用于超级电容器电极材料的石墨烯基纳米复合物的种类和研究现状

超级电容器是目前研究较多的新型储能元件,其大的比电容、高的循环稳定性以及快速的充放电过程等优良特性,使其在电能储存及转化方面得到广泛应用。超级电容器的电极材料是它的技术核心。石墨烯作为一种新型的纳米材料,具有良好的导电性和较大的比表面积,可作为超级电容器的电极材料。利用其他导电物质对石墨烯进行改性和复合,可以在保持其本身独特优点的同时提高作为电极材料的导电率、循环稳定性等其他性能。本文从半导体/石墨烯复合材料、金属及金属氧化物/石墨烯复合材料、石墨烯/导电聚合物复合材料3个方面综述了复合改性后的石墨烯在超级电容器电极材料方面的研究进展。通过对各复合物电极材料的制备方法和性能的对比分析,指出石墨烯基复合物作为超级电容器的电极材料的未来研究内容是开发低成本、高比容量和高循环稳定性的复合物。     

超级电容器炭电极材料的研究

炭电极材料是超级电容器的核心,该领域的研究近年来相当活跃,活性炭粉、活性炭纤维、碳凝胶、碳纳米管、玻态炭、模板炭、碳化物衍生炭、石墨烯等各种多孔炭材料用作超级电容器电极材料的研究都有报道.本文概述了我们近年来在超级电容器炭电极材料方面的研究工作,主要介绍了强碱化学活化制备活性炭电极材料、纳米CaCO3模板法制备介孔炭电...     

静电纺丝纳米纤维基超级电容器电极材料的研究进展

静电纺丝纳米纤维具有比表面积大、孔隙率高及密度低等优势,是电化学储能材料的理想候选者之一.本文综述了近年来静电纺丝碳纳米纤维、金属氧化物/硫化物/氮化物、导电聚合物及其复合材料在超级电容器领域的研究及应用进展,探讨了材料组成、结构与电化学电容性能之间的关系,并对静电纺丝纳米纤维基电极材料的发展前景进行了展望.这将为新型高性能超级电容器电极材料的结构设计与可控制备提供新思路.     

超级电容器石墨烯-聚苯胺复合材料的研究进展

超级电容器具有功率密度高、充放电速度快、循环寿命长和维护成本低的特点,在电动车动力电池领域具有潜在的应用前景。超级电容器性能主要由其电极材料所决定。聚苯胺易合成、理论比容量高,而且导电性能优异,作为超级电容器电极材料有很高的应用价值。但是,在长期使用过程中,它的体积容易发生膨胀或收缩,循环寿命差。为了解决这个问题,将聚苯胺与石墨烯复合可以扬长避短,充分利用两者之间的协同效应,赋予复合材料优异电化学电容性能。本文综述了超级电容器用石墨烯-聚苯胺复合材料的制备方法,包括原位聚合法、油水界面合成法、电化学合成法、层层自组装法等;提出了三维网状石墨烯和对石墨烯-聚苯胺复合材料进行改性来提高复合材料的电化学电容性能的思路。     

超级电容器用石墨烯-聚苯胺复合材料的研究进展

超级电容器具有功率密度高、充放电速度快、循环寿命长和维护成本低的特点,在电动车动力电池领域具有潜在的应用前景。超级电容器性能主要由其电极材料所决定。聚苯胺易合成、理论比容量高,而且导电性能优异,作为超级电容器电极材料有很高的应用价值。但是,在长期使用过程中,它的体积容易发生膨胀或收缩,循环寿命差。为了解决这个问题,将聚苯胺与石墨烯复合可以扬长避短,充分利用两者之间的协同效应,赋予复合材料优异电化学电容性能。本文综述了超级电容器用石墨烯-聚苯胺复合材料的制备方法,包括原位聚合法、油水界面合成法、电化学合成法、层层自组装法等;提出了三维网状石墨烯和对石墨烯-聚苯胺复合材料进行改性来提高复合材料的电化学电容性能的思路。     

超级电容器用石墨烯/金属氧化物复合材料

超级电容器是一种具有高功率密度和长循环寿命的新型储能装置,碳材料、金属氧化物和导电聚合物是常见的三种超级电容器电极材料。在石墨烯/金属氧化物复合材料中,石墨烯和金属氧化物可以发挥各自的优点,结合石墨烯优异的循环稳定性能和金属氧化物的高容量特性,纳米复合材料的综合性能可以得到很大地提升。因此,石墨烯/金属氧化物复合物的研究是超级电容器领域的热点研究方向之一。本文以金属氧化物的种类、石墨烯的结构和复合物的制备方法为线索,综述了国内外应用于超级电容器方面的石墨烯/金属氧化物复合材料的研究进展,归纳总结出与石墨烯复合最优的金属氧化物类型和制备方法,并进一步对该类复合材料的发展趋势进行了展望。     

炭-/石墨烯量子点在超级电容器中的应用

炭-/石墨烯量子点作为新兴的炭纳米材料,因具有独特的小尺寸效应和丰富的边缘活性位点而在高性能超级电容器电极材料的研发方面展现出巨大潜力。针对目前炭-/石墨烯量子点在超级电容器电极材料方面的应用优势和存在的关键问题,本文以炭-/石墨烯量子点、量子点/导电炭复合材料、量子点/金属氧化物复合材料、量子点/导电聚合物复合材料以及量子点衍生炭这些电极材料为脉络,梳理了近年来该领域的发展状况,尝试阐释炭-/石墨烯量子点在电极材料、复合材料和衍生炭电极材料中所起到的关键作用,最后对炭-/石墨烯量子点电极材料的发展进行了展望。本综述以期为炭-/石墨烯量子点基电极材料的研究提供一定参考和依据。     

石墨烯/聚苯胺复合材料在超级电容器中的研究进展

聚苯胺理论比容量高,具有优良的导电性能,是理想的超级电容器电极材料。但是,在长期的充放电过程中容易发生体积的收缩与膨胀,循环寿命差。同时,石墨烯由于具有高的理论比表面积,被广泛用作超级电容器电极材料。将聚苯胺与石墨烯复合,利用二者的协同作用,使复合材料具有优异的电化学性能。本文综述了石墨烯/聚苯胺复合材料的制备方法以及近年来在超级电容器领域的主要研究成果,并就其目前存在的主要问题进行了讨论,最后对石墨烯/聚苯胺复合材料的前景进行了展望。     

石墨烯基平面微型超级电容器的研究进展

便携式电子器件的快速发展极大地刺激了现代社会对多功能化、小型化的电化学储能器件的强烈需求.其中,微型超级电容器正逐渐成为芯片储能器件研究领域中一个新兴的、前沿的研究方向.它可作为微型功率源与微电子器件互相兼容,具有极大的应用前景.最近,以石墨烯为代表的二维材料为设计和发展新型平面化微型超级电容器提供了许多关键参数,引起了大家的关注.鉴于此,本文综述了石墨烯基平面微型超级电容器的最新进展,包括其发展历史、典型的石墨烯材料(如石墨烯、石墨烯量子点、活化石墨烯、石墨烯/碳纳米管、石墨烯/金属氧化物、石墨烯/聚合物)的制备、微型电极的构筑与加工(如光刻、电化学沉积、激光刻绘、喷涂印刷等)、电解液(如水系、有机系、离子液体和固态式)、微型器件构型组装(对称的、非对称的)和微型器件的评测方法.最后,展望了石墨烯基微型超级电容器未来的发展趋势和面临的挑战.     

二维纳米片层孔洞化策略及组装材料在超级电容器中的应用

功率密度高、倍率性能优异和循环性能好等特性使得超级电容器在储能领域显示了巨大的应用前景。尽管二维层状材料剥离形成的纳米片层不仅可为电化学反应提供独特的纳米级反应空间,而且由其组装的层状纳米电极材料具有化学和结构上的氧化还原可逆性及纳米片层水平方向上离子或电子快速传输通道。但是,纳米片层组装电极材料在纳米片层垂直方向上离子或电子传输存在障碍,对于超级电容器功率密度和能量密度的提高及实现快速能量储存非常不利。因此,如何通过改善离子或电子的快速传输,实现超级电容器大功率密度下的高能量密度是超级电容器电极材料发展的方向之一。本文主要综述了二维层状材料剥离成纳米片层,纳米片层孔洞化策略及组装孔洞化材料在超级电容器电极材料中的应用。纳米层孔洞化技术是改善层状电极材料在纳米片层垂直方向离子或电子传输的有效手段,为实现高比电容下的高倍率性能超级电容器电极材料制备提供了方法学。最后,对开发大功率密度下的高能量密度超级电容器电极材料提出了展望。     

Electrochemical Preparation of Polypyrrole/Graphene Films on Titanium Mesh as Active Materials for Supercapacitors

Films of polypyrrole/graphene on titanium mesh were prepared by electrochemical reduction of the fresh dried foam films of graphene oxide followed by an electrochemical polymerization of pyrrole. The as-obtained composite had highly surface area, conductivity, and could be used as the electrode for supercapacitors, especially directly used as the active materials in free of binders while the Ti mesh worked as the collector. Plenty of polypyrrole nanoparticles formed on the surface of reduced graphene film, and some fiber-like aggregates could be formed during the polymerization, which worked as the material for pseudo-capacitance. The specific capacitance of the supercapacitor reached 400 F/g and showed high stability with retaining capacitance of 82% after 5000 cycles, indicating that the nanocomposite is a suitable active material for supercapacitors.     

超级电容器用石墨烯薄膜：制备、基元结构及表面调控

石墨烯薄膜是一种以石墨烯纳米片为基元结构的宏观体,通过合理的结构设计和表面修饰使其具有优异的电学、力学和热学性能,将在电化学储能、电子器件、健康和环保等领域具有潜在的应用。本文主要综述了从石墨烯基元调控到二维宏观膜组装以及石墨烯薄膜在超级电容器应用中的研究进展。主要介绍了石墨烯薄膜的简易制备方法,并详细介绍了通过对石墨烯基元的结构调控和表面修饰来优化石墨烯薄膜电化学性能的两大策略,最后对石墨烯薄膜应用所面临的挑战和未来的发展进行了总结与展望。     

A Molecular Pillar Approach To Grow Vertical Covalent Organic Framework Nanosheets on Graphene: Hybrid Materials for Energy Storage

Hybrid 2D–2D materials composed of perpendicularly oriented covalent organic frameworks (COFs) and graphene were prepared and tested for energy storage applications. Diboronic acid molecules covalently attached to graphene oxide (GO) were used as nucleation sites for directing vertical growth of COF‐1 nanosheets (v‐COF‐GO). The hybrid material has a forest of COF‐1 nanosheets with a thickness of 3 to 15 nm in edge‐on orientation relative to GO. The reaction performed without molecular pillars resulted in uncontrollable growth of thick COF‐1 platelets parallel to the surface of GO. The v‐COF‐GO was converted into a conductive carbon material preserving the nanostructure of precursor with ultrathin porous carbon nanosheets grafted to graphene in edge‐on orientation. It was demonstrated as a high‐performance electrode material for supercapacitors. The molecular pillar approach can be used for preparation of many other 2D‐2D materials with control of their relative orientation.     

A review of transition metal chalcogenide/graphene nanocomposites for energy storage and conversion

Recent advances in the applications of transition metal chalcogenides/graphene (TMC/graphene) nanocomposites in future energy storage and conversion are reviewed. The synthesis processes and structures of TMC/graphene, workingpriciple of evergy energy device, and the electrochemical performances are summarized.     

Plasma enhanced synthesis of N doped vertically aligned carbon nanofibers on 3D graphene

Graphene and carbon nanotubes/fibers (CNT/CNF) hybrid structures are emerging as frontier materials for high-efficiency electronics, energy storage, thermoelectric, and sensing applications owing to the utilization of extraordinary electrical and physical properties of both nanocarbon materials. Recent advances show a successful improvement in the structure and surface area of layered graphene by incorporating another dimension and structural form—three-dimensional graphene (3DG). In this study, vertically aligned CNFs were grown using plasma enhanced chemical vapor deposition on a relatively new form of compressed 3DG. The latter was synthesized using a conventional thermal chemical vapor deposition. The resulting free-standing hybrid material is in-situ N doped during synthesis by ammonia plasma and is produced in the form of a hybrid paper. Characterization of this material was done using electrochemical and spectroscopic measurements. The N doped hybrid showed relatively higher surface area and improved areal current density in electrochemical measurements than compressed pristine 3DG, which makes it a potential candidate for use as an electrode material for supercapacitors, sensors, and electrochemical batteries.     

Graphene/activated carbon supercapacitors with sulfonated-polyetheretherketone as solid-state electrolyte and multifunctional binder

Sulfonated polyetheretherketone (SPEEK) has been synthesised by sulphonation process and used as the solid-state electrolyte, binder and surfactant for supercapacitors. Reduced graphene dispersed by SPEEK is used as a high-efficiency conducting additive in solid-state supercapacitors. It is found that SPEEK can improve the stability of the reduced graphene dispersion significantly, and therefore, the solid-state supercapacitors show a large decrease in IR drop and charge-transfer resistance (R_ct), resulting in a higher rate capability. The solid-state supercapacitors with the activated carbon/reduced graphene/SPEEK/electrode can be operated from 1 to 8 A/g and exhibit capacity retention of 93%. The noteworthy is more than twice higher value for capacity retention by comparison with the solid-state supercapacitors using activated carbon/reduced graphene/PVDF electrode (capacity retention is 36%). The cell of reduced graphene with SPEEK can be cycled over 5000 times at 5 A/g with no capacitance fading.     

新碳源制备活性炭和石墨烯及其非等电极电容水系超级电容器

Carbon materials can offer various micro- and nanostructures as well as bulk and surface functionalities; hence, they remain the most popular for manufacturing supercapacitors. This article critically reviews recent developments in the preparation of carbon materials from new precursors for supercapacitors. Typical examples are activated carbon (AC) and graphene, which can be prepared from various conventional and new precursors such as biomass, polymers, graphite oxide, CH₄, and even CO₂ via innovative processes to achieve low-cost and/or high specific capacitance. Specifically, when producing AC from natural biomasses or synthetic polymers, either new, spent, or waste, popular activation agents, such as KOH and ZnCl₂, are often used to process the ACs derived from these new precursors while the respective activation mechanisms always attract interest. The traditional two-step calcination process at high temperatures is widely employed to achieve high performance, with or without retaining the morphology of the precursors. The three-step calcination, including a post-vacuum treatment, is also the preferred choice in many cases, but it can increase the cost per capacity (kWh∙g⁻¹). More recently, one-step molecular activation promises a better and more economical approach to the commercial application of AC, although further increase of the yield is necessary. In addition to activation, graphitization, N doping, and template control can further improve ACs in terms of the charging and discharging rates, or pseudocapacitance, or both. Considerations are also given to material structure design, and carbon regeneration during activation. Metal-organic frameworks, which were initially used as templates, have been found to be good direct carbon precursors. Various graphene structures, including powders, films, aerogels, foams, and fibers, can be produced from graphite oxide, CO₂, and CH₄. Similar to AC, graphene can possess micropores by activation. Self-propagating high-temperature synthesis and molten salt processing are newly-reported methods for fabrication of mesoporous graphene. Macroporous graphene hydrogels can be produced by hydrothermal treatment of graphite oxide suspension, which can also be transferred into films. Hierarchically porous structures can be achieved by H₂O₂ etching or ZnCl₂ activation of the macroporous graphene precursor. Sponges as templates combined with KOH activation are applied to create both micro- and macropores in graphene foams. Graphene can grow on fibers and textiles by electrodeposition, dip-coating, or filtration, which can be woven into clothes with a large area or thick loading, illuminating the potential application in flexible and wearable supercapacitors. The key obstacles in AC and graphene production are high cost, low yield, low packing density, and low working potential range. Most Carbon materials derived from new precursors work very well with aqueous electrolytes. Charge storage occurs not only in the electric double layer (i.e., the "carbon | electrolyte" interface), but also via redox activity in association with the bulk and surface functionalities, and the resulting partial delocalization of valence electrons. The analysis of the capacitive electrode has shown a design defect that prevents the working voltage of a symmetrical supercapacitor from reaching the full potential window of the carbon material. This defect can be avoided in AC-based supercapacitors with unequal electrode capacitances, leading to higher cell voltages and hence higher specific energy than their symmetrical counterparts. There are also emerging ways to raise the energy capacity of AC supercapacitors, such as the use of redox electrolytes to enable the Nernstian charge storage mechanism, and of the three dimensional printing method for a desirable electrode structure. All these developments are promising carbon materials from various precursors of new and waste sources for a more affordable and sustainable supercapacitor technology.     

Nanoarchitectured Graphene‐Based Supercapacitors for Next‐Generation Energy‐Storage Applications

Tremendous development in the field of portable electronics and hybrid electric vehicles has led to urgent and increasing demand in the field of high‐energy storage devices. In recent years, many research efforts have been made for the development of more efficient energy‐storage devices such as supercapacitors, batteries, and fuel cells. In particular, supercapacitors have great potential to meet the demands of both high energy density and power density in many advanced technologies. For the last half decade, graphene has attracted intense research interest for electrical double‐layer capacitor (EDLC) applications. The unique electronic, thermal, mechanical, and chemical characteristics of graphene, along with the intrinsic benefits of a carbon material, make it a promising candidate for supercapacitor applications. This Review focuses on recent research developments in graphene‐based supercapacitors, including doped graphene, activated graphene, graphene/metal oxide composites, graphene/polymer composites, and graphene‐based asymmetric supercapacitors. The challenges and prospects of graphene‐based supercapacitors are also discussed.     

Facile synthesis of nanoporous CuS nanospheres for high-performance supercapacitor electrodes

In recent years, development of high-performance supercapacitor electrode materials has stimulated a great deal of scientific research. The electrochemical performance of a supercapacitor strongly depends on its material structures. Herein, we report a simple strategy for high-performance supercapacitors by building pseudocapacitive CuS nanospheres with nanoporous structures, nanosized walls(10 nm) and relatively large specific surface area of 65 m~2/g. This electrode demonstrates excellent electrochemical performance including a maximum specific capacitance of 814 F/g at 1 A/g, significant rate capability of 42% capacitance retention at an ultrafast rate of 50 A/g, and outstanding long-term cycling stability at various current densities. The remarkable electrochemical performance of as-prepared nanoporous CuS nanospheres electrode has been attributed to its unique structures that plays a key role in providing short ion and electron diffusion pathways, facilitated ion transport and more active sites for electrochemical reactions. This work sheds a new light on the metal sulfides design philosophy, and demonstrates that nanoporous CuS nanospheres electrode is a promising candidate for application in high-performance supercapacitors.     

激光诱导三维网状石墨烯的一步法制备及应用

三维多孔石墨烯作为一种优异的石墨烯碳材料, 其独特的多孔结构使得材料在具有较大比表面积的同时还保持着足够高的电子迁移率和机械稳定性, 在电子器件中得到了广泛的应用. 本文介绍的激光诱导石墨烯是一种以一步法直接制备得到的三维网状石墨烯材料, 该技术将三维石墨烯的制备和图案化相结合, 无需进行湿化学反应处理, 制作方法更简便, 材料性能更优异. 目前研究主要集中在通过掺杂提高性能和利用转移法实现不同基底器件的制备. 激光诱导石墨烯自身特有的属性如多孔微纳米结构和大的比表面积等使其在超级电容器和传感器等领域拥有较高的应用价值.