Open tubular capillary electrochromatography of underivatized amino acids using Rh(III) tetrakis(phenoxyphenyl)porphyrinate as wall modifier

The separation of 17 “common” underivatized amino acids was attempted by open tubular capillary electrochromatography (OT-CEC) in fused-silica capillaries coated with Rh(III) tetrakis(phenoxyphenyl)porphyrinate (Rh(III)TPP(m-OPh)₄OAc) using sodium phosphate and Tris–phosphate buffers as background electrolytes (BGEs). The OT-CEC separation of amino acids was compared with that obtained by capillary zone electrophoresis in bare fused-silica capillaries using the same BGEs. The amino acids were not derivatized and the UV-absorption detection was set at 200 nm. Depending on the experimental conditions at least 15 amino acids were separated. The best separations were obtained in a Rh(III)TPP(m-OPh)₄OAc-coated capillary in 50 mM Tris–100 mM phosphate buffer at pH 2.25. Separation of the critical triplet Val–Ile–Leu was always at least indicated being better at higher BGE concentrations. Regarding the sensitivity of the method, lower concentration limits of detection (LODs) in the coated capillary were obtained for Thr, Gly, Tyr, and Val; the other amino acids exhibited lower LODs in the uncoated capillary. The separation of acidic amino acids was not achieved.     

Behavior of new complexes of tetrakis(4-methoxylphenyl)porphyrin with heavy rare earth elements in reversed-phase high performance liquid chromatography

An HPLC method has been developed for the separation of new complexes of tetrakis(4-methoxylphenyl)porphyrin (TMOPP) with four heavy rare earth elements (RE = Y, Er, Tm, and Yb). The function of amine and acid in the mobile phase has been investigated and a reasonable explanation is presented. Successful separation of the RE-TMOPP-Cl complexes is accomplished in 10 min with a mobile phase consisting of methanol-water-acetic acid-triethanolamine. The detection limits (S/N= 3) for the four complexes are 0.01 microg/mL. This method is rapid, sensitive, and simple.     

MnTFPPCl模拟体系催化环己烯氧化反应性能研究

研究了高氟代金属卟啉ＭｎＴＦＰＰＣｌ催化环己烯氧化反应的催化活性,探索了反应体系中不同单氧原子给体对催化反应的影响。结果表明,ＭｎＴＦＰＰ－Ｃｌ／ＮａＯＣｌ体系有较好的催化转移氧能力。主要以ＰｈＩＯ为氧化剂,考察了轴向配体,溶剂等对ＭｎＴＦＰＰＣｌ／ＰｈＩＯ模拟体系的影响。     

High-performance thin-layer chromatography of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin on cellulose and silica gel

Summary The migration behavior of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin (TTP) are studied in HPTLC systems with cellulose and silica gel thin-layers and various organic solvents of relatively low polarity. The mobility of the metal complex tends to increase in the following orders of its central-metal elements: on cellulose, Mg(II)<Zn(II)<V(IV)<(H)<Pd(II)< Ni(II)Cu(II); on silica gel, Mg(II)<V(IV)<Zn(II)= (H)<Ni(II)Pd(II)Cu(II). Recommendable phase system for the separation of metal-TTP complexes is a combination of silica gel thin-layer with a carbon disulfide-m-xylene mixture though the complexes of Ni, Cu and Pd are not completely resolved.     

Poly(norbornene)s as matrix materials for platinum tetrakis(pentafluorophenyl)porphyrin based optical oxygen sensors

A set of poly(norbornenes) was prepared using ring opening metathesis polymerization (ROMP) and used as matrix material for the preparation of optical oxygen sensor layers based on platinum tetrakis(pentafluorophenyl)porphyrin (PtTFPP) as the sensitive dye. Different polymers were prepared and investigated in order to retrieve information on the influence of the anchor group and the side chain attached to the polymer backbone on their performance as matrix material for the dye. Bulky side groups increased the oxygen permeability through ROM polymer layers, especially when the bulky group was directly attached via an anchor group to the polymer backbone without any aliphatic spacer in between. Sensor layers made of poly(endo,exo[2.2.1]bicyclo-5-heptene-2,3-dicarboxyclic acid di-tert-butylester) and PtTFPP exhibited the highest τ₀/τ ratio and responded strongly to small amounts of oxygen.     

四(4-硝基苯基)卟啉和四(4-氨基苯基)卟啉的合成

四（４氨基苯基）卟啉（ＴＡＰＰ）是含有４个反应活性基团的卟啉衍生物,可在模拟某些生物过程或氧化还原反应的树枝状或簇状分子中作为富电子中心,也可直接用来制备光电器件或作为光电功能聚合物的功能单体和交联剂,因此,ＴＡＰＰ的合成研究具有重要意义［１］．...     

Aqueous cationic olefin polymerization using tris(pentafluorophenyl)gallium and aluminum

Tris(pentafluorophenyl)gallium ( 3 ) and aluminum ( 7 ) are active coinitiators for the production of medium‐high molecular weight (MW) polymers of styrene and isobutene (IB) under aqueous reaction conditions. Strong Brønsted acids formed in situ by reaction of these coinitiators with background moisture present in the monomer droplet ( 5 and 8 , respectively) are believed to be responsible for inducing cationic polymerization of these monomers. Of the two, 7 is the most active for IB polymerization in both aqueous media and anhydrous aliphatic solvents. These results are in contradistinction to tris(pentafluorophenyl)boron ( 2 ), which is incapable of polymerizing IB in aqueous or aliphatic media. The MWs of the polyisobutenes (PIBs) produced under aqueous conditions by either coinitiator greatly exceed those formed under similar reaction conditions by the strongly acidic chelating diborane (1,2‐C₆F₄[B(C₆F₅)₂]₂, 1 ) or diborole (1,2‐C₆F₄[9‐BC₁₂F₈]₂, 6 ). Both 3 and 7 are readily synthesized from the corresponding Group 13 halide compounds in conjunction with bis(pentafluorophenyl)zinc ( 4 ). Aqueous polymerization of IB dissolved in aliphatic solvents with 3 or 7 can yield PIBs with relatively narrow polydispersities. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Characterization of the 1 : 1-Adducts of In(C6F5)3 with Acetonitrile,Glyme, and DMAP (DMAP = 4-(N,N-dimethylamino)pyridine), and [PNP][In(C6F5)4] (PNP = bis(triphenylphosphinanyliden)immonium) – the Crystal Structure of [PNP][In(C6F5)4]

In(C₆F₅)₃ · CH₃CN and In(C₆F₅)₃ · glyme were synthesized from InCl₃ and Cd(C₆F₅)₂ in CH₃CN or glyme in 43% and 35% yield, respectively. Replacement of CH₃CN or (C₂H₅)₂O by DMAP yielded the corresponding 1 : 1-adduct. [PNP][In(C₆F₅)₄] was best prepared from the corresponding cesium salt which was best synthesized from the reaction of stoichiometric amounts of In(C₆F₅)₃ · CH₃CN, (CH₃)₃ SiC₆F₅ and CsF in good yield. [PNP][In(C₆F₅)₄] crystallizes in the triclinic space group P 1, a = 1104.9(4) pm, b = 1442.4(6) pm, c = 1833.8(8) pm, α = 110.87(2)°, β = 92.04(3)°, γ = 96.55(3)°, Z = 2.     

A highly regioselective bisselenation of allenes with diphenyl diselenide catalyzed by tetrakis(triphenylphosphine)palladium(0)

Tetrakis(triphenylphosphine)palladium(0) acts as an effective catalyst for highly regioselective bisselenation of allenes with diphenyl diselenide.     

Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin

The reaction of 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin (TCPP) with Cd(II), Pb(II), Hg(II) and Zn(II) was studied spectrophotometrically and kinetics, equilibrium constants as well as photodecomposition of complexes were determined. It was verified that these metal ions with large radius accelerate the incorporation reaction of zinc into TCPP. On the basis of the mechanism and kinetics of this reaction, a sensitive method for the spectrophotometric determination of trace amounts of Zn(II) has been developed. The molar absorptivity of examined Zn-TCPP complex and Sandell's sensitivity at 423 nm were 3.5×10⁵ M⁻¹ cm⁻¹ and 18.3 ng cm⁻². The detection limit for the recommended procedure was 1.4×10⁻⁹ M (0.9 ng ml⁻¹) and precision in range 20-100 ng ml⁻¹ not exceeds 2.7% RSD. The proposed method applied for zinc determination in natural waters and nutritional supplement was compared with AAS results and declared value.     

Tris(pentafluorophenyl)borane catalyzed Ferrier azaglycosylation with sulfonamides and carbamates

The reaction of tri-O-acetyl-d-glucal with different nitrogen nucleophiles was effectively promoted by a catalytic amount of tris(pentafluorophenyl)borane for the first time in acetonitrile at room temperature to produce a variety of azapseudoglycals via Ferrier rearrangement in good yields and preferential anomeric selectivity.     

Nucleophilic difluoromethylation and trifluoromethylation using tetrakis(dimethylamino)ethylene (TDAE) reagent

In an effort to find new methodologies to introduce difluoromethylene and trifluoromethyl moieties into organic molecules of synthetic and biological interest, tetrakis(dimethylamino)ethylene (TDAE) was found to be an effective reductant of a series of good electron-acceptors such as bromodifluoromethyl heterocycles, chlorodifluoromethylated ketones as well as perfluoroalkyl iodides; the corresponding anions thus generated under very mild conditions, were successfully engaged in a number of intra- and intermolecular coupling reactions with a series of electrophiles (aldehydes, ketones, α-keto esters, N-tosyl aldimines, acyl chlorides, diol sulphates, disulfides, and diselenides). The corresponding adducts were usually obtained in moderate to good yields and the present method was found to be as good or even better as other most popular approaches. This paper gives an overview of our research efforts in this area as well as results from other groups.     

动态磁涂覆混合固定相开管毛细管电色谱中电渗流的特征

将表面分别被改性成C18和氨基的磁性纳米颗粒按照不同比例混合,制备成具有不同分离选择性的混合固定相,进一步采用动态磁涂覆的方法制备开管毛细管电色谱柱。通过考察这种色谱柱中不同种类固定相表面物理化学性质对电渗流的综合影响,从理论上说明了其电渗流的特征。分别在不同固定相配比及不同涂覆长度条件下进行实验,理论与实验结果相符,证实通过调节固定相配比或磁铁对数可以便捷地调节电渗流的大小。     

Separtation of metal tetrakis(p-tolyl)porphine complexes by reversed-phase high-performance liquid chromatography

Summary The feasibility of reversed-phase high-performance liquid chromatography for the separation of several metal complexes ofmeso-tetrakis(p-tolyl)porphine (TTP) is described. A combination of an octadecyl-bonded stationary phase with a non-aqueous polar mobile phase, such as an acetone-acetonitrile mixture, has proved effective for the separation. Thus, the TTP complexes of Mg, VO, Ni, Cu, Zn, and Pd and also TTP free acid were successfully separated in about 10min on a Li-Chrosorb RP-18 column (7m, 250×4mm i.d.) with a 7030 (vol/vol) mixture of acetone and acetonitrile at a flow-rate of 1 mlmin^–1.     

Structural patterns in clathrates and crystalline complexes of zinc-tetra(4-chlorophenyl)porphyrin and zinc-tetra(4-fluorophenyl)porphyrin

Twelve new crystalline materials based on zinc-tetra(4-chlorophenyl)porphyrin (8 compounds) and zinc-tetra(4-fluorophenyl)prophyrin (4 compounds) building blocks have been prepared and characterized by X-ray diffraction analysis. Several different modes of guest solvent incorporation into the porphyrin lattice, including enclathration (of solvents of low polarity) and complex formation (with strong Lewis bases), and of intermolecular organization have been detected. Unique interporphyrin architectures, affected by directional Cl...Cl interactions, characterize most of the known solid structures of the chlorosubstituted materials. A small number of the latter, as well as the fluorosubstituted derivatives, exhibit interporphyrin arrangements of the type which are commonly observed in the clathrates of unsubstituted tetraphenylmetalloporphyrins. The pore structure of these compounds is affected to a large extent by the nature of the incorporated solvate and, consequently, the degree of coordination of the metal center. In crystals of four-coordinate porphyrins the solvent guest components are usually incorporated into channel-type cavities formed between columns and layers of densely stacked hosts. In five-coordinate and six-coordinate materials the guest sites coincide with the axial coordination sites of the porphyrin metal atoms. The latter structures reveal a tight fit between adjacent layers of the complexed entities, the axial ligands of one layer being incorporated into localized interporphyrin cavities of another layer. Dipolar forces play also an important role in the interporphyrin organization.Supplementary Data relating to this article have been deposited with the British Library as supplementary publication No. SUP 82183 (97 pages).     

Generation of bis(pentafluorophenyl)borane-dimethyl sulfide complex as a solution of hexane and its application to hydroboration of alk-1-yne with pinacolborane

A solution of bis(pentafluorophenyl)borane-dimethyl sulfide complex in hexane was generated by redistribution between tris(pentafluorophenyl)borane and borane-dimethyl sulfide complex. In the resulting solution a stoichiometric hydroboration of alk-1-yne with pinacolborane proceeded well at room temperature to afford (E)-alk-1-enylboronic acid pinacol ester in high yield. Bis(pentafluorophenyl)borane-dimethyl sulfide complex served as a mediator for the hydroboration.     

Use of tris (pentafluorophenyl) bismuth as an arylating reagent

It has been shown that tris(pentafluorophenyl)bismuth arylates polyfluorinated electrophilic compounds in the presence of cesium fluoride.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 171–172, January, 1994.     

Inclusion Complexes of Cyclodextrins with Tetrakis(4-carboxyphenyl)porphyrin and Tetrakis(4-sulfonatophenyl)porphyrin in Aqueous Solutions

In neutral and alkaline solutions, tetrakis(4-carboxyphenyl)porphyrin (TCPP) and tetrakis(4-sulfonatophenyl)porphyrin (TSPP) form 1:1 and 2:1 host–guest inclusion complexes with -cyclodextrin (-CD), -cyclodextrin (-CD), and 6-deoxy-6-diethylamino--CD (DEA--CD), except for DEA--CD in alkaline solution. On the other hand, TCPP and TSPP form only 1:1 inclusion complexes with 6-deoxy-6-dihexylamino--CD (DHA--CD). The limited solubilities of DEA--CD in alkaline solution and DHA--CD are likely responsible for no observation of the 2:1 inclusion complex containing DEA--CD in alkaline solution and that containing DHA--CD. The equilibrium constants (Ks) of TCPP and TSPP for the formation of the inclusion complexes have been estimated from the absorption and/or fluorescence intensity changes in neutral and alkaline solutions. The K₂ values, which are the equilibrium constants for the formation of the 2:1 host–guest inclusion complex from the 1:1 inclusion complex, are about one tenth the corresponding K₁ values, except for the -CD–TSPP system in alkaline solution. In neutral solution, where DEA--CD and DHA--CD are in protonated forms, the electrostatic force operates between DEA--CD (DHA--CD) and TCPP (TSPP), leading to the greater K values than those in alkaline solution, where DEA--CD and DHA--CD exist as neutral species.     

Interactions of tetrakis(4-N-methylpyridyl)porphyrin with cyclodextrins and disodium phthalate in aqueous solution

In pH 7.3 buffers, the interactions of a cationic porphyrin, tetrakis(4-N-methylpyridyl)porphyrin (TMPyP), with cyclodextrins (CDs) and disodium phthalate (DSP) have been examined by means of absorption, fluorescence, and induced circular dichroism spectroscopy. α-CD, β-CD, and γ-CD form a 1:1 inclusion complex with a TMPyP monomer, which dimerizes in solution without CD. TMPyP also forms a 1:1 organic cation–organic anion complex with DSP. The 1:1 TMPyP–DSP complex forms a ternary CD–TMPyP–DSP inclusion complex with α-, β-, and γ-CD, in which a DSP molecule is not incorporated into the CD cavity. From the fluorescence intensity change, the␣equilibrium constants have been evaluated for the formation of the inclusion complexes and the organic cation–anion complexes.     

Synthesis and structural characterization of carbon-centered tris(pentafluorophenyl)silyl derivatives

A general method for the synthesis of carbon-centered tris(pentafluorophenyl)silyl derivatives (RSi(C₆F₅)₃) by reaction of trichlorosilanes (RSiCl₃) with pentafluorophenylmagnesium bromide was described. The crystal structures of obtained compounds were studied by X-ray diffraction analysis (7 structures). The peculiarities of crystal packing were analyzed by means of DFT calculations.