首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Primary aromatic amides were prepared by a palladium-catalyzed aminocarbonylation reaction of aryl halides in high yields (70-90%) using formamide as the amine source. The reactions require a palladium catalyst in combination with a nucleophilic Lewis base such as imidazole or 4-(dimethylamino)pyridine (DMAP). Aryl, heteroaryl, and vinyl bromides and chlorides were converted to the primary amides under mild conditions (5 bar, 120 degrees C) using 1 mol % of a palladium-phosphine complex. Best results were obtained in dioxane using triphenylphosphine as the ligand and DMAP as the base. For activated aryl bromides, a phosphine-to-palladium ratio of 2:1 was sufficient, but less reactive aryl bromides or aryl chlorides required ligand-to-palladium ratios up to 8:1 in order to stabilize the catalyst and achieve full conversion. The influence of catalyst, base, solvent, pressure, and temperature was studied in detail. The mechanism of the reaction could be clarified by isolating and identifying the reaction intermediates. In addition, methylamides and dimethylamides were prepared by the same method using N-methylformamide and N,N-dimethylformamide as the amine source.  相似文献   

2.
Two procedures for the alpha-arylation of carbonyl compounds under conditions that are more neutral than those of reactions of aryl halides with alkali metal enolates are reported. The first procedure rests upon the development of catalysts bearing the hindered pentaphenylferrocenyl di-tert-butylphosphine (Q-phos) and the highly reactive dimeric Pd(I) complex {P(t-Bu)3]PdBr}2. By this procedure, zinc enolates prepared from alpha-bromo esters and amides react with aryl halides to form alpha-aryl esters and amides in high yields under mild conditions with 1-2 mol % catalyst and with remarkable functional group tolerance. By the second procedure, silyl ketene and silyl ketimine acetals react with aryl bromides in the presence of substoichiometric zinc fluoride, 1 mol % Pd(dba)2, and 2 mol % P(t-Bu)3 in DMF solvent at 80 degrees C. Reactions of zinc tert-butyl acetate and propionate enolates and trimethylsilyl ketene acetals of tert-butyl propionate and methyl isobutyrate with aryl bromides bearing electron-donating and potentially reactive, base-sensitive electron-withdrawing groups and with pyridyl bromides are reported. In addition, the diastereoselective coupling of phenyl bromide with an imide enolate bearing the Evans auxiliary is reported, and this study shows that racemization of base-sensitive stereocenters does not occur during the coupling process under these more neutral conditions.  相似文献   

3.
An electrochemical four‐component reaction cascade Mumm rearrangement was developed. It is a rare example of in situ generation of O‐acyl isoamides for 1,3‐(O→N) acyl transfer. Inexpensive, commercially available arylethylenes, aryl or heterocyclic acids, acetonitrile, and alcohols were used as substrates. A wide range of aryl acids and alcohols were tolerated and provided imides in satisfactory yields. Subsequent hydrolysis of imides could be utilized to synthesize valuable amides and β‐amino alcohol derivatives.  相似文献   

4.
An electrochemical four-component reaction cascade Mumm rearrangement was developed. It is a rare example of in situ generation of O-acyl isoamides for 1,3-(O→N) acyl transfer. Inexpensive, commercially available arylethylenes, aryl or heterocyclic acids, acetonitrile, and alcohols were used as substrates. A wide range of aryl acids and alcohols were tolerated and provided imides in satisfactory yields. Subsequent hydrolysis of imides could be utilized to synthesize valuable amides and β-amino alcohol derivatives.  相似文献   

5.
A single method (2% Pd(2)(dba)(3)/8% PCyp(3)/NMI in THF/NMP at 80 degrees C; Cyp = cyclopentyl) achieves the cross-coupling of a range of beta-hydrogen-containing primary alkyl iodides, bromides, chlorides, and tosylates with an array of alkyl-, alkenyl-, and arylzinc halides. The process is compatible with a variety of functional groups, including esters, amides, imides, nitriles, and heterocycles.  相似文献   

6.
以羟基磷灰石(HAP)负载Mn作为催化剂(MnHAP)催化溴苯与苯硼酸的Suzuki交叉偶联反应.以氟离子交换羟基磷灰石的羟基(MnFAP)后,催化剂的活性显著提高,在优化的反应条件下能得到约70%的产率.进一步考察了溶剂和不同取代基的影响.结果表明,MnFAP作用下溶剂极性对反应有很大影响,当溶剂DMF/H2O比例为1/3时产率最高.对于不同取代基取代的溴代芳烃或苯硼酸,可以得到中等产率(18%~46%)的偶联产物.  相似文献   

7.
Mowery ME  DeShong P 《Organic letters》1999,1(13):2137-2140
[formula: see text] The scope of the palladium-catalyzed cross coupling reaction of aryl halides with phenyltrimethoxysilane has been expanded to include aryl bromides, heteroaryl bromides, and aryl chlorides. A more general Pd(0)-catalyst/ligand system has been developed to activate bromides: palladium(II) acetate (Pd(OAc)2) is activated with triphenylphosphine (PPh3) or tri-o-tolylphosphine (P(o-tol)3) (1:2 molar ratio of Pd:phosphine). Coupling of aryl chloride derivatives required addition of 2-(dicyclohexylphosphino)biphenyl (Buchwald's ligand) to Pd2dba3 (tris-(dibenzylideneacetone)dipalladium(0)) (1:1.5 molar ratio of Pd:phosphine).  相似文献   

8.
The intermolecular alpha-arylation and vinylation of amides by palladium-catalyzed coupling of aryl bromides and vinyl bromides with zinc enolates of amides is reported. Reactions of three different types of zinc enolates have been developed. The reactions of aryl halides occur in high yields with isolated Reformatsky reagents generated from alpha-bromo amides, with Reformatsky reagents generated in situ from alpha-bromo amides, and with zinc enolates generated by quenching lithium enolates of amides with zinc chloride. This use of zinc enolates, instead of alkali metal enolates, greatly expands the scope of amide arylation. The reactions occur at room temperature or 70 degrees C with bromoarenes containing cyano, nitro, ester, keto, fluoro, hydroxyl, or amino functionality and with bromopyridines. Moreover, the reaction has been developed with morpholine amides, the products of which are precursors to ketones and aldehydes. The arylation of zinc enolates of amides was conducted with catalysts bearing the hindered pentaphenylferrocenyl di-tert-butylphosphine (Q-phos) or the highly reactive, dimeric, Pd(I) complex [[P(t-Bu)3]PdBr]2.  相似文献   

9.
The treatment of various N‐morpholino amides with TMPZnCl⋅LiCl (TMP=2,2,6,6‐tetramethylpiperidyl) and Mg(OPiv)2 in THF at 25 °C provides solid zinc enolates with enhanced air and moisture stability (t 1/2 in air: 1–3 h) after solvent evaporation. These enolates undergo Pd‐ and Cu‐catalyzed cross‐couplings with (hetero)aryl bromides as well as allylic and benzylic halides. The arylated N‐morpholino amides were converted into various ketones by LaCl3⋅2 LiCl mediated acylation with Grignard reagents. The new, solid enolates were used to prepare a potent anti‐breast‐cancer drug candidate in six steps and 23 % overall yield.  相似文献   

10.
[reaction: see text] The direct transformation of aryl bromides into the corresponding Weinreb amides via Pd-catalyzed aminocarbonylation at atmospheric pressure is reported.  相似文献   

11.
[formula: see text] Described herein is the first example of the palladium-catalyzed coupling of vinylogous amides with aryl bromides and chlorides. The scope of this reaction with respect to the aryl component is investigated. Additionally, a tandem reaction sequence in which the above coupling is followed by an intramolecular Heck reaction is presented. These reactions can be applied to high-yielding, one-pot syntheses of nitrogen-containing heterocycles.  相似文献   

12.
A mild and general method for the conversion of aryl, heteroaryl, and vinyl bromides into the corresponding iodides was developed utilizing a catalyst system comprising 5 mol % of CuI and 10 mol % of a 1,2- or 1,3-diamine ligand. A variety of polar functional groups are tolerated, and even N-H containing substrates such as sulfonamides, amides, and indoles are compatible with the reaction conditions. Both the reaction rate and the equilibrium conversion of the aryl bromide depend on the choice of the halide salt and the solvent. The best results were obtained using NaI as the halide salt and dioxane, n-butanol, or n-pentanol as the solvents.  相似文献   

13.
A palladium-catalyzed, microwave assisted carbonylative reaction is described for the synthesis of benzamides from aryl bromides and primary or secondary amines. The developed method uses bis(cyclopentadienyldicarbonyliron) as a solid source of carbon monoxide to produce a diverse set of secondary and tertiary amides in 42–82% yield.  相似文献   

14.
无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用   总被引:1,自引:0,他引:1  
 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86%, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.  相似文献   

15.
Mild, efficient, copper-catalyzed N-arylation procedures for nitrogen heterocycles, amides, carbamates, and C-arylation procedures for malonic acid derivatives have been developed that afford high yields of arylated products with excellent selectivity. The N-arylation of imidazole with aryl bromides or iodides was found to be greatly accelerated by inexpensive, air-stable catalyst systems, combining catalytic copper salts or oxides with a set of structurally simple chelating ligands. The reaction was shown to be compatible with a broad range of aryl halides, encompassing sterically hindered, electron-poor, and electron-rich ones, providing the arylated products under particularly mild conditions (50-82 degrees C). The lower limit in ligand and catalyst loading and the scope of Ullmann-type condensations catalyzed by complexes bearing those ligands with respect to the nucleophile class have also been investigated. Chelating Schiff base Chxn-Py-Al (1c) generates a remarkably general copper catalyst for N-arylation of pyrrole, indole, 1,2,4-triazole, amides, and carbamates; and C-arylation of diethyl malonate, ethyl cyanoacetate, and malononitrile with aryl iodides under mild conditions (50-82 degrees C). The new method reported here is the most successful to date with regard to Ullmann-type arylation of some of these nucleophiles.  相似文献   

16.
The scope of the palladium-catalyzed silylation of aryl halides with triethoxysilane has been expanded to include aryl bromides. A more general Pd(0) catalyst/ligand system has been developed that activates bromides and iodides: palladium(0) dibenzylideneacetone (Pd(dba)(2)) is activated with 2-(di-tert-butylphosphino)biphenyl (Buchwald's ligand) (1:2 mol ratio of Pd/phosphine). Electron-rich para- and meta-substituted aryl halides (including unprotected aniline and phenol derivatives) undergo silylation to form the corresponding aryltriethoxysilane in fair to excellent yield; however, ortho-substituted aryl halides failed to be silylated.  相似文献   

17.
A method for the Pd-catalyzed carbonylation of aryl bromides has been developed using Xantphos as the ligand. This method is effective for the direct synthesis of Weinreb amides, primary and secondary benzamides, and methyl esters from the corresponding aryl bromides at atmospheric pressure. In addition, a putative catalytic intermediate, (Xanphos)Pd(Br)benzoyl, was prepared and an X-ray crystal structure was obtained revealing an unusual cis-coordination mode of Xantphos in this palladium-acyl complex.  相似文献   

18.
We report a Ni-catalyzed process for the cross-coupling of tertiary alkyl nucleophiles and aryl bromides. This process is extremely general for a wide range of electrophiles and generally occurs with a ratio of retention to isomerization >30:1. The same procedure also accommodates the use of aryl triflates, vinyl chlorides, and vinyl bromides as the electrophilic component.  相似文献   

19.
Two-stage reaction of methyl anthranilate with aryl(alkyl) isocyanates in keeping with the quantumchemical calculations and XRD analysis resulted in 3-aryl(alkyl)quinazoline-2,4(1H,3H)-diones that by treatment with alkyl halides, phenacyl bromides, esters and amides of chloroacetic acid were converted into the corresponding 1-alkyl derivatives.  相似文献   

20.
Carbonylation reactions allow the efficient synthesis of all kinds of carbonyl‐containing compounds. Here, we report a straightforward synthesis of various imides from olefins and CO for the first time. The established hydroamidocarbonylation reaction affords imides in good yields (up to 90 %) and with good regioselectivity (up to 99:1) when applying different alkenes and amides. The synthetic potential of the method is highlighted by the synthesis of Aniracetam by intramolecular hydroamidocarbonylation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号