A palladium-catalyzed three-component coupling of arylboronic acids, sulfur dioxide and hydrazines

A novel and efficient route to aryl N-aminosulfonamides via a palladium-catalyzed three-component coupling of arylboronic acids, sulfur dioxide and hydrazines in the presence of a balloon of dioxygen is reported. The reaction proceeded smoothly under mild conditions and DABCO·(SO(2))(2) was used as the source of sulfur dioxide.     

A palladium-catalyzed reaction of aryl halides, potassium metabisulfite, and hydrazines

Aryl N-aminosulfonamides could be easily produced via a palladium-catalyzed coupling of aryl halides, potassium metabisulfite, and hydrazines. Potassium metabisulfite is an excellent equivalent of sulfur dioxide in the reaction of palladium-catalyzed aminosulfonylation.     

Desulfinative palladium‐catalyzed cross‐coupling of arylsulfonyl hydrazides with aryl bromides under air

A highly efficient and mild palladium‐catalyzed cross‐coupling of arylsulfonyl hydrazides and aryl bromides for the selective synthesis of unsymmetrical biaryls has been developed. This methodology has the advantages of easily accessible starting materials, functional group tolerance and a wide range of substrates, which provide rapid access to biaryls derivatives. In this protocol, abundant and stable aryl bromides serve as the aryl sources by coupling reaction of the aryl group generated from arylsulfonyl hydrazides via in situ release of nitrogen and sulfur dioxide. No external oxidants or acids are needed for this kind of transformation.     

CO2 as Both a Selective Agent and Reaction Media in Palla-dium-Catalyzed Reductive Ullmann-Type Coupling Reaction

Carbon dioxide as both a selective agent and reaction media in the palladium-catalyzed Ullmann-type coupling has been described. The results showed that aryl chlorides could be easily activated in the presence of carbon dioxide and the chemoselectivity shifted toward the palladium-catalyzed Ullmann-type coupling reaction. In liquid carbon dioxide, homocoupling reactions of aryl halides, including less reactive aryl chlorides, were carried out smoothly in moderate to good yields using Pd/C, zinc, and H2O as the catalytic system at room temperature.     

Pd‐catalyzed Desulfitative reaction of Aryltrifluoroborates with sodium Arenesulfinates in water

An efficient procedure for the synthesis of biaryls was catalyzed by Pd(CH₃CN)₄(BF₄)₂ is reported. This Pd‐catalyzed cross‐coupling reaction of aryltrifluoroborates with sodium arenesulfinates was developed under mild and environmentally benign conditions, in water without any ligand or additive. The reaction gave a range of structurally diverse unsymmetrical bi‐aryl molecules with excellent yields, in which the byproduct was sulfur dioxide. It is worth noting that this protocol is also applicable to many heterocyclic aromatics such as thiophene, furan, pyridine, quinoline, isoquinoline and indole.     

Palladium(II)‐Catalyzed Synthesis of Sulfinates from Boronic Acids and DABSO: A Redox‐Neutral,Phosphine‐Free Transformation

A redox‐neutral palladium(II)‐catalyzed conversion of aryl, heteroaryl, and alkenyl boronic acids into sulfinate intermediates, and onwards to sulfones and sulfonamides, has been realized. A simple Pd(OAc)₂ catalyst, in combination with the sulfur dioxide surrogate 1,4‐diazabicyclo[2.2.2]octane bis(sulfur dioxide) (DABSO), is sufficient to achieve rapid and high‐yielding conversion of the boronic acids into the corresponding sulfinates. Addition of C‐ or N‐based electrophiles then allows conversion into sulfones and sulfonamides, respectively, in a one‐pot, two‐step process.     

Palladium(II)‐Catalyzed Synthesis of Sulfinates from Boronic Acids and DABSO: A Redox‐Neutral,Phosphine‐Free Transformation

A redox‐neutral palladium(II)‐catalyzed conversion of aryl, heteroaryl, and alkenyl boronic acids into sulfinate intermediates, and onwards to sulfones and sulfonamides, has been realized. A simple Pd(OAc)₂ catalyst, in combination with the sulfur dioxide surrogate 1,4‐diazabicyclo[2.2.2]octane bis(sulfur dioxide) (DABSO), is sufficient to achieve rapid and high‐yielding conversion of the boronic acids into the corresponding sulfinates. Addition of C‐ or N‐based electrophiles then allows conversion into sulfones and sulfonamides, respectively, in a one‐pot, two‐step process.     

Pd‐NHC‐Catalyzed Alkynylation of General Aryl Sulfides with Alkynyl Grignard Reagents

Cross‐coupling reactions of unactivated aryl sulfides with alkynylmagnesium chloride have been invented to afford 1‐aryl‐1‐alkynes with the aid of a palladium/N‐heterocyclic carbene complex. This reaction has by far the widest scope of all transformations utilizing aryl sulfides and alkynes, while known cross‐coupling alkynylations of aryl‐sulfur electrophiles require activated azaaryl sulfides, thiolactams, or arenesulfonyl chlorides. The alkynylation of aryl sulfides is compatible with typical protecting functional groups. The alkynylation is applied to the synthesis of benzofuran‐based fluorescent molecules by taking advantage of characteristic organosulfur chemistry.     

Rongalite-promoted synthesis of β-keto sulfones via radical cascade reaction

Direct arylsulfonylation of arylethenes with aryl iodides and sodium metabisulfite to access β-keto sulfones is described. In this reaction, rongalite (sodium hydroxymethanesulfinate) and sodium metabisulfite serve as the radical promoter and the sulfur dioxide surrogate, respectively.     

Cationic polymerization of styrene involving ionization of the C?Cl bond in ionic liquid/SO2 mixture

There has been a recent upsurge in interest in use of ionic liquids as reaction media for various chemical processes. Until recently, ionic liquids were considered as highly polar solvents. Our earlier investigation indicated that cationic polymerization of styrene initiated by aryl (alkyl) chlorides in ionic liquids may proceed even in the absence of coinitiator (Lewis acid). Polymerization, however, did not conform to controlled polymerization scheme. More recently, it has been claimed that ionic liquids are not as polar as it was previously assumed. Independently, high solubility of sulfur dioxide in ionic liquids was noticed. As sulfur dioxide displays a high ionizing power toward organic halides, we applied ionic liquid/sulfur dioxide mixture as a solvent in cationic polymerization of styrene initiated by aryl (alkyl) chlorides. Results show that in this reaction medium ionization of the C? Cl bond is facilitated, and the contribution of chain transfer reaction can be reduced as compared with polymerization in ionic liquid alone. Ionization of the C? Cl bond, however, is still not sufficiently fast to ensure conditions of controlled polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5251–5257, 2009     

CuI-catalyzed direct synthesis of diaryl thioethers from aryl boronic acids and arylsulfonyl chlorides

A CuI-catalyzed direct coupling of aryl boronic acids with arylsulfonyl chlorides for the preparation of diaryl thioethers was developed. The reaction is initiated by a PPh₃ reduction of the arylsulfonyl chloride, followed by a CuI-catalyzed C–S coupling with an aryl boronic acid. Various arylsulfonyl chlorides can directly serve as a sulfur source in this mild and efficient reaction giving the desired products in moderate to good yields. Moreover, this practical method has also been applied to the thioetherification of aryl iodides and acetylacetones.     

Facile one-pot synthesis of aromatic and heteroaromatic sulfonamides

A series of arene and heteroarene sulfonamides were prepared in one vessel from aryl and heteroaryl bromides via conversion into the corresponding Grignard reagents using either magnesium or isopropylmagnesium chloride and subsequent reaction with sulfur dioxide, sulfuryl chloride, and an amine.     

Convenient method for preparation of aryl sulfinates from arenes and DABSO as the SO2 surrogates

A safe and efficient protocol for the synthesis of aryl sulfinates from arenes and 1,4-diazabicyclo[2,2,2]octane bis(sulfur dioxide) (DABSO) under mild conditions is described. Through in situ infrared spectroscopic studies, a plausible mechanism for the sulfination reaction is proposed as well.     

Nickel‐Catalyzed Thiolation of Aryl Halides and Heteroaryl Halides through Electrochemistry

Transition‐metal‐catalyzed coupling reactions are useful tools for synthesizing aryl sulfur compounds. However, conventional transition‐metal‐catalyzed thiolation of aryl bromides and chlorides typically requires the use of strong base under elevated reaction temperature. Herein, we report the first examples of nickel‐catalyzed electrochemical thiolation of aryl bromides and chlorides in the absence of an external base at room temperature using undivided electrochemical cells.     

A novel dual-nano assisted synthesis of symmetrical disulfides from aryl/alkyl halides

Here, we have reported a novel approach towards dual-nano assisted synthesis of disulfides from coupling of alkyl/aryl halides and sulfur nanoparticles. The indium oxide nanoparticles as catalyst expedite the conversion and sulfur nanoparticle notably enhances the miscibility, providing a faster, high yielding and cost-effective process in ethanol-water system. The method has synthetic advantages in terms of mild reaction framework, catalyst regeneration, and absence of any sulfide or polysulfide linkage as by-product leading to a column free synthesis. A variety of alkyl, aryl and heteroaryl symmetrical disulfides are obtained in good to excellent yields up to exceeding 98%.     

New role of CO2 as a selective agent in palladium-catalyzed reductive Ullmann coupling with zinc in water

Carbon dioxide was found to promote the palladium-catalyzed zinc-mediated reductive Ullmann coupling of aryl halides. In the presence of carbon dioxide, Pd/C, and zinc, various aromatic halides including less reactive aromatic chlorides were coupled to give the corresponding homocoupling products in good yields.     

Palladium‐Catalyzed Synthesis of Ammonium Sulfinates from Aryl Halides and a Sulfur Dioxide Surrogate: A Gas‐ and Reductant‐Free Process

Sulfonyl‐derived functional groups populate a broad range of useful molecules and materials, and despite a variety of preparative methods being available, processes which introduce the most basic sulfonyl building block, sulfur dioxide, using catalytic methods, are rare. Described herein is a simple reaction system consisting of the sulfur dioxide surrogate DABSO, triethylamine, and a palladium(0) catalyst for effective convertion of a broad range of aryl and heteroaryl halides into the corresponding ammonium sulfinates. Key features of this gas‐ and reductant‐free reaction include the low loadings of palladium (1 mol %) and ligand (1.5 mol %) which can be employed, and the use of isopropyl alcohol as both a solvent and formal reductant. The ammonium sulfinate products are converted in situ into a variety of sulfonyl‐containing functional groups, including sulfones, sulfonyl chlorides, and sulfonamides.     

Assembly of 3-sulfonated 2H-pyrrol-2-ones through the insertion of sulfur dioxide with allenoic amides

Generation of 3-sulfonated 2H-pyrrol-2-ones through a three-component reaction of allenoic amides, sulfur dioxide, and aryldiazonium tetrafluoroborates under metal-free conditions is achieved. This transformation proceeds under mild conditions without the addition of catalysts or additives, giving rise to 3-sulfonated 2H-pyrrol-2-ones in moderate to good yields. Good functional group compatibility is observed. A plausible mechanism is proposed, which is initiated by aryl radicals formed in situ from aryldiazonium tetrafluoroborates and DABCO·(SO₂)₂. Additionally, excellent chemoselectivity and regioselectivity are presented in this transformation.     

A facile approach to asymmetrical biaryls via coupling reaction of aryl halides with sodium tetraphenylborate catalyzed by MCM-41-supported sulfur palladium（0） complex

Various functionalized asymmetrical biaryls can be synthesized in high to excellent yields via coupling reaction of aryl iodides or bromides with NaBPh4 catalyzed by MCM-41-supported sulfur palladium(0)complex.This palladium complex can be easily recovered and reused many times without loss of activity.     

Base‐Promoted Coupling of Carbon Dioxide,Amines, and Diaryliodonium Salts: A Phosgene‐ and Metal‐Free Route to O‐Aryl Carbamates

A phosgene‐ and metal‐free synthesis of O‐aryl carbamates is realized through a three‐component coupling of carbon dioxide, amines and diaryliodonium salts. The reaction only requires a base as the promoter, providing access to a diverse array of O‐aryl carbamates in moderate to high yields with excellent chemoselectivity.