Nonaqueous CE for Rapid and Sensitive Determination of Matrine and Oxymatrine in Sophora flavescens and Its Medicinal Preparations

A simple, rapid, and sensitive non-aqueous capillary electrophoresis procedure for the quantitative determination of matrine and oxymatrine is established. Optimum separation conditions were obtained when the sample was injected under pressure for 3 s at 50 mbar and separated with the buffer containing 70 mM ammonium acetate, 7.0% (v/v) acetic acid, and 10% (v/v) acetonitrile in methanol medium at 25 kV applied voltage. The analytes were detected at 205 nm. The two alkaloids can be separated within 12 min and quantified with high sensitivity. The method was validated in terms of reproducibility, linearity, and accuracy when applied to the analysis of matrine and oxymatrine in Sophora flavescens and its medicinal preparations.

     

Heterologous Expression of Aldehyde Dehydrogenase in <Emphasis Type="Italic">Lactococcus lactis</Emphasis> for Acetaldehyde Detoxification at Low pH

Aldehyde dehydrogenase (E.C. 1.2.1.x) can catalyze detoxification of acetaldehydes. A novel acetaldehyde dehydrogenase (istALDH) from the non-Saccharomyces yeast Issatchenkia terricola strain XJ-2 has been previously characterized. In this work, Lactococcus lactis with the NIsin Controlled Expression (NICE) System was applied to express the aldehyde dehydrogenase gene (istALDH) in order to catalyze oxidation of acetaldehyde at low pH. A recombinant L. lactis NZ3900 was obtained and applied for the detoxification of acetaldehyde as whole-cell biocatalysts. The activity of IstALDH in L. lactis NZ3900 (pNZ8148-istALDH) reached 36.4 U mL^?1 when the recombinant cells were induced with 50 ng mL^?1 nisin at 20 °C for 2 h. The IstALDH activity of recombinant L. lactis cells showed higher stability at 37 °C and pH 4.0 compared with the crude enzyme. L. lactis NZ3900 (pNZ8148-istALDH) could convert acetaldehyde at pH 2.0 while the crude enzyme could not. Moreover, the resting cells of L. lactis NZ3900 (pNZ8148-istALDH) showed a 2.5-fold higher activity and better stability in catalyzing oxidation of acetaldehyde at pH 2.0 compared with that of Escherichia coli expressing the IstALDH. Taken together, the L. lactis cells expressing recombinant IstALDH are potential whole-cell biocatalysts that can be applied in the detoxification of aldehydes.     

A family of four-step trigonometrically-fitted methods and its application to the schrödinger equation

In this article we present a singularly almost P-stable exponentially-fitted four-step method for the approximate solution of the one-dimensional Schrödinger equation. More specifically we present a method that is singularly almost P-stable (a concept later introduced in this article) and also integrates exactly any linear combination of the functions {1, x, exp ( ±I v x) , x exp ( ±I v x) , x ² exp ( ±I v x)}. The numerical experimentation showed that our method is considerably more efficient compared to well known methods used for the approximate solution of resonance problem of the radial Schrödinger equation.     

Fumaric Acid Production from Alkali-Pretreated Corncob by Fed-Batch Simultaneous Saccharification and Fermentation Combined with Separated Hydrolysis and Fermentation at High Solids Loading

Production of fumaric acid from alkali-pretreated corncob (APC) at high solids loading was investigated using a combination of separated hydrolysis and fermentation (SHF) and fed-batch simultaneous saccharification and fermentation (SSF) by Rhizopus oryzae. Four different fermentation modes were tested to maximize fumaric acid concentration at high solids loading. The highest concentration of 41.32 g/L fumaric acid was obtained from 20 % (w/v) APC at 38 °C in the combined SHF and fed-batch SSF process, compared with 19.13 g/L fumaric acid in batch SSF alone. The results indicated that a combination of SHF and fed-batch SSF significantly improved production of fumaric acid from lignocellulose by R. oryzae than that achieved with batch SSF at high solids loading.     

Simultaneous Determination of Paracetamol and Caffeine in Human Plasma by LC–ESI–MS

A rapid, selective and convenient liquid chromatography–mass spectrometric method for the simultaneous determination of paracetamol and caffeine in human plasma was developed and validated. Analytes and theophylline [internal standard (I.S.)] were extracted from plasma samples with diethyl ether-dichloromethane (3:2, v/v) and separated on a C₁₈ column (150 × 4.6 mm ID, 5 μm particle size, 100 Å pore size). The mobile phase consisted of 0.2% formic acid–methanol (60:40, v/v). The assay was linear in the concentration range between 0.05 and 25 μg mL^?1 for paracetamol and 10–5,000 ng mL^?1 for caffeine, with the lower limit of quantification of 0.05 μg mL^?1 and 10 ng mL^?1, respectively. The intra- and inter-day precision for both drugs was less than 8.1%, and the accuracy was within ±6.5%. The single chromatographic analysis of plasma samples was achieved within 4.5 min. This validated method was successfully applied to study the pharmacokinetics of paracetamol and caffeine in human plasma.     

Microplate-Based Evaluation of the Sugar Yield from Giant Reed,Giant Miscanthus and Switchgrass after Mild Chemical Pre-Treatments and Hydrolysis with Tailored <Emphasis Type="Italic">Trichoderma</Emphasis> Enzymatic Blends

Giant reed, miscanthus, and switchgrass are considered prominent lignocellulosic feedstocks to obtain fermentable sugars for biofuel production. The bioconversion into sugars requires a delignifying pre-treatment step followed by hydrolysis with cellulase and other accessory enzymes like xylanase, especially in the case of alkali pre-treatments, which retain the hemicellulose fraction. Blends richer in accessory enzymes than commercial mix can be obtained growing fungi on feedstock-based substrates, thus ten selected Trichoderma isolates, including the hypercellulolytic strain Trichoderma reesei Rut-C30, were grown on giant reed, miscanthus, or switchgrass-based substrates. The produced enzymes were used to saccharify the corresponding feedstocks, compared to a commercial enzymatic mix (6 FPU/g). Feedstocks were acid (H₂SO₄ 0.2–2%, w/v) or alkali (NaOH 0.02–0.2%, w/v) pre-treated. A microplate-based approach was chosen for most of the experimental steps due to the large number of samples. The highest bioconversion was generally obtained with Trichoderma harzianum Or4/99 enzymes (78, 89, and 94% final sugar yields at 48 h for giant reed, miscanthus, and switchgrass, respectively), with significant increases compared to the commercial mix, especially with alkaline pre-treatments. The differences in bioconversion yields were only partially caused by xylanases (maximum R ² = 0.5), indicating a role for other accessory enzymes.     

Elucidating the Effect of Glycerol Concentration and C/N Ratio on Lipid Production Using <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> SKY7

The high demand for renewable energy and increased biodiesel production lead to the surplus availability of crude glycerol. Due to the above reason, the bio-based value addition of crude glycerol into various bioproducts is investigated; among them, microbial lipids are attractive. The present study was dedicated to find the optimal glycerol concentration and carbon/nitrogen (C/N) ratio to produce maximum lipid using Yarrowia lipolytica SKY7. The glycerol concentration (34.4 to168.2 g/L) and C/N ratio (25 to 150) were selected to investigate to maximize the lipid production. Initial glycerol concentration 112.5 g/L, C/N molar ratio of 100, and with 5 % v/v inoculum supplementation were found to be optimum for biomass and lipid production. Based on the above optimal parameters, lipid concentration of 43.8 % w/w with a biomass concentration of 14.8 g/L was achieved. In the case of glycerol concentration, the maximum Yp/s (0.192 g/g); Yx/s (0.43 g/g) was noted when the initial glycerol concentration was 112.5 g/L with C/N molar ratio 100 and inoculum volume 5 % v/v. The glycerol uptake was also noted to increase with the increase in glycerol concentration. At low C/N ratio, the glycerol consumption was found to be high (79.43 g/L on C/N 25) whereas the glycerol consumption was observed to decrease when the C/N ratio was raised to 150 (40.8 g/L).     

<Emphasis Type="Italic">Hypericum japonicum:</Emphasis> a Double-Headed Sword to Combat Vector Control and Cancer

Weissella cibaria RBA12 produced a maximum of 9 mg/ml dextran (with 90% efficiency) using shake flask culture under the optimized concentration of medium components viz. 2% (w/v) of each sucrose, yeast extract, and K₂HPO₄ after incubation at optimized conditions of 20 °C and 180 rpm for 24 h. The optimized medium and conditions were used for scale-up of dextran production from Weissella cibaria RBA12 in 2.5-l working volume under batch fermentation in a bioreactor that yielded a maximum of 9.3 mg/ml dextran (with 93% efficiency) at 14 h. After 14 h, dextran produced was utilized by the bacterium till 18 h in its stationary phase under sucrose depleted conditions. Dextran utilization was further studied by fed-batch fermentation using sucrose feed. Dextran on production under fed-batch fermentation in bioreactor gave 35.8 mg/ml after 32 h. In fed-batch mode, there was no decrease in dextran concentration as observed in the batch mode. This showed that the utilization of dextran by Weissella cibaria RBA12 is initiated when there is sucrose depletion and therefore the presence of sucrose can possibly overcome the dextran hydrolysis. This is the first report of utilization of dextran, post-sucrose depletion by Weissella sp. studied in bioreactor.     

Ethanol Production from Starch Hydrolyzates using <Emphasis Type="Italic">Zymomonas mobilis</Emphasis> and Glucoamylase Entrapped in Polyvinylalcohol Hydrogel

The glucoamylase from Aspergillus niger, immobilized into poly(vinylalcohol) hydrogel lens-shaped capsules LentiKats®, was used for simultaneous saccharification and fermentation (SSF) with Zymomonas mobilis in free form. This system was stable in both the repeated batch and continuous mode of SSF. The microorganism was found to adsorb on the capsules with immobilized enzyme. This increased the ethanol productivity of the repeated batch system with 5% w/v of immobilized glucoamylase almost 2.1 times (7.2 g l^?1 h^?1) compared to free enzyme–free microorganism system (3.5 g l^?1 h^?1). The continuous SSF with the immobilized glucoamylase (11.5% w/v) tested for 15 days had productivity 10 g l^?1 h^?1, which is comparable to continuous experiments on semi-defined glucose medium (10 g l^?1 h^?1). These two systems were stable in both glucoamylase activity and microorganism productivity.     

Bioethanol Production from Soybean Residue via Separate Hydrolysis and Fermentation

Bioethanol was produced using polysaccharide from soybean residue as biomass by separate hydrolysis and fermentation (SHF). This study focused on pretreatment, enzyme saccharification, and fermentation. Pretreatment to obtain monosaccharide was carried out with 20% (w/v) soybean residue slurry and 270 mmol/L H₂SO₄ at 121 °C for 60 min. More monosaccharide was obtained from enzymatic hydrolysis with a 16 U/mL mixture of commercial enzymes C-Tec 2 and Viscozyme L at 45 °C for 48 h. Ethanol fermentation with 20% (w/v) soybean residue hydrolysate was performed using wild-type and Saccharomyces cerevisiae KCCM 1129 adapted to high concentrations of galactose, using a flask and 5-L fermenter. When the wild type of S. cerevisiae was used, an ethanol production of 20.8 g/L with an ethanol yield of 0.31 g/g consumed glucose was obtained. Ethanol productions of 33.9 and 31.6 g/L with ethanol yield of 0.49 g/g consumed glucose and 0.47 g/g consumed glucose were obtained in a flask and a 5-L fermenter, respectively, using S. cerevisiae adapted to a high concentration of galactose. Therefore, adapted S. cerevisiae to galactose could enhance the overall ethanol fermentation yields compared to the wild-type one.     

Study of the growth of <Emphasis Type="Italic">Enterococcus faecalis</Emphasis>, <Emphasis Type="Italic">Escherichia coli</Emphasis> and their mixtures by microcalorimetry

In a majority of environments, microbes live as interacting communities. Microbial communities are composed of a mix of microbes with often unknown functions. Polymicrobial diseases represent the clinical and pathological manifestations induced by the presence of multiple infectious agents. These diseases are difficult to diagnose and treat and usually are more severe than monomicrobial infections. The interaction relationship between Enterococcus faecalis and Escherichia coli was researched using a Calvet calorimeter. Three mixtures of both bacteria were prepared in the following proportions: 20 + 80 % (0.2 mL E. faecalis + 0.8 mL E. coli), 50 + 50 % (0.5 mL E. faecalis + 0.5 mL E. coli) and 80 + 20 % (0.8 mL E. faecalis + 0.2 mL E. coli). Experiments were carried out at concentration of 10⁶ CFU mL^?1 and a constant temperature of 309.65 K. The differences in shape of graph of E. faecalis, E. coli and their mixtures were compared. Also, the thermokinetic parameters such as detection time (t _d), growth constant (k), generation time (G) and the amount of heat released (Q) were calculated.     

Optimization of Levan Production by Cold-Active <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> ANT 179 and Fructooligosaccharide Synthesis by Its Levansucrase

Fructooligosaccharides (FOS) and levan attract much attention due to a wide range of applications in food technology and pharmaceutical and cosmetic industry. Bacillus licheniformis ANT 179, isolated from Antarctica soil, produced levansucrase and levan in a medium containing sucrose as carbon substrate. In this study, characterization of levansucrase and production of short-chain FOS and levan were investigated. Temperature and pH optimum of the enzyme were found to be 60 °C and pH 6.0, respectively. The optimization of fermentation conditions for levan production using sugarcane juice by response surface methodology (RSM) was carried out. Central composite rotatable design was used to study the main and the interactive effects of medium components: sugarcane juice and casein peptone concentration on levan production by the bacterium. The optimized medium with sugarcane juice at 20 % (v/v) and casein peptone at 2 % (w/v) was found to be optimal at an initial pH of 7.0 and incubation temperature of 35 °C for 48 h. Under these conditions, the maximum levan concentration was 50.25 g/L on wet weight basis and 16.35 g/L on dry weight basis. The produced inulin type FOS (kestose and neokestose) and levan were characterized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) analysis. The study revealed that the levansucrase could form FOS from sucrose. The locally available low-cost substrate such as sugarcane juice in the form of a renewable substrate is proposed to be suitable even for scale-up production of enzyme and FOS for industrial applications. The levan and FOS synthesized by the bacterium are suitable for food applications and biomedical uses as the bacterium has GRAS status and devoid of endotoxin as compared to other Gram-negative bacteria.     

A comparison of energy changes accompanying growth processes by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Calculations are made using the equations Δ_r G = Δ_r H ? TΔ_r S and Δ_r X = Δ_r H ? Δ_r Q where Δ_r X represents the free energy change when the exchange of absorbed thermal energy with the environment is represented by Δ_r Q. The symbol Q has traditionally represented absorbed heat. However, here it is used specifically to represent the enthalpy listed in tabulations of thermodynamic properties as (H _T  ? H ₀) at T = 298.15 K, the reason being that for a given substance TS equals 2.0 Q for solid substances, with the difference being greater for liquids, and especially gases. Since Δ_r H can be measured, and is tangibly the same no matter what thermodynamics are used to describe a reaction equation, a change in the absorbed heat of a biochemical growth process system as represented by either Δ_r Q or TΔ_r S would be expected to result in a different calculated value for the free energy change. Calculations of changes in thermodynamic properties are made which accompany anabolism; the formation of anabolic, organic by-products; catabolism; metabolism; and their respective non-conservative reactions; for the growth of Saccharomyces cerevisiae using four growth process systems. The result is that there is only about a 1% difference in the average quantity of free energy conserved during growth using either Eq. 1 or 2. This is because although values of TΔ_r S and Δ_r Q can be markedly different when compared to one another, these differences are small when compared to the value for Δ_r G or Δ_r X.     

Activation and Stabilization of Olive Recombinant 13-Hydroperoxide Lyase Using Selected Additives

The stabilization of olive recombinant hydroperoxide lyases (rHPLs) was investigated using selected chemical additives. Two rHPLs were studied: HPL full-length and HPL with its chloroplast transit peptide deleted (matured HPL). Both olive rHPLs are relatively stable at 4 °C, and enzyme activity can be preserved (about 100% of the rHPL activities are maintained) during 5 weeks of storage at ?20 or at ?80 °C in the presence of glycerol (10%, v/v). Among the additives used in this study, glycine (2.5% w/v), NaCl (0.5 M), and Na₂SO₄ (0.25 M) provided the highest activation of HPL full-length activity, while the best matured HPL activity was obtained with Na₂SO₄ (0.25 M) and NaCl (1 M). Although the inactivation rate constants (k) showed that these additives inactivate both rHPLs, their use is still relevant as they strongly increase HPL activity. Results of C6-aldehyde production assays also showed that glycine, NaCl, and Na₂SO₄ are appropriate additives and that NaCl appears to be the best additive, at least for hexanal production.     

Synthesis,spectroscopic characterization,crystal structures,and theoretical studies of (<Emphasis Type="Italic">E</Emphasis>)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone and (<Emphasis Type="Italic">E</Emphasis>)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone

Two thiosemicarbazones, (E)-2-(2,4-dimethoxybenzylidene)thiosemicarbazone (24-MBTSC (1)) and (E)-2-(2,5-dimethoxybenzylidene)thiosemicarbazone (25-MBTSC (2)), derived from 2,4-dimethoxybenzaldehyde and 2,5-dimethoxybenzaldehyde, respectively, with thiosemicarbazide have been synthesized and their structures were characterized by elemental analyses, FT-IR, ¹H NMR spectroscopy, and X-ray single-crystal diffraction analysis. Molecular orbital calculations have been carried out for 1 and 2 by using an ab initio method (HF) and also density functional method (B3LYP) at 6-31G basis set. Compound 1 crystallizes in the monoclinic system, space group P2₁/c, with a = 8.1342(5) Å, b = 18.1406(10) Å, c = 8.2847(6) Å, β = 109.7258(17)°, V = 1150.75(12) Å³, and Z = 4, whereas compound 2 crystallizes in the orthorhombic system, space group Pbca, with a = 11.0868(6) Å, b = 13.1332(6) Å, c = 15.9006(8) Å, V = 2315.2(2) Å³, and Z = 8. The compounds 1 and 2 displays a trans-configuration about the C=N double bond.     

Effective Utilization of Carbohydrate in Corncob to Synthesize Furfuralcohol by Chemical–Enzymatic Catalysis in Toluene–Water Media

In this study, carbohydrates (cellulose plus hemicellulose) in corncob were effectively converted furfuralcohol (FOL) via chemical–enzymatic catalysis in a one-pot manner. After corncob (2.5 g, dry weight) was pretreated with 0.5 wt% oxalic acid, the obtained corncob-derived xylose (19.8 g/L xylose) could be converted to furfural at 60.1% yield with solid acid catalyst SO₄ ^2?/SnO₂-attapulgite (3.6 wt% catalyst loading) in the water–toluene (3:1, v/v) at 170 °C for 20 min. Moreover, the oxalic acid-pretreated corncob residue (1.152 g, dry weight) was enzymatically hydrolyzed to 0.902 g glucose and 0.202 g arabinose. Using the corncob-derived glucose (1.0 mM glucose/mM furfural) as cosubstrate, the furfural liquor (48.3 mM furfural) was successfully biotransformed to FOL by recombinant Escherichia coli CCZU-A13 cells harboring an NADH-dependent reductase (SsCR) in the water-toluene (4:1, v/v) under the optimum conditions (50 mM PEG-6000, 0.2 mM Zn²⁺, 0.1 g wet cells/mL, 30 °C, pH 6.5). After the bioreduction for 2 h, FAL was completely converted to FOL. The FOL yield was obtained at 0.11 g FOL/g corncob. Clearly, this one-pot synthesis strategy shows high potential application for the effective synthesis of FOL.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.     

Quantitative Analysis of Phenolic Acids in Extracts Obtained from the Fruits of Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap

Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap. are, in common with all species belonging to the Apiaceae family, rich in coumarins and essential oils. Phenolic acids also present in the plant are very important pharmacologically, because of their broad spectrum of biological activity. A simple high-performance liquid chromatographic method has been developed for separation and quantitative analysis of the major phenolic acids in extracts obtained from the fruits of P. alsaticum and P. cervaria. Soxhlet extraction, ultrasound extraction, and accelerated solvent extraction under different conditions were used to find the most efficient extraction conditions. Optimum chromatographic performance was obtained with a C₁₈ column and acetonitrile—1% (v/v) aqueous acetic acid as mobile phase. Ferulic, p-coumaric, caffeic, vanillic, syringic, p-hydroxybenzoic, protocatechuic, chlorogenic, and gallic acids were investigated in the fruits of the plants. For all calibration plots linearity was good (R ² > 0.9991) in the ranges tested. The highest yields of most of the phenolic acids were achieved by use of accelerated solvent extraction. The predominant phenolic acid in the fruits of both plants was chlorogenic acid. The amounts, which depended on the method of extraction, were approximately 146 ± 1.616 and 109.92 ± 3.405 mg per 100 g dry weight for P. cervaria and P. alsaticum, respectively.     

Enzymatic Hydrolysis of Black Liquor Xylan by a Novel Xylose-Tolerant,Thermostable β-Xylosidase from a Tropical Strain of <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> CBS 135684

From three cell-associated β-xylosidases produced by Aureobasidium pullulans CBS 135684, the principal enzyme was enriched to apparent homogeneity and found to be active at high temperatures (60–70 °C) over a pH range of 5–9 with a specific activity of 163.3 units (U) mg^?1. The enzyme was thermostable, retaining over 80% of its initial activity after a 12-h incubation at 60 °C, with half-lives of 38, 22, and 10 h at 60, 65, and 70 °C, respectively. Moreover, it was tolerant to xylose inhibition with a K _i value of 18 mM. The K _m and V _max values against p-nitrophenyl-β-d-xylopyranoside were 5.57 ± 0.27 mM and 137.0 ± 4.8 μmol min^?1 mg^?1 protein, respectively. When combining this β-xylosidase with xylanase from the same A. pullulans strain, the rate of black liquor xylan hydrolysis was significantly improved by up to 1.6-fold. The maximum xylose yield (0.812 ± 0.015 g g^?1 dry weight) was obtained from a reaction mixture containing 10% (w/v) black liquor xylan, 6 U g^?1 β-xylosidase and 16 U g^?1 xylanase after incubation for 4 h at 70 °C and pH 6.0.     

Toxicity of <Emphasis Type="Italic">Camellia sinensis</Emphasis>-Fabricated Silver Nanoparticles on Invertebrate and Vertebrate Organisms: Morphological Abnormalities and DNA Damages

Our understanding of nanoparticle toxicity and fate in the aquatic environment is still patchy. In the present study, the toxicity of silver nanoparticles coated by Camellia sinensis (Cs) leaf extract metabolites (Cs-AgNPs) was investigated in comparison with C. sinensis leaf extract and AgNO₃ on a micro-crustacean, Ceriodaphnia cornuta, and a fish Poecilia reticulata. 100% mortality of C. cornuta was observed post-exposure to AgNO₃ (40 µg/ml) if compared to the Cs leaf extract and Cs-AgNPs, showing 30 and 56% mortality at the same concentration, respectively. In P. reticulata 100% mortality was observed testing AgNO₃ and Cs-AgNPs post-exposure to 1 and 30 µg/ml, respectively. Light microscopy and CLSM images showed the accumulation of nanoparticles in the intestine of C. cornuta treated with Cs-AgNPs at 40 µg/ml. In addition, histological observations confirmed the abnormal tissue texture in nanoparticle-exposed P. reticulata, if compared to control fishes. Furthermore, C. cornuta and P. reticulata treated with Cs-AgNPs showed DNA damages compared to the control. Overall, these findings indicated relevant limits about the employ of silver-based pesticides in the environment, and also pointed out the Cs-AgNPs were less toxic to C. cornuta and P. reticulata if compared to silver ions.