Three-phase separation in nonionic surfactant/hydrophobically modified polymer aqueous mixtures

Three-phase separation for Triton X-114 or Triton X-100 solutions with addition of hydrophobically modified hydroxyethyl cellulose was investigated experimentally. When the surfactant concentration was high enough, the solution slightly above the cloud point could separate into three macroscopic phases: a cloudy phase in between a clear phase and a bluish, translucent phase. The rate of phase separation was very low with the formation of the clear and cloudy phases followed by the emergence of the bluish phase. The volume fraction of the cloudy phase increases linearly with the global polymer concentration, whereas the volume fraction of the bluish phase increases linearly with the global surfactant concentration. Composition analyses found that most of the polymer stayed in the cloudy phase, as opposed to most of the surfactant in the bluish phase. The interesting phase behavior can be explained by an initial associative phase separation followed by a segregative phase separation in the cloudy phase.     

LYOTROPIC LIQUID CRYSTALS IN BINARY SYSTEMS N-ALKYL GLYCOSIDES/WATER*

The formation of lyotropic mesophases (liquid crystals) in four binary systems n-alkyl glycosides/water was examined in dependence on surfactant concentration, temperature and the chain lengths (alkyl = heptyl, octyl, nonyl, decyl). The binary phase diagrams were established and the enthalpies of phase transitions were measured. The following phase transitions were detected by texture observation and calorimetry: hexagonal phase H, lamellar phase L, cubic phase Q, gel phase G and crystalline phase C. The positions of the corresponding regions of these phases in the phase diagram were determined. Sequence of phases and the localization of the phase regions were depended on the chain length of the alkyl group. So in the binary system n-decyl-β-D-glucoside/water the H-phase was not observed.     

紫外拉曼光谱研究焙烧气氛对氧化锆相变的影响

 以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程．结果表明，在有氧气氛中焙烧的氧化锆样品易转变为单斜相，而在惰性气氛中焙烧可以有效地稳定样品体相和表面的四方相结构．在缺氧气氛中焙烧的样品暴露于空气中后，表面极易转变为单斜相，而其体相仍为四方相结构，这表明四方相氧化锆在样品表面是极不稳定的．     

Ion-pair mediated transport of angiotensin, neurotensin, and their metabolites in liquid phase microextraction under acidic conditions

This paper discusses the behaviour of angiotensin 1 and neurotensin together with their metabolites in a three-phase liquid phase microextraction under acidic conditions. Variations in donor phase, organic phase, and acceptor phase are studied with extraction recovery as response variable. It is proved that for all peptides the transport across the organic phase is mediated by heptane-1-sulphonic acid. n-Octanol gave overall best results as organic phase. A donor phase volume of 1.0 mL was chosen as a compromise between optimal recovery and robustness of the LPME device. The optimal pH of the donor phase (using acceptor phase of pH 2) was found to be different for the peptides, which opens opportunities for selective sample preparation. Decreasing the acceptor phase pH to 1.0 resulted in increased extraction recoveries. On using 1.0 mL of donor phase containing 50 mM heptane-1-sulphonic acid pH 3, n-octanol as organic phase immobilized in the pores of the fibre, and 20 microL of acceptor phase containing 0.1 mol/L HCl, extraction recoveries up to 82% (enrichment factor = 41) were achieved. To our knowledge this is the first report on liquid phase microextraction of angiotensins and neurotensins.     

基于虚拟相位平面的相位展开方法

在基于相位分析的三维测量系统中,为了准确地得到物体的高度,相位展开扮演着很重要的角色。传统的相位展开方法常常需要额外的投影图,而傅里叶变换轮廓术只需要采集一幅或两幅变形条纹图就可以实现对物体轮廓的测量,其方法速度快,易于实现。针对傅里叶变换轮廓术方法计算得到的截断相位分布,本文提出了一种利用截断相位与参考平面相位差值2π的整数倍数获得截断相位的正确级次,辅助相位展开的方法。当被测物体较复杂,或者相位截断次数较多时,该方法在已有参考平面相位的基础上虚拟新的相位平面,依次比较截断相位和虚拟相位,进行多次分级相位展开,结合多个展开相位结果,最终得到正确的展开相位。该方法展开速度快,展开错误不会蔓延传递。仿真和实物实验结果证明了该方法的可行性,说明该方法可用于傅里叶变换轮廓术中进行截断相位的快速展开。     

Polymerisation in lyotropic liquid-crystalline phases of dioctadecyldimethylammonium bromide

The polymerisation of styrene in lyotropic liquid-crystalline (LC) phases of dioctadecyldimethylammonium bromide (DODAB) in water is explored. Amphiphile concentrations between 20 and 50 wt % are employed. The study is set out as a model study for polymerisation reactions in nonstabilised, nonfunctional bilayer systems. X-ray characterisation was used to assess the phase behaviour of the lyotropic mesophases before, during and after polymerisation. The DODAB/water system forms the lamellar phase within the concentration range considered. Addition of styrene to the lamellar phase of DODAB at an equimolar ratio induces a phase shift to a bicontinuous cubic phase at elevated temperatures near the phase-transition temperature. Upon polymerisation within this cubic phase, the phase structure is maintained if the system is kept at constant temperature; however, if the polymer/amphiphile phase is cooled, the lamellar phase, being typical of the DODAB/water system, is restored. It is concluded that, as a result of phase separation between the polymer and the amphiphile phase, the polymerisation in lyotropic LC phases does not provide a stable copy of the templating amphiphile phase. This is in analogy to the observations for polymerisations in other lyotropic phases. Received: 16 March 2000 Accepted: 1 July 2000     

薄膜梯度扩散技术结合相研究进展

薄膜梯度扩散(DGT)技术是一种新型原位被动采样技术,已被广泛应用于水体、土壤、沉积物中目标物的采集与测量。结合相是DGT技术的重要组成部分,决定了与目标物的结合能力、结合速度、结合容量以及目标物的形态选择性等。DGT结合相分为固态结合相和液态结合相。本文重点综述了树脂、氧化物、无机盐、活性炭、改性硅胶、分子印迹、共聚物、复合、液态等结合相在DGT技术中的应用,展望了DGT结合相的发展前景。     

On the chromatography mechanism of reversed-phase liquid chromatography

Summary An equation is derived which can describe how the retention of solutes is influenced by the composition of the mobile phase in reversed-phase liquid chromatography, the retention of solutes in alkyl bonded stationary phase regarded as the complexation between solute molecule and the active sites on the surface of the stationary phase. When the stationary phase is not fully saturated by the organic modifier, the activity of the active sites, the activity coefficient of the adsorbed solute as well as the activity coefficient of the solute in the mobile phase depend on the composition of the mobile phase. However, when the stationary phase is fully saturated, the composition of the mobile phase mainly influences the activity coefficient of the solute in the mobile phase. In addition, the selectivity of retention is discussed in terms of the derived equation.     

Crystalline behaviors and phase transition during the manufacture of fine denier PA6 fibers

Recently we have successfully produced fine denier PA6 fibers by using additives containing lanthanide compounds. Meanwhile, crystallization and phase transition of PA6 fibers during spinning and drawing processes were investigated. During the spinning process, β phase crystal could be obtained in as-spun PA6 fibers which were produced with relatively high melt draw ratio, while γ phase crystal predominated when the melt draw ratio was relatively low. β phase crystal, whose behaviors are similar with those of γ phase by FT-IR and XRD characterization, could be transformed to α form easily when PA6 fibers are immersed in boiling water. However, γ phase crystal of PA6 remains unchanged in boiling water. Thus, β and γ phase crystals of PA6 can be differentiated by the crystalline behaviors of PA6 fibers after treatment in boiling water. Further experiments demonstrate that the β phase can also be produced during a drawing process where a phase transformation from γ to α occurs. In other words, β phase may act as an intermediate state during the phase transformation.     

The pressure tunning Raman spectral studies of the bilirubinIXalpha and neutral calcium bilirubinate at high external pressure

The bilirubinIXalpha and its neutral calcium bilirubinate were studied using Raman spectroscopy at high external pressure. The results showed that the bilirubinIXalpha has two pressure-induced phase transitions (15-18 and 30-36 kbar) and three pressure phase areas. Its pressure sensitivities in the low-pressure phase are very low. It is believed that the four internally hydrogen bonds in bilirubinIXalpha molecule cause the atoms to attract each other tightly in the bilirubinIXalpha molecule. Therefore, the low pressure is not strong enough to shorten the bonds significantly. The pressure sensitivities in the middle-pressure phase are much higher than those in the low-pressure phase, but those in the high-pressure phase are slightly lower than in the middle-pressure phase. There is only one pressure-induced phase transition (25-34 kbar) in the neutral calcium bilirubinate. The pressure sensitivities in the low-pressure phase are higher than those in the high-pressure phase as usually.     

Effect of molecular weight on the polymorphic transformation of isotactic poly(1-butene)

The effect of molecular weight on the polymorphic transformation of isotactic poly(1-butene)(iPB) under room temperature had been investigated by fourier transform infrared spectroscopy(FT-IR). The phase transformation time, phase transformation rate and phase transformation time difference between phase I and phase II at a given transformation degree were used to analysis the phase transformation kinetics of iPB aging at room temperature. The results show that the reduction of phase II can occur quickly at room temperature and seem less dependent on the molecular weight. However, the molecular weight has great effect on the formation of phase I. When the phase transformation degree for phase I reach 90%, a distinct transformation time difference can be observed. In order to clearly explain the difference in the reduction of phase II and the growth of phase I, a phase transformation model from the chain conformation level for iPB with different molecular weight have been drawn. DSC analysis was used to support the proposed model.     

Emulsification liquid phase microextraction followed by on-line phase separation coupled to high performance liquid chromatography

An emulsification liquid phase microextraction followed by on-line phase separation coupled to high performance liquid chromatography (HPLC) is introduced based on a novel idea for the separation of dispersed organic phase from aqueous phase. In this method, the dispersed organic extraction phase was filtered using an in-line filter and it was separated from the water sample. The new approach is simple and, in addition to improving some limitations of the conventional emulsification liquid phase microextraction, eliminates the need for centrifugation in the phase separation step.     

Phase transfer catalytic system with the third liquid phase

Phase transfer catalysis, a technique to bring the reactants in two immiscible phases together by adding a phase transfer agent, has been employed in the production of fine chemicals and pharmaceuticals in the last few decades. The third liquid phase (catalytic phase) may be formed when phase transfer catalysts (PTC), cannot be dissolved in either organic or aqueous phase. The third phase catalytic systems have the following three advantages, that is, (1) high activity (2) repeated use and (3) separation between the organic phase and the aqueous phase. It is expected that simple new processes can be constructed by applying these three advantages.     

Extraction of glyphosate by a supported liquid membrane technique

The possible application of the supported liquid membrane (SLM) technique for the extraction of glyphosate is presented. For the extraction of this compound the SLM system has been applied with utilisation of Aliquat 336 as a cationic carrier incorporated into the membrane phase. The extraction efficiency of glyphosate [N-(phosphonomethyl)glycine] is dependent on the donor phase pH, carrier concentration in the organic phase and NaCl concentration in the acceptor phase. The optimal extraction conditions are: donor phase pH>11, acceptor phase of 2 M NaCl solution and the organic phase composed of 20% (w/w) Aliquot 336 solution in di-hexyl ether. Counter-coupled transport of chloride anions from the acceptor phase to the donor phase is a driving force of the mass transfer in this system.     

辛基三甲基溴化铵与辛基硫酸钠混合水溶液的相行为

对辛基三甲基溴化铵(OTAB)与辛基硫酸钠(SOS)正、负离子混合表面活性剂水溶液的相行为进行了研究.在高浓度的溶液中,混合表面活性剂形成液晶相,随着混合摩尔比OTAB/SOS接近于1,液晶结构由六角相转层状相,同时夹杂少量沉淀物;在中等浓度时,任意混合摩尔比例下皆为均相透明溶液;在低浓度下,在很宽的OTAB/SOS混合摩尔比的范围,出现双水相,其中的表面活性剂稀薄相,为不同大小的胶团与囊泡组成的稀溶液,另一表面活性剂富集相中则为数密度很大的囊泡聚集体,富集相对油溶性染料的增溶作用比非富集相高得多.     

Far-infrared and x-ray studies on poled semicrystalline poly(vinylidene fluoride)

Far-infrared (FIR) Fourier-transform transmission spectra and x-ray diagrams of poly(vinylidene fluoride) films are examined in terms of poling-field action on the crystalline phase (α and β forms) and on the amorphous phase. We show that the poling field induces an increase of crystallinity in the α phase as well as in the β phase, and for the latter an orientation of dipoles in the field direction. For samples containing a mixture of phases α and β we note an α to β phase transition, a rotation of the dipoles in the β phase, and an increase of the crystallinity of the sample. Part of the β phase is generated from the amorphous phase.     

Aqueous to Organic Phase Transfer of Au25 Clusters

Aqueous to organic phase transfer of water soluble sub-nanocluster, Au₂₅SG₁₈ (-SG, glutathione thiolate) is demonstrated using the phase transfer reagent, tetraoctylammonium bromide. The phase transfer occurred by the electrostatic attraction between the hydrophilic carboxylate anion of the glutathione ligand on the cluster surface in the aqueous phase and the hydrophobic tetraoctylammonium cation in the toluene phase. Detailed spectroscopic characterization of the phase transferred cluster using optical absorption, photoluminescence and X-ray photoelectron spectroscopy showed that the cluster retains its integrity during the phase transfer. The interaction of the cluster with the phase transfer reagent can be studied with infrared spectroscopy. The phase transferred cluster can be dried and redissolved in an organic medium, just as the original cluster. This is the first report of the phase transfer of a sub-nanocluster, keeping the cluster core intact. The effect of dilution and pH on phase transfer of this cluster is studied in detail. This method promises several possibilities to explore the properties, reactivity and applications of sub-nanoclusters both in the aqueous and organic phases. Dedicated to Prof. C.N.R. Rao on his 75th birthday, whose work on phase transfer of nanoparticles has inspired this work.     

Effect of oil phase transition on freeze/thaw-induced demulsification of water-in-oil emulsions

Recently, there has been an increasing interest in the breakage of water-in-oil (W/O) emulsions by the freeze/thaw method. Most of the previous works focused on the phase transition of the water droplet phase. This paper emphasizes the effect of continuous oil phase transition. A series of oils with different freezing points were used as oil phases to produce model emulsions, which were then frozen and thawed. The emulsion whose oil phase froze before the water droplet phase did (OFBW) on cooling was readily demulsified with a dewatering ratio as high as over 80%, but the emulsion whose oil phase did not freeze when the water droplet phase did (NOFBW) was relatively hard to break. The difference in demulsification performance between them resulted from the distinction between their demulsification mechanisms via the analyses of the emulsion stability, emulsion crystallization/melting behaviors, oil phase physical properties, and wettability of the frozen oil phase, etc. For the OFBW emulsion, the first-frozen oil phase was ruptured by the volume expansion of the subsequently frozen droplet phase, and meanwhile, some liquid droplet phase was drawn into the fine gaps/crevices of the frozen oil phase to bridge droplets, which were considered to be essential to the emulsion breakage, whereas for the NOFBW emulsion, the demulsification was attributed to the collision mechanism proposed in our previous work. The findings may provide some criteria for selecting a proper oil phase in the emulsion liquid membrane (ELM) process and then offer an alternative approach to recycle the oil phase for continuous operation. This work may also be useful for emulsion stability against temperature cycling.     

Grand canonical ensemble molecular dynamics simulation of water solubility in polyamide-6,6

Grand canonical ensemble molecular dynamics simulation is employed to calculate the solubility of water in polyamide-6,6. It is shown that performing two separate simulations, one in the polymeric phase and one in the gaseous phase, is sufficient to find the phase coexistence point. In this method, the chemical potential of water in the polymer phase is expanded as a first-order Taylor series in terms of pressure. Knowing the chemical potential of water in the polymer phase in terms of pressure, another simulation for water in the gaseous phase, in the grand canonical ensemble, is done in which the target chemical potential is set in terms of pressure in the gas phase. The phase coexistence point can easily be calculated from the results of these two independent simulations. Our calculated sorption isotherms and solubility coefficients of water in polyamide-6,6, over a wide range of temperatures and pressures, agree with experimental data.     

物理化学课程中相平衡理论的教学策略

针对物理化学相平衡章节体系多变、知识点繁多、相图抽象等问题提出了一套系统的教学策略。首先对相平衡中的基本概念和定律进行论述,并强调重、难点;随后对章节知识点进行总结归纳,通过表格系统罗列相图的体系、相律、应用和术语;最后提出相图解读通行方法,并结合具体例子讲解这些方法、相律以及杠杆规则如何使用。