Microsphere resin chromatography combined with microbial biotransformation for the separation and purification of salvianolic acid B in aqueous extract of roots of Salvia multiorrihza Bunge

Salvianolic acid B was separated and purified from Salvia miltiorrhiza Bunge (danshen) by microbial transformation together with chromatography of microsphere resin. The aqueous extract of danshen was transformed by Fusarium graminearum in a bioreactor containing phosphate buffer (PBS), in which rosmarinic acid was transformed into danshensu and caffeic acid and the yield of salvianolic acid B was higher than 85%. After biotransformation, salvianolic acid B was purified by microsphere resin. A parallel test for making a comparison of microsphere resin chromatography between elution by methanol water solution and water was done. The purity of salvianolic acid B was up to 95% at the yield of 62% when impurities and salvianolic acid B were eluted by 45% and 55% methanol solution respectively. The purity of salvianolic acid B was up to 99% at the yield of 90% when distilled water was used to elute the impurities and salvianolic acid B. The total yield of salvianolic acid B was up to 75% at the purity over 99% while biotransformation combined with microsphere resin chromatography by water elution. Microbial biotransformation together with water elution of microsphere resin supplied an efficient method to eliminate the micromolecular impurities and a possible method to purify water-soluble compounds in traditional Chinese medicine.     

PS-IIDQ: a supported coupling reagent for efficient and general amide bond formation

Polystyrene-IIDQ, a polymer-supported coupling reagent, was synthesized in three steps from Merrifield resin in 86% overall conversion. This reagent efficiently coupled carboxylic acids to amines in good yields and high purities, required no pre-activation step, and was tolerant of the order of reagent addition. PS-IIDQ was observed to be more efficient than polymer-supported carbodiimides (PS-EDC and PS-DCC) and gave higher yields than HATU for general amide bond formation, including the coupling of anilines and hindered substrates. When evaluated with five carboxylic acids and nine amines (including anilines and secondary amines) PS-IIDQ gave an average isolated yield of 73%.     

Separation of salvianic acid A from the fermentation broth of engineered Escherichia coli using macroporous resins

Salvianic acid A (also known as danshensu) is a plant‐derived polyphenolic acid, and has a variety of physiological and pharmacological activities. Our laboratory previously constructed an unprecedented artificial biosynthetic pathway in Escherichia coli and established the fermentation process to produce salvianic acid A. Here, we developed an efficient method for separating salvianic acid A from the fermentation broth of engineered Escherichia coli by macroporous resins. Among ten tested macroporous resins, the static and dynamic adsorption/desorption experiments demonstrated that X5 resin was the best to separate salvianic acid A from fermentation broth. Other parameters during static and dynamic procedures were also investigated. Under the optimum separation conditions, the average adsorption capacity of SAA were 10.66±0.54 mg/g dry resin and the desorption ratio was 85.6±4.1%. The purity and recovery yield of salvianic acid A in the final dry product were 90.2±1.5 and 81.5±2.3%, respectively. The results show that adsorption separation with macroporous resin X5 was an efficient method to prepare salvianic acid A from fermentation broth. This work will benefit the development and application of plant‐derived salvianic acid A and its derivatives.     

双酚芴双胺型苯并嗯嗪树脂的合成、结构及热性能

以9-芴酮、苯酚为原料,以质量分数为98%的浓硫酸为催化剂,2-巯基丙酸为助催化剂,合成了双酚芴[9,9-双(4-羟苯基)芴],再用其与乙二胺和多聚甲醛反应,合成了线性双酚芴双胺型苯并噁嗪树脂(BF-eda树脂).采用FTIR,'H NME和<'13>C NMR等分析手段对双酚芴和BF-eda树脂的化学结构进行了表征;...     

Solid-phase synthesis of 7-acylamino-1,4-benzodiazepine-2,5-diones

A method for the synthesis of polymer-bound 7-acylamino-benzodiazepine-2,5-diones is described. The amino group of an alpha-amino acid is linked to polystyrene or TentaGel resin via reductive amination of polymer-bound 4-alkoxy-2,6-dimethoxybenzaldehyde. Acylation with unprotected 5-nitroanthranilic acid is followed by base-catalyzed ring closure. Reduction of the nitro group yields enantiomerically pure 7-aminobenzodiazepin-2,5-dione attached via the N-4 atom to the resin. Acylation of the amino group on the aromatic ring with acid chlorides in N-methylpyrrolidone (no DMF, no base!) followed by cleavage from the resin using TFA/Me(2)S/water (90:5:5) provides the acylated benzodiazepinones in 52-69% (PS resin) and 41-48% (TG resin) yield (based on the theoretical loading) and >70% purity (HPLC, 210 nm). Using Fmoc-protected tyrosine fluoride in NMP gives the amino acid-coupled benzodiazepinones in 24% (PS resin) and 31% (TG resin) yield.     

Preparation and Thermal Investigation of Renewable Resource Based Terpolymer Bearing Furan Rings as Pendant Groups

Condensation of renewable resources based monomer 2-formylfuran (FF), vanillin (V) and 4-hydroxyacetophenone (HA) at 80°C by polycondensation in the presence of alkaline conditions (potassium hydroxide) gives an amorphous polymer resin in 85% yield. The structure of terpolymer was elucidated by FT-IR, ¹H-NMR and Pyrolysis GC-MS technique. The number average and weight average molecular weight and polydispersity index of the terpolymer were found to be 5,595 and 8,504 g/mol and 1.52, respectively by gel permeation chromatography (GPC). The phase transition temperature was determined by differential scanning calorimetry (DSC). Apparent activation energies of the thermal decomposition of terpolymer were determined using isoconversional Flynn-Wall-Ozawa (FWO) method. The type of solid-state mechanism has been established by Craido method is proposed to be D₃ (three-dimensional diffusion). The terpolymer strongly inhibited the growth of a wide variety of microorganisms, including gram-positive bacteria, gram-negative and fungi. This newly developed terpolymer furan resin may be an exciting intermediates material for the construction of 3D-designed structural products.     

Dispersive mixing and intraparticle partitioning of protein in size-exclusion chromatographic refolding

Refolding enables bioprocesses predicated on proteins expressed as inclusion bodies in Escherichia coli. Optimization of size-exclusion chromatography (SEC) refolding is a significant challenge because a wide range of factors, including the choice of gel media, the column dimensions and configuration, affect the final yield in a protein-specific manner. In this study, we investigated these factors by relating them to dispersive mixing and partitioning of refolding molecules within the SEC pore structure. Lysozyme was refolded using SEC resins giving different column dispersion and chromatography resolution. Despite a low separation resolution, the desalting SEC resin Sephadex G-25 resulted in a refolding yield that was 12-30% higher than those obtained with Superdex 75 and Superdex 200. This finding supported the notion that SEC refolding was enhanced by dispersive mixing, which was increased by a wide particle size distribution of the Sephadex G-25 used. Column dispersion was further improved by strategically placing an inlet gap before the packed resin beds, leading to a 20% increase in refolding yield. Refolding yield in Superdex 75 was 20% higher than that in Superdex 200 under conditions giving similar dispersive mixing. This yield enhancement is expected to be protein-specific since Superdex 75 was chosen to specifically maximize partitioning of lysozyme molecules within the resin particles, reducing the likelihood of aggregation during refolding. The highest refolding yield (65%) was achieved using a Sephadex G-25 column with a 15 mm inlet gap, suggesting that desalting systems optimized for dispersive mixing might be an economical and generic alternative for preparative SEC protein refolding.     

Trimethylsilyl-directed 1,3-dipolar cycloaddition reactions in the solid-phase synthesis of 1,2,3-triazoles

[reaction: see text] A regioselective method for the preparation of 1,5-trisubstituted 1H-1,2,3-triazoles via a 1,3-dipolar cycloaddition of 1-trimethylsilylacetylenes with organoazides is described. Immobilization of the azide on REM resin and subsequent cycloaddition afforded a 2 x 2 x 4 x 3 membered 1,5-disubstituted 1H-1,2,3-triazole library with an average purified yield of 68%.     

Separation of isorhamnetin 3‐sulphate and astragalin from Flaveria bidentis (L.) Kuntze using macroporous resin and followed by high‐speed countercurrent chromatography

D4020 resin offered the best dynamic adsorption and desorption capacity for total flavonoids based on the research results from ten kinds of macroporous resin. A column packed with D4020 resin was used to optimize the separation of total flavonoids from Flaveria bidentis (L.) Kuntze extracts. The content of flavonoids in the product was increased from 4.3 to 30.1% with a recovery yield of 90%. After the treatment with gradient elution on D4020 resin, the contents of isorhamnetin 3‐sulfate and astragalin were increased from 0.49 to 8.70% with a recovery yield of 74.1% and 1.16 to 30.8%, with a recovery yield of 92.2%, respectively. Further purification was carried out by one‐run high‐speed countercurrent chromatography yielding 4.5 mg of isorhamnetin 3‐sulfate at a high purity of 96.48% and yielding 24.4 mg of astragalin at a high purity of over 98.46%.     

柱色谱分离蔗糖酰化产物中蔗糖-6-乙酸酯的研究

通过蔗糖C-6位羟基的选择性乙酰化反应,合成的蔗糖-6-乙酸酯是进一步制备卤代蔗糖衍生物的重要中间体[1]。三氯蔗糖是目前被广泛关注的一种新型卤代蔗糖衍生物[2],它是以天然的蔗糖为原料,经半化学合成而得到的强力甜味剂,具有高甜度、低热值、无毒和抗龋齿等特点。在众多的三氯蔗糖的合成方法中[3-5],必须首先要对活泼的蔗糖C-6位羟基进行保护,即蔗糖的选择性酰化反应。蔗糖的乙酰化产物中除蔗糖-6-乙酸酯外,还有未转化的原料蔗糖和部分反应副产物。因此,为了减轻后续工艺合成的难度,降低制备成本,使最终产物三氯蔗糖容易提纯,必须对酰化…     

Experimental study on liquid fire behavior at different effective ceiling heights in a full-size simulated cargo compartment

A phosphorus-containing maleimide flame retardant (BDMP) was synthesized via the addition reaction between 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide and N,N′-bismaleimide-4,4′-diphenylmethane. The structure of BDMP was characterized by Fourier-transform infrared spectroscopy (FTIR), ¹H and ³¹P nuclear magnetic resonance and elemental analysis. The thermal, flame-retardant and mechanical properties of the flame-retardant cyanate ester system were investigated by thermogravimetric analysis (TG), limiting oxygen index (LOI), vertical burning (UL-94), cone calorimeter test and dynamic mechanical analysis. The TG results indicated that the initial decomposition of modified CE resin shifted from 416 to 363 °C, and on the contrary, the char yield increased from 38.8 to 44.5%. The results of combustion tests indicated that the CE with highest phosphorus content acquired LOI value of 37% and achieved a UL-94 V-0 rating. The peak heat release rate, average heat release rate and average of effective heat combustion (av-EHC) of that group decreased by 39.5, 31.2 and 41.8%, respectively. In addition, the increase in phosphorus content led to a decrease in av-EHC and average CO₂ yield, and an increase in average CO yield, indicating that BDMP led to an incomplete combustion of the modified CE system. The flame-retardant mechanism was investigated by TG–FTIR, scanning electron microscope and cone calorimeter. Last but not least, the dielectric constant of modified CE system showed a slight fluctuation from 2.96 to 3.02 at 1 GHz, which was lower than that of neat CE.     

Orthogonal test design for optimisation of extraction of trans-resveratrol from Pinot Noir-grape pomace

Yield of trans-resveratrol from Pinot Noir-grape pomace obtained by microwave-assisted extraction (MAE) through an orthogonal experiment (16 (4(4))) was investigated to get the best extraction conditions. In this method, the highest yield was obtained when the extraction solvent used ethanol; the ratio of raw material to solvent, the extraction time, the extraction temperature and microwave irradiation power were 1:20 (g mL(-1)), 30 min, 55°C and 1.0 kW, respectively. The average yield of trans-resveratrol was 90.87%, and the recovery was in the range of 85.49-89.04% with relative standard deviation lower than 1.39%. Then, the extract of MAE was separated by NKA-9 macroporous resin and re-crystallisation. Finally, the purity of trans-resveratrol was 97.47%.     

离子液体中树脂催化转化果糖为5-羟甲基糠醛

开发了以离子液体1-丁基-3-甲基咪唑氯盐([BMIM]Cl)为溶剂, 固体酸离子交换树脂NKC-9为催化剂转化果糖为5-羟甲基糠醛的绿色工艺. 在此催化体系中, 100 ℃下反应10 min时5-HMF的产率达到78.0%, 其反应时间远远小于已有文献报道的长达数小时的反应时间. 在此催化体系中, 果糖起始浓度的增加对5-HMF产率影响不大, 因而此工艺同样适用于处理高浓度的果糖溶液. 离子液体[BMIM]Cl和树脂组成的催化体系可以循环使用, 经过9次重复使用后仍能保持稳定的催化活性.     

氧化硅组装纳米Nafion酸催化合成α-生育酚

以自制的Nafion溶液、正硅酸乙酯为原料，通过溶胶-凝胶方法，将Nafion纳 米颗粒分散组装到多孔性SiO_2中，制得高比表面积纳米复合物Nafion/SiO_2固体 酸催化剂大大提高了Nafion所含酸性中心的暴露率和可接近程度。在非极性溶剂正 庚烷和甲苯中，13% Nafion/SiO_2固体酸对α-生育酚的合成具有很好的选择催化 作用。相对于致密性Nafion树脂而言，13% Nafion/SiO_2纳米复合物单位酸中惊扰 催化活性增加了10倍。     

Propargyl silicon‐cyclopentadiene oligomeric resin with high temperature resistance

Multiple propargyl substituted cyclopentadiene was synthesized by phase transfer reaction between cyclopentadiene and propargyl bromide in an aqueous solution mediated by sodium hydroxide. It was found that propargylated cyclopentadiene (PCp) could be thermally cured with a mass loss of ca 28%, while the cured material showed a high char yield of ca 76% at 900°C. In order to overcome the processing problems of PCp, a condensation reaction between PCp di‐anion and dimethyldichlorosilane was performed to make a silicon‐PCp (SiPCp) oligomeric resin. SiPCp resin has an acceptable processability, attributed to its organosolubility, low viscosity, and broad processing window. SiPCp resin can readily undergo thermal cure via addition polymerization of ethynyl groups in the temperature range of 170–270°C with an exothermic maximum at ca 240°C, and the mass loss upon cure was less than 5%. Evidenced by the results of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) in a nitrogen atmosphere, the cured SiPCp resin exhibited stable thermo‐mechanical properties up to 320°C, and possessed an anerobic char yield of ca 77% at 900°C. The results of TGA in air atmosphere revealed the higher oxidation resistance of SiPCp resin. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

Solid-phase synthesis of hydroxysteroid derivatives using the diethylsilyloxy linker

Four different types of hydroxysteroids (primary alcohol, secondary alcohols, and phenol), bearing either an oxirane or an azide as a precursor of molecular diversity, were linked in good yields to solid support using the butyldiethylsilane polystyrene (PS-DES) resin. These molecules were then used as scaffolds to generate hydroxysteroid derivatives containing two levels of diversity. The proposed libraries were tested by running steroidal alcohols through a model sequence of reactions (solid-phase coupling, aminolysis of oxirane or reduction of azide, amidation, and final cleavage). As a result, two linked secondary alcohols (17beta-hydroxy-spiro-3(R)-oxirane-5alpha-androstane and 3beta-hydroxy-spiro- 17(S)-oxirane-5alpha-androstane) and a primary alcohol (spiro-17(S)-oxirane-3-(hydroxymethyl)-1,3,5(10)-estratriene) afforded good overall yields (>45%) and high HPLC purities (>90%) of hydroxysteroids derivatized as alkylamides without purification. One limitation was noted for the fourth library: the phenolic steroid linked by the diethylsilyloxy linker gave a poor overall yield of 8% of the desired model compound. Finally, the diethylsilyloxy linker was used successfully for a rapid solid-phase synthesis of a model library of twenty C19-steroid derivatives (3beta-amido-3alpha-hydroxy-5alpha-androstane-17-ones), with an average yield of 53% and average HPLC purity of 97% without purification steps.     

Continuous matrix assisted refolding of alpha-lactalbumin by ion exchange chromatography with recycling of aggregates combined with ultradiafiltration

Continuous matrix assisted refolding (MAR) can be achieved on a solid support by using a continuous chromatographic system. Recycling the aggregate fraction, simultaneously formed during a refolding reaction, can further increase the refolding yield. Due to the nature of this reaction, aggregates are the main reason for a refolding yield below stoichiometric conversion. A preparative continuous annular chromatographic system (P-CAC) equipped with an ion exchange resin was used to continuously refold the model protein alpha-lactalbumin. For this purpose, this protein was denatured, reduced and adsorbed on the ion exchange resin. Elution was performed with or without redox reagents in the buffer system permitting fast formation of the native disulfide bonds. In the case redox reagents were present, the protein refolds then during its residence time on the matrix. However, aggregate formation is also increased and refolding yields are lower. Tightly bound aggregates were removed from the column by 2M guanidinium hydrochloride. In order to increase the system yield, this aggregate fraction was recycled after lowering the conductivity by ultradiafiltration and adjustment of the protein concentration by dilution. For on-column refolding, recycling of aggregates at a recycling rate of 0.17 increased the system yield from 25% to 30%. An algorithm was developed to show interdependencies of the single influencing parameters. The operability of the system was demonstrated but limitations due to instability of the P-CAC, especially inhomogeneous flow and peak wobbling, have to be considered.     

Simple and efficient synthesis of 3,4-dihydro-2-pyridones via novel solid-supported aza-annulation

A diverse array of 3,4-dihydro-2-pyridones 13 were produced utilizing the unique properties of solid-supported reactions to both drive the reactions to completion and isolate the desired products. The pyridones were synthesized in high purity by a simple sequence of novel steps commencing from an acetophenone-functionalized resin. The para-substituted acetophenone 9 could be anchored to the resin through either a sulfonamide or a carboxamide linkage. The sulfonamide resin 9a, which gave the best results, was treated with several aryl aldehydes and ethoxide to give a variety of chalcones 10a-k in excellent yield (82-99%) upon TFA cleavage. Addition of either methyl or allyl malonate and DBU to 10a-k afforded smoothly the Michael adducts 11a-j (70-99%) which were subsequently cyclized in one step employing acetic acid as a catalyst and several diverse amines to give pure 3,4-dihydro-2-pyridones 13a-p in moderate to excellent yields (30-98%).     

Gel-phase 19F NMR spectral quality for resins commonly used in solid-phase organic synthesis; a study of peptide solid-phase glycosylations

The spectroscopic properties for seven different commercial resins used in solid-phase synthesis were investigated with (19)F NMR spectroscopy. A fluorine-labeled dipeptide was synthesized on each resin, and the resolution of the (19)F resonances in CDCl(3), DMSO-d(6), benzene-d(6) and CD(3)OD were measured with a conventional NMR spectrometer, i.e. without using magic angle spinning. In general, resins containing poly(ethylene glycol) chains (ArgoGel, TentaGel and PEGA) were found to be favorable for the (19)F NMR spectral quality. Three serine containing tri-, penta-, and heptapeptides were then prepared on an ArgoGel resin functionalized with a fluorine-labeled linker. The resin bound peptides were glycosylated utilizing a thiogalactoside glycosyl donor carrying fluorine-labeled protective groups. Monitoring of the glycosylations with gel-phase (19)F NMR spectroscopy allowed each glycopeptide to be formed in similar 80% yield, using a minimal amount of glycosyl donor (3 x 2 equivalents). In addition, it was found that the glycosylation yields were independent of peptide length.