荧光法直接测定环境中邻羟基苯甲酸和苯酚混合物的含量

本文研究了用荧光分光度法测定环境水中苯酚和邻羟基苯甲酸的含量碘在ＰＨ〉１１时直接测定邻羟基苯甲酸的含量,波长为λｅｘ／λｅｍ＝２８９／３３８ｎｍ,检出 为３．４ｎｇ／ｍＬ,线性范围０－６．０μｇ／ｍＬ。在ＰＨ＝６,波长为λｅｘ／λｅｍ＝２７０／２９７ｎｍ测得苯酚含量,检出限为４．０ｎｇ／ｍＬ,线性范围在０－０．８５μｇ／ｍＬ,回收率为９８－１０１％,,结果满意。     

5′-硝基-水杨基荧光酮-溴化十六烷基 三甲胺荧光猝灭法测定微量锆

本文基于Ｚｒ（Ⅳ）－５′－硝基－水杨基荧光酮（５′－Ｎ－ＳＡＦ）－溴化十六烷基三甲铵（ＣＴＭＡＢ）体系的荧光猝灭效应,提出一种测定微量锆的新荧光分析方法。在０．８～１．２ｍｏｌ／Ｌ的Ｈ２ＳＯ４介质中,在ＣＴＭＡＢ存在下,锆与５－Ｎ－ＳＡＦ生成组成比为１∶４的橙红色络合物。该体系存在两个激发峰,其激发波长分别为λｅｘ１＝４７５ｎｍ,λｅｘ２＝５０５ｎｍ,发射波长λｅｍ＝５２５ｎｍ。锆（Ⅳ）浓度在２．０～８０μｇ／Ｌ呈良好线性关系,检出限为２．０μｇ／Ｌ。本法灵敏度高,选择性好,用于铝合金中微量锆的测定,获得满意结果。     

水杨醛水杨酰腙荧光分光光度法测定铍的研究

研究了水杨醛不杨酰腙与荧光反应的最佳条件,确定在ｐＨ５．２醋酸－醋酸钠缓冲溶液中形成荧光配合物λｅｘ／λｅｍ＝３７０／４５０ｎｍ,建立了新的荧光测定铍的方法。本测定方法的线性范围为０－１８０ｐｐｂ,检出国３．２ｐｐｂ,相对标准偏差为３．２９％,考察了３０余种共存组分的干扰情况,应用地于矿泉水及硫酸钡样品中痕量铍的测定,结果令人满意。     

铝－氟－DSPCF分光光度法测定地下水中铝

本文研究了铝－氟－１，５－二（２－羟基－５－磺基苯基）－３－氰基甲（ＤＳＰＣＦ）的显色反应。在硼酸－硼砂介质中，显色反应灵敏，最大吸收波长为６１０ｎｍ，配合物的表现摩尔吸光系数５．０×１０４，铝含量在０－１５μｇ／２５ｍＬ符合比尔定律。该法用于地下水中微量铝的测定获得了满意结果。     

分光光度法测定豆类及其粗蛋白质中的色氨酸

建立一种快速，准确测定豆类试样及其粗蛋白质中色氨酸含量的分光光度法，讨论最佳试验条件及试剂用量，反应产物在４１０ｎｍ处具有最大吸收波长ε＝１．１０３×１０~４Ｌ／ｍｏｌ·ｃｍ。回收率９３．５０％－１１０．０％，相对标准偏差小于２．６１％。     

溴化5-[4-(4-吡啶丁氧基)苯基]-10,15,20-三苯基卟啉对铜离子显色反应的研究

本文研究了溴化５－［４－（４－吡啶丁氧基）苯基］－１０,１５,２０－三苯基卟啉与Ｃｕ２＋的显色反应条件,络合物最大吸收波长为４１４ｎｍ,试剂（Ｈ４Ｐ２＋）最大吸收波长为４４６ｎｍ。对比度为３２ｎｍ,试剂与铜络合比为１∶１,表观摩尔吸光系数为２．５×１０５Ｌ·ｍｏｌ－１·ｃｍ－１,铜含量在０．２—１．０μｇ／１０ｍＬ内符合比耳定律,可用于痕量铜的测定。     

用硫氰铁铵-氯仿体系光度法测定尿样中的聚乙二醇-600

本文是基于在聚乙二醇－６００（ＰＥＧ－６００）存在下Ｆｅ（ＳＣＮ）３在水相和氯仿相之间进行分配，光度法定量测定尿样的ＰＥＧ－６００。ＣＨＣｌ３相的最大的吸收波长为５０５ｎｍ，振摇时间３０分，检测限为０．２５ｇ／Ｌ，线性范围０．２５～２．５ｇ／Ｌ，回收率１０７％，相对标准偏差（ＲＳＤ）小于５％。该法操作简单，方便，重复性好，可用于临床上尿样中ＰＥＧ的测定。     

Al(Ⅲ)-CAS-OP-PVA体系分光光度法测定沸石分子筛中的铝

研究了在聚乙二醇辛基苯基醚（乳化剂ＯＰ）及聚乙烯醇（ＰＶＡ）存在下铝（Ⅲ）与铬天青Ｓ（ＣＡＳ）的显色反应。在ｐＨ５．３的ＨＡｃ－ＮａＡｃ缓冲介质中，题示体系最大吸收波长λｍａｘ＝６１２ｎｍ，对比度Δλ＝１０２ｎｍ，表观摩尔吸光系数ε６１２ｎｍ＝２．８４×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。铝（Ⅲ）浓度在０－０．６０μｇ／ｍＬ范围内遵守比耳定律。本法已成功地用于沸石分子筛中铝含量的测定，结果良好。该法具有稳定性高、准确度好的特点。     

苯基荧光酮在混合表面活性剂体系中铜、铝的分光光度法同时测定

本文对在溴代十六烷基三甲铵和吐温８０混合表面活性剂中苯基荧光酮分光光度法同时测定铜和铝进行了研究。实验表明，在磷酸介质中，ｐＨ＝６．８－７．４范围内，苯基荧光酮与铜、铝形成稳定的络合物。铜络合物最大吸收波长为６００ｎｍ，εＣｕ６００＝６．６３×１０４Ｌ·ｍｏｌ－１·ｃｍ－１，线性范围为０—５μｇ／２５ｍＬ；铝络合物最大吸收波长为５６４ｎｍ，εＡｌ５６４＝１．０１×１０５Ｌ·ｍｏｌ－１·ｃｍ－１，线性范围０—６μｇ／２５ｍＬ。方法灵敏度高，选择性好，用于水及健康人体冻干血浆中铜、铝回收率的测定，结果满意。     

组织中去甲肾上腺素的荧光测定法

本文研究了去甲肾上腺素荧光光度测定方法。测定范围在１０－１００ｎｇ则与荧光值呈良好线性关系，λｅｘ／λｅｍ＝４１０ｎｍ／５０５ｎｍ，回收率为９１．６８－９６．６５％，标准偏差平均为６．１％，本法具有准确、简便、快速等特点。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.