Paper chromatography of fatty acids and halogenated organic acids

A paper chromatographic method is described for the identification of the volatile fatty acids and some of their bromo- and iodo-derivatives. Some new spraying reagents are suggested which enable the different classes of acids to be detected in presence of one another.     

Development of frozen whale blubber and liver reference materials for the measurement of organic and inorganic contaminants

Summary Fresh frozen homogenates of pilot whale blubber and liver tissue were prepared for use as control materials for the determination of organic and inorganic contaminants in marine mammal tissue analyses. The blubber material was analyzed to determine 30 polychlorinated biphenyl congeners and 16 chlorinated pesticides using gas chromatography with electron capture detection and gas chromatographymass spectrometry. A total of 39 trace elements and methylmercury were determined in the liver homogenate using instrumental neutron activation analysis, voltammetry, and cold vapor atomic absorption spectroscopy. The preparation and analysis of these two tissue materials are part of the development of marine mammal tissue reference materials.     

X-ray fluorescence determination of bromine in halogenated organic compounds using quasisolid emitters

A series of quasi-solid emitters is proposed for the X-ray fluorescence determination of bromine in different bromine-containing compounds. It is shown that sucrose-based glasses are the best emitters for analyzing alkali solutions of halogenated organic compounds, saccharose-based glasses and polymer films are best for analyzing powder samples, and organic gels offer most promise for analyzing liquid (at normal conditions) samples. It is noted that the proposed method can expand the possibilities of commercially produced element analyzers, which are currently intended for determining only C, H, O, N, and S in organic compounds and cannot be used for determining halogens.     

Development of botanical and fish oil standard reference materials for fatty acids

As part of a collaboration with the National Institutes of Health’s Office of Dietary Supplements and the Food and Drug Administration’s Center for Drug Evaluation and Research, the National Institute of Standards and Technology has developed Standard Reference Material (SRM) 3274 Botanical Oils Containing Omega-3 and Omega-6 Fatty Acids and SRM 3275 Omega-3 and Omega-6 Fatty Acids in Fish Oil. SRM 3274 consists of one ampoule of each of four seed oils (3274-1 Borage (Borago officinalis), 3274-2 Evening Primrose (Oenothera biennis), 3274-3 Flax (Linium usitatissimum), and 3274-4 Perilla (Perilla frutescens)), and SRM 3275 consists of two ampoules of each of three fish oils (3275-1 a concentrate high in docosahexaenoic acid, 3275-2 an anchovy oil high in docosahexaenoic acid and eicosapentaenoic acid, and 3275-3 a concentrate containing 60 % long-chain omega-3 fatty acids). Each oil has certified and reference mass fraction values for up to 20 fatty acids. The fatty acid mass fraction values are based on results from analyses using gas chromatography with flame ionization detection (GC-FID) and mass spectrometry (GC/MS). These SRMs will complement other reference materials currently available with mass fractions for similar analytes and are part of a series of SRMs being developed for dietary supplements.

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Determination of organic acids in Vaccinium berry standard reference materials

Nine organic acids (citric acid, galacturonic acid, glycolic acid, isocitric acid, malic acid, oxalic acid, quinic acid, shikimic acid, and tartaric acid) and two anions (phosphate and sulfate) were determined in a suite of Vaccinium berry-containing dietary supplement standard reference materials (SRMs). Following solvent extraction, three independent methods were utilized in the quantification of these compounds. The first method involved reversed-phase liquid chromatography with ultraviolet absorbance detection at 210 nm and isotope dilution mass spectrometry. The second method utilized ion chromatography with conductivity detection. Finally, gas chromatography with isotope dilution mass spectrometry detection was used following derivatization with N-methyl-N-trifluoroacetamide (MSTFA). The combined data from these methods was used for the assignment of organic acid levels in the seven candidate SRMs.     

Colorimetric determination of organic compounds by formation of hydroxamic acids

Carboxylic acids, their chlorides, anhydrides, esters, lactones, amides, lactams and imides react with hydroxylamine to give hydroxamic acids which are then treated with iron(III). Other compounds or groups of compounds can also be determined after a prior conversion into hydroxylamine-reactive derivatives. The calorimetric applications of these reactions are reviewed. The effect of various factors is discussed. A selective procedure for determination of acid chlorides and anhydrides and an improved procedure for determination of carboxylic esters and lactones are presented.     

Standard reference materials (SRMs) for determination of organic contaminants in environmental samples

For the past 25 years the National Institute of Standards and Technology (NIST) has developed certified reference materials (CRMs), known as standard reference materials (SRMs), for determination of organic contaminants in environmental matrices. Assignment of certified concentrations has usually been based on combining results from two or more independent analytical methods. The first-generation environmental-matrix SRMs were issued with certified concentrations for a limited number (5 to 10) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Improvements in the analytical certification approach significantly expanded the number and classes of contaminants determined. Environmental-matrix SRMs currently available include air and diesel particulate matter, coal tar, marine and river sediment, mussel tissue, fish oil and tissue, and human serum, with concentrations typically assigned for 50 to 90 organic contaminants, for example PAHs, nitro-substituted PAHs, PCBs, chlorinated pesticides, and polybrominated diphenyl ethers (PBDEs). Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Radiation induced decomposition of halogenated organic compounds in water

Decomposition by ionizing radiations of p-chlorophenol and tetrachloroethylene in synthetic water samples at about 2 mg Cl L⁻¹, has been studied on laboratory-scale experiments. Bicarbonate/carbonate and nitrate ions, at two concentration levels (20 and 200 mg HCO₃⁻¹ and 1 and 50 mg NO₃⁻L⁻) were added to synthetic samples in order to evaluate their influence on decomposition yield. At 5 kGy γ dose level, a quantitative degradation of p-chlorophenol is obtained whereas only qualitative consideration can be drawn on tetracholoroethylene. Comparative study with respect to degradation of p-cholophenol solutions (about 2 mg Cl L⁻¹) by γ-rays and electron beam irradiation treatment at 0.5 kGy dose level, are in progress; preliminary results indicate that irradiation with γ-rays seems to be more efficient in terms of removal efficiency respect to electron beams source.     

The use of reference materials in the fossil fuels quality control

The determination of trace elements in fossil fuels is of primary importance to achieve correct evaluation of environmental impact of power plants. The characterization of coals and fuel oils can be carried out by several analytical techniques such as ICP-MS, FI-HG-AAS, ETA-AAS, ICP-AES and XRF. The accuracy of the analysis, done to routine basis, can be systematically checked by means of the reference materials available or comparing the results obtained by different techniques. Quality control activities in the field of trace element determination in fossil fuels (coal and fuel oil) are described. The determination of As, Hg and Se in coals was carried out by different techniques (NAA, FI-HG-AAS and FI-ICP-MS) together with the determination of several trace metals in residual fuel oils by NAA, ETA-AAS and ICP-MS. The use of certified reference materials in order to check the accuracy of procedures is discussed and the results obtained for NIST 1632a and NIST 1632b (coal samples) and NIST 1634b and NIST 1619 (fuel oil samples) are reported.     

Quality control with CRMs for trace element determination in candidate reference materials

Summary Three soil samples and five candidate materials of biological origin (bovine muscle, bovine kidney, bovine blood, rye flour and wheat flour) and one already certified RM (Bovine Liver, 12-02-01) were analyzed for their contents of Cd, Cu, Cr, Pb and Zn. Pressure digestion with nitric acid in PTFE (at 180°C) and quartz (at 290°C) vessels was used for sample decomposition. The measurements were made by graphite furnance atomic absorption spectrometry (ET-AAS), inductively coupled plasma atomic emission spectrometry (ICP-AES) and square wave voltammetry. The accuracy of analysis has been checked by simultaneous analyses of six similar CRMs. An excellent agreement between the found and certified values is illustrated by highly significant correlations.     

On the use of nitrite in the determination of halogen in organic compounds

Summary A few properties of nitrite are cited which are useful for the determination of halogens and perhaps also of sulfur in organic compounds. Procedures using this reagent for the determination of chlorine and bromine in ordinary organic compounds and compounds containing mercury, using flask combustion, and a procedure for microdetermination of chlorine and bromine using combustion and subsequent hydrogenation are described.

---

Zusammenfassung Einige Eigenschaften des Nitrits werden erwähnt, die es für die Bestimmung der Halogene und möglicherweise auch des Schwefels in organischen Verbindungen geeignet erscheinen lassen. Arbeitsvorschriften für die Verwendung dieses Reagens bei der Bestimmung von Chlor und Brom in gewöhnlichen organischen Verbindungen und Organo-Quecksilberverbindungen mit Hilfe der Kolbenverbrennung werden beschrieben. Ebenso wird auch ein Verfahren zur Mikrobestimmung von Chlor und Brom durch Verbrennung und nachfolgende Hydrierung angegeben.

---

Résumé L'auteur cite quelques propriétés des nitrites qui sont utiles pour la détermination des halogènes et peut être également du soufre dans les composés organiques. Il décrit des techniques de détermination du chlore et du brome dans les composés organiques courants et dans les composés contenant du mercure par combustion en fiole, et une technique de microdosage du chlore et du brome par combustion suivie d'hydrogénation, dans lesquelles ce réactif est utilisé.

     

The titrimetric determination of carbon dioxide with special reference to the determination of carbon in organic compounds

The titrimetric barium carbonate method for the determination of. carbon in organic compounds has been examined and the various sources of error are discussed. The carbon dioxide from the combustion of the sample is absorbed in excess baryta containing 20% (w/v) barium chloride and the excess is back-titrated with hydrochloric acid in the presence of o-cresolphthalein indicator.The value of this method in conjunction with the previously described determination of water with succinyl chloride, for the simultaneous determination of carbon and hydrogen is assessed     

Spiro linked compounds for use as active materials in organic light emitting diodes

Spiro-linkage of low molecular weight entities as a new structural concept for the design of new active materials for electroluminescent applications is presented. These spiro linked compounds result in nonpolymeric organic glasses with high thermal stability as can be derived from their high glass transition temperatures (T_g), and characterized by differential scanning calorimetry. Blue emitters based on spiro linked oligophenyles are presented. These compounds are soluble in common organic solvents and show high photoluminescence quantum efficiency in the solid state and high morphologic stability with glass transition temperatures up to 250°C. Charge transport materials based on spiro linked versions of 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) for electron transport, and spiro linked versions of triphenyldiamin derivatives (TPD) for hole transport show improved morphologic properties with nearly unchanged electronic properties compared to the parent compounds. High quality amorphous films can be prepared with the spiro compounds by vapor deposition as well as by simple spin coating.     

Microdetermination of chlorine or bromine in highly halogenated organic compounds

The microdetermination of chlorine or bromine in highly halogenated com pounds is described. The oxygen flask is used for aromatic, aliphatic and liquid sam ples with high halogen contents. A microfusion method for some of these compounds is also discussed. As many compounds as possible covering different structures were analysed. Satisfactory results were obtained.     

Catalysts for the determination of oxygen in organic compounds

Summary Thermal decomposition of metal-organic complexes of nickel, cobalt and iron has given catalysts which are very effective at about 900° for the conversion of carbon dioxide, water and other oxygencontaining sample decomposition products to carbon monoxide in the direct determination of oxygen in organic compounds when using a modified Unterzaucher type apparatus. A copper catalyst similarly prepared required a temperature of 1030° whereas a manganese complex decomposition product was ineffective.

---

Katalysatoren zur Sauerstoffbestimmung in organischen Substanzen

Zusammenfassung Durch thermische Zersetzung metallorganischer Komplexe von Ni, Co und Fe erhält man Katalysatoren, die die Umwandlung von CO₂, H₂O und anderen sauerstoffhältigen Zerfallsprodukten zu CO bei etwa 900° C bei der direkten Sauerstoffbestimmung in einer modifizierten Unterzaucher-Apparatur sehr wirksam fördern. Ein ähnlich hergestellter Cu-Katalysator erfordert 1030° C und das Zersetzungsprodukt eines Mn-Komplexes ist unwirksam.

     

Automated measurement and calibration of reactive volatile halogenated organic compounds in the atmosphere

The automated calibration and analysis of very low mixing ratios of the reactive volatile organic halocarbons CH(3)I, CHCl(3), C(2)H(5)I, 2-C(3)H(7)I, CH(2)Br(2), CH(2)ClI, CHBr(2)Cl, 1-C(3)H(7)I, CH(2)BrI, CHBr(3) and CH(2)I(2) for long term atmospheric field measurements are described. Analytes were pre-concentrated from 3 l of air onto an adsorbent trap cooled to -10 [degree]C using Peltier plates, and rapidly transferred to a gas chromatograph (GC) by resistive heating. A two stage Carboxen 1016/Carbotrap C adsorbent trap allowed good analyte recovery and rapid desorption without the need for post-desorption cryofocussing. Halocarbons were detected using a mass spectrometer (MS) in selective ion mode. Detection limits were between 0.02 and 0.12 pptv (parts per trillion by volume) for approximately hourly samples of CHCl(3), CH(3)I, C(2)H(5)I, 1-C(3)H(7)I, 2-C(3)H(7)I, CH(2)ClI, CH(2)Br(2), CHBr(2)Cl, CH(2)BrI, CHBr(3) and CH(2)I(2) with a precision of 3-8%. A novel calibration system was constructed which utilised fixed volume (50 [micro sign]l) injections of the output of thermostatted permeation tubes into a stream of nitrogen gas in order to dilute parts per million by volume (ppmv) mixing ratios into pptv. The calibration was completely automated, allowing multi-point calibrations during routine operation. The overall accuracy of the measurements is estimated to be +/-15%. The instrument was used continuously for automated atmospheric measurements during a 4-month research cruise from Germany to Antarctica, and a 6 week field campaign at Mace Head, Ireland. The results for CHCl(3) during the latter campaign were within 13% of measurements made by a GC-MS operating continuously at the site within the long term Advanced Global Atmospherics Gases Experiment.     

Three new mussel tissue standard reference materials (SRMs) for the determination of organic contaminants

Three new mussel tissue standard reference materials (SRMs) have been developed by the National Institute of Standards and Technology (NIST) for the determination of the concentrations of organic contaminants. The most recently prepared material, SRM 1974b, is a fresh frozen tissue homogenate prepared from mussels (Mytilus edulis) collected in Boston Harbor, Massachusetts. The other two materials, SRMs 2977 and 2978, are freeze-dried tissue homogenates prepared from mussels collected in Guanabara Bay, Brazil and Raritan Bay, New Jersey, respectively. All three new mussel tissue SRMs complement the current suite of marine natural-matrix SRMs available from NIST that are characterized for a wide range of contaminants (organic and inorganic). SRM 1974b has been developed to replace its predecessor SRM 1974a, Organics in Mussel Tissue, for which the supply is depleted. Similarly, SRMs 2977 and 2978 were developed to replace a previously available (supply depleted) freeze-dried version of SRM 1974a, SRM 2974, Organics in Freeze-Dried Mussel Tissue. SRM 1974b is the third in a series of fresh frozen mussel tissue homogenate SRMs prepared from mussels collected in Boston Harbor starting in 1988. SRM 1974b has certified concentration values for 22 polycyclic aromatic hydrocarbons (PAHs), 31 polychlorinated biphenyl congeners (PCBs), and 7 chlorinated pesticides. Reference values are provided for additional constituents: 16 PAHs, 8 PCBs plus total PCBs, 6 pesticides, total extractable organics, methylmercury, and 11 trace elements. PAH concentrations range from about 2 ng g^–1 dry mass (cyclopenta[cd]pyrene) to 180 ng g^–1 dry mass (pyrene). PCB concentrations range from about 2 ng g^–1 dry mass (PCB 157) to 120 ng g^–1 dry mass (PCB 153). The reference value for total PCBs in SRM 1974b is (2020 ± 420) ng g^–1 dry mass. Pesticide concentrations range from about 4 ng g^–1 dry mass (4,4-DDT) to 40 ng g^–1 dry mass (4,4-DDE). SRM 2977 has certified values for 14 PAHs, 25 PCB congeners, 7 pesticides, 6 trace elements, and methylmercury. Reference values for 16 additional PAHs and 9 inorganic constituents are provided, and information values are given for 23 additional trace elements. SRM 2978 has certified and reference concentrations for 41 and 22 organic compounds, respectively, and contains contaminant levels similar to those of SRM 1974b. Organic contaminant levels in SRM 2977 (mussels from Guanabara Bay, Brazil) are typically a factor of 2 to 4 lower than those in SRM 1974b and SRM 2978. The organic contaminant concentrations in each new mussel tissue SRM are presented and compared in this paper. In addition, a chronological review of contaminant concentrations associated with mussels collected in Boston Harbor is discussed as well as a stability assessment of SRM 1974a.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.