Behavior of polystyrene-based nano- and microcomposites under fast compression

Composites based on polystyrene (PS) and core-shell hybrid nanoparticles of molecular silica sol are studied during fast compression. At a certain critical pressure, PS and the related composites are found to fail instantaneously. This process is accompanied by the emission of electromagnetic and acoustic waves. The sample composition and the filler particle size change both the critical pressure during explosion and the frequency characteristics of the appearing electromagnetic and acoustic waves. The fracture of PS and the related composites is accompanied by the formation of a fibrillar structure.     

Acoustic wave generation by microwaves and applications to nondestructive evaluation

Although acoustic wave generation by electromagnetic waves has been widely studied in the case of laser-generated ultrasounds, the literature on acoustic wave generation by thermal effects due to electromagnetic microwaves is very sparse. Several mechanisms have been suggested to explain the phenomenon of microwave generation, i.e. radiation pressure, electrostriction or thermal expansion. Now it is known that the main cause is the thermal expansion due to the microwave absorption. This paper will review the recent advances in the theory and experiments that introduce a new way to generate ultrasonic waves without contact for the purpose of nondestructive evaluation and control. The unidirectional theory based on Maxwell's equations, heat equation and thermoviscoelasticity predicts the generation of acoustic waves at interfaces and inside stratified materials. Acoustic waves are generated by a pulsed electromagnetic wave or a burst at a chosen frequency such that materials can be excited with a broad or narrow frequency range. Experiments show the generation of acoustic waves in water, viscoelastic polymers and composite materials shaped as rod and plates. From the computed and measured accelerations at interfaces, the viscoelastic and electromagnetic properties of materials such as polymers and composites can be evaluated (NDE). Preliminary examples of non-destructive testing applications are presented.     

Microwave excitation of ultrasound in graphite-fiber reinforced composite plates

In this paper is demonstrated the effect of microwave beam polarization on the thermal generation of acoustic waves in continuous fiber-reinforced composite laminates. It is found that beam polarization strongly influences the dielectric interaction that leads to thermal losses, bulk expansion, and acoustic wave generation. The oriented graphite fibers in the composite laminate effectively short the microwave fields and reduce the generation efficiency nearly to zero. Ultrasonic waves at several hundred kHz generated in the composite are detected by air-coupled acoustic transducers located on the opposite side of the plate specimen from the 9.41 GHz incident microwave beam. With some averaging signal-to-noise ratios of better than 26 dB are obtained. Applying a conventional model of electromagnetic wave scattering in anisotropic media to this experiment yields good agreement between calculations and measured data. Implications for microwave-acoustic testing of graphite-reinforced composites are also discussed.     

声诱导电磁场的赫兹矢量表示与多极声电测井模拟

在假设声场不受电磁场影响的前提下，将Pride声电耦合方程组化为具有电流源的麦克斯韦方程组.与空间位置固定的电流源产生的电磁场不同，孔隙地层中声波诱导的电磁场是由空间波动的电流源产生的.通过引入赫兹矢量，将求解麦克斯韦方程组问题转化为求解关于赫兹矢量的非齐次矢量赫姆霍兹方程组.通过求解该方程组，得出电磁场表达式.利用此方法，针对声电效应测井，分别计算了由单极声源、偶极声源、四极声源激发的井内声场及其诱导电磁场的全波波形. 关键词： 孔隙介质 诱导电磁场 测井 多极声源     

Modeling of micromachined silicon–polymer 2-2 composite matching layers for 15 MHz ultrasound transducers

Silicon–polymer composites fabricated by micromachining technology offer attractive properties for use as matching layers in high frequency ultrasound transducers. Understanding of the acoustic behavior of such composites is essential for using them as one of the layers in a multilayered transducer structure. This paper presents analytical and finite element models of the acoustic properties of silicon–polymer composites in 2-2 connectivity. Analytical calculations based on partial wave solutions are applied to identify the resonance modes and estimate effective acoustic material properties. Finite Element Method (FEM) simulations were used to investigate the interaction between the composite and the surrounding load medium, either a fluid or a solid, with emphasis on the acoustic impedance of the composite. Composites with lateral periods of 20, 40 and 80 μm were fabricated and used as acoustic matching layers for air-backed transducers operating at 15 MHz. These composites were characterized acoustically, and the results were compared with analytical calculations. The analytical model shows that at low to medium silicon volume fraction, the first lateral resonance in the silicon–polymer 2-2 composite is defined by the composite period, and this lateral resonant frequency is at least 1.2 times higher than that of a piezo-composite with the same polymer filler. FEM simulations showed that the effective acoustic impedance of the silicon–polymer composite varies with frequency, and that it also depends on the load material, especially whether this is a fluid or a solid. The estimated longitudinal sound velocities of the 20 and 40 μm period composites match the results from analytical calculations within 2.7% and 2.6%, respectively. The effective acoustic impedances of the 20 and 40 μm period composites were found to be 10% and 26% lower than the values from the analytical calculations. This difference is explained by the shear stiffness in the solid, which tends to even out the surface displacements of the composites.     

Acoustic-electromagnetic slow waves in a periodical defective piezoelectric slab

Coupled slow waves, slow acoustic waves, and electromagnetic waves are simultaneously achieved based on a piezoelectric material, in which a line defect is created within a honeycomb lattice array of cylindrical holes etched in a LiNbO_3 slab. Finite element simulations in frequency domain and time domain demonstrate that a highly localized slow mode is obtained in the defect. Owing to the piezoelectricity of LiNbO_3, acoustic and electromagnetic waves are coupled with each other and transmit along the line defect. Therefore, in addition to a slow acoustic wave, an electromagnetic wave with a group velocity even lower than conventional acoustic waves is achieved.     

Electrophysical and acoustic properties of magnetic elastomers structured by an external magnetic field

Magnetoactive elastomers are promising for use in designing of magnetically operated devices for signal processing and sensors. The results from studying the electrophysical and acoustic properties of new magnetoactive elastomers structured by a nonuniform magnetic field are presented. It is shown that the prestructuring of the magnetic disperse filler by a magnetic field during composite synthesis substantially improves the coefficient of the transmission of electromagnetic radiation through the sample. The effect gets stronger as the mass fraction of filler increases. As the filler concentration grows, the transmission coefficient falls by 50%, and the ref lection coefficient grows by a factor of 150%. The longitudinal elastic modulus and the density vary within the ranges of 1.4–1.8 GPa and 2485–3362 kg m^–3, respectively, depending on the magnetic filler concentration and the sample’s structuring. The obtained results demonstrate the potential of usinf structured magnetoactive elastomers as radar absorbing materials.     

Influence of the porosity on the dispersion of the phase velocity of longitudinal acoustic waves in isotropic metal-matrix composites

The influence of the volumetric porosity of isotropic metal-matrix composite materials, which are reinforced with ceramic microparticles, on the dispersion of the phase velocity of longitudinal acoustic waves is investigated. For this purpose, the method of broadband acoustic spectroscopy with a laser source of ultrasound and piezoelectric detection of nanosecond ultrasonic pulses is used. Composite samples based on a silumin matrix with added silicon carbide (SiC) microparticles in different mass concentrations (3.8–15.5%) were investigated. As the concentration of SiC particles in a sample increases, its porosity that is determined using the hydrostatic-weighing method also increases. The simultaneous increase in the filler concentration and porosity leads to the appearance of a dispersion of the phase velocity of longitudinal acoustic waves in the sample within the frequency range of 3–25 MHz. The obtained empirical relationship between the relative change in the phase velocity and the sample porosity can be used to obtain a proximate quantitative estimate of the bulk porosity of the isotropic metal-matrix composite materials.     

Decisive properties of graphite-filled cement composites for device application

Graphite-filled cement composites have been explored in order to design a new conductor–insulator composite system that can show higher shielding effectiveness to electromagnetic (EM) radiation besides higher mechanical strength. The fascinating feature of this work is the processing of cement/graphite composites through which both reflection and absorption of EM radiation are anticipated to increase with increase of graphite filler. The dc conductivity was initially found to increase rapidly with the increase in filler concentration; it then approached saturation after incorporation of 10 wt. % graphite. The permittivity increased progressively with increase in filler loading. Decrease in permittivity with increasing frequency has been registered for all compositions of the composites. The dielectric behavior can be endorsed to Maxwell–Wagner–Sillars theory, both in terms of filler concentration and frequency dependence. At a low frequency of 10 Hz, a very high dielectric constant of the order of 10⁸ has been noticed in 5 wt. % graphite composite, which is expected to increase further with increase in graphite content. The D-Shore hardness results have revealed very little alteration in hardness with increasing graphite content. PACS  72.80.Tm; 77.22.Ch; 77.22.Gm; 81.20.Ev; 81.40.Tv     

Electromagnetic interference shielding effectiveness of reinforced composite with graphene oxide-lead oxide hybrid nanosheets

ABSTRACT

The rapid development of telecommunication devices and related technologies improved the distribution of electromagnetic (EM) waves within the environment, which can adversely affect the performance of electronic systems and put the life of living species in serious danger; thus, practical alternatives are required to protect vulnerable sources from them. To address this demand, we developed reinforced composites with graphene oxide (GO)-lead oxide (GO-Pb₃O₄) hybrid 2D nanosheets at diverse filler loadings by employing the vacuum shock technique. Next, the developed fillers and composites were well characterized by the diverse analysis methods and their electromagnetic interference shielding effectiveness (EMI SE) was evaluated and compared with their X-ray shielding performance. The obtained results showed that the developed composites can perfectly attenuate X-ray waves and weaken the total power of applied EM waves (in X-band frequency (8.2–12.4 GHz)) more than 50%. In this regard, a 6 mm thick specimen containing 10?wt% GO-Pb₃O₄ attenuated emitted X-ray waves equal to 4.06, 4.83 and 3.91?mmAl at 40, 60 and 80?kVp energies, which shows about 124%, 124% and 121% increase, respectively, in the X-ray attenuation compared with neat epoxy resin. These results indicated that developed composites are perfect candidates to protect vulnerable sources from diverse EM sources, and despite the insulative nature of the GO-Pb₃O₄, these hybrid nanosheets can act as a potential barrier against EM waves.     

电磁波在大面积等离子体片中传播特性的分析

脉冲磁约束线形空心阴极放电形成的大面积等离子体片可应用于等离子体天线、隐身及模拟超音速飞行器表面的等离子体鞘套. 本文首次利用实测等离子体片电子密度时空分布和横向场传播矩阵法, 研究了电磁波在等离子体片中反射率、透射率、吸收率随频率及脉冲放电时间的变化特征. 结果表明: 极化方向平行磁场的电磁波, 在小于截止频率的低频带内具有较高的反射率和吸收率, 增大电流, 反射率增加, 吸收率下降, 在大于截止频率的高频带内反射率和吸收率较低, 增大电流, 透射率下降, 吸收率升高; 极化方向垂直磁场的电磁波在高混杂谐振频率附近存在吸收率明显增强的吸收带, 谐振吸收峰值与放电电流无关; 脉冲放电期间, 电磁波的反射率、透射率与吸收率由不稳定过渡到稳定的时间约为100 μs, 过渡时间随着放电电流的增加而增大, 极化方向垂直磁场、小于截止频率的电磁波在稳定放电阶段谐振吸收较强. 本文的研究成果对利用等离子体片实现对电磁波的稳定高反射作用具有重要意义.     

Surface polaritons in composite media with time dispersion of permittivity and permeability

The propagation of electromagnetic waves in a composite medium based on an array of conducting wires in a ferromagnetic nonconducting matrix is discussed. It is demonstrated that, in certain ranges of frequencies and wavelengths, the composite under investigation can possess properties inherent in a “left-handed” medium. The regions of the existence of bulk and surface localized electromagnetic waves are explored. Consideration is given to the dispersion of surface electromagnetic waves in thick layers of the composite.     

Physical investigation of acoustic waves induced by the oscillation and collapse of the single bubble

The objective of this paper is to apply both experimental and numerical methods to investigate acoustic waves induced by the oscillation and collapse of a single bubble. In the experiments, the schlieren technique is used to capture the temporal evolution of the bubble shapes, and the corresponding acoustic waves. The results are presented for the single bubble generated by a low-voltage bubble generator in the free field of water. During the numerical simulations, a three-dimensional (3D) weakly compressible model is introduced to investigate the single bubble dynamics, including the generation and propagation of acoustic waves. The results show that (1) Compression wave, rarefaction wave and shock wave are generated during expansion stage, collapse stage and rebound stage of the bubble respectively. (2) Compression waves are induced by the rapid expansion of the bubble and eventually steepen into one shock wave propagating outward in the liquid, then another strong shock wave is emitted at the final collapse stage. The velocity and pressure of the liquid field increases after the shock wave. (3) Rarefaction waves are generated during the collapse stage due to the contraction of the bubble. The rarefaction wave reduces the liquid pressure and its spatial distribution is dispersive. The pressure of these acoustic waves and their effect on the liquid velocity attenuate with the increase of propagation distance.     

Generation of pulses upon nonresonant acousto-electromagnetic interaction

New mechanisms of generation of acoustic and electromagnetic soliton-like pulses in an optoelastic medium upon nonlinear nonresonant interaction of the polarization components of an electromagnetic field with acoustic oscillations in the medium are considered. It is shown that the acousto-electromagnetic interaction in such a system may lead to the formation of coherent soliton excitations in a thin crystal plate. It is found that a modulation instability occurs in an extended medium, which is caused by the spatial effects and leads to the generation of transverse sound waves. The evolution of a light field in a one-dimensional extended periodic optoelastic medium is also considered. It is shown that acoustic and electromagnetic solitons can be generated due to the mixing of direct and backward optical waves and their nonresonant interaction with a sound wave.     

Electroseismic waves excited by vertical magnetic dipole in borenole

Acoustic and electromagnetic fields are coupled in a fluid saturated porous medium due to seismoelectric effect. Seismoelectric well logging method has been proposed to detect deep target formation utilizing such effect. Because of uncoupling of SH waves with P-SV waves, a simple and forthright way to get shear waves information is possible, especially for soft or slow formation whose shear wave velocity is lower than the velocity of borehole fluid. We consider the wave fields excited by a vertical magnetic dipole (VMD) source. Two methods are used to simulate, one is the coupled method based on Pride model and the other is the uncoupled method. For two methods, the frequency wavenumber domain representations of the acoustic field and associated seismoelectric field are formulated. The full waveforms of acoustic waves and electromagnetic wave induced SH waves excited by VMD source in the time domain propagation in borehole are simulated and analyzed.     

Electromagnetic wave collapse in a radiation background

The nonlinear interaction, due to quantum electrodynamical (QED) effects between an electromagnetic pulse and a radiation background, is investigated by combining the methods of radiation hydrodynamics with the QED theory for photon-photon scattering. For the case of a single coherent electromagnetic pulse, we obtain a Zakharov-like system, where the radiation pressure of the pulse acts as a driver of acoustic waves in the photon gas. For a sufficiently intense pulse and/or background energy density, there is focusing and the subsequent collapse of the pulse. The relevance of our results for various astrophysical applications are discussed.     

Transformation of acoustic waves in upper atmosphere

The transformation of acoustic waves into electromagnetic oscillations in the plasma of the upper atmosphere is analyzed. It is demonstrated that acoustic oscillations in ionosphere in the presence of the gradients of gas temperature and electron concentration lead to plasma vortices that provide the generation of electromagnetic waves.     

Enhanced piezoresistivity in Ni--silicone rubber composites

This paper reports that the nickel--silicone rubber composites with enhanced piezoresistivity were synthesized with much reduced nickel concentration. A large piezosensitivity of 0.716/kPa and a gauge factor of 600 have been obtained for a composite sample with filler-polymer ratio of 2.7:1 by weight. Measurements of resistance as a function of uniaxial force reveal that the piezoresistance arises predominantly from the internal heterogeneity of the material and the effect of geometrical changes of samples under pressure is neglectably small. The nonlinear current--voltage characteristic of the composite depends strongly on the filler content, the initial compression and the electrical current flowing in the sample. Ohmic behaviour has been observed only in the highly compressed samples. The breakdown strength decreases with increasing filler content of the composite. Both I-V and R-f characteristics indicates that the resistivity of the composites decreases with electrical field, suggesting that the composite may also be used to make voltage sensitive resistors for protecting circuits. All the experimental results favour a quantum tunnelling mechanism of conductivity. It finds that the concept `negative resistance', often used to describe the phenomena that current decreases with increasing voltage, is not appropriate and should be avoided.     

基于动电效应的震电测井方法研究进展*

与双电层和孔隙流体渗流有关的声波-电磁场耦合效应(动电耦合波)在油气储层勘探、地震电磁场等领域有着潜在应用价值。该文简述动电耦合波在理论模型以及井孔动电耦合波的实验测量、模拟计算方面的研究进展,并对油气储层测井领域进一步的动电耦合波研究进行了展望。基于动电信号的探测方法同时接收声波和电磁场两类信号,可避免单一类别信号方法的不足。实验获得了岩心的动电耦合系数,但其表征的孔隙岩石物理性质还有待进一步认识。基于耦合控制方程,开展了震电波场的计算和分析。结果表明,声源激发后,可接收到伴随声波的电磁信号和早于声波的电磁首波。这两类信号都既对影响声波特性的岩石模量、孔隙度和渗透率等参数敏感,又与电导率等岩石电学性质密切相关。非饱和岩石动电耦合波理论和基于动电耦合波的参数反演方法等问题有待进一步研究。