Ion and solvent transfer discrimination at a nickel hydroxide film exposed to LiOH by combined electrochemical quartz crystal microbalance (EQCM) and probe beam deflection (PBD) techniques

A combined electrochemical quartz crystal microbalance (EQCM) and probe beam deflection (PBD) instrument was used to monitor the mobile species transfers associated with the redox processes of thin (Γ100–150 nmol cm⁻²) α- and β-nickel hydroxide films exposed to aqueous LiOH solution. A comparison of the measured PBD signal with the predicted PBD profiles, calculated by temporal convolution analysis of the current and mass responses, enabled the contributions to redox switching of anion (OH⁻) and solvent (H₂O) transfers to be discriminated quantitatively. The responses from the combined instrument are reconciled in terms of H⁺ deintercalation/intercalation within the nickel hydroxide structure as OH⁻ ions enter/exit the film. Hydroxide ion movement is associated with a counterflux of water. Thin nickel hydroxide films show a gradual α→β phase transformation with continuous voltammetric cycling, especially when the films are exposed to high concentrations of electrolyte. α-Films are characterised by OH⁻ transfers that dominate the H⁺ and H₂O movements; β-films are characterised by an increased participation of water and protons to the exchange dynamics.     

Transport of ionic charge and solvent in poly(3-octylthiophene) films: An electrochemical quartz crystal microbalance study

The results of a study of poly(3-octylthiophene) films with the aid of an electrochemical quartz microbalance are presented. The effect of the nature of the electrolyte anion on the determined weights of mobile species that are transported through the film/electrolyte interface is discussed. The obtained results point to a substantial role played by the solvent transport in the course of the electrode reaction. The results concerning the influence exerted by the electrode material on the observed regularities are presented.     

Adsorption behaviors of poly(N-p-vinylbenzyl-4-o-beta-d-galactopyranosyl-[1-->4]-d-gluconamide) by quartz-crystal microbalance

Adsorption behaviors of amphiphilic poly(N-p-vinylbenzyl-4-o-beta-d-galactopyranosyl-[1-->4]-d-gluconamide) (PVLA) on the polystyrene (PS) surface was studied using 27 MHz quartz-crystal microbalance (QCM). The amount of adsorbed PVLA on PS surface was increased with an increase of PVLA concentration as a Langmuir-type in a monolayer. The saturated mass change (DeltaM(max)) and association constant (K(a)) of PVLA on PS surface were 498.6 ng/cm(2) and 1.93 x 10(7)M(-1), respectively. The adsorbed PVLA on PS surface was specifically recognized by Allo A lectin due to specific interaction between galactose moieties in the PVLA and Allo A. The hydrophobic interaction between hydrophobic main chain of PVLA and hydrophobic surface of PS was reduced in the presence of urea and the diameter of PVLA aqueous solution was decreased with an increase of urea concentration.     

Electrochemical quartz crystal microbalance study of ion transport accompanying charging-discharging of poly(pyrrole) films

Electrochemical quartz crystal microbalance studies on poly(pyrrole) electrodes revealed a complex nature of the potential-dependent sorption of ionic substances. It is found that the relative contribution of anions and cations to the overall charge transport process depends upon several factors, such as the oxidation state of the polymer, the composition of the supporting electrolyte as well as on the film thickness. The phenomena observed are discussed in terms of morphological transformations arising as a result of interactions between the polymer and the mobile substances. Received: 21 August 1998 / Accepted: 21 October 1998     

A kinetic study of protein binding to ecabet sodium using quartz-crystal microbalance.

To define the mechanism of the protection by ecabet sodium of the gastric mucosa, the characteristics of protein binding of this drug were investigated using a quartz-crystal microbalance (QCM) method. The binding rate constants (kb) and the binding amounts (delta m) were obtained from time courses of the frequency decrease (mass increase) of the QCM. The binding constants to proteins of two ecabet analogues (G1, ecabet type and G2, non-ionic ecabet type) were dependent on the pH, leading to large kb values at the acidic region. Furthermore, the kb values of G1 with the addition of bovine serum albumin (BSA) and bovine serum fibrinogen (BSF) at the acid region were larger than those of G2. The difference in kb values between G1 and G2 for porcine gastric mucin (PGM) is hardly discernible. Ecabet seems to be more heavily distributed in the ulcerous areas than in the intact mucosa, judging from the large binding constants of this drug to BSA and BSF compared with those to PGM. It is suggested that ecabet is bound to proteins by hydrophobic interaction, moreover, the electrostatic interaction between this drug and proteins (BSA and BSF) occurs at acidic pH region. On account of these interactions, ecabet sodium seems to have a more protective effect on an ulcer at intraluminal acidity than sucralfate. Finally, QCM was found to be a useful technique for detecting quantitatively the time course of binding proteins with drug.     

ESR study for ion beam induced phenomena in poly (tetrafluoroethylene-co-hexafluoropropylene) (FEP)

Trapped radicals induced in poly (tetrafluoroethylene-co-hexafluoropropylene) (FEP) were observed by X-band electron spin resonance (ESR) spectroscopy at room temperature (RT) under atmospheric field after an irradiation with various kinds of high energy ion beams (6 MeV/u). The irradiation was carried out to a stacked FEP films under vacuum (<4E?4 Pa) at RT with various fluences from 1.0×10⁹ to 1.0×10¹¹ ions/cm². All ESR spectra indicated an existence of peroxy radicals in each of the FEP films without any relation to a kind of ion and a penetration depth. Obtained depth profiles of radical concentrations induced with each ion beam almost correspond to those of stopping power. The trapped radical concentrations were strongly dependent on stopping power. It was found that G-value of trapped radicals by ion beam irradiation was decreased with increasing a stopping power, and was less than the case of gamma-rays irradiation.     

Protein adsorption on surfaces: dynamic contact-angle (DCA) and quartz-crystal microbalance (QCM) measurements

Adsorption of the protein bovine serum albumin (BSA) on gold has been tested at various concentrations in aqueous solution by dynamic contact-angle analysis (DCA) and quartz-crystal microbalance (QCM) measurements. With the Wilhelmy plate technique advancing and receding contact angles and the corresponding hysteresis were measured and correlated with the hydrophilicity and the homogeneity of the surface. With electrical admittance measurements of a gold-coated piezoelectrical quartz crystal, layer mass and viscoelastic contributions to the resonator's frequency shift during adsorption could be separated. A correlation was found between the adsorbed mass and the homogeneity and hydrophilicity of the adsorbed film.     

A study of ion charge transfer on electrochemical behaviors of poly(vinylidene fluoride)-derived carbon electrodes

In this work, porous carbon with a high specific surface area as electrode materials for supercapacitors are obtained by a carbonization process at various temperatures from 700 °C to 1000 °C without activation process using poly(vinylidene fluoride) (PVDF) as a carbon precursor. The electrochemical performance is characterized by cyclic voltammetry and galvanostatic charge–discharge cycling performance using two-electrode system in 6.0 M KOH as an aqueous electrolyte. The results indicate that carbonization temperature significantly affected the specific surface area and pore volume of the PVDF-derived carbons and their capacitive behavior. In particular, the electrochemical performance of the prepared PVDF-derived carbon is determined by both the electric double-layer capacitance and the pseudo-capacitance resulting from the residual surface functional groups on PVDF-derived carbons.     

Probe beam deflection study of ion exchange in self-assembled redox polyelectrolyte thin films

Probe beam deflection during chronoamperometric oxidation-reduction of osmium complex in layer-by-layer self-assembled redox active polyelectrolyte multilayers has shown that the nature of the charge in the topmost layer determines the ion flux that balances the redox charge.     

Enzymatic preparation of biotinylated naturally-occurring sialylglycan and its molecular recognition on a quartz-crystal microbalance

A biotinylated sialylglycan was prepared enzymatically by endo-M, and binding behavior of an SSA lectin was studied on a different coverage of a sialylglycan-immobilized 27 MHz quartz-crystal microbalance (QCM).     

Simultaneous anomalous reflection and quartz-crystal microbalance measurements of protein bindings on a gold surface

Protein bindings onto a gold surface were detected simultaneously by QCM (delta F(water)) and anomalous reflection (deltaR) of gold on the same surface in aqueous solutions; the obtained delta F(water)/deltaR values correlated with surface areas and viscosity of proteins.     

Physical properties of ion beam treated electrospun poly(vinyl alcohol) nanofibers

We show that the mechanical properties of nano-sized electrospun poly(vinyl alcohol) fibers can be modified using broad-energy ion beam implantation. The elastic moduli were determined using atomic force microscopy multi-point mechanical bending tests on individual fibers before and after treatment. With a dose of 8.0 × 10¹⁵ ions/cm² of nitrogen ion we observed 30% increases in fiber elastic modulus with a simultaneous fiber diameter reduction. Two additional doses of nitrogen ion as well as a 8.0 × 10¹⁵ ions/cm² of helium ion treatment showed that this stiffness improvement effect was dependent on ion dosage and ion species. The surface morphological features of the fiber mat were shown to be unaltered due to the ion beam treatment. Key chemical modifications via nitrogen ion treatment were the introduction of the functional groups amine and amide. These groups are important in promoting cell compatibility on polymer surfaces.     

A comparative study of the enhancement of molecular emission in a spatially confined plume through optical emission spectroscopy and probe beam deflection measurements

The spatial confinement effects of shock wave on the expansion of a carbon plume induced by pulsed laser ablation of graphite in air and the enhancement of the plume emission were studied by optical emission spectroscopy and probe beam deflection measurements. A metal disk was set in the way of the ablation-generated shock wave to block and reflect the supersonically propagating shock wave. The reflected shock wave propagated backwards and confined the expanding plume. The optical emission of CN molecules was enhanced in contrast to the case without the block disk and the emission enhancement was dependent on the position of the disk. Based on the results of time-integrated and -resolved optical emission spectroscopy, and the time- and space-resolved probe beam deflection measurements, the processes occurring in the plume were discussed and the mechanisms responsible for the enhancement of molecular emission in the spatially confined plume were investigated.     

Quartz crystal microbalance study of protein adsorption kinetics on poly(2-hydroxyethyl methacrylate)

The interaction of macromolecules with artificial biomaterials may lead to potentially serious complications upon implantation into a biological environment. The interaction of one of the most widely used biomaterials, polyHEMA, with lysozyme, bovine serum albumin (BSA), and lactoferrin was investigated using quartz crystal microbalance (QCM). The concentration dependence of adsorption was measured for the aforementioned proteins individually as well as for lysozyme-BSA, and lysozyme-lactoferrin combinations. An extension of Voinova's viscoelastic model to n layers was used to create thickness-time graphs for adsorption. For each of lactoferrin and lysozyme, two distinctly different timescales of adsorption could be differentiated. However, the mechanisms of adsorption appeared to differ between the two. Negative dissipation shifts were measured for low concentrations of lysozyme, trending to positive dissipation at higher concentrations. This suggested that lysozyme was adsorbed initially into the matrix, stiffening the hydrogel, and later onto the surface of polyHEMA. Additionally, trials with commercial no-rub cleaning solutions indicated little added effectiveness over buffer solutions. Mixtures of proteins showed behaviour which differed in some cases from the simple combination of single protein adsorption experiments.     

Supramolecular interactions between beta-cyclodextrin and hydrophobically end-capped poly(ethylene glycol)s: a quartz crystal microbalance study

In this study, the supramolecular interactions occurring between beta-cyclodextrin-based surfaces and macromolecular chains modified at one end with naphthyl, adamantyl, or phenyladamantyl hydrophobic groups were investigated by means of a quartz crystal microbalance. beta-Cyclodextrin-functionalized gold electrodes were obtained through the amide-coupling reaction between mono-6-deoxy-6-amino-beta-cyclodextrin and 11-mercaptoundecanoic acid self-assembled monolayer allowing the reproducible preparation of densely grafted surfaces with host properties. The interaction data obtained for the three different modified poly(ethylene glycol)s are in good agreement with our previous studies performed by high performance liquid chromatography and surface plasmon resonance. This evidences that the driving force for the supramolecular interaction is based on the inclusion of the hydrophobic terminal group of the chains within the cyclodextrin cavities. The reversibility of the inclusion process was proven through the regeneration of the original host properties of the sensing surfaces using sodium dodecylsulfate as a competitor for the desorption of the poly(ethylene glycol) chains.     

Study on the conformations in poly(p-chlorostyrene)-endothermic solvent (n-propylbenzene) and poly(p-chlorostyrene)-exothermic solvent(tert-butyl acetate) at theta temperatures by X-ray small-angle scattering

Summary Conformations of linear poly(p-chlorostyrene) (PPCS) in an endothermic solvent (n-propylbenzene) and an exothermic solvent (tert-butyl acetate) at theta temperatures have been investigated by X-ray small angle scattering. By analyzing X-ray small-angle scattering data for the two systems, the determination of molecular parameters and the comparison between an angular dependence of experimental scattering curve and that of theoretical one have been made, with the discussion on the asymptotic behavior of the scattering curve.The values of persistence length and the radius of gyration of a cross section of polymer chain were 10.5–13.0 Å and 3.7 Å for PPCS-n-propylbenzen, and 11.1–13.7 Å and 5.2 Å for PPCS-tert-butyl acetate, respectively.The values of persistence length seem to be little affected in both systems, while those of radius of gyration of a cross section of polymer chain seem to be affected appreciably by the condition whether the system is endothermic or exothermic. The effect of the distribution of the electron density on the cross section is almost equal in both solvents. From the asymptotic behavior of scattering curves, the system of PPCS-n-propylbenzene has the area of interface larger than that of PPCS-tert-butyl acetate. Agreements between theoretical and experimental scattering curves are found over the experimental angular regions. Thus, it is considered that conformations of PPCS in both theta conditions are the same as that of an ideal chain and only a radius of gyration of the cross section of the polymer chain assumes different values in two solvents.

---

Zusammenfassung Es wurde die Konformation vom linearen Poly(p-chlorostyrol) (PPCS) im endothermen Lösungsmittel (n-Propylbenzol) und im exothermen Lösungsmittel (tert-Butylacetat) bei den -Temperaturen untersucht. Die Bestimmung des molekularen Parameters, der Vergleich zwischen den Winkelabhängigkeiten der experimentellen und theoretischen Streukurven und die Diskussion über das asymptotische Verhalten der Streukurven wurden für die beiden Systeme durch Analyse der Röntgenkleinwinkelstreuungsdaten durchgeführt.Die Werte von Persistenzlängen und Querschnittsstreumassenradien waren 10.5–13.0 Å und 3.7 Å für PPCS-n-Propylbenzol, bzw. 11.1–13.7 Å und 5.2 Å für PPCS-tert Butylacetat.Es scheint, daß kein Einfluß auf die Persistenzlängen in den beiden Systemen existiert, während ein solcher auf die Querschnittsstreumassenradien der Polymerknäuel festzustellen ist, je nachdem das System endotherm oder exotherm ist. Die Verteilung der Elektronendichte hat die gleiche Wirkung auf den Querschnitt in den beiden Systemen.Nach dem asymptotischen Verhalten der Streukurven hat das System von PPCS-n-Propylbenzol die größere innere Oberfläche als die von PPCS-tert Butylacetat. Die Übereinstimmung zwischen den experimentellen und theoretischen Streukurven wird innerhalb der experimentellen Winkelbereiche festgestellt. Hieraus wird geschlossen, daß die Konformationen des PPCS unter Thetabedingungen dieselben sind, die Knäuel ideale Knäuel sind und nur die Werte von Querschnittsstreumassenradien der Polymerknäuel in den beiden Lösungsmitteln differieren.

---

---

With 10 figures and 1 table     

Polymer films on electrodes: investigation of ion transport at poly(3,4-ethylenedioxythiophene) films by scanning electrochemical microscopy

Electropolymerization, morphology characterization, and ion transport of poly(3,4-ethylenedioxythiophene) (PEDOT) films doped with different counterions (chloride, ferrocyanide (FCN), and poly(p-styrenesulfonate) (PSS-)) on a platinum electrode were investigated using scanning electrochemical microscopy (SECM) during both potential step (chronocoulometric) and cyclic voltammetric scans. An ultramicroelectrode (UME) tip was positioned close to the surface of a PEDOT-modified substrate electrode, and the responses of both electrodes to a substrate potential step or linear sweep were monitored simultaneously. Chloride or ferrocyanide (FCN) ejection during PEDOT reduction was shown to be a function of the reduction potential. The nature of the cation in the bulk solution was not found to be important in the kinetics of ion transport in PEDOT+/FCN- films. Direct evidence for the incorporation of cations of Ru(NH3)6(3+/2+) in a PEDOT film during its reduction was also obtained by SECM measurements. The adsorption of Ru(NH3)6(3+) in fully oxidized PEDOT+/PSS- films was observed and attributed to ion exchange between the Na+ co-ion of PSS- and Ru(NH3)6(3+) in the bulk solution.     

Transient kinetic studies of protein hydrolyses by endo- and exo-proteases on a 27 MHz quartz-crystal microbalance

We have compared endo- and exo-type protease reactions and characterized the enzymatic reaction mechanisms by determining all kinetic parameters (k(on), k(off), k(cat), K(d) = k(off)/k(on), and K(m) = (k(off) + k(cat))/k(on)) by following the mass change of the formation and the decay of the enzyme-substrate (ES) complex (k(on) and k(off)), and the formation of the product (k(cat)) on a 27 MHz quartz-crystal microbalance in aqueous solutions. The K(m) value was nearly equal to the K(d) value for the endo-type protease (subtilisin and alpha-chymotrypsin); however, in the case of exo-type protease (carboxypeptidase P), the K(m) value was quite different from the K(d) value, due to k(cat) > k(off).