碳纳米管电极上辣根过氧化物酶的直接电化学

制备了碳纳米管修饰玻碳电极(CNT/GC).将辣根过氧化物酶(HRP)固定在CNT/GC电极表面,形成HRP-CNT/GC电极.研究了HRP的直接电子转移.实验结果表明,HRP在CNT/GC电极表面能进行有效和稳定的直接电子转移反应,其循环伏安曲线上表现出一对良好的、几乎对称的氧化还原峰;式量电位E^0'几乎不随扫速(至少在20～100 mV/s的扫速范围内)而变化,其平均值为(-0.319±0.002) V (vs. SCE, pH 6.9); HRP在CNT/GC电极表面直接电子转移的速率常数为(2.07±0.56) s^-1;式量电位E^0'与溶液pH 的关系表明HRP的直接电化学是(1e+1H⁺)的电极过程.进一步的实验结果显示,固定在CNT/GC电极表面的HRP能保持其对H₂O₂还原的生物电催化活性,而且能快速地响应H₂O₂浓度的变化.本文制备碳纳米管修饰电极和固定酶的方法具有简单和易于操作等优点,可用于获得其它生物氧化还原蛋白质和酶的直接电子转移.     

基于富勒烯衍生物修饰玻碳电极的DNA电化学传感器

以富勒烯C₆₀, L-苏氨酸及对苯二甲醛为原料, 在氮气保护下反应得到含醛基官能团的2-(4-醛基苯基)-5-(1-羟乙基)富勒烯吡咯烷衍生物(C₆₀-CHO). 将该材料修饰于玻碳电极表面, 并利用醛基与氨基之间温和、高效的缩合反应, 将5-氨基修饰的寡聚核苷酸共价固定到了C₆₀-CHO修饰的玻碳电极表面, 构建了一种新型的电化学DNA传感器. 以[Fe(CN)₆]^3−/4−为电活性探针, 采用电化学阻抗法对转基因植物CaMV35S启动子基因特征片段进行检测. 实验结果表明, 杂交前后的电子传递电阻差值(DR_et)与目标序列浓度对数(lg C_S2)在1.0×10^－13～1.0×10^－9 mol/L浓度范围内呈良好的线性关系, 线性回归方程为DR_et/(10³ Ω)＝3.471 lg (C_S2/mol/L)＋50.425 (r＝0.9977), 检测限为1.5×10⁻¹⁴ mol/L. 杂交特异性实验进一步表明该传感器对完全互补、碱基错配和非互补序列具有良好的识别能力.     

微波辅助合成具有优异电化学性能的rGO/CeO2超级电容器电极材料

CeO₂具有良好的赝电容, 但有关碳/CeO₂复合材料的电化学性能有待改善. 本工作采用简单的微波辅助合成法, 将氧化石墨烯与Ce(NO₃)₃混合发生氧化还原反应, 获得还原氧化石墨烯(rGO)/CeO₂复合材料. 通过形貌观察, CeO₂以颗粒形式均匀分布在褶皱的rGO上, 且沿着rGO表面仿形生长; 纳米级CeO₂颗粒之间存在微小间隙. N₂吸/脱附测试结果表明, rGO/CeO₂具有大的比表面积和介孔孔径, 有益于与电解液充分接触. 通过电化学测试, rGO/CeO₂的比电容高达468 F•g^-1, 经过10000次充放电循环, 电容保持率高达107.3%. 优异的循环稳定性归因于大表面积的rGO与均匀薄层的CeO₂良好的协同效应减少了离子传输的阻力以及CeO₂颗粒之间微小的间隙, 缓解了Ce⁴⁺还原为Ce³⁺过程中发生的晶格膨胀. 将rGO/CeO₂组装成对称型超级电容器rGO/CeO₂||rGO/CeO₂获得的能量密度达18.16 Wh•kg^-1. rGO/CeO₂作为超级电容器电极材料具有广阔前景.     

辣根过氧化物酶的电化学固定化及其对H2O2的生物电催化还原作用

利用电化学固定化方法制备了聚吡咯/辣根过氧化物酶(PP/HRP)膜电极,并研究了其电化学行为。在除氧的磷酸盐缓冲液介质中,PP/HRP电极加速H₂O₂的还原,归因于酶加成物的直接电子传递。探索HRP与电子传递体K₄Fe(CN)₆在聚吡咯(PP)膜中的同时固定化条件及其膜电极的电化学行为,实验证实,K₄Fe(CN)₆在酶膜中的存在使得H₂O₂的还原电位强烈正移,在-0.05V的工作电位下能对H₂O₂进行检测,相应的电极过程可用间接氧化还原催化机理解释。     

血红蛋白在二维纳米金Langmuir—Blodgett单层膜修饰电极上的直接电化学

利用Langmuir-Blodgett(LB)技术在氧化铟锡(ITO)电极上制备了分散均匀的二维纳米金单层膜,并将血红蛋白(Hb)直接固定于该修饰电极表面,研究了Hb在电极上的直接电化学行为.实验结果表明:纳米金可以改善Hb和电极间的直接电子传递,提高电子传递效率.Hb/Nano-Au修饰电极在pH 5.0～9.0范围内的式电位与溶液pH呈线性关系,斜率为-57 mV/pH,说明Hb的电子传递过程伴随质子转移;该修饰电极对H2O2具有良好的催化作用,在0.1 mol/L pH 7.0 的磷酸盐缓冲溶液(PBS)中,H2O2在2.5×10-6～4.1×10-4 mol/L浓度范围内与响应电流呈良好的线性关系,检出限为6.2×10-7 mol/L;其异相电子转移速率常数为0.66 s-1,米氏常数为0.20 mmol/L.     

2-(2-羟基-3-甲氧基苯基)-C60的合成及在花椰菜花叶病毒启动子DNA传感检测中的应用

通过1,3-偶极[3＋2]环加成反应, 合成了2-(2-羟基-3-甲氧基苯基)-C₆₀吡咯烷衍生物(HMP-C₆₀); 采用红外光谱、 紫外吸收光谱、 元素分析和液相色谱-质谱联用技术对产物的化学结构进行了表征. 基于该衍生物具有功能性的含氮和含氧基团, 通过滴涂法将其修饰在玻碳电极表面上, 并以Zr⁴⁺为桥联试剂将探针DNA通过 5′-PO₄^{3 -}组装到HMP-C₆₀修饰电极表面, 构建了基于HMP-C₆₀修饰电极的电化学DNA传感器. 以[Fe(CN)₆]^3-/4-为电活性探针, 对不同修饰电极进行了电化学表征, 并采用电化学交流阻抗法考察了该传感器对花椰菜花叶病毒(CaMV35S)启动子特征片段的分析性能. 实验结果表明, 在1.0×10^-13 ~ 1.0×10^-9 mol/L浓度范围内, 该电化学传感器电子转移阻抗变化值(ΔR_et)与目标序列浓度对数(lgc_S2)呈现良好的线性关系, 检出限为4.0×10^-14 mol/L (S/N=3). 该传感器能有效识别完全互补序列、 碱基错配序列和非互补序列, 表现出良好的选择性.     

酶法合成的葡萄糖氧化酶-纳米金复合物的直接电化学与生物传感

将NaAuCl₄、葡萄糖氧化酶（GOx）和葡萄糖混合,借一步酶促反应制得吸附GOx的金纳米颗粒（AuNPs）,再通过滴干修饰法研制了Nafion/GOx-AuNPs修饰的玻碳（GC）电极,并考察了该酶电极上GOx的直接电化学和生物传感性能. 这种酶法合成的GOx-AuNPs复合物有良好的酶直接电化学活性,也保持了GOx的生物活性,似可归因于酶法合成的纳米金更接近酶氧化还原活性中心的缘故. 该酶电极在-0.4 V（vs. SCE）电位下,其稳态电流下降与葡萄糖浓度（0.5 4 mmol·L^-1）成正比,检测下限0.2 mol·L^-1.     

基于辣根过氧化物酶/纳米金/辣根过氧化物酶/多壁纳米碳管修饰的过氧化氢生物传感器的研究

以固定在玻碳电极上的多壁纳米碳管为基底吸附辣根过氧化物酶, 再固定纳米金, 然后再结合一层辣根过氧化物酶, 利用多壁纳米碳管对辣根过氧化物酶的直接电化学催化特性及纳米金对蛋白质的强吸附能力及强的电子传导特性制备了无电子媒介体的过氧化氢生物传感器. 采用循环伏安法, 在无电子媒介体时, 该传感器对H₂O₂ 仍能具有良好的催化活性, 放大了电信号, 提高了该酶传感器的灵敏度及稳定性. 实验证明, 该传感器在H₂O₂浓度为 1.0×10^－6～ 1.0×10^－3 mol•L^－1范围内有线性响应, 线性相关系数r²＝0.9964. 并探讨了电极的稳定性、寿命及重现性.     

基于氧化铈纳米棒-聚乙烯醇气凝胶的模拟酶比色法检测水中氟离子

以聚乙烯醇气凝胶(PAA)为载体,水热法原位生长氧化铈(CeO₂)纳米棒,制备了CeO₂纳米棒-聚乙烯醇气凝胶模拟酶材料(CeO₂-PAAC)。PAA载体不仅提高了CeO₂纳米棒的分散性,同时也提高了材料的重复利用率。利用CeO₂-PAAC材料的氧化酶活性以及氟离子(F^-)对CeO₂纳米棒酶活性的增强作用构建了检测F^-的比色传感器。在优化的实验条件下,检测F^-的线性范围为80～4000μmol/L,检出限为63.7μmol/L (3σ),低于国际对V类地表水中F^-的限量标准。与文献报道的F^-检测方法相比,本方法的检测范围更宽。本方法具有良好的抗干扰能力和选择性,可用于环境水样中F^-的检测,加标回收率为97.1%～120.4%。     

固酶氮掺杂碳纳米复合物基燃料电池性能

利用掺杂氮介孔材料(NDMPC)和羧甲基壳聚糖(CMCH)机械共混的纳米复合物作为固酶载体,以滴涂-干燥法分别制备了固定漆酶(Lac)阴极和固定葡萄糖氧化酶阳极,组装了有Nafion离子交换膜的葡萄糖/O₂酶燃料电池.固定漆酶电极作为燃料电池阴极和氧电化学传感器的性能以结合旋转圆盘电极技术的循环伏安法、线性扫描伏安(LSV)法以及计时电流法进行表征,同时使用紫外-可见分光光度法和石墨炉原子吸收光谱法研究酶分子在电极表面的构型和估算电极表面载体对酶的担载量.测试结果表明:固酶阴极在无电子中介体时可以实现漆酶活性中心T₁与导电基体之间的直接电子迁移(表观电子迁移速率为0.013 s^-1),而且具有较小的氧还原超电势(150 mV).通过进一步定量比较分子内电子传递速率(1000 s^-1)、底物转化速率(0.023 s^-1)以及前述酶-导电基体间电子迁移速率,可以发现此电极催化氧还原循环受制于酶-电极之间的电子迁移过程;这种电极对氧的传感性能良好:低检测限(0.04 μmol·dm^-3)、高灵敏度(12.1 μA·μmol^-1·dm³)和良好的对氧亲和力(K_M = 8.2 μmol·dm^-3),这种固酶阴极还具有良好的重现性、长期使用性、热稳定性和pH耐受性.组装的生物燃料电池的开路电压为0.38 V,最大能量输出密度为19.2 μW·cm^-2,最佳工作条件下使用3周后输出功率密度仍可保持初始值的60%以上.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.