杯芳烃衍生物和丙烯酰胺作为复合功能单体的分子印迹聚合物对海因类化合物的选择性识别研究

以杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体,将其运用到分子印迹技术中,对海因类化合物R-苄基海因进行选择性识别.研究结果表明,由单一的杯[4]芳烃衍生物或丙烯酰胺作为功能单体的分子印迹聚合物对R-苄基海因的选择性均不高,而由杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体的分子印迹聚合物对模板分子具有较高的特异选择性.     

一种含芘葡萄糖衍生物的合成及其胶凝行为

合成并表征了一种荧光活性小分子胶凝剂——芘磺酰基-丙二胺-葡萄糖(PSDAPG), 考察了其在36种常见溶剂中的胶凝行为. 结果发现, PSDAPG可使其中16种溶剂胶凝. 对癸醇, PSDAPG表现出罕见的超级胶凝能力, 室温下最低胶凝浓度(MGC)达7.0×10-4 g·mL-1. 此外, PSDAPG还是一种既可胶凝水又可胶凝有机溶剂的双性胶凝剂. 扫描电镜(SEM)、傅立叶变换红外光谱(FTIR)、核磁共振(1HNMR)和荧光光谱研究表明,在不同溶剂中, PSDAPG具有不同的聚集结构, 除了芘基之间的疏水π-π堆积作用外, 氢键作用是PSDAPG自发形成三维网络结构的重要驱动力. 实验研究还表明, 溶液态和凝胶态的PSDAPG荧光光谱均同时呈现芘的单体荧光和激基缔合物荧光光谱特征, 但两者的光谱形貌差异显著. 随凝胶的形成, 体系单体荧光发射增强, 激基缔合物荧光发射减弱,表明形成的三维网络结构阻碍了PSDAPG中芘单元的运动性, 使得以Birks途径形成激基缔合物的效率降低.     

基于杯芳烃和紫精的电刺激响应二元水凝胶

基于上缘四脯氨酸修饰杯[4]芳烃和各种紫精客体分子的相互作用, 我们构筑了一类新型的二元超分子水凝胶. 得到结果显示, 在酸性条件下, 溴化紫精盐最易于促进四脯氨酸修饰杯[4]芳烃形成水凝胶. 并且经落球法测定了所制备水凝胶的凝胶-溶胶转变温度, 采用原子力显微镜和扫描电子显微镜表征了水凝胶的微观形态, 发现紫精的侧链对水凝胶性质具有显著影响, 包括凝胶-溶胶转变温度和微观形态. 值得注意的是, 该类水凝胶不仅具有优良的电刺激响应性, 而且能够通过化学、pH和热等多种因素进行调控.     

简便合成新型四桥联双杯[4]管道和1,2-3,4-双桥联杯[4]芳烃

报道了一种间接缩合法高产率简便合成新型四桥联双杯[4]管道和1,2-3,4-双桥联杯[4]芳烃.杯[4]二酰肼衍生物2与丁二酸酐发生开环反应,以95%的产率得到杯[4]羧酸衍生物4.化合物4在DCC/DMAP/CH2Cl2体系中发生分子间自缩合反应,以90%产率得到新型四桥联双杯[4]管道6.改用高度稀释的条件则以26%的产率得到新型1,2-3,4-双桥联杯[4]芳烃5.新化合物的结构与构象经元素分析、红外、质谱、核磁共振谱等表征证实.     

温度敏感聚(N-异丙基丙烯酰胺-co-甲基丙烯酰氧乙基二甲基辛基溴化铵)水凝胶的溶胀性能研究

由于改变亲水／疏水单体比值、与离子单体共聚心、改变凝胶内部结构等均可不同程度地调整温敏水凝胶的溶胀性能,本研究选择一种既含疏水烷基又含季铵盐正离子型亲水基团的两亲性单体——甲基丙烯酰氧乙基二甲基辛基溴化铵（ADMOAB）,结构如示意图1所示．与N-异丙基丙烯酰胺（NIPAM）聚合,制备了P（NIPAM-co-ADMOAB）共聚水凝胶,以便在引入离子型结构单元的同时,改变凝胶体系中亲水／疏水单体比值,避免单纯增加疏水单体引起的水凝胶溶胀性降低问题,并考察了ADMOAB对水凝胶溶胀性能的影响,对该类水凝胶迄今鲜见相关文献报道．该研究对进一步了解水凝胶的构效关系、探索有效控制溶胀性能的途径具有积极意义．     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性能研究

杯芳烃是继冠醚、环糊精之后的第三代主体分子[1].据文献[2,3]报道,在杯[4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对Na+有很高的选择性,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对Na+的配位,而且配位基团所形成的包络空间大小与钠离子相匹配.一般认为,随着包络空间改变,对金属离子的识别作用会有所变化[4].但目前对这方面的工作并没有给予更多的重视.我们发现,用2-溴甲基苯甲酸甲酯与杯[4]芳烃反应,得到了一种新的四取代杯[4]芳烃衍生物[2]萃取研究结果表明,该化合物对钾离子有较好的选择性.此外,在合成该衍生物的过程中,还得到了另一新的二取代衍生物(3).     

新型偶氮杯[4]芳烃的合成与构象研究

使用相应的w-硫醚羧酸酰氯与杯[4]芳烃或者偶氮杯[4]芳烃酰化合成了一类新型的杯[4]芳烃衍生物。分离得到六个新化合物4a-4c和5a-5c，并使用MALDI, EA, ¹H和¹³C NMR进行了表征。NMR图谱表明偶氮杯[4]芳烃衍生物 5a-5c均为1,3-转换构型，而4a-4c则均为锥式构型。对偶氮杯[4]芳烃衍生物5a-5c的红外和紫外性质也进行了研究。     

大黄蒽醌衍生物在杯[8]芳烃键合固定相上色谱行为的研究

研究了药用掌叶大黄中5种蒽醌衍生物在对-叔丁基杯[8]芳烃硅胶键合固定相上的高效液相色谱行为,并与ODS固定相进行了比较。研究发现这类化合物与杯[8]芳烃固定相之间存在多种相互作用,除疏水作用外,分离过程中还存在与ODS不同的色谱分离机制。杯芳烃键合相与溶质之间的氢键作用、包容络合作用改变了杯芳烃固定相对它们的选择性。     

5,11,17,23-四叔丁基-25,26,27,28-四[3-(甲氧基羰基)苄氧基]杯[4]芳烃包合性能的研究

杯芳烃是继冠醚和环糊精后的第三代主体化合物 .这类主体分子不仅可以识别和络合阳离子 ,而且还具有包合中性有机分子的性能 [1～ 5] .杯 [4]芳烃类包合物的晶体结构测定表明 ,它们可分为分子内和分子间包合两种类型 [3 ,5] ,前者是客体分子被包合在主体分子的空穴内 ,后者是客体分子被包合在主体分子之间 .对叔丁基杯 [4]芳烃的下沿酚氧基与上沿均可进行化学修饰得到不同的杯 [4]芳烃衍生物 .最早报道的对叔丁基杯 [4]芳烃及其衍生物的分子内包合物是与甲苯或乙腈的 1∶ 1包合物 [4 ,5] ,客体分子依靠 CH3 -π的作用被包结在主体分子内[6]…     

新型杯[4]芳烃衍生物的合成及其氨基酸萃取性能

杯[4]-1,3-二乙酸乙酯衍生物(1)与水合肼反应生成杯[4]芳烃酰肼衍生物(2),化合物(2)与异硫氰酸苯酯反应得到含酰胺和硫脲单元的新型杯[4]芳烃衍生物(3).总产率达70%.系列氨基酸萃取实验表明化合物(3)对异亮氨酸有较好的选择性萃取能力.     

Preparation of novel W/O gel-emulsions and their application in the preparation of low-density materials

A series of novel and stable water in oil (W/O) gel-emulsions was created by utilizing a new cholesteryl derivative, a low-molecular mass gelator (LMMGs), as a stabilizer. In the emulsions, n-heptane, n-octane, n-nonane, n-decane, tertiary butyl methacrylate (t-BMA), methyl methacrylate (MMA), or styrene can be used as a continuous phase, water as a dispersed phase, and the stabilizer in the continuous phase is only 2% (w/v). Importantly, the gel-emulsions could be prepared by simple agitation of the mixtures at room temperature, while heating, cooling, and addition of a cosolvent or other additional component are unnecessary. SEM and optical microscopy studies revealed the foam-like structures of the gel-emulsions. Rheological measurements demonstrated that the gel-emulsions are mechanically stable and exhibit typical viscoelastic properties. Surprisingly, the storage modulus, G', and the yield stress of the gel-emulsions with the alkanes as continuous phase decrease along with increasing the volume ratio of the dispersed phase, water, a property different from those of conventional gel-emulsions reported in the literature. From the viewpoint of application, the gel-emulsions as prepared are superior to others due to their simplicity in preparation, less amount of stabilizer needed, and the nonionic nature of the stabilizer, which must benefit practical applications. Furthermore, porous polymer monoliths could be prepared by polymerizing gel-emulsions with organic monomers as a continuous phase.     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

Anion tuning and polymer templating in a simple low molecular weight organogelator

A simple triethoxysilane appended bis(urea) low molecular weight gelator (LMWG) affords strong gels in organic solvents that are susceptible to fine tuning by anion binding, while the gel structure can be rigidified into a porous hybrid polymer material by hydrolysis of the triethoxysilane end groups.     

Transforming Porous Organic Cages into Porous Ionic Liquids via a Supramolecular Complexation Strategy

Porous liquids are a type of porous materials that engineer permanent porosity into unique flowing liquids, exhibiting promising functionalities for a variety of applications. Here a Type I porous liquid is synthesized by transforming porous organic cages into porous ionic liquids via a supramolecular complexation strategy. Simple physical mixing of 18‐crown‐6 with task‐specific anionic porous organic cages affords a porous ionic liquid with anionic porous organic cages as the anionic parts and 18‐crown‐6/potassium ion complexes as the cationic parts. In contrast, mixing of 15‐crown‐5 and anionic porous organic cages in a 2:1 ratio gives only solids, while the addition of excess 15‐crown‐5 affords a Type II porous liquid. The permanent porosity in the cage‐based porous liquids has been also confirmed by molecular simulation, positron (e⁺) annihilation lifetime spectroscopy, and enhanced gas sorption capacity compared with pure crown ethers.     

A route to heat resistant solid membranes with performances of liquid electrolytes

The confinement of ionic liquids within a porous silica matrix was performed by a one-step non-hydrolytic sol-gel route, leading to hybrid materials (called "ionogels") featuring both the mechanical and transparency properties of silica gels and the high ionic conductivity and thermal stability of ionic liquids.     

N-羧基吡啶功能化离子液体的表征

合成了系列新型N-羧基吡啶功能化离子液体, 利用1H NMR、13C NMR、IR、DSC对其进行表征并研究了其与常规溶剂的相溶性, 采用酸碱滴定法测量了系列离子液体的酸离解常数pKa值. N-羧基取代吡啶功能化离子液体的pKa值在2.5~4.0之间, 并随阳离子取代羧基碳链的增长而增大; 离子之间形成氢键及阴、阳离子的大小是影响离子液体熔点的主要因素. 阴离子越小, 熔点越高. 所合成的N-羧基吡啶功能化离子液体具有相同的相溶性且由取代羧基所决定, 与常见烷基咪唑离子液体相比, N-羧基吡啶功能化离子液体与丙酮、二氯甲烷并不相溶. 功能化离子液体的阳离子取代基是影响其物化性能的主要因素, 通过改变功能化基团碳链的长短及与不同阴离子进行组合, 可以对功能化离子液体物理、化学性能进行调节.     

Fabrication of highly ordered porous membranes of cellulose triacetate on ice substrates using breath figure method

Highly ordered porous membranes of cellulose triacetate (CTA) were prepared successfully on ice substrates using breath figure method. The pore size and structure of the membrane were modulated by changing CTA concentrations and substrate materials. As the CTA concentration in the casting solution increased, the pore size in the formed membrane decreased. The regularity of the membrane cast on the ice substrate was much better than that of the membrane cast on glass substrate, because the low temperature of ice substrate slowed down the evaporation rate of organic solvent, which offered enough time for condensed water droplets to self‐organize into an ordered array dispersed in the polymer solution before their coagulation. The ordered porous CTA membrane was not only used for microfiltration, but also used for fabrication of functional microstructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 552–558     

离子液体固定化材料在固相萃取中的应用研究进展

离子液体是由阴、阳离子组成的低温熔融盐,几乎没有蒸汽压,具有稳定性好、溶解能力强、结构可设计、导电性好等优良性能.离子液体作为一种广受关注的新型“绿色溶剂”,具有代替传统有机溶剂的潜力,其制备方法和应用范围研究日趋完善和多样,已广泛应用于催化化学、光电化学、材料化学和分析化学等领域.离子液体通过功能化导向设计后,可以将...     

Surfactant ionic liquid-based microemulsions for polymerization

Surfactants based on imidazolium ionic liquids (ILs), including polymerizable surfactant ILs, have been synthesized and used to stabilize polymerizable microemulsions useful for producing polymer nanoparticles, gels, and open-cell porous materials.     

Light-Triggered Transformation of Molecular Baskets into Organic Nanoparticles

Discovering novel and functional photoresponsive materials is of interest for improving controlled release of molecules and scavenging toxic compounds for cleaning our environment or designing chemosensors. In this study, we report on the photoinduced decarboxylation of basket 1 ⁶⁻, containing three glutamic acids at its rim. This concave compound is, in an aqueous environment (30 mm phosphate buffer at pH 7.0), monomeric (¹H NMR DOSY, DLS) with glutamic acid residues randomly oriented about its rim (¹H NMR and MM-OPLS3). The irradiation (300 nm) of 1 ⁶⁻ leads to the exclusive removal of its α-carboxylates to give amphiphilic 2 ³⁻ possessing γ-carboxylates. The photochemical transformation is a consecutive reaction with mono- and bis-decarboxylated products observed with ¹H NMR spectroscopy and ESI mass spectrometry. Amphiphilic 2 ³⁻ is a preorganized molecule (MM-OPLS3) that, in water, aggregates into organic nanoparticles (ca. 50–200 nm in diameter; DLS, TEM and cryo-TEM) having a critical aggregation concentration of 12 μm (UV/Vis). As the transition of monomeric 1 ⁶⁻ into nanoparticulate 2 ³⁻ is triggered with light, we reasoned that stimuli-responsive formation of the soft material lends itself to nanotechnology applications such as controlled release or scavenging of targeted compounds.