电磁编码超材料的理论与应用

本文系统地对编码超材料、数字超材料及现场可编程超材料的新进展进行了综述,讨论其对电磁波的实时调控和构造多功能器件的能力。首先,引入1-bit编码超材料,由"0"和"1"两种编码单元构成,分别对应于相位相反的电磁响应。通过控制不同的"0"和"1"编码序列,可以调控电磁波,并实现不同功能。这种1-bit编码超材料可以扩展到2-bit,甚至更高比特。其次,介绍了一种由开关二极管来控制的数字编码超材料,每个编码单元可通过二极管的开和关来获得不同的相位响应,进而获得不同的数字态。结合现场可编程门阵列(FPGA)控制系统,实现了对数字超材料的实时可编程设计,构造出现场可编程超材料。最后,研究了编码超材料对太赫兹波的调控,包括太赫兹波宽带漫散射及其对目标雷达散射截面(RCS)的缩减、各向异性编码超材料对太赫兹波的极化调控和波束调控等。数值仿真和实验测试结果吻合很好,验证了编码超材料的出色性能,展示了编码超材料调控电磁波的多功能性。编码超材料对微波及太赫兹波的实时控制可用于制作波束分离、波束偏折、极化转换等功能器件,也可在宽带范围内有效缩减目标RCS。     

超构天线:原理、器件与应用

自从电磁波被发现和应用以来,利用各种材料或者结构调节电磁波的辐射行为、构造高性能的电磁辐射器件一直是研究人员的追求目标.经过百余年的发展,电磁辐射器件的方向性提高、带宽拓展等技术逐渐达到瓶颈.受自然材料电磁特性的限制,微带天线、喇叭天线等传统电磁辐射器件存在体积重量大、工作带宽窄、无法快速动态调控等缺陷,难以满足日益发展的通信技术的需求.近年来出现的亚波长结构可在深度亚波长尺度下调控电磁波的传输行为,出现了多种奇异的电磁现象,完善了传统的电磁学理论,在一定程度上突破了传统材料电磁特性的限制,形成全新的电磁辐射技术,有效解决了传统天线存在的口径大、厚度高、带宽窄等难题,促进了电磁学、光子学、材料学等领域的发展.这种基于超构材料的新型天线可以被称为超构天线,具有高方向性、低副瓣、超宽带、可重构等传统天线难以实现的功能.本文主要回顾了近年来基于亚波长超构材料的超构天线技术的发展现状和取得的成果,介绍了超构材料在亚波长尺度下对电磁波振幅、相位、偏振态等的衍射调控机理,以及在此基础上形成的新型辐射器件,例如相控阵天线、高方向性天线、低雷达散射截面天线,基于亚波长结构的多种偏振调控器件及其在天线中的应用等.在衍射极限尺度下,这种亚波长结构的调控行为可有效提升电磁辐射器件的方向性、带宽,并可重构天线的工作频率、偏振态等性能.     

Manipulate light polarizations with metamaterials: From microwave to visible

Polarization is an important characteristic of electromagnetic (EM) waves, and efficient manipulations over EM wave polarizations are always desirable in practical applications. Here, we review the recent efforts in controlling light polarizations with metamaterials, at frequencies ranged from microwave to visible. We first presented a 4 × 4 version transfer matrix method (TMM) to study the scatterings by an anisotropic metamaterial of EM waves with arbitrary propagating directions and polarizations. With the 4 × 4 TMM, we discovered several amazing polarization manipulation phenomena based on the reflection geometry and proposed corresponding model metamaterial systems to realize such effects. Metamaterial samples were fabricated with the help of finite-difference-time-domain (FDTD) simulations, and experiments were performed to successfully realize these ideas at both microwave and visible frequencies. Efforts in employing metamaterials to manipulate light polarizations based on the transmission geometry are also reviewed.     

基于石墨烯编码超构材料的太赫兹波束多功能动态调控

提出了一种基于石墨烯带的太赫兹波段的1 bit编码超构材料,可以实现太赫兹波束的数目、频率、幅度等参数多功能动态调控.该结构由金属薄膜、聚酰亚胺、硅、二氧化硅、石墨烯带组成.通过对石墨烯带施加两种不同的电压,可以实现一定频率范围内相位差接近180?的"0"和"1"数字编码单元,进而构成1 bit动态可控的编码超构材料.全波仿真结果表明,不同序列的编码超构材料能够实现波束数目从单波束、双波束、多波束到宽波束的调控.相同序列的编码超构材料,通过施加石墨烯带的不同电压能够实现宽频段波束频率的偏移.对于000000或者111111周期序列的编码超构材料,通过施加石墨烯带的不同电压还能够实现波束幅度的调控.因此这种基于石墨烯带的编码超构材料为灵活调控太赫兹波提供了一种新的途径,将在雷达隐身、成像、宽带通信等方面具有重要的意义.     

太赫兹超材料生物传感器的应用研究进展

太赫兹（THz）波,是指频率范围在0.1～10 THz的电磁波,在电磁波谱中处于红外与微波之间。太赫兹波的光子能量相对于可见光更低,1 THz对应的能量大约只有4.14 meV,意味着这将大大减少对生物体内组织器官的辐射而引起的伤害,不会对生物分子产生电离。因此,该波段在基础科学、人体安检、危险品检测、高速通信和医学成像等领域具有重要的潜在应用价值。但在医药和生物探测的应用中,通常需要检测微量的分析物,这就需要更高的灵敏度和检测的准确度。但是现存的检测方法受到太赫兹波强度检测可靠性不高的影响。基于超材料的生物传感可以通过增强局域电磁谐振,实现亚波长分辨,大大提高了传感器的分辨率与灵敏度,引起了人们的广泛关注。超材料是一种人工设计的周期性结构,通过合理设计可以增强局域电磁谐振响应,实现亚波长分辨,大大提高传感器的分辨率与灵敏度。太赫兹超材料传感器为生物传感领域提供了一种新的检测方法,具有灵敏度高、响应速度快、无标记检测等优点。随着微纳加工技术的快速发展,制作超材料太赫兹传感器的成本不断降低,从而在生物医学领域具有非常大的潜在应用价值。基于超材料的太赫兹传感器的研究已成为目前一个非常热门的国际前沿方向。但是关于太赫兹超材料传感器的最新研究进展未见报道,为此通过大量搜集并整理相关资料,综述了太赫兹超材料传感器在各种生物探测场景中的最新应用,分别从医学诊断、食品安全、农药检测等方面展开介绍。最后,对太赫兹超材料在生物传感器的发展和应用前景进行了总结和展望。该研究将为人们充分掌握太赫兹超材料生物传感器的最新应用进展提供重要参考,同时为太赫兹超材料传感器的发展和应用提供方向性的指导。     

Manipulate light polarizations with metamaterials: From microwave to visible

Polarization is an important characteristic of electromagnetic (EM) waves, and efficient manipulations over EM wave polarizations are always desirable in practical applications. Here, we review the recent efforts in controlling light polarizations with metamaterials, at frequencies ranged from microwave to visible. We first presented a 4 × 4 version transfer matrix method (TMM) to study the scatterings by an anisotropic metamaterial of EM waves with arbitrary propagating directions and polarizations. With the 4 × 4 TMM, we discovered several amazing polarization manipulation phenomena based on the reflection geometry and proposed corresponding model metamaterial systems to realize such effects. Metamaterial samples were fabricated with the help of finite-difference-time-domain (FDTD) simulations, and experiments were performed to successfully realize these ideas at both microwave and visible frequencies. Efforts in employing metamaterials to manipulate light polarizations based on the transmission geometry are also reviewed.     

Peculiarities of propagation of electroinductive waves in magnetic metamaterials

The coupling of doubly split ring resonators in the GHz range has been experimentally, analytically, and numerically studied in order to design a metamaterial with dominant electrical coupling as a model of nanoscale metamaterials. An example of propagation of GHz electroinductive waves in a metamaterial is demonstrated.     

基于拓扑优化设计的宽频吸波复合材料

本文基于拓扑优化方法设计并制备了一种宽频吸波复合材料,该吸波复合材料由高强玻璃纤维透波板、电阻损耗型超材料、聚氨酯泡沫和碳纤维反射板组成.仿真及测试结果表明,该吸波复合材料在2–18 GHz频段内的平板反射率均小于-12 dB.并且由于采用高强玻璃纤维及碳纤维复合材料作为面板层,聚氨酯泡沫作为芯材,因此该吸波复合材料不仅在较宽频带内对电磁波具有高的吸收率,同时还具有质量轻、耐高温、耐低温、耐湿热、抗腐蚀等特点,便于实现吸波与力学性能及耐环境性能的兼容,具有一定的工程应用价值.     

对电磁波极化不敏感超材料吸波体的研究

设计了一个在微波频段对极化不敏感的超材料吸波体。该超材料微观单元由4个互相垂直的电谐振环和短导线构成,这种结构克服了Landy提出的结构对电磁波极化敏感的缺点,对垂直极化和水平极化电磁波都有很好的吸收效果。采用数值仿真方法,在12-180Hz波段提取了这种超材料的S参数,计算了其吸波率。单层超材料吸波体在14GHz处达到吸波峰,吸波率达57．4％;多层组合吸波体在150Hz处吸波率峰值达到87．6％。     

Dynamic study and applications of metamaterial systems

We investigate the dynamic characteristics of metamaterial systems, such as the temporal coherence gain of the superlens, the causality limitation on the ideal cloaking systems, the relaxation process and essential elements in the dispersive cloaking systems, and the extending of the working frequency range of cloaking systems. The key point of our study is the physical dispersive properties of metamaterials, which are well-known to be intrinsically strongly dispersive. With physical dispersion, new physical pictures can be obtained for the waves propagating inside metamaterial, such as the “group retarded time” for waves inside the superlens and cloak, the causality limitation on real metamaterial systems, and the essential elements for design optimization. Therefore, we believe the dynamic study of metamaterials will be an important direction for further research. All theoretical derivations and conclusions are demonstrated by powerful finite-difference time-domain simulations.     

Near-field light localization using subwavelength apertures incorporated with metamaterials

We report strong near-field electromagnetic localization by using subwavelength apertures and metamaterials that operate at microwave frequencies. We designed split ring resonators with distinct configurations in order to obtain extraordinary transmission results. Furthermore, we analyzed the field localization and focusing characteristics of the transmitted evanescent waves. The employed metamaterial configurations yielded an improvement on the transmission efficiency on the order of 27 dB and 50 dB for the deep subwavelength apertures. The metamaterial loaded apertures are considered as a total system that offered spot size conversion ratios as high as 7.12 and 9.11 for the corresponding metamaterial configurations. The proposed system is shown to intensify the electric fields of the source located in the near-field. It also narrows down the electromagnetic waves such that a full width at half maximum value of λ/29 is obtained.     

Circular polarization converters based on bi-layered asymmetrical split ring metamaterials

In this paper, a kind of bi-layered asymmetrical split ring metamaterial was proposed as a circular polarization converter. Simulations and experiments at the microwave regime showed that the proposed structures can achieve the conversions from right-handed circularly polarized electromagnetic waves to left-handed ones and the reversed conversions in the opposite propagating direction. The linear to circular polarization transmission coefficients and the surface currents were investigated to understand the mechanism of the circular polarization conversions. Moreover, we optimized the proposed metamaterials by increasing the distance between the two metal layers. The proposed circular polarization converters have applications in microwave wave plates and metamaterial antennas.     

SU-8 based planar metamaterials with fourfold symmetry as selective terahertz absorbers

We report on the absorption properties of polarization-insensitive transmissive and reflective metamaterial absorbers based on two planar aluminium periodic structures and SU-8 epoxy resist. These absorbers were investigated using numerical simulation and experimental methods in the terahertz range (below 2 THz). SU-8 is a very promising organic material for dielectric layers in planar metamaterials, because its application simplifies the process of fabricating these structures and significantly reduces the fabrication time. The experimental absorption of the metamaterial absorbers has narrowband characteristics that were consistent with the numerical simulations. Power flow analysis in the transmissive metamaterial unit cell shows that the absorption in the terahertz range occurs primarily in the SU-8 layer of the absorber.     

基于石墨烯振幅可调的宽带类电磁诱导透明超材料设计

基于石墨烯的电控特性提出了一种由金属线谐振器和"H"型谐振器组成的宽带可调的类电磁诱导透明(类EIT)超材料结构.首先,利用CST Microwave Studio软件对该超材料结构的透射特性进行了仿真.该结构在1.05—1.46 THz内的透射窗由金属线谐振器的等离子谐振和"H"型谐振器的电感-电容谐振干涉相消引起,且暗模式谐振器的数量增多导致了透射窗带宽的增加.其次,仿真模拟了该结构在不同石墨烯费米能级下的透射特性.当石墨烯费米能级由0 eV逐渐增加到1.5 eV时,该结构透射窗在1.05—1.46 THz内的平均透射振幅由87%逐渐减少到25%,实现了宽带可调.同时,通过仿真模拟该结构在1.26 THz下的电场分布对其透射机理进行了分析,并实验制备了类EIT超材料结构样品,且利用太赫兹时域光谱对样品进行了透射性能测试,测试结果与仿真分析的趋势基本一致.     

Controlling flexural waves in thin plates by using transformation acoustic metamaterials

In this study, we design periodic grille structures on a single homogenous thin plate to achieve anisotropic acoustic metamaterials that can control flexural waves. The metamaterials can achieve the bending control of flexural waves in a thin plate at will by designing only one dimension in the thickness direction, which makes it easier to use this metamaterial to design transformation acoustic devices. The numerical simulation results show that the metamaterials can accurately control the bending waves over a wide frequency range. The experimental results verify the validity of the theoretical analysis. This research provides a more practical theoretical method of controlling flexural waves in thin-plate structures.     

Parabolic Split Ring Resonator (PSRR) based MNZ metamaterial with angular rotation for WiFi/WiMax/Wireless/ISM band applications

The engineering in artificial inclusions of metamaterials has immense potential to explore in the field of electromagnetic wave manipulation that created enormous opportunities in the design of millimetre or sub-millimetres structures. In this research paper, Parabolic Split Ring Resonator (PSRR) based MNZ (Mu-Near-Zero) metamaterial with a wider refractive index is introduced for WiFi/WiMax/Wireless/ISM band applications and printing on Rogers RT-5880 lossy substrate with a copper-based metallic structure at 5.8 GHz within the microwave frequency region. The resonant frequency, negative permittivity, near-zero permeability, and negative refractive index are between 5.5-6.3 GHz. This proposed metamaterial structure is analysed with array structures, different substrate material, different orientations, and split gaps.     

A polarization-/angle-insensitive, bandwidth-optimized, metamaterial absorber in the microwave regime

An enhanced metamaterial absorber based on the circumscribed-cross resonator is introduced in this paper. The new structure is polarization-independent, due to the symmetry of its unit cell, and is proven efficient for the attenuation of obliquely incident waves. The absorption mechanism is thoroughly investigated and is found to be mainly related to the losses of the dielectric substrate. Furthermore, by exploiting the scalability property of metamaterials, the operational bandwidth of our design can be drastically improved by placing unit cells with properly scaled resonators adjacent to each other. In this context, various combinations of three, four, and nine unit cells that can increase the full width at half maximum up to as much as 11.18?%, are developed. The overall performance of the proposed configurations is deemed promising for the realization of microwave metamaterial absorbers for several practical applications.     

Left-handed-media simulation and transmission of EM waves in subwavelength split-ring-resonator-loaded metallic waveguides

At microwave frequencies, hollow metallic waveguides behave in certain aspects as a "one-dimensional plasma." This feature will be advantageously used for simulating the propagation of electromagnetic (EM) waves in left-handed metamaterials provided the hollow waveguide is periodically loaded with split ring resonators. It will be shown that EM transmission in this structure is feasible within a certain frequency band even if the transverse dimensions of the waveguide are much smaller than the associated free-space wavelength. This effect can be qualitatively and quantitatively explained by the left-handed metamaterial theory, thus providing a new experimental validation for such a theory.     

基于声学超材料的低频可调吸收器

在当今社会,噪声污染已经成为人类健康的一大威胁,如何有效地控制和消除噪声污染一直是科研领域的一个重要话题.本文以开口环嵌套结构为模型,设计并制备了一种声学超材料.通过理论分析、数值模拟和实验测试,发现由于模型内部空腔的强烈耦合共振效应,该超材料可以在低频区域实现接近完美的吸声效应.此外,通过简单地绕轴旋转其内腔开口方向,即可改变该超材料的相对阻抗值,进而在较宽的频带范围内实现对吸收峰位置的可调控制.由于该超材料具有深亚波长的尺寸,因此非常有利于低频吸声器件的小型化和集成化,同时该模型也为宽带吸收器的设计奠定了基础.