Laser-diode-excited Blue Upconversion in Tm3+/Yb3+-codoped TeO2-Ga2O3-R2O (R=Li, Na, K) Glasses

This paper reports on intense blue upconversion in Tm³⁺/Yb³⁺ codoped TeO₂-Ga₂O₃-R₂O(R=Li, Na, K) glasses upon excitation with commercial available laser diode (LD). Effects of alkali ions on the Raman spectra, thermal stability and spectroscopic properties of the tellurite-gallium glasses have also been investigated. Energy transfer and the involved upconversion mechanisms have been discussed. Intense blue upconversion emission centered at 476 nm along with a weak red emission at 650 nm has been observed upon excitation of 977 nm LD, assigned to the transitions of , and and/or of Tm³⁺, respectively. The blue upconversion intensity has a cubelike dependence on incident pump laser power, indicating a three-photon process. However, a quadratic dependence of the 476 nm upconversion intensity on the incident pump laser power has been observed when samples under excitation of 808 nm LD due to a two-photon absorption process. Enhanced upconversion luminescence have been observed with replacing K⁺ for Na⁺ and Li⁺.     

Diffusion of proton in alumina-rich nonstoichiometric magnesium aluminate spinel

The phenomenon of the diffusion of proton and deuteron in a single crystal of magnesium aluminate spinel was studied by infrared absorption. The chemical diffusion coefficient of proton was determined by the relaxation time of the absorption intensity upon the substitution of deuteron with proton. The temperature dependence of the chemical diffusion coefficient of proton for was expressed as . The chemical diffusion coefficient of proton was found to be independent of the composition of spinel and of the atmosphere. Paper presented at the 11th Euro Conference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15 2007.     

Small magnetic polaron effect in lithium iron phosphates

The small polarons in LiFePO₄ are associated with the presence of Fe³⁺ ions introduced by the native defects in relative concentration in the samples known to be optimized with respect to their electrochemical properties. The nearest iron neighbours around the central polaron site are spin-polarized by the indirect exchange mediated by the electronic charge in excess. These small magnetic polarons are responsible for the interplay between electronic and magnetic properties that are quantitatively and self-consistently analysed. Comparison is made with other magnetic polaron effects in other members of the family of magnetic semiconductors to which this material belongs. Paper presented at the 11th Euro-Conference on Science and Technology of Ionics, Batz-sur-Mer, France, 9–15 September 2007.     

The electrochemical reactivity of the NiP<Subscript>3</Subscript> skutterudite-type phase with lithium

We report the electrochemical Li reactivity of the cubic NiP₃ phase, a candidate for anode applications for Li-ion batteries. NiP₃ reacts with nine lithium per formula unit leading to a first cycle reversible capacity of 1,475 mAh/g at an average potential of 0.9 V vs. Li+/Li°. Electrochemical measurements and complementary X-ray diffraction showed that NiP₃ presents a conversion process competing with an insertion process. A good cycleability may only be obtained on a limited potential window, excluding the low-potential region. This paper was presented at the 11th EuroConference on the Science and Technology of Ionics, Batz-sur-Mer, Sept. 9–15, 2007.     

Chemical stability of hydroxysulphate green rust synthetised in the presence of foreign anions: carbonate, phosphate and silicate

Hydroxysulphate green rust species were precipitated in the presence of various anions. is stable at ∼pH 7 and is transformed into a mixture of magnetite and ferrous hydroxide when the pH raised at ∼12. In the presence of carbonate species, is partially transformed into a mixture of magnetite and siderite at ∼pH 8.5. This transformation is stopped when silicate anions are present in the solution. As already observed for phosphate anions, the adsorption of silicate anions on the lateral faces of the crystals may explain this stabilization effect. Sulphate anions are easily exchanged by carbonate species at ∼pH 10.5. In contrast, anionic exchange between sulphate and phosphate anions was not observed.     

Tripolyphosphate as Precursor for REPO4:Eu3+ (RE = Y, La, Gd) by a Polymeric Method

A modification of the Pechini method was applied to obtain luminescent rare earth orthophosphates. The developed synthetic route is based on the ability of the tripolyphosphate anion () to act both as a complexing agent and as an orthophosphate precursor. Heating of aqueous solutions containing RE³⁺, Eu³⁺, , citric acid, and ethylene glycol led to polymeric resins. The ignition of these resins at different temperatures yielded luminescent orthophosphates. The produced nanosized phosphors (YPO₄:Eu³⁺, (Y,Gd)PO₄:Eu³⁺, and LaPO₄:Eu³⁺) were analyzed by infrared and luminescence spectroscopies, X-ray diffractometry, and scanning electron microscopy.     

Al,F-doped new perovskite lithium fast ion conductor Li3x La2/3−x□1/3−2x Ti1−y Al y O3−y F y (x=0.11)

Al, F-doped new perovskite lithium ion conductors (x=0.11) have been prepared by solid state reaction. It is found that a pure perovskite-structured phase with space group of P4mm(99) exits in the composition range of 0<y≤0.10. The sample with y=0.02 possesses the highest ionic conductivity of 1.06×10⁻³ S/cm at room temperature, and its decomposing voltage is 2.3 V. The factors affecting the conductivity of this system are discussed.     

Direct ammonia proton-conducting solid oxide fuel cells prepared by a modified suspension spray

A dense (BCSO) membrane was fabricated by a modified suspension spraying on porous NiO–BCSO anode support. In the process, the suspension was directly prepared by ball-milling the BaCO₃, CeO₂, and Sm₂O₃ powders in ethanol. A dense and uniform electrolyte layer in the thickness of 10 μm was successfully prepared on porous anode support by suspension spray process after co-sintering at 1,400 °C for 5 h. With (NSMO) cathode, a single cell was assembled and tested with hydrogen and ammonia as fuels, respectively. The hydrogen-fueled cell exhibits 1.01 V for open circuit voltage (OCV) and 560 mW/cm² for peak power density at 700 °C. In comparison, the cell in ammonia displays a similar performance (1.02 V for OCV and 530 mW/cm² for output), which indicates the liquid ammonia is a promising substitute for hydrogen. Moreover, the fuel cell displays good interface contacts. To sum up, ammonia-fueled solid oxide fuel cells prepared by this simple suspension spray is an alternative way to promote the commercialization.     

A theoretical study on calculation of absolute hydration enthalpies for some univalent ions

Using the total radius of alkaline fluorides and sodium halides and their experimental total enthalpy values, absolute hydration enthalpies of sodium and fluoride ions ( and ) were previously calculated. Also, by the help of data of sodium and fluoride ions for all alkaline metal ions and halides absolute hydration enthalpies were determined.

Thermoelectric power of YBa2Cu3Ox in equilibrium with gas phases

Thermoelectric power (TP) and electrical conductivity (EC) measurements were performed for YEa₂Cu₃O_x at 1128 K under controlled oxygen partial pressure varying between 50 and 10⁵ Pa. Three regimes are observed for the electrical properties. At low both TP and EC remain constant with . In the medium range sharp changes of both electrical parameters occur; TP changes sign from positive above 4×10² Pa to negative below this value. In the high region (>7.6×10³ Pa) TP vs log exhibits two slopes; 5.1 below 1.5×10⁴ Pa and 8.4 above this value. The slopes can be discussed in terms of the defect structure involving singly and doubly ionized oxygen vacancies below and above 7.6×10³ Pa, respectively.     

Monitoring structural transformation of hydroxy-sulphate green rust in the presence of sulphate reducing bacteria

The activities of bacterial consortia enable organisms to maximize their metabolic capabilities. This article assesses the synergetic relationship between iron reducing bacteria (IRB), Shewanella putrefaciens and sulphate reducing bacteria (SRB) Desulfovibrio alaskensis. Thus, the aim of this study was first to form a biogenic hydroxy-sulpahte green rust GR2( $ {\text{SO}}_{{\text{4}}} ^{{2 - }} The activities of bacterial consortia enable organisms to maximize their metabolic capabilities. This article assesses the synergetic relationship between iron reducing bacteria (IRB), Shewanella putrefaciens and sulphate reducing bacteria (SRB) Desulfovibrio alaskensis. Thus, the aim of this study was first to form a biogenic hydroxy-sulpahte green rust GR2() through the bioreduction of lepidocrocite by S. putrefaciens and secondly to investigate if sulfate anions intercalated in the biogenic GR2() could serve as final electron acceptor for a sulfate reducing bacterium, D. alaskensis. The results indicate that the IRB lead to the formation of GR2() and this mineral serve as an electron acceptor for SRB. GR2() precipitation and its transformation was demonstrated by using X-ray diffraction (DRX), M?ssbauer spectroscopy (TMS) and transmission electron spectroscopy (TEM). These observations point out the possible acceleration of steel corrosion in marine environment in presence of IRB/SRB consortia.     

NMR Studies on the Internal Structure of High-T c Superconductors and Other Anorganic Compounds

Spatially-resolved NMR is used to probe internal structures in highly correlated superconductors of optimally-doped (T _c = 85 K) and a heavy fermion superconductor CeCoIn₅ (T _c = 2.3 K). The characteristic change of the properties of ²⁰⁵Tl-NMR in the vortex state provides a clear evidence of the antiferromagnetic order in the vortex cores below 20 K in . We also obtain anomalous ¹¹⁵In-NMR spectra of CeCoIn₅, which provides a microscopic evidence for the occurrence of a spatially-modulated superconducting order parameter expected in a Fulde–Ferrel–Larkin–Ovchinnkov (FFLO) state.     

A-site deficient lanthanum-calcium chromite-titanates doped with 3d transition metals: synthesis,oxygen nonstoichiometry,electrical conductivity,and catalytic activity

Six (M = Cr, Mn, Fe, Co, Ni, Cu) and two (M = Ni, Cu) single-phase compositions were prepared by conventional solid-state reactions. Oxygen nonstoichiometry, electrical conductivity, phase transformations under reduction-reoxidation at high temperatures and catalytic activity for hydrocarbons oxidation of these compositions were investigated in a wide temperature and oxygen partial pressure range. The Cu-, Ni-, Co-, and Fe-containing compositions are decomposed in reducing Ar/H₂O/H₂ atmosphere with pH₂O / pH₂ = 0.3 at 1,000 °C, while the Cr- and Mn-containing ceramics remain stable at the same conditions. The metallic particles of the added 3d elements formed after decomposition were registered by X-ray diffraction method in case of Cu- and Ni-containing compositions. These formed composites can be completely reoxidized with formation of initial compositions by treatment in air at 1,000 °C. The electrical conductivity of the ceramics investigated in air and Ar/H₂O/H₂ gas flow increases with rising M content. The highest catalytic activity for oxidation of CH₄ and C₃H₆, which was comparable with the activity of the composite, shows the Cu-containing powders. Dedicated to Prof. Dr. Werner Weppner     

Quantisation of Twistor Theory by Cocycle Twist

We present the main ingredients of twistor theory leading up to and including the Penrose-Ward transform in a coordinate algebra form which we can then ‘quantise’ by means of a functorial cocycle twist. The quantum algebras for the conformal group, twistor space , compactified Minkowski space and the twistor correspondence space are obtained along with their canonical quantum differential calculi, both in a local form and in a global *-algebra formulation which even in the classical commutative case provides a useful alternative to the formulation in terms of projective varieties. We outline how the Penrose-Ward transform then quantises. As an example, we show that the pull-back of the tautological bundle on pulls back to the basic instanton on and that this observation quantises to obtain the Connes-Landi instanton on θ-deformed S ⁴ as the pull-back of the tautological bundle on our θ-deformed . We likewise quantise the fibration and use it to construct the bundle on θ-deformed that maps over under the transform to the θ-deformed instanton. The work was mainly completed while S.M. was visiting July-December 2006 at the Isaac Newton Institute, Cambridge, which both authors thank for support.     

Selectivity of anion exchange membrane modified with polyethyleneimine

Previous works have been made on the improvement of selectivity of ion exchange membranes using adsorption of polyelectrolyte on the surface of the materials. The modification of the surface material in the case of an anion exchange membrane concerns the hydrophilic/hydrophobic balance properties and its relationship with the hydration state. Starting from this goal, the AMX membrane has been modified, in this work, by adsorption of polyethyleneimine on its surface. Many conditions of modification of the AMX membrane surface were studied. A factorial experimental design was used for determining the influent parameters on the AMX membrane modification. The results obtained have shown that the initial concentration of polyethyleneimine and the pH of solution were the main influent parameters on the adsorption of polyethyleneimine on the membrane surface. Competitive ion exchange reactions were studied for the modified and the unmodified membrane involving $ {\text{C}}{{\text{l}}^{ - }} $ , $ {\text{NO}}_3^{ - } $ and $ {\text{SO}}_4^{{2 - }} $ ions. All experiments were carried out at constant concentration of 0.3?mol?L^?1 and at 25?°C. Ion exchange isotherms for the binary systems $ \left( {{\text{C}}{{\text{l}}^{ - }}/{\text{NO}}_3^{ - }} \right) $ , $ \left( {{\text{C}}{{\text{l}}^{ - }}/{\text{SO}}_4^{{2 - }}} \right) $ and $ \left( {{\text{NO}}_3^{ - }/{\text{SO}}_4^{{2 - }}} \right) $ were studied. The obtained results show that chloride was the most sorbed and the selectivity order both for the modified membrane and the unmodified one is: $ {\text{Cl}} > {\text{NO}}_3^{ - } > {\text{SO}}_4^{{2 - }} $ , under the experimental conditions. Selectivity coefficients $ {\text{K}}_{{{\text{C}}{{\text{l}}^{ - }}}}^{{{\text{NO}}_3^{ - }}} $ , $ {\text{K}}_{{2{\text{C}}{{\text{l}}^{ - }}}}^{{{\text{SO}}_4^{{2 - }}}} $ and $ {\text{K}}_{{2{\text{NO}}_3^{ - }}}^{{{\text{SO}}_4^{{2 - }}}} $ for the three binary systems and for the two membranes were determined. It was also observed that for the modified membrane the selectivity towards sulfate ion decrease and the modified membrane became more selective towards monovalent anions.     

Weber potential from finite velocity of action?

The Weber potential energy U for charges q and q' separated by the distance R is U = (qq'/R)[1 – (dR/dt)²/2c²]. If this potential arises from a finite velocity c of energy transfer Q', where the retarded rate of transfer from q' to q is dQ(t-R/c)/dt = Q'[1 – (dR/dt)/c] and where the advanced rate from q to q' is dQ(t+R/c)/dt = Q'[1 + (dR/dt)/c], then the resultant time-average root-mean-square action is given by . Identifying Q' with the Coulomb potential energy qq'/R, the Weber potential is obtained. Using the same argument, Newtonian gravitation yields a corresponding Weber potential energy, qq'/R being replaced by ( - Gmm'/R).     

Critical behavior of La0.67−y (Sr, Ba, Ca)0.33+y Mn1−x Sn x O3 (x = 0.01, 0.02, y = 0, 0.07) perovskites

The magnetic critical behavior of the manganese perovskite series $ {\text{La}}_{{0.67 - y}} {\left( {{\text{Sr,}}\,\,{\text{Ba,}}\,\,{\text{Ca}}} \right)}_{{0.33 + y}} {\text{Mn}}_{{1 - x}} {\text{Sn}}_{x} {\text{O}}_{3} The magnetic critical behavior of the manganese perovskite series (x = 0.01, 0.02, y = 0, 0.07) is studied by means of dc magnetic measurements and ¹¹⁹Sn M?ssbauer spectroscopy. The structure can be described by a rhombohedral unit cell (space group R–3C) for the samples where the A-site is occupied by La and Sr or La and Ba ions and orthorhombic unit cell (space group Pnma) for the samples where the A-site is occupied by La and Ca ions. Arrott and scaling plots show that the samples, where the A-site is occupied by La and Sr or La and Ba ions, follow the behavior of a conventional second-order ferromagnetic transition. In contrast, the samples that contain La and Ca ions in the A-site show anomalous behavior around Curie point. M?ssbauer measurements show two magnetic phases below T _c. One of them exhibits stronger exchange interactions with more rapid electron transfer between Mn³⁺/Mn⁴⁺, compared to the other.     

Energy dependence of the charge exchange reaction from muonic hydrogen to oxygen

The charge exchange reaction of negative muons from the atom to oxygen has been measured in gaseous mixtures of H₂ + O₂. The measurements were performed at three different relative oxygen concentrations ranging from 0.2% to 0.8% and total pressures 3.5–15 bar. A mean transfer rate of , describing the transfer from the ground state of thermalized atoms to oxygen, was determined. In order to investigate the energy dependence of the transfer rate, Monte Carlo simulations of the thermalization and the muon transfer were carried out. The comparison of measured and simulated time spectra yielded an epithermal transfer rate =3.9 10¹¹ s^-1 in the energy interval 0.12–0.22 eV. The analysis with the model of Two components shows that all measured time spectra can be reproduced with the same set of parameters.     

Weber electrodynamics: part III. mechanics,gravitation

Weber electrodynamics predicts the Kaufmann-Bucherer experiments and the fine structure energy level splitting of the H-atom (neglecting spin) without mass change with velocity (i.e., mass ). The Weber potential for the gravitational case yields Newtonian mechanics, confirming Mach's principle. It provides a cosmological condition yielding an estimated radius of the universe of 8 × 10⁹ light years. Despite these successes, the independent evidence for Kaufmann mechanics, where mass changes with velocity (i.e., mass ) is convincing. Perhaps a slight alteration may make the Weber theory compatible with Kaufmann mechanics.