ACTA PHYSICO-CHIMICA SINICA Scope of the Journal

1)THERMODYNAMICS,KINETICS,AND STRUCTURAL CHEMISTRY(chemical equilibrium and thermodynamic parameters,calorimetry,nonequilibrium thermodynamics and dissipative structure,statistical thermodynamics,macrokinetics,molecular dynamics,ultrafast dynamics,excited states,solution chemistry,complex fluids,solution structure,atmospheric chemistry,dynamic structure,molecular structure,bulk structure,clusters,spectroscopy)2)THEORETICAL AND COMPUTATIONAL CHEMISTRY(quantum chemistry,statistical mechanics.simulation methods and application,computational chemistry,chemical informatics)     

Multivalent metal–sulfur batteries for green and cost-effective energy storage: Current status and challenges

Multivalent metal-sulfur(M-S,where M=Mg,Al,Ca,Zn,Fe,etc,) batteries offer unique opportunities to achieve high specific capacity,elemental abundancy and cost-effectiveness beyond lithium-ion batteries(LIBs).However,the slow diffusion of multivalent-metal ions and the shuttle of soluble polysulfide result in impoverished reversible capacity and limited cycle performance of M S(Mg-S,Al-S,Ca-S,Zn-S,Fe-S,etc.) batteries.It is a necessity to optimize the electrochemical performance,while deepening th...     

蒙古蒿精油化学成份的研究I.

The chemical constituents of the essential oil from the leaves of artemisia mongolica Fisch. were separated by gas chromatography employing glass capillary eolumns and identified by GC-MS-COM. 30 components have been separated and identified, i.e. 2-methyl-2-butene, methylene cyclopentane, 7,7-dimethyl-3-methylen-bicyclo-(3, 1, 1) heptane, α-thujene, α-pinene, camphene, 1-octen-3-o1, β-thujene, β-pinene, α-phellandrene, bornylene, p-cymene, terpinen-1-o1, artemisia ketone, γ-terpinene, β-terpineol, 3,7,7-trimethyl-bicyclo-(3, 1,1)-2-heptanol, α-terpinolene, verbenone, linalool iso-thujone, thujone, camphor, isopulegone, isoborneol, terpinen-4-o1, α-terpineol, myrtenol, trans- carveol, cis-carveol.     

生物综合工業(微生物工業)(中)

第二、培養基的條件培養基的功用,一方面是供给菌種生长的需要,另一方面是供给菌種综合产品的原料。其成分可分为两類:第一類为炭水化物,如糖飴,玉黍粉,麥粉,馬鈴薯,紙漿废液,葡萄糖等。這些是酒精,丙酮戊醇,构椽酸,酵母等工業的重要原料。其功用是供给微生物生长的能(Energy)。第二類成分是蛋白性的材料如酪素,玉黍浆(Corn steep)粟米,蛋清,鱼肉,肉膏,蛋白脒,     

电感耦合等离子体发射光谱法(ICP-AES)测定黑豆和红小豆中15种元素

采用ICP—AES法同时测定黑豆和红小豆中Na,Sn,Ca,Zn,Cu,Mg,Al,Fe,P,K,Si,Se,Ba,Mn,M015种元素含量,并对各元素进行了加标回收实验,黑豆和红小豆中各元素的平均回收率在93．11％～102．15％,相对标准偏（RSD）在0．83％0～2．8％,检出限介于0．11～14．09Fg／L。建立了简便、快速、准确和稳定的测定黑豆和红小豆中元素的测定方法。结果显示在黑豆和红小豆中K,Ca,P,Mg,Mn,Fe,Zn等常量元素和微量元素含量较高。红小豆中Ca,Mg,Fe,Zn等营养元素的含量较黑豆中的高。     

粒径分布对水焦浆性质的影响

分析研究了不同粒径分布的石油焦成浆性及制备水焦浆的流变性和稳定性。结果表明,石油焦的成浆性较好,成浆浓度近70%,浆体的表观黏度均随浓度的增大而增大。粒径分布越宽,越有利于堆积,堆积效率越高,可制浆浓度越高,制备水焦浆的最佳药剂量越低,采用萘系分散剂制备的水焦浆呈胀塑性流型,粒径分布越宽,胀塑性越弱,利用静置观察法与Turbiscan Lab稳定性分析仪测定相结合评价水焦浆的稳定性,水焦浆的稳定性差,且粒径越大,析水率越低,沉降区的焦粉颗粒越易发生聚结,底部越易产生硬沉淀,稳定性越差。颗粒聚结是水焦浆稳定性的主要影响因素。     

气相色谱用氦直流等离子体离子化检测器的研究

报道三种不同类型的气相色谱用氦直流等离子体离子化检测器。以氦气为载气和工作气体, 白金电极为放电电极, 通过测量检测器的工作参数, 考察了检测器对H2, O2, Ar, N2, CH4, CO, CO2等永久气体的响应特性及分析性能, 并应用于实际样品分析。对检测器的离子化机理进行了研究和探讨。     

河南大学化学化工学院简介

河南大学化学化工学院是河南大学成立较早、规模较大的院系之一,始建于1923年,重建于1959年,时称化学系,Ig85年设立工科,1989年改称化学化工系,1995年更名为化学化工学院。学院现有教职工111人,其中国务院特殊津贴获得者1名,省优秀专家2名,校特聘教授4名,博士生导师6名,硕士生导师71名,教授、副教授67名,具有博士学位教师48G。     

Synthesis and structure-insecticidal activity relationship of novel phenylpyrazole carboxylic acid derivatives containing fluorine moiety

A series of novel phenylpyrazole carboxylic acid derivatives containing fluorine moiety,i.e.,diamides 11,simple aryl-bearing amides 12 and acylthioureas 14 were successfully synthesized based on the key fluo ro-containing phe nylpyrazole acid intermediate.The new compounds were identified and confirmed by melting point,1H NMR,13C NMR and elemental analysis or HRMS.The bioassay results indicated that some of the compounds possessed excellent insecticidal activities towards oriental armyworm,diamondback moth and corn borer at low concentrations.For examples,compounds 11a,11e-g and 14b exhibited remarkable larvicidal activities with LC50 values of 0.13-0.39 mg/L and 0.0002-0.0014 mg/L against oriental armyworm and diamondback moth,respectively,were comparable with those of the control chlorantraniliprole.Particularly,lie were found superior to chlorantraniliprole in oriental armyworm tests(LC50:0.23 mg/L vs.0.26 mg/L);11a,lie,11f and 14c in diamondback moth tests with LC50 values of 0.0002 mg/L,0.0002 mg/L,0.0008 mg/L and 0.0005 mg/L,respectively,we re more effective than that of chlorantraniliprole.In addition,12 a also showed a promising insecticidal potential and development/optimization advantage.Compounds 11a,lle-g,12a,14b and 14c could be considered as possible new leading structures for further study.The SAR investigation indicated that the compounds with fluorine motif(e.g.,-F,-CF2H,-CF3)held apparently favorable insecticidal potentials,which provided useful guidance for further design/development of new phenylpyrazole-containing agrochemicals.     

Synthesis and Crystal Structure of a N,N,N＇-tri（2-hydroxy-5-methylbenzyl）-l,2-ethanediamine

An aminophenol ligand, N,N,N＇-tri（2-hydroxy-5-methylbenzyl）-l,2-ethanediamine, was prepared through the Marmich reaction, and structurally characterized by NMR, IR, MS and single-crystal X-ray diffract...     

Distribution of olfactory marker protein on a tissue section of vomeronasal organ measured by AFM

Distribution of olfactory marker protein (OMP) on a tissue section of vomeronasal organ (VNO) was successfully measured by atomic force microscopy (AFM). Anti-OMP antibodies were covalently crosslinked with the tip of the AFM and were used as a probe to observe the distribution of OMP on a tissue section. First, force measurements were performed using a glass surface on which OMP was covalently immobilized to verify the success of tip modification. Clear differences of interaction forces were observed between a specific pair and the control experiments, indicating that the tip preparation succeeded. Next, distributions of OMP on the tissue section were observed by AFM and were compared with immunohistochemical observations. For large scale observation, a microbead was used as a probe in the AFM measurements. The results of the AFM measurements were well overlapped with that of immunohistochemistry, confirming the reliability of our method. A mapping of the AFM measurement with high resolution was also successfully obtained, which showed an advantage of the application of the AFM measurement in analysis of proteins on the tissue section.     

Recent progress in measurements of oscillatory forces and liquid properties under confinement

The present review paper focuses on direct measurements of oscillatory forces. Beside the surface forces apparatus (SFA), atomic force microscopy (AFM) has emerged as the most commonly used technique to measure surface forces. Recent instrumental advances of both methods are highlighted in the review. Different systems, showing oscillatory forces are classified. Principle distinction is made between 1-component liquids (water, organic liquids and liquid crystals), pseudo 1-component liquids (ionic liquids and microemulsions) and 2-component liquids (dispersions containing polyelectrolytes, micelles or nanoparticles). In the last few years, the oscillatory force studies address particle characterisation, synergistic effects in multicomponent systems, the introduction of ‘switchable’ forces, and resolving liquid properties under confinement. Last but not least, the ability of AFM and SFA to measure oscillatory forces is discussed.     

The quest for the best nonpolarizable water model from the adaptive force matching method

The recently introduced adaptive force matching (AFM) method is used to develop a significantly improved pair‐wise nonpolarizable potential for water. A rigid version of the potential is also presented to enable larger time steps for biological simulations. In this work, it is demonstrated that the AFM method can be used to systematically assess the importance of each functional term during the construction of a force field. For a water potential, it is established that a single off‐atom charge center (M) in the plane of water outperforms two out‐of‐plane charge sites for reproducing intermolecular forces. The four‐site pair‐wise nonpolarizable force field developed in this work rivals some of the most sophisticated polarizable models in terms of reproducing accurate ab initio forces. The force fields are parameterized to perform best in the temperature range from 0 to 40°C. Equilibrium and dynamical properties calculated with the flexible and rigid force fields are in good agreement with experimental results. For the flexible model, the agreement improves when path integral simulation is performed. These force fields provide high‐quality results at a very low computational cost and are thus well suited to atomistic scale biological simulations. The AFM method provides a mechanism for selecting important terms in force field expressions and is a very promising tool for producing accurate force fields in condensed phases. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

基于原子力显微镜的单分子力谱在生物研究中的应用

原子力显微镜被广泛应用于生物研究领域,基于原子力显微镜的单分子力谱可以在单分子、单细胞水平上研究生物分子内和分子间的相互作用。 本文介绍了原子力显微镜单分子力谱在生物分子间相互作用、蛋白质去折叠、细胞表面生物分子、细胞力学性质和基于单分子力谱成像等研究中的最新进展。     

Determination of solid surface tension from particle-substrate pull-off forces measured with the atomic force microscope

Atomic force microscopy (AFM) is capable of solid surface characterization at the microscopic and submicroscopic scales. It can also be used for the determination of surface tension of solids (gamma) from pull-off force (F) measurements, followed by analysis of the measured F values using contact mechanics theoretical models. Although a majority of the literature gamma results was obtained using either Johnson-Kendall-Roberts (JKR) or Derjaguin-Muller-Toporov (DMT) models, re-analysis of the published experimental data presented in this paper indicates that these models are regularly misused. Additional complication in determination of gamma values using the AFM technique is that the measured pull-off forces have poor reproducibility. Reproducible and meaningful F values can be obtained with strict control over AFM experimental conditions during the pull-off force measurements (low humidity level, controlled and known loads) for high quality substrates and probes (surfaces should be free of heterogeneity, roughness, and contamination). Any probe or substrate imperfections complicate the interpretation of experimental results and often reduce the quality of the generated data. In this review, surface imperfection in terms of roughness and heterogeneity that influence the pull-off force are analyzed based upon the contact mechanics models. Simple correlations are proposed that could guide in selection and preparation of AFM probes and substrates for gamma determination and selection of loading conditions during the pull-off force measurements. Finally, the possibility of AFM measurements of solid surface tension using materials with rough surfaces is discussed.     

Micromechanical testing of individual collagen fibrils

A novel method based on AFM was used to attach individual collagen fibrils between a glass surface and the AFM tip, to allow force spectroscopy studies of these. The fibrils were deposited on glass substrates that are partly coated with Teflon AF. A modified AFM tip was used to accurately deposit epoxy glue droplets on either end of the collagen fibril that cross the glass-Teflon AF interface, as to such attach it with one end to the glass and the other end to the AFM tip. Single collagen fibrils have been mechanically tested in ambient conditions and were found to behave reversibly up to stresses of 90 MPa. Within this regime a Young's modulus of 2-7 GPa was obtained. In aqueous media, the collagen fibrils could be tested reversibly up to about 15 MPa, revealing Young's moduli ranging from 0.2 to at most 0.8 GPa.     

碳纳米管原子力显微镜针尖对脱氧核糖核酸高分辨率成像研究

运用自制的碳纳米管原子力显微镜针尖,在液体中观察了脱氧核糖核酸（DNA）分子的精细结构。结果表明,运用碳纳米管针尖获得的DNA分子的高度与电子显微镜的结果非常接近,且没有造成样品的变形损伤;碳纳米管针尖得到的DNA分子的宽度与真实值相近,减小了原子力显微镜成像的增宽效应,这是用传统的硅针尖无法获得的。DNA分子精细结构的高分辨率图像的获得为研究其功能提供了有价值的信息。     

qPlus型非接触原子力显微技术进展及前沿应用

原子力显微镜(AFM)通过探测针尖与样品之间的相互作用力获得样品表面的结构信息。基于qPlus传感器的非接触原子力显微镜(NC-AFM)在传统AFM的基础上进一步提升了空间分辨率,为研究表面物理和化学过程提供了一种新的成像和谱学研究技术。本文首先介绍NC-AFM的基本构造、高分辨成像机制和力谱测量等工作原理,总结了近年来NC-AFM在表面在位化学反应、低维材料表征和表面电荷分布测量等方面的应用,探讨了NC-AFM技术的发展与完善,展望了NC-AFM面临的机遇和挑战。     

Studying Aggregate in Lysozyme Solution by Atomic Force Microscope

The aggregates in lysozyme solution with different NaCl concentration were investigated by Atomic Force Microscope(AFM).The AFM images show that there exist lysozyme monomers,n-mers and clusters in lysozyme solution when the conditions are not suiable for crystal growth.In favorable conditions for crystal growth,the lysozyme clusters disappear and almost only monomers exist in solution.     

原子力显微镜在生物大分子结构研究中的应用进展

评述了原子力显微镜（ａｔｏｍｉｃ ｆｏｒｃｅ ｍｉｃｒｏｓｃｏｐｙ,ＡＦＭ）的成镜模式与探针技术的发展以及在脱氧核糖核酸、蛋白质和多糖等生物大分子结构研究中的应用进展,并展望了原子力显微镜在此领域的发展前景。