共查询到18条相似文献,搜索用时 78 毫秒
1.
两端系留纳米粒子聚合物是研究末端对聚合物链弛豫行为影响的优选分子模型.本文构建了两端系留纳米粒子聚合物模型,运用粗粒化分子动力学方法研究了两端系留纳米粒子聚合物的特征温度和弛豫行为,探讨了纳米粒子半径和聚合物链长对玻璃化转变温度、结晶温度和介电性能的影响.研究表明,聚合物两端纳米粒子的存在可延缓聚合物链的弛豫并促进结晶,使两端系留纳米粒子聚合物的玻璃化转变温度和结晶温度均增加.研究结果与相关的实验报道吻合,可加深对两端系留纳米粒子聚合物结构和性能的理解. 相似文献
2.
3.
采用非平衡态分子动力学模拟研究了剪切场下棒状纳米粒子对高分子基体的结构、 动力学和流变性质的影响. 通过比较多种体积分数(0.8%~10%)的纳米复合物及纯熔体的模拟结果发现, 随着纳米粒子的增加, 高分子链的扩散和松弛逐渐受到抑制, 而链尺寸几乎保持不变. 从Weissenberg number(Wi)角度看, 在剪切流场下, 高分子链的结构性质(如归一化的均方回转半径、 回转张量和取向抑制参数)几乎与纳米粒子的体积分数无关, 而高分子链的Tumbling运动受到抑制. 研究还发现, 纳米复合物与纯熔体的剪切黏度曲线趋势基本一致, 即Wi=1将曲线分为平台区和剪切变稀区. 纳米棒的加入仅定量地改变了流体的剪切黏度. 相似文献
4.
利用高分子-纳米粒子粗粒化模型,对高分子纳米复合材料(polymer nano-composites,PNC)的拉伸、压缩及平衡态过程进行分子动力学模拟研究.通过模拟PNC的拉伸及压缩过程,研究纳米粒子大小、质量分数对PNC力学性能的影响及拉伸、压缩过程中PNC体系微观交联网络的变化.在纳米粒子表面积或质量分数相同的情况下,小尺寸纳米粒子对PNC的力学性能增强效果更显著.对于含有质量分数不同的小尺寸纳米粒子的PNC体系,随纳米粒子质量分数增加,其力学性能增强,但增强程度逐渐减弱,且对于拉伸过程的材料增强效应,纳米粒子的质量分数存在最优值.在PNC体系中存在高分子-高分子(polymer-polymer)、高分子-纳米粒子(polymer-NP)2种微观交联网络,拉伸及压缩过程中PNC体系中2种微观交联网络的变化趋势不同,PNC拉伸及压缩产生应力的微观机制也相应有所不同.此外,对含质量分数不同的小尺寸纳米粒子的PNC平衡态过程的模拟研究表明,PNC体系中2种微观交联网络的比例直接影响其力学性能的变化,而纳米粒子的聚集则会降低PNC的力学性能增强效果. 相似文献
5.
6.
7.
8.
9.
用粗粒化的分子动力学(MD)模拟方法从分子层次研究了受限于粗糙壁内的聚合物熔体的动力学性质. 结果表明, 对于链长较短的受限聚合物熔体体系, 随着膜厚的增加, 体系内部高分子链的松弛时间逐渐减少; 然而对于链长较长的受限体系, 聚合物链的松弛时间随着膜厚的增加先减少后增加. 推测这种由于链长的变化所引起的动力学性质的差异源自受限熔体内聚合物链聚集状态的改变, 并且通过考察交叠参数对这种改变进行了分析. 结果表明, 在膜厚增加的过程中, 决定受限状态高分子长链松弛机理的因素逐渐从受限效应转变成为链间的缠结效应. 相似文献
10.
11.
Molecular dynamics simulations with embedded atom method potential were carried out for Al nanoparticles of 561 atoms in three structures: icosahedron, decahedron, and truncated octahedron. The total potential energy and specfic heat capacity were calculated to estimate the melting temperatures. The melting point is 540±10 K for the icosahedral structure,500±10 K for the decahedral structure, and 520±10 K for the truncated octahedral structure.With the results of mean square displacement, the bond order parameters and radius of gyration are consistent with the variation of total potential energy and specific heat capacity. The relaxation time and stretching parameters in the Kohlraush-William-Watts relaxation law were obtained by fitting the mean square displacement. The results show that the relationship between the relaxation time and the temperatures is in agreement with standard Arrhenius relation in the high temperature range. 相似文献
12.
13.
用粗粒化分子动力学(MD)模拟方法从分子层次研究两组分聚合物共混体系相分离过程中的动力学. 在相分离初期, 相区尺寸不随时间增加而变化; 在相分离中期, 相区尺寸与时间有很好的标度关系, 标度指数(α=1/3)符合Lifshiz-Slyozov提出的以扩散为主导的蒸发-凝聚机理的标度预测; 在相分离后期, 体系实现宏观相分离, 相区尺寸不再随时间改变而变化. 体积分数小的高分子链尺寸在相分离过程中先收缩再扩张, 在实现宏观相分离后, 高分子链尺寸又回到本体状态尺寸. 相似文献
14.
用分子动力学(MD)方法模拟了聚乙烯(含300个CH2单元)单链凝聚线团与一个双链处于平衡态的凝聚线团相互穿插的融合过程,考察分析了体系结构演变的能量信息及第三个链的引入对原来两链穿插状态的影响.研究发现,在两部分线团凝聚成一体后,各分子链一方面在表面势能各向异性的作用下试图挤入体系内部,另一方面在构象熵的驱动下又尽可能地占据体系的空间,线团的穿插是在两者共同作用下逐步完成的.第三个链的融入使得原来两个链的质心距离有所增加,链段的邻接程度减弱. 相似文献
15.
Polymers are widely used in our daily life and industry because of their intrinsic characteristics, such as multi-functionality, low cost, light mass, ease of processability, and excellent chemical stability. Polymers have multiscale space-time properties, which are mainly reflected in the fact that the properties of polymer systems depend not only on chemical structure and molecular properties, but also to a large extent on the aggregation state of molecules, that is, phase structure and condensed state structure. Thanks to the continuous development of simulation methods and the rapid improvement of scientific computation, computer simulation has played an increasingly important role in investigating the structure and properties of polymer systems. Among them, coarse-grained dynamics simulations provide a powerful tool for studying the self-assembly structure and dynamic behavior of polymers, such as glass transition and entanglement dynamics. This review summarizes the coarse-grained models and methods in the dynamic simulations for polymers and their composite systems based on graphics processing unit(GPU) algorithms, and discusses the characteristics, applications, and advantages of different simulation methods. Based on recent studies in our group, the main progress of coarse-grained simulation methods in studying the structure, properties and physical mechanism of polymer materials is reviewed. It is anticipated to provide a reference for further development of coarse-grained simulation methods and software suitable for polymer research. 相似文献
16.
17.
运用分子动力学方法模拟了小尺寸金属团簇的熔化过程, 原子之间的作用采用嵌入原子法(EAM)模型, 计算了均方根键长涨落δ随温度的变化, 以及升温过程中团簇热容的变化. 包含55、56个原子的面心立方(FCC)结构Au团簇的熔化过程是基本相同的. 而同样结构和数目Cu团簇的熔化过程却呈现出不同的趋势. Cu55、Cu56在模拟过程中都出现了FCC结构到二十面体结构的转变. 但由于表面多出了一个原子, Cu56的热容曲线比Cu55多了一个峰, 体系出现了预熔化现象. 这表明小尺寸团簇的固液转变的过程与团簇的原子类型、几何结构和原子数目密切相关. 相似文献
18.
表面上锚定聚乙烯链聚集的分子动力学模拟 总被引:1,自引:0,他引:1
利用分子动力学模拟方法研究了锚定于二维无限大表面上的聚乙烯分子链的聚集和有序化过程.聚乙烯链与表面的相互作用采用一个以平面法向距离为函数的势能表达式S(z).以均方回转半径垂直于表面的分量s2⊥作为指标,考察了模拟过程中表面势能函数的强度效应和模拟体系的温度效应.研究了锚定聚乙烯在表面上聚集的有序化过程,考察了锚定聚乙烯链的聚集成核的动力学过程,聚集体的形貌及分子量依赖性.发现锚定聚乙烯在300K时只在锚定点附近形成一个局部有序结构,然后以此为核进行生长.在模拟得到的有序程度不同的聚集体结构中,锚定点都位于聚集体链轴的端面. 相似文献