Doping effect of Ag nanoparticles on critical current of YBa2Cu3O7−δ bulk superconductor

The objective of this work is to investigate the effect of Ag nanoparticles on critical current of YBa₂Cu₃O_7?δ (YBCO) superconductor. Ag nanoparticles with different particle sizes from 30 to 1000 nm were prepared through the chemical reduction of AgNO₃ in an alcohol solution. Then, samples of YBCO superconductors were doped by 1 and 2 wt.% of Ag nanoparticles with different sizes. Samples were characterized with XRD, SEM and EDX measurements. Critical current measurements were performed using a standard four-probe technique at liquid nitrogen temperature. The results showed by increasing of Ag nanoparticles up to 700 nm the J_c increases, but decreases by further increase in Ag particles size. The critical current enhancement is attributed to the improved connectivity between the grain boundaries and better crystallization of the grains.     

Increase of critical current density with doping carbon nano-tubes in YBa2Cu3O7−δ

The effects of carbon nano-tubes (CNTs) on the crystal structure and superconducting properties of YBa₂Cu₃O_7?δ (Y-123) compound were studied. Samples were synthesized using standard solid-state reaction technique by adding CNT up to 1 wt% and X-ray diffraction data confirm the single phase orthorhombic structure for all the samples. Current–voltage measurements in magnetic fields up to 9 T were used to study the pinning energy U_J and critical current density J_c as a function of magnetic field at fixed temperature. We find that while T_c does not change much with the CNT doping (91–92 K), both U_J and J_c increase systematically up to 0.7 wt% CNT doping in a broad magnetic field ranges between 0.1 and 9 T and J_c in the 0.7 wt% CNT doped sample is at least 10 times larger than that of the pure Y-123. The scanning electron microscope image shows that CNTs are forming an electrical-network between grains. These observations suggest that the CNT addition to the Y-123-compounds improve the electrical connection between superconducting grains to result in the J_c increase.     

Transverse resistance of YBa2Cu3O7−δ single crystals

Measured is the transverse electrical resistance of YBa₂Cu₃O_7−δ single crystals with different oxygen deficiency values (δ) in the temperature range T_c − 300 K. The experimental data are approximated by an empiric expression accounting for the fluctuation conductivity near T_c and the semiconductor-like resistance regime. Our analysis of the concentration dependences of the fitting parameters, in particular, reveals that the resistance temperature dependence is largely affected by the sample's non-homogeneity. The latter, in turn, causes a T_c anisotropy and variable-range hopping conductivity between different phases. The deduced maximal values of the basal-plane coherence length, ξ_xy(0), are comparable with those for low-temperature superconductors.     

Fluctuation-enhanced conductivity and magnetoconductivity of high-quality YBa2Cu3O7−δ crystals

We present measurements of the in-plane resistivity _ab of YBa₂Cu₃O_7– single crystals withT _c 92 K and _ab (100 K)50 cm. The temperature dependence of the fluctuation conductivity and of the magnetoconductivity aboveT _c is analyzed in terms of direct and indirect fluctuation contributions for layered superconductors. The combination of fluctuation conductivity and magnetoconductivity allows to determine both coherence lengths _ab (0) and _c (0) as well as the phase-relaxation time of the pairs in an unequivocal manner. Evidence for clean limit type-II superconductivity in our crystals is given by large values of the mean free pathl _{ab ab} (0).Dedicated to Prof. Dr. F. Hund on the occasion of his 95th birthday     

Thermal and magnetic properties of some YBa2Cu3O7−δ samples

Thermal and magnetic measurements have been performed on several YBa₂Cu₃O_7−δ compounds, some ones showing a large content of high T_c (93 K) superconducting phase. A jump in the specific heat ΔCp, is well evidenced at the transition allowing a determination of the ratio ΔCp/T_c ≅ 23 ± 5. mJ/ (mole Cu)K². In addition, an estimation of the γ value (≅ 11 mJ/(mole Cu). K²) has been drawn from the determination of the electronic entropy at T_c. The samples have been characterized by susceptibility, magnetization and resistivity experiments. The critical field slopes at T_c were found to be dHc₁/dT ≅ 17 Oe/K and dHc₂/dT ≅ 20 kOe/K. The results are discussed in the framework of the Ginzburg-Landau theory.     

Different types of vortex pinning contribution to critical current density in YBa2Cu3O7−δ /YSZ quasi-multilayer

The quasi-multilayer films of YBa₂Cu₃O_7−δ /YSZ (YSZ denotes Yttria Stabilized Zirconia) are prepared by means of pulsed laser deposition (PLD), and a systematic study of the magnetic-field and temperature dependence of the critical current density J _c(H,T) for the YBCO/YSZ quasi-multilayer film is presented. Angular-dependent J _c(H,T) measurements have demonstrated that the growth control strategy is very effective in preventing the vortex motion at high fields and high temperatures. The temperature dependence of isotropic and anisotropic contribution to J _c is investigated in order to evaluate the strength of the defects. It is suggested that at high applied fields (such as 7 T), the pinning contribution of the YBCO/YSZ quasi-multilayer is dominated by the anisotropic disorders, while at intermediate-low fields (such as 1 and 3 T) the pinning contribution is determined by both isotropic and anisotropic disorders.     

The Hubbard model and pressure effects of YBa2Cu3O7−δ superconductors

We apply a mean field approach to the extended Hubbard model on a square lattice to the YBa₂Cu₃O_7−δ family of superconductors under pressure. The parameters of the tight-binding band are taken from experiments, and the coupling strength U and V are estimated by the zero pressure phase diagram (T_c×n_h). This scheme yields the non-trivial dependence of the superconductor critical temperature T_c as a function of the hole concentration n_h in the CuO₂ plane. With the assumption that the pressure P modifies the potential V and the on-plane hole content n_h, we can distinguish the charge transfer and the intrinsic contribution to T_c(P). We show that the changes on T_c(P) for the YBa₂Cu₃O₇ optimally doped compound at low pressures are almost entirely due to the intrinsic term.     

Study of YBa2Cu3O7−δ ceramics/Al interface

Properties of oxide layers at the interface between Al metal and YBa₂Cu₃O_7−δ ceramics were investigated using X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and impedance measurements. There have been found the oriented grains having their c-plane parallel to the surface of YBa₂Cu₃O_7−δ. When Al metal was evaporated onto the ceramics sample, the aluminum oxide layer was produced at the interface between Al and YBa₂Cu₃O_7−δ because Al metal oxidizes more easily. The oxygen-deficiency was observed at the ceramics side of the interface as examined by X-ray photoelectron spectra. This oxygen-deficiency can be partly replenished by post annealing whereas it can be fully replenished for the sample to which the mechanical polishing is applied beforehand in order to remove the oriented grains. The thickness of aluminum oxide layer was evaluated by means of the impedance measurements using the alternating current three-terminal method.     

Model of current and optical conductivity switching in YBa2Cu3O7−x films

A model is proposed for the thermal and electrical responses of films of the high-T _c superconducting material YBa₂Cu₃O7_7−x to current and optical pulses. Numerical calculations are compared with experimental data for current pulses of duration 100 μs and laser pulses of duration 0.1 ns; this yields improved data on the thermal conductivity of thin YBa₂Cu₃O7_7−x films (1.5–2 W/m·K) and thermal resistance of the film-substrate contact (5×10⁻⁸m²·K/W) in the neighborhood of the superconducting transition. This model can be used for optimizing the film structure parameters and control regimes for switching elements for pulses lasting longer than 0.1 ns. Zh. Tekh. Fiz. 69, 77–82 (October 1999)     

Study of magnetic properties of melt textured YBa2Cu3O7−δ with Pt,Ce and Ag dopants

Bulk YBa₂Cu₃O_7−δ samples, doped with PtO₂, Ag₂O, CeO₂ or with a starting mixture of nanosized Y₂O₃, have been prepared by the top seeded melt texturing process. Magnetic measurements have been performed on these samples using VSM and SQUID magnetometer. Critical current densities as a function of the applied magnetic field J_c(B), temperature and field dependent normalized relaxation rates S(T) and S(B), as well as E(J) relationships have been derived. The effects of different dopants on these results have been investigated.     

Nature of contact resistance in high-T c YBa2Cu3O7−δ Superconductors

The contacts between various metals and the high-T_c superconductor YBa₂Cu₃O_7– are characterized by contact resistance,R _c, andI–V measurements from 300 K to 90 K. The contacts with bulk superconductor were made by vacuum deposition. Four metals, Au, Ag, Al, and Bi were investigated. The current transport across the contact is by carrier tunneling. All contacts were ohmic as theirI–V characteristics were symmetrical with respect to current direction.R _c values range between 10^–2 to 10¹ cm² and increase linearly as the temperature is lowered. The contact resistance originates from two distinct physical processes. One is the modification of the carrier concentration at the interface by the contact metal. The second is the nature of carrier injection at the free surface of the superconductor. TheR _c values depend on the contact metal-oxygen interaction parameter signifying the need for oxygen passivation for obtaining low contact resistances.     

Effect of deoxygenation on the weak-link behavior of YBa2Cu3O7−δ superconductors

A systematic study of the weak-link behavior for YBa₂Cu₃O_7−δ polycrystalline samples has been done using the electrical resistivity and AC susceptibility techniques. The experiments were performed with two samples of similar grain, a sample of well-coupled grains, and a deoxygenated sample in such a way that the oxygen mostly comes from the intergrain region. Analysis of the temperature dependence of the AC susceptibility near the transition temperature (T_c) has been done employing Bean's critical state model. The observed variation of intergranular critical current densities (J_c) with temperature indicates that the weak links are changed from superconductor normal–metal superconductor (SNS) for well-coupled samples to superconductor insulator normal–metal–superconductor (SINS) type of junctions for the deoxygenated sample. These results are interpreted in terms of oxygen depletion from grain boundaries, which in turn decreases the intergranular Josephson coupling energy with a concomitant decrease of pinning of the intergranular vortices.     

Far IR transmission spectra of an YBa2Cu3O7−δ thin film

Abstract

The FIR transmission of an YBa₂Cu₃O_7-δ film 1000 Å thick deposited on an MgO plate has been studied from 20 cm^?1 to 4000 cm^?1 at T = 300 K, and at 120 K, 80 K and 7 K. i) The spectra for the normal state are well fitted if a mid-IR oscillator of high strength and high damping is added to the simplest Drude model. ii) The spectra for the superconductive state do not show significant variations of transmission vs. temperature for ω > 120 cm^?1, which should be in agreement with a weak BCS coupling 2Δ = 3.5 kT_c . iii) The FIR transmission at 7 K for ω = 20 cm^?1 is not zero (around 1%) and seems to confirm that the low-temperature perovskite is made of two phases: a superconducting, and a normal one, the proportion of the first one increasing when the film temperature is decreased.     

Local electronic structure of Cu2O,CuO and YBa2Cu3O7−δ

Cu 3d and O 2p electronic states of Cu₂O, CuO, and the highT _c compound YBa₂Cu₃O_7– have been probed by means of high resolution x-ray emission spectroscopy (XES). The CuL and OK XES bands are compared in detail with recently reported x-ray photoelectron and ultraviolet photoelectron spectroscopy (XPS and UPS) measurements and densities of states obtained by local density functional (LDF) theory. The XES data show that the hybridization between Cu 3d and O 2p states is completely modified in CuO and YBa₂Cu₃O_7–, whered-d correlation energy is large, as compared to LDF predictions. Such is not the case for Cu₂O where agreement between theory and experiment is good.The Cu 3d states are found to be highly localized in YBa₂Cu₃O_7– (though less so than in CuO). The O 2p states lie at lower binding energies than in the simpler oxides and are mainly situated above the Cu 3d states. The respective positions of the centre of gravity of the OK emission bands on an x-ray energy scale indicate that the oxygen sites are less well screened by the O 2p states in the highT _c compound. This provides indirect evidence for the presence ofd-like states at the oxygen sites.     

Superlattice structures in solid solution of high-Tc YBa2Cu3O7−δ and (Pb,Cu)Sr2(Ca,Y)Cu2O7−δ superconductors

A complete solid solution range exists between the systems YBa₂Cu₃O_7−δ and (Pb,Cu)Sr₂(Ca,Y)Cu₂O_7−δ has been found with general stoichiometry (Pb_0.75xCu_1−0.75x)(Sr_2xBa_2−2x)(Ca_0.5xY_1−0.5x)Cu₂O_7−δ. Energy dispersive spectrometry and X-ray diffraction identified that a true solid solution exists. Superlattice structures observed by electron diffraction across the solid solution range have a modulation range have a modulation periods along a* which can be varied by altering both the compositional parameter x and the overall oxygen content. The existence of these superlattices infers that the solid solution is non-random and therefore thermodynamically non-ideal. The superconducting transition temperatures, T_c, across the solid solution range are also strongly dependent on the composition, x, but no direct relationship with the modulation period has been established. From these studies it may be concluded that the solid solution between known superconductors is possible, although involving some partial ordering of the lattice, but ordering of cations in the rock-salt to charge reservoir layer is not a significant factor in determining the superconducting properities, which depend more closely on the overall composition and hence on the ability of the charge reservoir layer to transfer charge to the superconducting layers.     

Surface studies on polycrystalline YBa2Cu3O7−δ with Auger electron and low-energy electron energy-loss spectroscopy

Chemical and electronic properties of scrapecleaned YBa₂Cu₃O_7–(YBCO) ceramics, which were also annealed in vacuum or exposed to H atoms or O₂ molecules, were studied at room temperature by applying Auger electron (AES) and low-energy electron energy-loss spectroscopy (LEELS). Scanning electron micrographs showed such scraped surfaces to consist mainly of small, fractured YBCO crystallites, i.e. of clean YBCO surfaces. With only one exception, all low-energy AES lines were found to be shifted in energy compared to data recorded with surfaces of metallic Cu and Y. The analysis of the high-energy AES lines indicated the existence of non-stoichiometric material in grain boundaries. At least 25 different LEELS features were recorded. The 24.9-eV energy loss, which is due to the excitation of bulk valence-electron plasmons, indicates an enhanced oxygen deficit _s 0.8 at scrape-cleaned YBCO surfaces. Annealing of scraped YBCO samples at approximately 700 K in vacuum and also their exposure to hydrogen atoms resulted in an additional oxygen depletion within a few atomic layers near to the surfaces. These oxygen deficiencies were found to increase the intensity ratios of low-and high-energy AES lines of Cu, Ba, and Y and to intensify the energy-loss peak at 4.4 eV which has been attributed to O–Cu–O dumbbells.     

Normal state resistivity of YBa2Cu3O7−x

A systematic study has been carried out on the normal state resistivity of YBa₂Cu₃O_7–x . Samples were cut from the same well-annealed material and were quenched from different temperatures (T _Q ). The resistivity is metallic whenT _Q 500 °C and becomes semiconductor-like whenT _Q 600 °C. The data on the latter was interpreted in terms of the three-dimensional localization model proposed by Mott.The work at USCD was supported by the California MICRO program