Intrinsic pinning properties of FeSe0.5Te0.5

The intrinsic pinning properties of FeSe_0.5Te_0.5, which is a superconductor with a critical temperature T_c of approximately 14 K, were studied through the analysis of magnetization curves obtained using an extended critical state model. For the magnetization measurements carried out with a superconducting quantum interference device (SQUID), external magnetic fields were applied parallel and perpendicular to the c-axis of the sample. The critical current density J_c under the perpendicular magnetic field of 1 T was estimated using the Kimishima model to be equal to approximately 1.6 × 10⁴, 8.8 × 10³, 4.1 × 10³, and 1.5 × 10³ A/cm² at 5, 7, 9, and 11 K, respectively. Furthermore, the temperature dependence of J_c was fitted to the exponential law of J_c(0) × exp(?αT/T_c) up to 9 K and the power law of J_c(0) × (1 ? T/T_c)ⁿ near T_c.     

AlH3 between 65 and 110 GPa: Implications of electronic band and phonon structures

A first-principles density-functional-theory method has been used to reinvestigate the mechanical and dynamical stability of the metallic phase of AlH₃ between 65 and 110 GPa. The electronic properties and phonon dynamics as a function of pressure are also explored. We find electron–phonon superconductivity in the cubic Pm-3n structure with critical temperature T_c = 37 K at 70 GPa which decreases rapidly with the increase of pressure. Further unlike a previously calculated T_c-value of 24 K at 110 GPa, we do not find any superconductivity of significance at this pressure which is consistent with experimental observation.     

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

We report the achievement of transport critical currents in Sr_0.6K_0.4Fe₂As₂ wires and tapes with a T_c = 34 K. The wires and tapes were fabricated through an in situ powder-in-tube process. Silver was used as a chemical addition as well as a sheath material. All the wire and tape samples have shown the ability to transport superconducting current. Critical current density J_c was enhanced upon silver addition, and at 4.2 K, a largest J_c of ～1200 A/cm² (I_c = 9 A) was achieved for 20% silver added tapes, which is the highest in iron-based wires and tapes so far. The J_c is almost field independent between 1 T and 10 T, exhibiting a strong vortex pinning. Such a high transport critical current density is attributed to the weak reaction between the silver sheath and the superconducting core, as well as an improved connectivity between grains. We also identify a weak-link behavior from the apparent drop of J_c at low fields and a hysteretic phenomenon. Finally, we found that compared to Fe, Ta and Nb tubes, Ag was the best sheath material for the fabrication of high-performance 122 type pnictide wires and tapes.     

Surface electromigration of In on vicinal Si(0 0 1)

Surface mass transport of In film on vicinal Si(0 0 1) has been systematically investigated by a scanning Auger electron microscopy (SAM), low energy electron diffraction (LEED) and atomic force microscopy (AFM). It was observed that the temperature dependence of the mass transport shows the critical phenomenon. Above a critical temperature T_c, surface electromigration of the In film toward the cathode side dominated the surface mass transport on the vicinal Si(0 0 1) surface. The LEED and AFM observations revealed that the In film surface on the vicinal Si(0 0 1) consists of 3×4 terraces and (3 1 0) facets. The area ratio of the facet to the terrace exhibited abrupt an increase at T_c. It is believed that the change of the mass transport is related to the abrupt change of the area ratio of the facet to the terrace. Both the critical temperature T_c and the spread due to the surface electromigration of the In film depended on the configuration of the DC current direction and the step edge.     

Pinning,thermally activated depinning and their importance for tuning the nanoprecipitate size and density in high Jc YBa2Cu3O7−x films

YBa₂Cu₃O_7?x (Y123) films with quantitatively controlled artificial nanoprecipitate pinning centers were grown by pulsed laser deposition (PLD) and characterized by transport over wide temperature (T) and magnetic field (H) ranges and by transmission electron microscopy (TEM). The critical current density J_c was found to be determined by the interplay of strong vortex pinning and thermally activated depinning (TAD), which together produced a non-monotonic dependence of J_c on c-axis pin spacing d_c. At low T and H, J_c increased with decreasing d_c, reaching the very high J_c ～ 48 MA/cm² ～20% of the depairing current density J_d at 10 K, self-field and d_c ～ 10 nm, but at higher T and H when TAD effects become significant, J_c was optimized at larger d_c because longer vortex segments confined between nanoprecipitates are less prone to thermal fluctuations. We conclude that precipitates should extend at least several coherence lengths along vortices in order to produce irreversibility fields H_irr(77 K) greater than 7 T and maximum bulk pinning forces F_p,max(77 K) greater than 7–8 GN/m³ (values appropriate for H parallel to the c-axis). Our results show that there is no universal pin array that optimizes J_c at all T and H.     

Sulfur substitution and pressure effect on superconductivity of α-FeSe

In this paper, sulfur substitution and pressure effect on superconductivity of α-FeSe has been investigated in Fe(Se_1 ? xS_x)_0.88 (x = 0.1, 0.2). For x = 0.1, the critical temperature T_c is slightly larger than that of non-substituted sample, in consistent with the pressure effect on the superconductivity of α-FeSe. However, with further increasing S content to x = 0.2, T_c decreases. Temperature dependent of specific heat showed that the structural transition seems to be suppressed. T_c for x = 0.2 can be further decreased by applying pressure of 5 kbar, in contrary to the pressure effect on α-FeSe. We suggest that, in addition to the suppression of structural transition, other factors like the increase of carrier concentration should be considered for understanding the pressure effect on the superconductivity of α-FeSe.     

Magnetic properties of RPdIn (R=Gd–Er) compounds

AC susceptibility and DC magnetization measurements were performed for the RPdIn (R=Gd–Er) compounds both in the paramagnetic and in the ordered state. In opposite to GdPdIn, which is a ferromagnet (T_c=102 K), the other samples show a complex ferrimagnetic behavior with the additional transition at T_t<T_c. In the high-temperature phase (for T_t<T<T_c), a ferromagnetic interaction dominates, while in the low-temperature phase (for T⩽T_t) antiferromagnetic interactions with the magnetocrystalline anisotropy, especially strong for TbPdIn, come into play. The ordering temperatures are T_c=70, 34, 25 and 12.3 K for Tb-, Dy-, Ho- and ErPdIn respectively, while transition temperatures are T_t=6, 14 and 6 K for Tb-, Dy- and HoPdIn respectively. TbPdIn reveals an additional transition at 27 K connected with the intermediate ferrimagnetic phase. The critical fields for the magnetization process of the low-temperature phase are high (52 and 150 kOe for TbPdIn and 32 kOe for DyPdIn at T=4.2 K) yet these values decrease remarkably with increasing temperature. Results of the study are compared with magnetic and neutron diffraction data hitherto available. We state that irreversibility of the zero-field cooled–field cooled magnetization is not connected with the spin-glass phase claimed elsewhere.     

On the superconductivity and structural properties of YBa2Cu3 − xCdxO7 − y

A series of superconducting cuprates with the nominal composition YBa₂Cu_3 − xCd_xO_7 − yand the effect of Cd substitution on Cu sites in this compound is presented. X-ray powder diffraction patterns for these cadmium cuprates with reduced diamagnetism indicate an orthorhombic unit cell like-perovskite structure for (0 ≤ x ≤ 0.15), while for higher Cd concentration, i.e.x = 1.0 the material is polyphasic. The observed superconducting transition temperature of the samples is nearly the same ([formula] K), except for (x = 1.0) whereT_cdrops to 72 K and a transition from metallic to semiconducting behavior of the normal state of the resistivity is observed. Such a decrease inT_cfor higher Cd concentration could be attributed to the presence of the green phase in this composition.     

Correlation between structural and superconducting properties of nano-granular disordered Nb thin films

We report on low temperature transport measurements on nano-granular Nb thin films deposited on Si (1 0 0) substrates using DC magnetron sputtering. The superconducting transition temperature (T_c) is found to decrease monotonically with the increase of the lattice parameter (a) irrespective of its thickness and grain size. The superconducting transition temperature is found to depend only on the lattice parameter whereas the normal state resistivity depends both on lattice parameter and the details of the sample morphology. We have modeled this T_c variation with lattice expansion in terms of Debye temperature reduction using Morse potential as the interatomic potential in Nb.     

Increase of critical current density with doping carbon nano-tubes in YBa2Cu3O7−δ

The effects of carbon nano-tubes (CNTs) on the crystal structure and superconducting properties of YBa₂Cu₃O_7?δ (Y-123) compound were studied. Samples were synthesized using standard solid-state reaction technique by adding CNT up to 1 wt% and X-ray diffraction data confirm the single phase orthorhombic structure for all the samples. Current–voltage measurements in magnetic fields up to 9 T were used to study the pinning energy U_J and critical current density J_c as a function of magnetic field at fixed temperature. We find that while T_c does not change much with the CNT doping (91–92 K), both U_J and J_c increase systematically up to 0.7 wt% CNT doping in a broad magnetic field ranges between 0.1 and 9 T and J_c in the 0.7 wt% CNT doped sample is at least 10 times larger than that of the pure Y-123. The scanning electron microscope image shows that CNTs are forming an electrical-network between grains. These observations suggest that the CNT addition to the Y-123-compounds improve the electrical connection between superconducting grains to result in the J_c increase.     

New superconducting RbFe2As2: A first-principles investigation

RbFe₂As₂ has recently been reported to be a bulk superconductor with T_c = 2.6 K in the undoped state, in contrast to undoped BaFe₂As₂ with a magnetic ground state. We present here the results of the first-principles calculations of the structural, elastic and electronic properties for this newest superconductor and discuss its behaviour in relation to other related systems.     

Effect of Cr substitution on the superconducting and magnetic properties of RuSr2Eu1.5Ce0.5Cu2O10−δ

In this paper we investigate the properties of polycrystalline series of Ru_1?xCr_xSr₂Eu_1.5Ce_0.5Cu₂O_10?δ (0.0 ? x ? 0.40) by resistivity, XRD and dc magnetization measurements. EuRu-1222 is a reported magneto superconductor with Ru spins magnetic ordering at temperatures near 100 K and superconductivity occurs in Cu–O₂ planes below T_c ? 40 K. The exact nature of Ru spins magnetic ordering is still being debated and no conclusion has been reached yet. In this work, we found the superconducting transition temperature T_c = 20 K from resistivity and dc magnetization measurements for pristine sample. DC magnetization measurements exhibited ferromagnetic like transition for all samples.     

Inelastic neutron scattering on iron-based superconductor BaFe2(As,P)2

Inelastic neutron scattering has been performed on powder sample of an iron-based superconductor BaFe₂(As_0.65P_0.35)₂ with superconducting transition temperature (T_c) = 30 K, whose superconducting (SC) order parameter is expected to have line node. In the normal state, constant-E scan of dynamical structure factor, S(Q, E), exhibits a peak structure centered at momentum transfer Q ～ 1.20 Å^?1, corresponding to antiferromagnetic wave vector. Below T_c, the redistribution of the magnetic spectral weight takes place, resulting in the formation of a peak at E ～ 12 meV and a gap below 6 meV. The enhanced magnetic peak structure is ascribed to the spin resonance mode, evidencing sign change in the SC order parameter similar to other iron-based high-T_c superconductors. It suggests that fully-gapped s_± symmetry dominates in this superconductor, which gives rise to high-T_c (=30 K) despite the nodal symmetry.     

Point-contact Andreev-reflection spectroscopy in ReFeAsO1−xFx (Re = La,Sm): Possible evidence for two nodeless gaps

A deep understanding of the character of superconductivity in the recently discovered Fe-based oxypnictides ReFeAsO_1?xF_x (Re = rare-earth) necessarily requires the determination of the number of the gaps and their symmetry in k space, which are fundamental ingredients of any model for the pairing mechanism in these new superconductors. In the present paper, we show that point-contact Andreev-reflection spectroscopy experiments performed on LaFeAsO_1?xF_x (La-1111) polycrystals with T_c ～ 27 K and SmFeAsO_0.8F_0.2 (Sm-1111) polycrystals with T_c ～ 53 K gave differential conductance curves exhibiting two peaks at low bias and two additional structures (peaks or shoulders) at higher bias voltages, an experimental situation quite similar to that observed by the same technique in pure and doped MgB₂. The single-band Blonder–Tinkham–Klapwijk model is totally unable to properly fit the conductance curves, while the two-gap one accounts remarkably well for the shape of the whole experimental dI/dV vs. V curves. These results give direct evidence of two nodeless gaps in the superconducting state of ReFeAsO_1?xF_x (Re = La, Sm): a small gap, Δ₁, smaller than the BCS value (2Δ₁/k_BT_c ～ 2.2–3.2) and a much larger gap Δ₂ which gives a ratio 2Δ₂/k_BT_c ～ 6.5–9.0. In Sm-1111 both gaps close at the same temperature, very similar to the bulk T_c, and follow a BCS-like behaviour, while in La-1111 the situation is more complex, the temperature dependence of the gaps showing remarkable deviations from the BCS behaviour at T close to T_c.The normal-state conductance reproducibly shows an unusual, but different, shape in La-1111 and Sm-1111 with a depression or a hump at zero bias, respectively. These structures survive in the normal state up to T¹ ～ 140 K, close to the temperatures at which structural and magnetic transitions occur in the parent, undoped compound.     

In situ characterization of transport properties of superconducting (Cu, C)-system thin films

Transport properties of (Cu, C)Ba₂CuO_x [(Cu, C)-1201] thin films have been characterized by in situ temperature dependence of resistivity, without breaking vacuum from the deposition to the measurement. In in situ transport properties measurements, the obtained results reveal that (Cu, C)Ba₂CuO_x films exhibit T_c > 20 K on the cased of conductivity at 290 K (σ_[290 K]) > 4 × 10² S/cm and temperature coefficient of resistivity (TCR) > 1.5 × 10^?3 K^?1, and doping level of them should be in between under-doped and optimally-doped states. Their results suggest that there would be possible to further increases of T_c, and XPS data suggest that (Cu, C)-system should have the excellent dopability in their charge reservoir and the possibility of low anisotropy.     

Anisotropic vortex pinning in the β-pyrochlore oxide superconductor KOs2O6

Vortex pinning in the β-pyrochlore oxide superconductor KOs₂O₆ with T_c = 9.6 K is investigated by measuring magnetic torque. A large anisotropy of magnetic torque is observed in the superconducting state below T_p = 7.6 K, where a first-order structural transition takes place, in spite of the inherent isotropic nature of the structural and electronic properties. Magnetic torque is enhanced at external magnetic fields parallel to the [1 1 1] and [0 0 1] directions. Moreover, a pronounced peak effect is also observed in the magnetic field dependence of the torque in these two directions. We consider that the observed anisotropy is related to a microstructure associated with the structural transition.     

Thickness dependence of Ic and Jc of LTG-SmBCO coated-conductor on IBAD-MgO tapes

We have reported SmBa₂Cu₃O_y (SmBCO) films on single crystalline substrates prepared by low-temperature growth (LTG) technique. The LTG-SmBCO films showed high critical current densities in magnetic fields compared with conventional SmBCO films prepared by pulsed laser deposition (PLD) method. In this study, to enhance critical current (I_c) in magnetic field, we fabricated thick LTG-SmBCO films on metal substrates with ion-beam assisted deposition (IBAD)-MgO buffer and estimated the I_c and J_c in magnetic fields.All the SmBCO films showed c-axis orientation and cube-on-cube in-plane texture. T_c of the LTG-SmBCO films were 93.1–93.4 K. J_c and I_c of a 0.5 μm-thick SmBCO film were 3.0 MA/cm² and 150 A/cm-width at 77 K in self-field, respectively. Those of a 2.0 μm-thick film were 1.6 MA/cm² and 284 A/cm-width respectively. Although I_c increased with the film thickness increasing up to 2 μm, the I_c tended to be saturated in 300 A/cm-width. From a cross sectional TEM image of the SmBCO film, we recognized a-axis oriented grains and 45° grains and Cu–O precipitates. Because these undesired grains form dead layers, I_c saturated above a certain thickness. We achieved that I_c in magnetic fields of the LTG-SmBCO films with a thickness of 2.0 μm were 88 A/cm-width at 1 T and 28 A/cm-width at 3 T.     

Novel superconducting characteristics and unusual normal-state properties in iron-based pnictide superconductors: 57FeNMR and 75AsNQR/NMR studies in REFeAsO1−y (RE = La,Pr, Nd) and Ba0.6K0.4Fe2As2

We discuss the novel superconducting characteristics and unusual normal-state properties of iron (Fe)-based pnictide superconductors REFeAsO_1?y (RE = La, Pr, Nd) and Ba_0.6K_0.4Fe₂As₂ (T_c = 38 K) by means of ⁵⁷FeNMR and ⁷⁵AsNQR/NMR. In the superconducting state of LaFeAsO_0.7 (T_c = 28 K), the spin component of the ⁵⁷Fe-Knight shift decreases to almost zero at low temperatures, which provide firm evidence of the superconducting state formed by spin-singlet Cooper pairing. The nuclear spin–lattice relaxation rates (1/T₁) in LaFeAsO_0.7 and Ba_0.6K_0.4Fe₂As₂ exhibit a T³-like dependence without a coherence peak just below T_c, indicating that an unconventional superconducting state is commonly realized in these Fe-based pnictide compounds. All these events below T_c are consistently argued in terms of an extended s_±-wave pairing with a sign reversal of the order parameter among Fermi surfaces. In the normal state, 1/T₁T decreases remarkably upon cooling for both the Fe and As sites of LaFeAsO_0.7. In contrast, it gradually increases upon cooling in Ba_0.6K_0.4Fe₂As₂. Despite the similarity between the superconducting properties of these compounds, a crucial difference was observed in their normal-state properties depending on whether electrons or holes are doped into the FeAs layers. These results may provide some hint to address a possible mechanism of Fe-based pnictide superconductors.     

BaT2As2 single crystals (T = Fe,Co, Ni) and superconductivity upon Co-doping

The crystal structure and physical properties of BaFe₂As₂, BaCo₂As₂, and BaNi₂As₂ single crystals are surveyed. BaFe₂As₂ gives a magnetic and structural transition at T_N = 132(1) K, BaCo₂As₂ is a paramagnetic metal, while BaNi₂As₂ has a structural phase transition at T₀ = 131 K, followed by superconductivity below T_c = 0.69 K. The bulk superconductivity in Co-doped BaFe₂As₂ below T_c = 22 K is demonstrated by resistivity, magnetic susceptibility, and specific heat data. In contrast to the cuprates, the Fe-based system appears to tolerate considerable disorder in the transition metal layers. First principles calculations for BaFe_1.84Co_0.16As₂ indicate the inter-band scattering due to Co is weak.     

Reduced crystallization time of YBCO in a fluorine-free MOD process using uv-lamp irradiation

We have studied the crystallization time dependence of the epitaxial YBCO films (t = 0.8 μm) grown on CeO₂-buffered SrTiO₃ substrates by fluorine-free metal–organic deposition using uv-lamp irradiation (uv-MOD). As increasing the time (T₀) for heat treatment at the reaction temperature (760 °C) from 0 to 90 min, J_c and the YBCO 0 0 l XRD intensity are steeply increased and reach their maximum values at T₀ = 10 min. This suggests that the heat treatment required for YBCO crystallization is significantly shortened in uv-MOD compared to conventional all-pyrolytic F-free MOD processes, which consume T₀ = 90–150 min for crystallizing 0.4–0.5-μm-thick films. Scanning electron microscope measurement revealed a drastic change in surface morphology between T₀ = 8 and 10 min, showing a good correspondence to the J_c and XRD data which suggest that the epitaxial growth reaches the film surface at the very early stage in the heat treatment.