Simultaneous Determination of Major Constituents of Honeybee Venom by LC-DAD

The aim of the study was to develop an LC method for honeybee venom analysis, using cytochrome c as an internal standard. The SynChropack C8 6.5 μm, 4.6 × 100 mm column was applied. The bee venom was separated by linear gradient 5–80% B at 30 min (eluent A—0.1% TFA in water, eluent B—0.1% TFA in acetonitrile:water (80:20)). The flow rate of mobile phase was maintained at 1 mL min⁻¹, injection volume: 40 μL, separation temperature: 25 °C. The analysis was monitored at 220 nm. Several honeybee venom constituents were separated and the content of four of them (apamine, mast cell degranulating peptide, phospholipase A₂ and melittin) were determined. By applying this methodology differences in chemical composition of honeybee venom were evaluated. In order to confirm the data obtained, the following steps and parameters were taken into account for the validation of the method: selectivity, precision (injection repeatability, analysis repeatability), accuracy (recovery), linearity and operating range, limit of detection and limit of quantitation. All steps of validation proved that the developed analytical procedure was suitable for its intended purpose (standardization). Due to its simplicity, the developed method can be easily automated and incorporated into routine operations both in the bee venom identification, quality control and assay tests.

     

Simultaneous Determination of Major Constituents of Honeybee Venom by LC-DAD

The aim of the study was to develop an LC method for honeybee venom analysis, using cytochrome c as an internal standard. The SynChropack C8 6.5 μm, 4.6 × 100 mm column was applied. The bee venom was separated by linear gradient 5–80% B at 30 min (eluent A—0.1% TFA in water, eluent B—0.1% TFA in acetonitrile:water (80:20)). The flow rate of mobile phase was maintained at 1 mL min⁻¹, injection volume: 40 μL, separation temperature: 25 °C. The analysis was monitored at 220 nm. Several honeybee venom constituents were separated and the content of four of them (apamine, mast cell degranulating peptide, phospholipase A₂ and melittin) were determined. By applying this methodology differences in chemical composition of honeybee venom were evaluated. In order to confirm the data obtained, the following steps and parameters were taken into account for the validation of the method: selectivity, precision (injection repeatability, analysis repeatability), accuracy (recovery), linearity and operating range, limit of detection and limit of quantitation. All steps of validation proved that the developed analytical procedure was suitable for its intended purpose (standardization). Due to its simplicity, the developed method can be easily automated and incorporated into routine operations both in the bee venom identification, quality control and assay tests.     

New CZE-DAD method for honeybee venom analysis and standardization of the product

The aim of this study was to develop a new precise and accurate CZE-DAD method for honeybee venom analysis using cytochrome c as an internal standard. The 64.5 cm total length, 56 cm effective length, 75 μm ID, and 360 μm OD uncoated fused-silica capillary was used. The samples were injected into the capillary under a 50-mbar pressure for 7 s. There were 15 kV of electric field across the capillary applied. The current intensity was 26 μA. The separation was carried out at 25 °C. The analysis was run with the normal electrode polarity. The following steps and parameters were taken into account for the validation of the developed method: selectivity, precision, accuracy, linearity, limit of detection and limit of quantitation. All steps of the validation procedure proved that the developed analytical procedure was suitable for its intended purpose. Possibly this was the first study in which several honeybee venom components were separated and five of them were identified by capillary zone electrophoresis. In addition, the developed method was applied for quantitative analysis of 38 honeybee venom samples. The content (relative to the dry venom mass) of analyzed peptides in honeybee venom samples collected in 2002–2007 was as follows: apamine from 0.93% to 4.34% (mean, 2.85 ± 0.79%); mast cell degranulating peptide (MCDP) from 1.46% to 4.37% (mean, 2.82 ± 0.64%); phospholipase A₂ from 7.41% to 20.25% (mean, 12.95 ± 3.09%); melittin from 25.40% to 60.27%, (mean, 45.91 ± 9.78%). The results were compared with the experimental data obtained for the same venom samples analyzed earlier by the HPLC method. It was stated that HPCE and HPLC data did not differ significantly and that the HPCE method was the alternative for the HPLC method. Moreover, using the results obtained principal component analysis (PCA) was applied to clarify the general distribution patterns or similarities of four major honeybee venom constituents collected from two different bee strains in various months and years. PCA has shown that the strain of bee appears to be the only criteria for bee venom sample classification. Strong correlations between apamine, MCDP, phospholipase A₂, and melittin were confirmed. These correlations have to be taken into account in the honeybee venom standardization. The developed method due to its simplicity can be easily automated and incorporated into routine operations both in the bee venom identification, quality control, and standardization of the product.     

LC Determination of Five Flavonoid Aglycones in the Tibetan Medicinal Plant Oxytropis falcata Bunge

A simple, efficient and accurate liquid chromatographic method was established to determine five flavonoid aglycones, 7-hydroxy flavonone, pinocembrin, 2′,4′-dihydroxy chalcone, 2′-hydroxy-4′-methoxy chalcone and pinostrobin in the whole plant powder of Oxytropis falcata Bunge. These five compounds were separated on an Agilent Zorbax Eclipse XDB-C₈ column (150 × 4.6 mm, 5 μm). Mobile phases were composed of water containing 0.1% v/v formic acid and acetonitrile using gradient elution. The established method was validated for linearity, accuracy, precision, limit of detection and quantitation, repeatability and stability.

     

Simultaneous quantification of five biogenic amines based on LC–MS/MS and its application in honeybee venom from different subspecies

The use of honeybee venom in traditional medicine is increasing due to its unexpected beneficial effects in the treatment of diseases. In this study, a simple and environmentally friendly sample preparation procedure was developed to quantify five biogenic amines—histamine, 5-hydroxytryptamine, dopamine, adrenaline, and noradrenaline—in honeybee venom using high-performance liquid chromatography tandem mass spectrometry. The instrument and sample preparation method were optimized to achieve stable, sensitive, and accurate quantification of the five biogenic amines. The peak purities of five biogenic amines in bee venom were examined using a diode array detector to ensure that endogenous impurities will not interfere with biogenic amines during the chromatographic separation procedure. The correlation coefficient of each compound was higher than 0.998 in the range of 0.5–1000 ng/mL. The limits of detection and quantification of the developed method ranged between 0.09 and 0.17, and 0.3 and 0.59 μg/g, respectively. The average recoveries of spiked biogenic amines with different concentrations were higher than 70.95%, and the intra- and intermediate-day precisions were lower than 7.51% and 10.17%, respectively. The carry-over between each injection and the stability of the target analytes were also evaluated to ensure the effectiveness of this method. The data obtained are presented in various formats, including boxplot, heat map, and principal component analysis diagram, to visualize the differences in the biogenic amine contents of the honeybee venoms from different subspecies. This method hopes to provide the opportunity to distinguish the bee venom produced by different subspecies.     

Synthesis and characterisation of novel chelating resin for selective preconcentration and trace determination of Pb(II) ions in aqueous samples by innovative microsample injection system coupled flame atomic absorption spectrometry

Expanded polystyrene (EPS) foam waste (white pollutant) was utilised for the synthesis of novel chelating resin i.e. EPS-N = N-α-Benzoin oxime (EPS-N = N-Box). The synthesised resin was characterised by FT-IR spectroscopy, elemental analysis, and thermogravimetric analysis. A selective method for the preconcentration of Pb(II) ions on EPS-N = N-Box resin packed in mini-column was developed. The sorbed Pb(II) ions were eluted with 5.0 mL of 2.0 mol L^?1 HCl and determined by microsample injection system coupled flame atomic absorption spectrometry (MIS-FAAS). The average recovery of Pb(II) ions was achieved 95.5% at optimum parameters such as pH 7, resin amount 400 mg, flow rates 1.0 mL min^?1 (of eluent) and3.0 mL min^?1 (of sample solution). The total saturation capacity of the resin, limit of detection (LOD) and limit of quantification (LOQ) of Pb(II) ions were found to be 30 mg g^?1, 0.033 μg L^?1 and 0.107 μg L^?1, respectively with preconcentration factor of 300. The accuracy, selectivity and validation of the method was checked by analysis of sea water (BCR-403), wastewater (BCR-715) and Tibet soil (NCS DC-78302) as certified reference materials (CRMs). The proposed method was applied successfully for the trace determination of Pb(II) ions in aqueous samples.     

Validated Flow Injection Spectrophotometric Assay for the Quality and Stability Control of Gemfibrozil Tablets

Abstract

A validated flow injection spectrophotometric assay has been developed and optimized for the determination of gemfibrozil in pharmaceutical formulations. The method is based on the direct measurement of the absorbance of the analyte—under flow conditions—in basic medium, at 276 nm. The assay was optimized in terms of sample injection volume and flow rate and validated in terms of linearity, repeatability, detection limit, accuracy, and selectivity. Linear calibration curve was obtained in the range of 20–100 mg l^?1, while the detection limit (1.4 mg l^?1), the repeatability (s _r <1.0%, n=12) and the sampling rate (30 h^?1) were satisfactory. The method was applied successfully to the quality control of one batch (batch no. 052) and the stability control of three batches (batches no. 049–051) of a gemfibrozil‐containing formulation (Prelisin^®, Cosmopharm Ltd, Greece).     

Simultaneous Determination of Dextromethorphan Hydrobromide, Pyrilamine Maleate and Sodium Benzoate in a Cough Cold Syrup by LC

A liquid chromatographic method for the simultaneous determination of dextromethorphan hydrobromide, pyrilamine maleate and sodium benzoate in cough cold syrup has been developed. The method was based on replacing heptane sulfonate by sodium chloride as ion pairing agent. The addition of sodium chloride to the mobile phase has changed the retention behaviour of the basic drugs. The separation of these compounds was achieved in less than 8 min with an isocratic mobile phase consisting of acetonitrile/0.1 M dihydrogenphosphate buffer containing 0.1 M sodium chloride (29:71 v/v) at pH 2.5 and using a Kromasil C18 column. The analysis was performed at a flow rate of 1 mL min^?1 and at a detection wavelength of 220 nm. The selectivity, linearity of calibration, accuracy, within and between days precision, limit of detection and quantification, recovery were examined as parts of the method validation. Calibration curves were linear in the range 1–140 μg mL^?1 with a regression coefficient (R ²) better than 0.999. The results of the method repeatability (intra-day) and reproducibility (inter-day) were all less than 2% (n = 6). The lowest detectable concentration of dextromethorphan hydrobromide and pyrilamine maleate varied between 0.10 and 0.12 μg mL^?1. The proposed liquid chromatographic method was satisfactorily applied for the routine quality control of dextromethorphan hydrobromide, pyrilamine maleate and sodium benzoate in cough cold syrup formulations.     

Simultaneous Determination of Key Osmoregulants in Halophytes Using HPLC–ELSD

Osmoregulants are the substances produced by plants that assist in tolerating environmental stresses. Three commonly analysed osomoregulants include mannitol, betaine and proline. A simple, sensitive and rapid HPLC–ELSD method has been developed for the simultaneous analysis of these common osmoregulants in plant extracts. Osmoregulants were extracted using 80 % ethanol and separated on an NH₂ column using 0.1 % formic acid and acetonitrile as the mobile phase. Retention time repeatability was 0.85, 1.50, and 0.93 % for mannitol, betaine and proline, respectively. The limit of detection (μmol) was 1.43 × 10^?4, 7.81 × 10^?5 and 1.08 × 10^?4 for mannitol, betaine and proline, respectively. The developed method was applied to three different plant extracts, Stylosanthes guianensis, Atriplex cinerea and Rhagodia baccata. A second method using a C18 column with 0.1 % heptafluorobutyric acid and acetonitrile as the mobile phase proved to be a useful complementary method for verifying tentative peak identifications.     

RP-LC-UV Determination of Proanthocyanidins in Guazuma ulmifolia

A simple, reproducible, and efficient liquid chromatographic method was developed with UV detection. Water (0.05% TFA):acetonitrile (0.05% TFA) was used as the mobile phase in a gradient system for the determination of procyanidin B2 (PB2) and epicatechin (EC) in the bark of Guazuma ulmifolia Lam. The analysis was performed using a Phenomenex Gemini RP C₁₈ column (5 μm) as stationary phase, at 30 °C, with a flow rate of 0.8 mL min⁻¹, at a wavelength of 210 nm for detection and determination. The main validation parameters of the method were also determined. Calibration curves were found to be linear, with ranges of 20.00–150.00 (PB2) and 10.00–110.00 μg mL⁻¹ (EC). The correlation coefficients of linear regression analysis were between 0.9981 and 0.9988, and the detection limits were between 2.89 and 2.54 μg mL⁻¹. The contents of PB2 and EC were successfully determined, with satisfactory reproducibility and recovery. Recoveries of the PB2 and EC were 103.00 and 104.01%, respectively. The method was successfully applied to the determination of procyanidins in the bark of G. ulmifolia.

     

Determination of 2,6-di-tert-butylphenol in Irganox 1425

An ion suppression reversed phase high performance liquid chromatography method has been developed for the determination of 2,6-di-tert-butylphenol in Irganox 1425. Separation was carried out on a Welch Material Ultimate XB-C₁₈ column (5 μm, 150 mm × 4.6 mm), using methanol–water (0.1 % HClO₄) (75/25, v/v) mixture as the mobile phase in an isocratic elution. Detection was performed by UV absorption at a wavelength of 275 nm, and the limit of detection was 0.2 μg/mL. The method presented excellent repeatability and precision with both intra- and inter-day relative standard deviations (RSDs) of less than 2.0 %, as well as satisfactory accuracy with the recovery of 98.7–102.3 %, and therefore can be applied for the quality control analysis of Irganox 1425 industrial product.     

Determination of Pyrroloquinoline Quinone in DNA Binding by LC

A simple and repeatable liquid chromatography method with UV detection is described for the determination of pyrroloquinoline quinone in DNA binding studies first. Binding of pyrroloquinoline quinone to DNA was measured indirectly by determining unbound pyrroloquinoline quinone. Pyrroloquinoline quinone was chromatographed on a reversed-phase column using gradient elution with mobile phases of 0.1% trifluoroacetic acid (TFA) in deionized water and 0.1% TFA in acetonitrile at a flow-rate of 0.8 mL min^?1 and detected at 249 nm. The mean content of unbound pyrroloquinoline quinone to three DNA in (hydroxymethyl) aminoethane(Tris–HCl) media were dropped from 99.3 to 80.3% in 250 min, and than to 64.8% at 1200 min, but the binding remained constant in deionized water. The method precision were validated with RSD 1.05 and 0.69% for peak areas and retention times. Validation of the method showed that the assay was linear from 25 to 2,000 μM and 5 to 2,000 μM pyrroloquinoline quinone in Tris–HCl and deionized water, respectively. The accuracy for three concentrations of pyrroloquinoline quinone with different types DNA in two media were within the given range of 80.9–113.6%.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.

     

HPLC for Separation and Quantification of Deoxyribonucleic Acid Fragments and Measurement of Deoxyribonucleic Acid Degradation

DNA quantification has made its mark in pharmaceutical analysis and the life sciences. In particular, in the quality control of nucleic acid drugs and the detection and quantification of genetically modified organisms, evaluation of the DNA degradation rate has become imperative. In this study, by using high-performance liquid chromatography with an anion-exchange column, we established a method for the separation and quantification of DNA fragments in mixed DNA samples. By using a NaCl concentration gradient, DNA fragments in mixed DNA sample were separated well. A calibration curve from 0.05 to 12.4 ng μL^?1 was obtained with high linearity and the correlation coefficient was 0.9999. The limit of detection was 0.02 ng μL^?1 and the limit of quantification was 0.06 ng μL^?1 for S/N = 3 or S/N = 10, respectively. The relative standard deviation was less than 2 % in the measurement of peak area repeatability. The recovery of approximately 1 ng μL^?1 of a specific DNA spiked in a mixed DNA sample was 99.9 ± 3.6 %. The method was able to measure the degradation rate of 600 bp DNA with a variation of approximately 1 %.     

Eluent-Induced Separation of Inorganic Cations in Capillary Liquid Chromatography with Contactless Conductivity Detector

A non-suppressed contactless conductivity detector has been used as a capillary detector in a capillary ion chromatograph, combining a reversed-phase C30 column permanently modified with ionic surfactant. The C30 column (100 × 0.32 mm. id) was modified with sodium dodecyl sulfate (SDS) for the separation of inorganic cations. Monovalent cations could be separated by the proposed system, in which methanesulfonic acid (MSA) and SDS were employed as the mobile phase component, but divalent cations could not be eluted under this condition. As for the case of SDS used as the eluent, an H⁺-cation-exchange column was placed before the sample injector to convert the Na⁺ from the eluent into H⁺, and when the mixture of MSA and dodecyl sulfuric acid was used as the eluent, the retention of cations was improved and baseline separation of the cations was achieved within 23 min. The effect of the eluent composition on the retention behavior of inorganic cations was investigated. The repeatability of retention time and peak height varied from 0.39 to 0.58 and 2.21 to 3.25 % as relative standard deviation, respectively.     

Development and validation of an UHPLC-LTQ-Orbitrap MS method for non-anthocyanin flavonoids quantification in Euterpe oleracea juice

Euterpe oleracea fruits have gained much attention because of their phenolic constituents that have shown potential health benefits. The aim of this work was to quantify the major non-anthocyanin flavonoids (NAF) in the fruit juice by an accurate method coupling ultra-high pressure liquid chromatography with a linear ion trap-high resolution Orbitrap mass spectrometry system (UHPLC-LTQ-Orbitrap MS). Fruits were processed to juice, and then the juice was lyophilized and defatted. The residue was then extracted in the presence of methanol by sonication. The extraction time was optimized and recovery rates of the extraction were >90 %. The extracts were dried and solubilized again in 40 % MeOH, which showed the best compromise for MS detection. For the UHPLC quantification, a HSS C18 column (1.8 μm) was used with a gradient elution of methanol and water both with 0.1 % formic acid. Total error and accuracy profiles were used as validation criteria. Seven compounds and their isomers were successfully separated, including the major NAF. Calibration in the matrix was found to be more accurate than calibration without matrix. Trueness (<15 % relative bias), repeatability, and intermediate precision (<13 % RSD), selectivity, response function, linearity, LOD (ranged from 0.04 to 0.81 μg/mL) and LOQ (0.15–5.78 μg/mL) for 12 compounds were evaluated and the quantification method was validated. Its applicability was demonstrated on real samples from different suppliers. Their qualitative and quantitative profiles were similar and some compounds were for the first time quantified. In addition, eriodictyol was identified for the first time in this fruit along with five other flavonoids for which possible structures were proposed.     

Stability‐indicating HPLC assay for lysine–proline–valine (KPV) in aqueous solutions and skin homogenates

A simple, sensitive and stability‐indicating high‐performance liquid chromatographic (HPLC) assay method was developed and validated for a bioactive peptide, lysine–proline–valine (KPV) in aqueous solutions and skin homogenates. Chromatographic separation was achieved on a reversed phase Phenomenex C₁₈ column (4.6 × 250 mm, packed with 5 µm silica particles) with a gradient mobile phase consisting of 0.1% trifluoroacetic acid (TFA) in water (A) and 0.1% TFA in acetonitrile (B). The proposed HPLC method was validated with respect to accuracy, precision, linearity, repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The calibration curve was linear with a correlation coefficient (r) of 0.9999. Relative standard deviation values of accuracy and precision experiments were <2. The LOD and LOQ of KPV were 0.01 and 0.25 µg/mL, respectively. Under stress conditions (acid, alkali and hydrogen peroxide) KPV yielded lys–pro–diketopiperazine as major degradation product, which was identified by flow injection MS analysis. The developed HPLC method was found to be efficient in separating the active peptide from its degradation products generated under various stress conditions. Also, the validated method was able to separate KPV from other peaks arising from endogenous components of the skin homogenate. Copyright © 2014 John Wiley & Sons, Ltd.     

Label-free optical biosensor for detection and quantification of the non-steroidal anti-inflammatory drug diclofenac in milk without any sample pretreatment

A label-free optical biosensor for detection and quantification of diclofenac in bovine milk has been developed. This was achieved by using reflectometric interference spectroscopy as detection method. In a first step, the immunosensor was developed and optimised in buffer concerning sensitivity, selectivity, stability and reproducibility. By comparing recovery rates—not only the good intra- but also the good inter-chip—reproducibility could be proven. Consequently, the assay was transferred in the more complex matrix milk. By utilising an optimised surface modification and evaluation method, matrix effects could successfully be prevented or circumvented. As a result, the developed immunosensor does not need sample pretreatment at all. By obtaining a limit of detection of 0.112 μg L^?1 (0.108 μg kg^?1), the capability of the developed biosensor is comparable or better than those of standard detection methods. Moreover, the presented biosensor reaches the range of the maximum residue limit (0.1 μg kg^?1) set by the European Union. Thus, for the first time, diclofenac was successfully quantified at relevant levels in milk by using an optical biosensor.     

A Simple Stability Indicating CZE Method for the Analysis of Octreotide Acetate

A simple stability indicating capillary zone electrophoretic method was developed and validated for the analysis of octreotide acetate (OCT-Ac). The best separation was achieved by bare fused silica capillaries (50 μm i.d.; 65.5 cm total and 57.0 cm effective length), phosphate buffer (pH = 3.25; 50 mM), at 32.5 °C. The samples were injected using 50 mbar for 5 s and subjected to the applied voltage of 27.5 kV for separation. The detection was carried out using a PAD at a wavelength of 195 nm. For improving the repeatability of the method, l-histidine was applied as an internal standard. According to the validation results, the method was linear in the concentration range of 3.30–400 μg mL^?1 (correlation coefficient of 0.9996) with a limit of detection of 1.08 μg mL^?1 and a limit of quantification of 3.30 μg mL^?1; accuracy of the method was between 100.4 ± 0.2 and 101.1 ± 0.2 %; intra-assay precision was 0.5–2.6 % and intermediate precision was 1.3–3.2 %. The proposed method was successfully applied for the quantification of OCT-Ac in both a pharmaceutical formulation and force-degraded samples and for the detection and separation of degradation products; besides, the obtained results were used for the evaluation of the degradation kinetics of OCT-Ac under different stress conditions. So, it is concluded that the developed method could be employed as a simple, accurate and precise stability-indicating method in quality control laboratories to assess the quantity and stability of OCT-Ac pharmaceutical products.     

Determination of N-methylcarbamate pesticides using flow injection with photoinduced chemiluminescence detection

A sensitive, economic, rapid and simple method for the determination of four N-methylcarbamate pesticides: methomyl (2.0–80 μg L^?1), aldicarb (5.0–50 μg L^?1), butocarboxim (2.0–60 μg L^?1) and oxamyl (2.0–60 μg L^?1); is reported. It relies on the coupling of photoinduced chemiluminescence (PICL) detection with flow injection (FI) methodology. The automation of FI together with the use of light as a reagent decreased the environmental impact of the analysis. The proposed method was based on the oxidation of these pesticides, previously irradiated on-line with UV light, with cerium(IV), using quinine as a sensitiser. Limits of detection below the legal limits (100 ng L^?1) established by the European Union for drinking waters were obtained without the need of preconcentration steps. A good inter-day reproducibility (1.6–6.4%, n = 5), repeatability (rsd = 2.7 %, n = 25) and high throughput (123 h^?1) were achieved. The method was successfully applied to the determination of methomyl in natural waters with mean recoveries ranging from 90% to 98%.