Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ from allyl acetates, indium, and indium trichloride

Inter- and intramolecular palladium-catalyzed allyl cross-coupling reactions using allylindium generated in situ by treatment of allyl acetates with indium and indium trichloride in the presence of Pd(0) catalyst and nBuNMe(2) in DMF were successfully demonstrated. Allylindium species generated in situ by reductive transmetalation of pi-allylpalladium(II) complexes, obtained from a variety of allyl acetates in the presence of Pd(0) catalyst together with indium and indium trichloride, were found to be capable of acting as effective nucleophilic coupling partners in Pd-catalyzed cross-coupling reactions. A variety of allyl acetates such as but-1-en-3-yl acetate, crotyl acetate, and 2-methylallyl acetate afforded the corresponding allylic compounds in good yields in cross-coupling reactions. Various electrophilic cross-coupling partners such as aryl iodides and vinyl bromides and triflates participate in these reactions. Not only intermolecular but also intramolecular Pd-catalyzed cross-coupling reactions work equally well to produce the desired allylic coupling products in good yields.     

Palladium-catalyzed reactions of arylindium reagents prepared directly from aryl iodides and indium metal

Treatment of aryl iodides with indium metal in the presence of lithium chloride leads to the formation of an organoindium reagent capable of participating in cross-coupling reactions under transition-metal catalysis. Combination with aryl halides in the presence of 5 mol % Cl2Pd(dppf) furnishes biaryl compounds in good yields; similarly, reaction with acyl halides or allylic acetates/carbonates in the presence of 5-10 mol % palladium catalyst leads to arylketones and allylic substitution products, respectively, in moderate yields. The reactions are tolerant of the presence of protic solvents, and approximately 85% of the indium metal employed can be recovered by reduction of the residual indium salts with zinc(0).     

Microwave-assisted Kumada-type cross-coupling reactions of iodinated carba-closo-dodecaborate anions

The microwave-assisted Pd-catalyzed Kumada-type cross-coupling reaction of iodinated carba-closo-dodecaborate anions requires smaller amounts of Grignard reagent and catalyst and results in higher yields in much shorter reaction times in comparison to a reaction with conventional heat transfer. 12-Ph(3)P-closo-1-CB(11)H(11) was identified as the side product of the cross-coupling reactions that use [PdCl(2)(PPh(3))(2)]. The inner salt, which is the first example for a {closo-1-CB(11)} cluster with a B-P bond, was selectively synthesized via a related microwave-assisted cross-coupling protocol and characterized by NMR spectroscopy, elemental analysis, and single-crystal X-ray diffraction. In addition, the crystal structures of the tetraethyl ammonium salts of [12-Ph-closo-1-CB(11)H(11)](-), [12-(4-MeOC(6)H(4))-closo-1-CB(11)H(11)](-), and [12-(H(2)C═(Me)CC≡C)-closo-1-CB(11)H(11)](-) are described.     

Novel Kumada coupling reaction to access cyclic (2-azaallyl)stannanes. Cycloadditions of cyclic nonstabilized 2-azaallyllithium species derived from cyclic (2-azaallyl)stannanes

A Kumada cross-coupling reaction involving organomagnesium reagents and (3-methylthio-2-azaallyl)stannanes with a Ni(0) catalyst provided cyclic nonstabilized (2-azaallyl)stannanes in moderate to good yields. Primary alkyl, aryl, and allylic organomagnesium reagents can be used as the cross-coupling partner. In general, NiCl(2)dppp in toluene at room temperature provided the shortest reaction times and most consistent yields. The azomethine ylides and 2-azaallyllithium species derived from these stannanes were shown to undergo efficient [3 + 2] cycloaddition reactions to provide azabicyclo[n.2.1]alkanes as the endo cycloadducts. These cycloadducts were found to be useful as starting materials for further elaboration into aza-bridged bicyclic natural and unnatural products of biological interest. Although cyclic 2-azaallyllithium species have been generated previously, this work reports the first generation and cycloaddition of entirely nonstabilized 2-azaallyllithium species. In addition a novel extension of the Kumada coupling was developed to allow for the preparation of the cyclic (2-azaallyl)stannanes, which are precursors to the nonstabilized 2-azaallyllithium species.     

Palladium(0)-catalyzed direct cross-coupling reaction of allylic alcohols with aryl- and alkenylboronic acids

Allylic alcohols can be used directly for the palladium(0)-catalyzed allylation of aryl- and alkenylboronic acids with a wide variety of functional groups. A triphenylphosphine-ligated palladium catalyst turns out to be most effective for the cross-coupling reaction and its low loading (less than 1 mol%) leads to formation of the coupling product in high yield. The Lewis acidity of the organoboron reagents and poor leaving ability (high basicity) of the hydroxyl group are essential for the cross-coupling reaction. The reaction process is atom-economical and environmentally benign, because it needs neither preparation of allyl halides and esters nor addition of stoichiometric amounts of a base. Furthermore, allylic alcohols containing another unsaturated carbon-carbon bond undergo arylative cyclization reactions leading to cyclopentane formation.     

A one-pot sequence of Stille and Heck couplings: synthesis of various 1,3,5-hexatrienes and their subsequent 6pi-electrocyclizations

Palladium-catalyzed cross-coupling reactions of 2-bromocyclohex-1-enyl triflates 7 and 11 with a variety of alkenylstannanes occurred chemoselectively at the site of the triflate leaving group to give bromobutadienes which readily underwent Heck reactions with acrylates and styrene. Both steps could be performed in the same flask to give differentially functionalized hexatrienes in up to 88% overall yield. With simple stannanes, the same catalyst precursor could be used for both coupling steps making it possible to perform the whole sequence with only one portion of catalyst. For some of the functionally substituted stannanes, specifically adjusted catalyst systems had to be used. The 1,3,5-hexatrienes obtained were further transformed, in particular the methoxy-substituted compounds 14a-c were converted to bicyclo[4.4.0]decenones 30 (71-97%), bicyclo[4.3.0]nonenones 35 (74-93%), cyclodecynone 37a (47%), and cyclononynone 39a (15%). Thermal electrocyclizations of the other hexatrienes gave tetrahydronaphthalines 31 (60-61%), the tricyclic lactone 32 (72-75%) and decahydrophenanthrene 33 (75 %) in good yields.     

Generation of quaternary centers by reductive cross-coupling: shifting of regioselectivity in a subset of allylic alcohol-based coupling reactions

Regioselective titanium alkoxide-mediated reductive cross-coupling reactions of allylic alcohols with vinylsilanes and imines have previously been demonstrated to proceed with allylic transposition by formal metallo-[3,3]-rearrangement [thought to proceed by a sequence of: (1) directed carbometalation, and (2) syn-elimination]. While many examples have been described that support this reaction path, a collection of substrates have recently been identified that react by way of an alternative pathway, delivering a concise convergent route to coupled products bearing a quaternary center.     

Allylic ionization versus oxidative addition into vinyl C-X bonds by Pd with polyfunctional olefin templates

The chemoselectivity of activation by a (PPh3)4Pd catalyst on a series of small, olefin-based compounds that were substituted with a variety of allylic and vinylic functional groups was studied. Of particular note, the allylic acetate of 1-acetoxy-2-bromo-2-propene (7) was selectively ionized by Pd in the presence of a malonate nucleophile, while oxidative addition of the C-Br bond to Pd occurred exclusively in the presence of a boronic acid nucleophile. When the acetate nucleophile was used, no ionization of the acetate leaving group occurred at all, which was proven by the use of deuterium-labeled substrates (e.g., 11). This report demonstrates that the nucleophile interacts in some way with Pd prior to catalyst activation of the substrate. Certainly in the case of the malonate nucleophile, this is without precedent and contradicts the central dogma of how these proposed catalytic cycles operate.     

Studies on the zirconium-mediated alkyne-aldehyde coupling reactions: a facile synthesis of stereodefined allylic alcohols and (Z)-2-en-4-yn-1-ols

An improved zirconium-mediated alkyne-aldehyde cross-coupling reaction has been achieved to afford the stereodefined (Z)-allylic alcohols or 3-iodinated allylic alcohols selectively via protonolysis or iodinolysis of the corresponding five-membered oxazirconacycles. This method has also been successfully applied to the synthesis of (Z)-enynols through cross-coupling reactions of three different components involving alkyne, aldehyde, and alkynyl bromide in a one-pot procedure.     

Aldol- and Mannich-type reactions via in situ olefin migration in ionic liquid

An aldol-type and a Mannich-type reaction via the cross-coupling of aldehydes and imines with allylic alcohols catalyzed by RuCl(2)(PPh(3))(3) was developed with ionic liquid as the solvent. The solvent/catalyst system could be reused for at least five times with no loss of reactivity.     

Preparation and characterization of Cu supported on 2-(1H-benzo[d]imidazol-2-yl)aniline-functionalized Fe3O4 nanoparticles as a novel magnetic catalyst for Ullmann and Suzuki cross-coupling reactions

Copper supported on 2-(1H-benzo[d]imidazol-2-yl)aniline (BIA)-functionalized Fe₃O₄ nanoparticles (Cu-BIA-Si-Fe₃O₄) as a novel magnetic catalyst was designed and used for the synthesis of new products via Ullmann and Suzuki cross-coupling reactions. The Ullmann reaction was performed by mixing arylboronic acid with aniline derivatives in dimethylsulfoxide solvent. Also, diaryls were synthesized via Suzuki C–C reactions between aryl halides and phenylboronic acid in the same solvent. The prepared materials and catalyst were characterized with various analytical techniques. The Cu-BIA-Si-Fe₃O₄ catalyst demonstrated catalytic efficiency with good to excellent yields for both types of reactions in comparison with commercial palladium catalysts. Also, the catalyst could be recovered by a simple filtration and retained its activity even after several cycles.     

Reductive cross-coupling of 3-substituted delta 3-cephems with alkenyl halides in an Al/PbBr2/NiBr2(bpy) triplemetal redox system. Synthesis of 3-alkenyl-delta 3-cephems.

Synthesis of 3-alkenyl-delta 3-cephems was performed successfully by cross-coupling 3-(trifluoromethylsulfonyloxy or chloro)-delta 3-cephem with alkenyl halides, e.g., vinyl bromide, trans-1-bromo-1-propene, and trans-beta-bromostyrene in an Al/cat.PbBr2/cat.NiBr2(bpy)/NMP (or DMF) system. Reduction of 3-(trifluoromethylsulfonyloxy)-delta 3-cephem into norcephalosporin was also achieved by a similar reaction in the presence of 5 molar equiv of water. Scope and a plausible mechanism of the Al/Pb/Ni triplemetal-redox promoted reactions are discussed.     

Palladium(0) deposited on PAMAM dendrimers as a catalyst for C-C cross coupling reactions

PAMAM dendrimers of generations G2-G3 as well as a partially substituted derivative of generation G4 and a low-molecular-weight tricyclic ligand 4 were used to bind Pd(0) nanoparticles. The obtained adducts were tested as catalysts for C-C cross-coupling reactions, such as the Suzuki-Miyaura, Hiyama, Heck and Sonogashira reaction. The highest yields of the coupling product, diphenylacetylene, were obtained with all the catalysts studied in the Sonogashira coupling performed in ethanol with K?CO? as base. Very good results, 85-100%, were also found in the Suzuki-Miyaura cross-coupling, while the efficiency of the Hiyama coupling appeared lower, with 38-52% of 2-methylbiphenyl formed. In all reactions, the G2-Pd(0) catalyst, containing an unmodified dendrimer, afforded the highest yields of the cross-coupling products.     

Synthesis of unsaturated organoselenium compounds via the reaction of organic diselenides with 2,3-dichloro-1-propene in the hydrazine hydrate-KOH system

Dimethyldiselenide reacts with 2,3-dichloro-1-propene at 20–25°C in the hydrazine hydrate-KOH medium to form 2-chloro-3-methylselanyl-1-propene with 90% yield. Diphenyldiselenide in the reaction with 2,3-dichloro-1-propene, depending on the conditions, can give quite selectively four products: 2-chloro-3-phenylselanyl-1-propene, phenylselanylpropadiene, 1-phenylselanyl-1-propyne, and Z-1,2-bis(phenylselanyl)-1-propene. The effect of the selenium atom on the reaction direction and the products structure is discussed.     

An improved Cu-based catalyst system for the reactions of alcohols with aryl halides

The use of 3,4,7,8-tetramethyl-1,10-phenanthroline (Me(4)Phen) as a ligand improves the Cu-catalyzed cross-coupling reactions of aryl iodides and bromides with primary and secondary aliphatic, benzylic, allylic, and propargylic alcohols. Most importantly, by employing this catalyst system, the need to use an excessive quantity of the alcohol coupling partner is alleviated. The relatively mild conditions, short reaction times, and moderately low catalyst loading allow for a wide array of functional groups to be tolerated on both the electrophilic and nucleophilic coupling partners.     

Immobilization of copper in organic-inorganic hybrid materials: a highly efficient and reusable catalyst for the Ullmann diaryl etherification

The immobilization of copper in organic-inorganic hybrid materials catalyzing the Ullmann reaction has been described. Phenols reacted with aryl iodides, aryl bromides and aryl chlorides smoothly in the presence of a 3-(2-aminoethylamino)propyl functionalized silica gel immobilized copper catalyst. The protocol involved the use of DMSO as the solvent, and potassium fluoride as the base. The reactions generated the corresponding cross-coupling products in good to excellent yields. Furthermore, the silica-supported copper could be recovered and recycled by a simple filtration of the reaction solution and used for 10 consecutive trials without loss of its reactivity.     

Synthesis of 2-bromo-1-aryl-1H-indenes via a Ag(I) promoted domino 2π-electrocyclic ring-opening/4π-electrocyclization reaction of 1,2-diaryl substituted gem-dibromocyclopropanes

2-Bromo-1-aryl substituted indenes can be synthesized from 1,2-diaryl substituted gem-dibromocyclopropanes via a domino reaction sequence. The cascade reaction involves silver(I) promoted ionization and 2π-disrotatory electrocyclic ring-opening, followed by a 4π-conrotatory electrocyclic ring closing reaction of the allylic carbocation intermediate. Reaction conditions utilize silver tetrafluoroborate (AgBF₄) in dichloroethane at 65 °C. Selectivity effects for the electrocyclization were also studied. The 2-bromoindenes can be further functionalized using cross-coupling reactions, such as the Suzuki–Miyaura protocol. The alkene π-bond of the indenes can also be isomerized to give the thermodynamically more stable 2-bromo-3-aryl-1H-indene isomers using triethylamine in dichloromethane at room temperature.     

果胶负载钯催化剂的制备及Suzuki反应催化性能

以柑橘皮果胶为载体,采用吸附法制备了果胶负载钯催化剂,并将其应用于四苯硼钠与溴代芳烃的交叉偶联反应中.该反应体系以聚乙二醇400(PEG 400)/H2O为反应溶剂,三乙胺为碱,在空气中于110℃反应15~60 min,四苯硼钠中4个苯基均可顺利参与反应,高产率地获得相应的目标化合物.该方法具有条件温和、反应时间短、收率高且催化剂可循环利用等优点.     

New hybrid ligands with a trans-1,2-diaminocyclohexane backbone: competing chelation modes in palladium-catalyzed enantioselective allylic alkylation

Three new hybrid ligands with trans-1,2-diaminocyclohexane backbone have been synthesized from (1R,2R)-2-aminocyclohexylcarbamic acid tert-butyl ester (4), which is prepared through an indirect monoprotection of the diamine. The ligands are (1R, 2R)-N-2-[2-(dimethylamino)benzoyl]aminocyclohexyl-2-(diphenylphosph anyl)benzamide and its di-n-butylamino- and diphenylamino-derivatives (3a-c), which belong to formal P,N-type chelates with possible wide bite angles in the metal chelation. To evaluate the new hybrid ligands against well-known P,N- and P, P-chelates (1 and 2), they were employed in the palladium-catalyzed allylic alkylations between two standard racemic allylic acetates, 2-acetoxy-1,3-diphenyl-2-propene (14a) and 2-acetoxy-1, 3-dimethyl-2-propene (14b), and dimethyl malonate under different reaction conditions. The catalytic system with the new ligands showed good reactivity toward both the substrates with moderate enantioselectivities (up to 78% ee toward 14a and 80% ee toward 14b). Of particular note, dramatic changes in the sense and in the degree of the enantioselectivity were observed depending on the ligands and reaction conditions, which suggested a different chelation mode was competing with the supposed P,N-chelation mode. An X-ray crystal structure of a chelated palladium complex [Pd(3c)(eta(3)-PhCHCHCHPh)]PF(6) was obtained, which showed a P, O-chelation mode in which a carboxamide oxygen acted as the O-ligand. This is the first example of the enantioselective palladium-catalyzed allylic alkylation in which a P,O-chelated complex of a carboxamide group participated as the ligand group.     

Reversible inhibition/activation of olefin metathesis: a kinetic investigation of ROMP and RCM reactions with Grubbs' catalyst

The metathesis activity of Grubbs' catalyst 1 was investigated in the presence of N-donor ligands (1-methylimidazole [MIM], 4-(N,N-dimethylamino)pyridine [DMAP], pyridine, and 1-octylimidazole [OIM]). Ring opening metathesis polymerization (ROMP) reactions of cyclooctene (COE), bulk-ROMP reactions of COE and norbornadiene (NBD), and ring closing metathesis (RCM) reactions of diethyl diallylmalonate (DEDAM) were conducted containing various equivalents of N-donor with respect to catalyst. ROMP reactions could be stopped using MIM (1-5 equiv) and DMAP (2-5 equiv), and slowed with pyridine (1-5 equiv) by factors >100, in benzene solution for 24 h. The stopped reactions could be initiated with excess phosphoric acid (H3PO4), and the reactions proceeded faster than with uninhibited Grubbs' catalyst in the first 4 min after reactivation. Thereafter, the reaction proceeded at the same rate as the reaction with the uninhibited catalyst. ROMP reactions in neat COE and NBD could be inhibited for 72 h using 2 equiv of MIM, DMAP, or OIM and activated with H3PO4 to give polymer gels within minutes or less. RCM reactions could be completely inhibited with MIM (1-5 equiv), but upon treatment with H3PO4, the reaction would proceed at a fraction of the initial rate accomplished by uninhibited Grubbs' catalyst 1. A structural investigation of the inhibited species showed that MIM and DMAP completely or partially transform catalyst 1 into the hexacoordinate species 5a or 5b producing free PCy3, which additionally acts as an inhibitor for the ROMP reaction. Upon reactivation, the PCy3 is protonated along the N-donor ligand; however, over the period of 5 min, the phosphine has been found to coordinate back to the ruthenium catalyst. Therefore, the reaction slows to the same polymerization rate as the reaction using the uninhibited catalyst at this point. Complexes 5a and 5b were isolated, characterized, and employed in ROMP and RCM experiments where they exhibited very low catalytic activity.