物理能障; (2)相对PDMS聚合物膜而言, 双离子特性自组装膜(pSBMA)在氢键、静电力的共同作用下, 可以形成空间笼状水分子网结构对水分子具有更强的束缚作用并有效降低水分子的可运动性, 形成的稳定水化层使得pSBMA具有更强的阻碍蛋白质吸附的能力. 相似文献
10.
疏水星形PCL与PCL-b-PEG两亲共聚物的自组装研究 总被引:1,自引:0,他引:1
用疏水星形聚合物模拟疏水性药物,研究其与两亲聚合物的自组装,探讨两亲性聚合物包载疏水性药物的机理.用开环聚合合成了5种两亲聚己内酯-聚乙二醇两嵌段共聚物(PCL-b-PEG)和4种疏水星型聚己内酯(star-branched polycaprolactone,SPCL),使用相分离法使PCL-b-PEG与SPCL进行自组装.浊度、SEM、动态光散射(dynamic light scattering,DLS)和FTIR结果表明,PCL-b-PEG与SPCL能够进行自组装,而且PCL-b-PEG中PEG长度和PCL含量对自组装有影响;PCL-b-PEG/SPCL形成的自组装体的粒径与SPCL的臂长、臂数和加入量有关. 相似文献
11.
聚乙烯基吡咯烷酮修饰多壁碳纳米管的研究 总被引:4,自引:2,他引:2
采用超声波辅助技术,研究了两亲性聚合物聚乙烯基吡咯烷酮(PVP)修饰多壁碳纳米管(MWNTs)的效果、作用机理及影响因素.研究结果表明在适合的条件下两亲性聚合物PVP可以被引入到多壁碳纳米管表面,修饰后的MWNTs在DMF、乙醇和水等溶剂中具有良好的分散性.通过红外光谱(FTIR)和拉曼光谱(Raman)分析表明,两亲性聚合物与MWNTs之间产生了化学接枝作用,高分辨透射电镜分析表明两亲性聚合物不均匀地存在于MWNTs的表面和端部.两亲性聚合物的浓度对接枝量的影响不大,但超声波作用时间对MWNTs表面两亲性聚合物PVP的接枝量有较大的影响,在超声时间为4h时接枝量最大.两亲性聚合物修饰效果不同于表面活性剂,采用表面活性剂十二烷基苯磺酸钠(SDBS)修饰的MWNTs经过洗涤过滤后,不能重新溶于水中,而两亲性聚合物PVP修饰的MWNTs可以重新溶解. 相似文献
12.
热分析技术研究疏水缔合微区对含氟丙烯酸酯共聚物凝胶中水状态的影响 总被引:2,自引:0,他引:2
丙烯酸 (AA)与不同含量的 2 (N 乙基全氟辛烷基磺酰胺 )乙基甲基丙烯酸酯 (FMA)在叔丁醇中进行自由基共聚 ,合成了一系列疏水改性共聚物凝胶 .用示差扫描量热法 (DSC) ,热失重分析 (TGA)研究了含氟疏水改性凝胶中水的状态 ,证明FMA改性凝胶中存在 3种状态的水 ,即不可冻结水 ,可冻结结合水和自由水 .对于未改性凝胶和FMA含量为 1mol%的疏水改性凝胶 ,在凝胶中水含量分别低于 0 60 9mol%和 0 698mol%时 ,DSC升温曲线上观察不到熔融峰 ,说明凝胶中存在不可冻结水 .提出计算凝胶中 3种状态的水含量和熔融焓的理论假设 .计算出FMA含量为 1mol%的疏水改性凝胶中自由水和可冻结结合水的摩尔熔融焓分别为75 89 0 3和 6864 0 6J mol.计算结果表明疏水改性后 ,单位聚合物单元上结合的可冻结水数目 (n1 )和非冻结水的数目 (n0 )都增加 相似文献
13.
Studies of relationship between polymer structure and hydration environment in amphiphilic polytartaramides
下载免费PDF全文
![点击此处可从《Journal of Polymer Science.Polymer Physics》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Yongmei Chi Songjie Xu Xin Xu Yuting Cao Jian Dong 《Journal of Polymer Science.Polymer Physics》2017,55(2):138-145
The relationships between the chemical structures and hydration environment of the polymers can provide significant insight into the water‐amphiphilic polymer interactions. Here, the hydrophobicity of amphiphilic block copolymers poly(ethylene tartaramide‐b‐alkyl isocyanate) is gradually tuned by using of a series of pendant alkyl (isopropyl, n‐butyl, cyclopentyl, and cyclohexyl) groups. Dynamics of hydration probed by low‐field NMR relaxometry exhibits a heterogeneous environment of water molecules, corresponding to tightly bound water with slow re‐orientational mobility and loosely bound water with fast re‐orientational mobility. Progressively larger amounts of bound water are present in the copolymers, ongoing from pendant isopropyl, n‐butyl, cyclopentyl, and finally to cyclohexyl group. Water in the copolymer bearing the cyclohexyl group has a significantly high partial specific heat capacity. Therefore, hydrophobic interaction between the polymer and water is enhanced when the hydrophobicity of the polymer is increased, resulting in considerable hydrophobic hydration with decreased mobility of the bound water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 138–145 相似文献
14.
The hydrophobic nature of recycled rubber particles presently limits their use only in non-aqueous media. Recycled rubber particles were chemically modified by preparation of amphiphilic semi-interpenetrating polymer networks using poly(acrylic acid) as the hydrophilic polymer. The resulting composite particles are water dispersible and suitable for various aqueous media applications. 相似文献
15.
Alves de Rezende C Lee LT Galembeck F 《Langmuir : the ACS journal of surfaces and colloids》2008,24(14):7346-7353
The interfacial behavior of silica nanoparticles in the presence of an amphiphilic polymer poly( N-isopropylacrylamide) (PNIPAM) and an anionic surfactant sodium dodecyl sulfate (SDS) is studied using neutron reflectivity. While the nanoparticles do not show any attraction to hydrophilic and hydrophobic surfaces in pure water, presence of the amphiphilic polymer induces significant adsorption of the nanoparticles at the hydrophobic surface. This interfacial behavior is activated due to interaction of the nanoparticles with PNIPAM, the amphiphilic nature of which leads to strong adsorption at a hydrophobic surface but only weak interaction with a hydrophilic surface. The presence of SDS competes with nanoparticle-PNIPAM interaction and in turn modulates the interfacial properties of the nanoparticles. These adsorption results are discussed in relation to nanoparticle organization templated by dewetting of charged polymer solutions on a solid substrate. Our previous studies showed that nanoparticle assembly can be induced to form complex morphologies produced by dewetting of the polymer solutions, such as a polygonal network and long-chain structures. This approach, however, works on a hydrophilic substrate but not on a hydrophobic substrate. These observations can be explained in part by particle-substrate interactions revealed in the present study. 相似文献
16.
Zhang R Seki A Ishizone T Yokoyama H 《Langmuir : the ACS journal of surfaces and colloids》2008,24(10):5527-5533
Reduction of hydrophobic interaction in water is important in biological interfaces. In our previous work, we have found that poly(styrene- b-triethylene glycol methyl ether methacrylate) (PS-PME3MA) segregates the PME3MA block to the surface in hydrophobic environment, such as in air or in a vacuum, and shows remarkable resistance against adsorption or adhesion of proteins, platelets, and cells in water. In this paper, we report that atomic force microscopy (AFM) with hydrophobic probes can directly monitor the reduced hydrophobic interaction of the PS surfaces modified by poly(styrene- b-origoethylene glycol methyl ether methacrylate) (PS-PME NMA), where N is the number of ethylene glycol units. The pull-off forces between the hydrophobic probes that are coated with octyltrichlorosilane (OLTS) and the PS-PME NMA modified polystyrene (PS) surfaces in water were measured. The absolute spring constants and tip-curvatures of the AFM cantilevers were measured to compute the work of adhesion by the Johnson, Kendall, and Roberts (JKR) theory, which relates the pull-off force at which the separation occurs between a hemisphere and a plane to the work of adhesion. The hydrophobic interactions between the hydrophobic tip and polymer surfaces in water were greatly reduced with the segregated PME NMA blocks. The hydrophobic interactions decrease with increasing N of the series of PS-PME NMA and show a correlation with the amount of protein adsorbed. 相似文献
17.
Matsuoka H Maeda S Kaewsaiha P Matsumoto K 《Langmuir : the ACS journal of surfaces and colloids》2004,20(18):7412-7421
Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment. 相似文献
18.
19.
Bound water molecules, the fraction of water molecules that are present in the hydration shells of polymers, lose their rotational mobility in the time scale of 10-50 ps, leading to additional ordering compared with unperturbed water. The amount of bound water per number of carbons in the nonpolar groups as measured by the method of waveguide dielectric resonance increased in the following order: hydrophobically modified chitosan < globular protein < hydrophobically modified polyacrylamide. The hydrophobic modification of acrylamide and chitosan polymers gave smaller variation in hydration than did both the coil-to-globule transition of poly(N-isopropylacrylamide) and the masking of nonpolar groups within the protein globule. 相似文献
20.
Lu H Su F Mei Q Zhou X Tian Y Tian W Johnson RH Meldrum DR 《Journal of polymer science. Part A, Polymer chemistry》2012,50(5):890-899
A series of new poly[N-(2-hydroxypropyl)methacrylamide]-based amphiphilic copolymers were synthesized through a radical copolymerization of a monomeric/hydrophobic fluorophore possessing aggregation-induced emission (AIE) property with N-(2-hydroxypropyl)methacrylamide. Photophysical properties were investigated using UV-Vis absorbance and fluorescence spectrophotometry. Influences of the polymer structures with different molar ratios of the AIE fluorophores on their photophysical properties were studied. Results show that the AIE fluorophores aggregate in the cores of the micelles formed from the amphiphilic random copolymers and polymers with more hydrophobic AIE fluorophores facilitate stronger aggregations of the AIE segments to obtain higher quantum efficiencies. The polymers reported herein have good water solubility, enabling the application of hydrophobic AIE materials in biological conditions. The polymers were endocytosed by two experimental cell lines, human brain glioblastoma U87MG cells and human esophagus premalignant CP-A, with a distribution into the cytoplasm. The polymers are non-cytotoxic to the two cell lines at a polymer concentration of 1 mg/mL. 相似文献