Highly efficient antibody-catalyzed deuteration of carbonyl compounds

Antibody 38C2 efficiently catalyzes deuterium-exchange reactions at the alpha position of a variety of ketones and aldehydes, including substrates that have a variety of sensitive functional groups. In addition to the regio- and chemoselectivity of these reactions, the catalytic rates (kcat) and rate-enhancement values (kcat/kun) are among the highest values ever observed with catalytic antibodies. Comparison of the substrate range of the catalytic antibody with highly evolved aldolase enzymes, such as rabbit-muscle aldolase, highlights the much broader practical scope of the antibody, which accepts a wide range of substrates. The hydrogen-exchange reaction was used for calibration and mapping of the antibody active site. Isotope-exchange experiments with cycloheptanone reveal that the formation of the Schiff base species (as concluded from the 16O/18O exchange rate at the carbonyl oxygen) is much faster than the formation of the enamine intermediate (as concluded from the H/D exchange rate), and both steps are faster than the antibody-catalyzed aldol addition reaction.     

Thermal isomerizations of ketenimines to nitriles: evaluations of sigma-Dot (sigma(*)) constants for spin-delocalizations

Rate constants (k(Y)) of the isomerizations of 11 diphenyl N-(substituted benzyl) ketenimines were measured at 40, 50, 60, and 70 degrees C. Activation parameters DeltaH()(Y) and DeltaS()(Y) were obtained using the Eyring equation. The relative rates (k(Y)/k(H)) were fitted into Hammett single correlations (log k(Y)/k(H) = rhosigma and log k(Y)/k(H) = rho(*)sigma(*)). The single correlations have been compared with Hammett dual correlations (log k(Y)/k(H) = rhosigma + rho(*)sigma(*) ). Separate treatments of para and meta substituents yielded even better correlations. Para substituents control the rates through spin-delocalizations and inductive effects. The former outweighs the latter when the latter exerts a modest but distinct influence on the rates. On the other hand, inductive effects are the "major" or the sole interactions triggered by meta substituents.     

Oxidation of symmetric disulfides with hydrogen peroxide catalyzed by Methyltrioxorhenium(VII)

Organic disulfides with both alkyl and aryl substituents are oxidized by hydrogen peroxide when CH(3)ReO(3) (MTO) is used as a catalyst. The first step of the reaction is complete usually in about an hour, at which point the thiosulfinate, RS(O)SR, can be detected in nearly quantitative yield. The thiosulfinate is then converted, also by MTO-catalyzed oxidation under these conditions, to the thiosulfonate and, over long periods, to sulfonic acids, RSO(3)H. In the absence of excess peroxide, RS(O)SR (R = p-tolyl), underwent disproportionation to RS(O)(2)SR and RSSR. Kinetics studies of the first oxidation reaction established that two peroxorhenium compounds are the active forms of the catalyst, CH(3)ReO(2)(eta(2)-O(2)) (A) and CH(3)ReO(eta(2)-O(2))(2).(OH(2)) (B). Their reactivities are similar; typical rate constants (L mol(-)(1) s(-)(1), 25 degrees C, aqueous acetonitrile) are k(A) = 22, k(B) = 150 (Bu(2)S(2)) and k(A) = 1.4, k(B) = 11 (Tol(2)S(2)). An analysis of the data for (p-XC(6)H(4))(2)S(2) by a plot of log k(B) against the Hammett sigma constant gave rho = -1.89, supporting a mechanism in which the electron-rich sulfur attacks a peroxo oxygen of intermediates A and B.     

Kinetic study of the phthalimide N-oxyl radical in acetic acid. Hydrogen abstraction from substituted toluenes, benzaldehydes, and benzyl alcohols

The phthalimide N-oxyl (PINO) radical was generated by the oxidation of N-hydroxyphthalimide (NHPI) with Pb(OAc)4 in acetic acid. The molar absorptivity of PINO* is 1.36 x 10(3) L mol(-1) cm(-1) at lambda(max) 382 nm. The PINO radical decomposes slowly with a second-order rate constant of 0.6 +/- 0.1 L mol(-1) s(-1) at 25 degrees C. The reactions of PINO(*) with substituted toluenes, benzaldehydes, and benzyl alcohols were investigated under an argon atmosphere. The second-order rate constants were correlated by means of a Hammett analysis. The reactions with toluenes and benzyl alcohols have better correlations with sigma+ (rho = -1.3 and -0.41), and the reaction with benzaldehydes correlates better with sigma (rho = -0.91). The kinetic isotope effect was also studied and significantly large values of k(H)/k(D) were obtained: 25.0 (p-xylene), 27.1 (toluene), 27.5 (benzaldehyde), and 16.9 (benzyl alcohol) at 25 degrees C. From the Arrhenius plot for the reactions with p-xylene and p-xylene-d(10), the difference of the activation energies, E(a)(D) - E(a)(H), was 12.6 +/- 0.8 kJ mol(-1) and the ratio of preexponential factors, A(H)/A(D), was 0.17 +/- 0.05. These findings indicate that quantum mechanical tunneling plays an important role in these reactions.     

Lewis acidity of methyltrioxorhenium(VII) (MTO) based on the relative binding strengths of N-donors

This article presents a sigma acceptor strength scale for methyltrioxorhenium(VII) (MTO), one of the most versatile and useful high oxidation state organometallics ever described. The spectrophotometric titration of MTO with a series of N-donor bases in CCl(4) gives formation constants (K(f)) and enthalpies for the adduct formation reactions. An excellent linearity of log K(f) with respect to the Hammett sigma constants of the substituents on the ligands was observed. The resulting rho constant is proposed to be a good indication of the Lewis acidity of MTO. The enthalpies of adduct formation of N-donors with MTO also fit the ECW model to predict the values of E(A) and C(A) parameters for MTO. The parameters can be used to predict an acidity scale for MTO. These parameters also allow the chemists to predict and correlate quantitatively the enthalpies of MTO.Lewis base interactions. Significant chemical insights result from the fit of the data to the ECW model.     

Oxidative formation of thiolesters in a model system of the pyruvate dehydrogenase complex

In the presence of a catalytic amount of 3-butyl-4-methylthiazolium bromide, the reaction of benzaldehydes with azobenzene in dichloromethane containing octanethiol and Et(3)N gave the corresponding S-octyl thiobenzoates in good yields. The thiolesters were produced by trapping of the 2-benzoylthiazolium salts with the thiol, which were generated through the azobenzene oxidation of the active aldehydes. This is the first example for the thiolester formation mimicking the function of the pyruvate dehydrogenase complex. An electron-withdrawing substituent at the 4-position of benzaldehyde enhanced the reaction rate. The effect of benzaldehyde substituents on the reaction rate was examined quantitatively on the basis of kinetic measurements, leading to a nonlinear correlation of log(k(obs)) with Hammett's substituent constants (sigma). The origin of the nonlinear Hammett plot was interpreted in terms of a shift in the rate-determining step of the multistep reaction with change of the electronic nature of substituent. Further support for this assumption was given by the observation that the reaction constant (rho) of the Hammett plot for the azobenzene substituent effect on the oxidation rate of 4-bromobenzaldehyde was much smaller than that of 4-cyanobenzaldehyde.     

Reaction mechanisms between methylamine and a few Schiff bases: Ab initio potential energy surfaces of a catalytic step in semicarbazide sensitive amino oxidases (SSAO)

The potential energy surfaces for the transamination reaction catalyzed by SSAO were explored for some of the possible reactants considered in a preliminary investigation (Comput Chem 2000, 24 , 311). The proton transfer to methylamine (as a model of the catalytic base belonging to the enzyme active site)—either from the keto or enol form of the reactant Schiff bases with one of the possible cofactors, pyridoxal phosphate, PLP (using as a model the pyridoxal ring protonated at N)—was investigated. The enol form seems to be preferred in the region of the neutral intermediate, because even the keto form undergoes a spontaneous rearrangement to the enol form once the C_α proton is delivered to methylamine, producing methylammonium. When the proton is returned back to the Schiff base (on C₁), the adduct is about 1.4 kcal/mol more stable than the reactants, while a canonical electron distribution is obtainable only for the enol form. The proton transfer to methylamine was also studied in the presence of the other possible cofactor (para or ortho) topaquinone, TQ. A steep uphill pathway, similar to the keto‐pyridoxal Schiff base one, is obtained using the Schiff base with pTQ, which requires a rearrangement to the final intermediate. On the contrary, using the oTQ structures with the quinonoid O on the same side of methylamine, the proton abstracted from the Schiff base goes spontaneously onto the other quinonoid oxygen. The effect on the barrier heights produced by the presence of a variety of functional groups in the vicinity of the pyridoxal ring nitrogen was also examined. © 2001 John Wiley & Sons, Inc. Int J Quant Chem, 2001     

Hydrogen for fluorine exchange in C6F6 and C6F5H by monomeric [1,3,4-(Me3C)3C5H2]2CeH: experimental and computational studies

The net reaction of monomeric Cp'(2)CeH [Cp' = 1,3,4-(Me(3)C)(3)(C(5)H(2))] in C(6)D(6) with C(6)F(6) is Cp'(2)CeF, H(2), and tetrafluorobenzyne. The pentafluorophenylmetallocene, Cp'(2)Ce(C(6)F(5)), is formed as an intermediate that decomposes slowly to Cp'(2)CeF and C(6)F(4) (tetrafluorobenzyne), and the latter is trapped by the solvent C(6)D(6) as a [2+4] cycloadduct. In C(6)F(5)H, the final products are also Cp'(2)CeF and H(2), which are formed from the intermediates Cp'(2)Ce(C(6)F(5)) and Cp'(2)Ce(2,3,5,6-C(6)F(4)H) and from an unidentified metallocene of cerium and the [2+4] cycloadducts of tetra- and trifluorobenzyne with C(6)D(6). The hydride, fluoride, and pentafluorophenylmetallocenes are isolated and characterized by X-ray crystallography. DFT(B3PW91) calculations have been used to explore the pathways leading to the observed products of the exergonic reactions. A key step is a H/F exchange reaction which transforms C(6)F(6) and the cerium hydride into C(6)F(5)H and Cp'(2)CeF. This reaction starts by an eta(1)-F-C(6)F(5) interaction, which serves as a hook. The reaction proceeds via a sigma bond metathesis where the fluorine ortho to the hook migrates toward H with a relatively low activation energy. All products observed experimentally are accommodated by pathways that involve C-F and C-H bond cleavages.     

手性三齿席夫碱金属络合物催化的不对称反应*

各种手性三齿席夫碱与金属（钛, 铬, 钒, 铁, 铜, 铝）形成的络合物,在催化醛的硅腈化、Diels-Alder、Aldol、杂ene、硫化物的氧化等不对称反应中具有良好的催化活性和对映选择性;其中一些催化体系已成功的应用于天然产物的全合成中,该研究取得了系统性的研究成果。本文综述了手性三齿席夫碱金属络合物在不对称催化反应中的研究进展,同时,探讨了催化剂结构和反应条件对其催化活性和对映选择性的影响。     

Polymeric Schiff Bases. III. Some Prototype Exchange Reactions of Schiff Bases

The amine moiety in Schiff bases can be exchanged quantitatively by another amine to yield new Schiff bases if the volatility of the replacing amine is lower than the derived amine, thereby allowing the latter to distilled from the reaction mass. This amine exchange was shown to be quantitative also for diamines and di-Schiff bases. Similarly, quantitative conversions were found for aldehydes and acetal exchanges with Schiff bases for both monofunctional and difunctional reactants. The bis exchange, involving two complementary Schiff bases, was quantitative also when the reactants were so selected that one of the new derived Schiff bases could be removed by distillation. The bis exchange was demonstrated with mono and di-Schiff bases.

Mechanisms are suggested for these Schiff base exchange reactions: attempts to isolate the proposed intermediates physically were unsuccessful; however spectroscopic evidence indicates the formation of intermediate compounds.

The Schiff base exchanges involving polyfunctional reactants are of interest in the synthesis of polymers.     

The sigma-CAM Mechanism: sigma complexes as the basis of sigma-bond metathesis at late-transition-metal centers

Complexes in which a sigma-H--E bond (E=H, B, Si, C) acts as a two-electron donor to the metal center are called sigma complexes. Clues that it is possible to interconvert sigma ligands without a change in oxidation state derive from C--H activation reactions effecting isotope exchange and from dynamic rearrangements of sigma complexes (see Frontispiece). Through these pathways, metathesis of M--E bonds can occur at late transition metals. We call this process sigma-complex-assisted metathesis, or sigma-CAM, which is distinct from the familiar sigma-bond metathesis (typical for d(0) metals and requiring no intermediate) and from oxidative-reductive elimination mechanisms (inherently requiring intermediates with changed oxidation states and sometimes involving sigma complexes). There are examples of sigma-CAM mechanisms in catalysis, especially for alkane borylation and isotope exchange of alkanes. It may also occur in silylation and alkene hydrogenation.     

Competitive reaction pathways in the nucleophilic substitution reactions of aryl benzenesulfonates with benzylamines in acetonitrile

The reactions of aryl benzenesulfonates (YC6H4SO2OC6H4Z) with benzylamines (XC6H4CH2NH2) in acetonitrile at 65.0 degrees C have been studied. The reactions proceed competitively by S-O (kS-O) and C-O (kC-O) bond scission, but the former provides the major reaction pathway. On the basis of analyses of the Hammett and Br?nsted coefficients together with the cross-interaction constants rho(XY), rho(YZ), and rho(XZ), stepwise mechanisms are proposed in which the S-O bond cleavage proceeds by rate-limiting formation of a trigonal-bipyramidal pentacoordinate (TBP-5C) intermediate, whereas the C-O bond scission takes place by rate-limiting expulsion of the sulfonate anion (YC6H4SO3-) from a Meisenheimer-type complex.     

Highly active thermomorphic fluorous palladacycle catalyst precursors for the Heck reaction; evidence for a palladium nanoparticle pathway

[reaction: see text] The fluorous Schiff base p-Rf8(CH2)3C6H4C(=N(CH2)3Rf8)(CH2)2Rf8 (Rf8 = n-C8F17) is prepared in six steps from p-iodobenzaldehyde and then cyclopalladated (Pd(OAc)2) to give highly effective catalyst precursors for Heck reactions, conducted under homogeneous conditions (DMF, 80-140 degrees C, turnover numbers >10(6)) in the absence of fluorous solvents. Rate, recycling, and other data suggest that the palladacycles serve as sources of palladium nanoparticles, which are the dominant active catalysts.     

Bifunctional rhenium complexes for the catalytic transfer-hydrogenation reactions of ketones and imines

The silyloxycyclopentadienyl hydride complexes [Re(H)(NO)(PR(3))(C(5)H(4)OSiMe(2)tBu)] (R=iPr (3 a), Cy (3 b)) were obtained by the reaction of [Re(H)(Br)(NO)(PR(3))(2)] (R=iPr, Cy) with Li[C(5)H(4)OSiMe(2)tBu]. The ligand-metal bifunctional rhenium catalysts [Re(H)(NO)(PR(3))(C(5)H(4)OH)] (R=iPr (5 a), Cy (5 b)) were prepared from compounds 3 a and 3 b by silyl deprotection with TBAF and subsequent acidification of the intermediate salts [Re(H)(NO)(PR(3))(C(5)H(4)O)][NBu(4)] (R=iPr (4 a), Cy (4 b)) with NH(4)Br. In nonpolar solvents, compounds 5 a and 5 b formed an equilibrium with the isomerized trans-dihydride cyclopentadienone species [Re(H)(2)(NO)(PR(3))(C(5)H(4)O)] (6 a,b). Deuterium-labeling studies of compounds 5 a and 5 b with D(2) and D(2)O showed H/D exchange at the H(Re) and H(O) positions. Compounds 5 a and 5 b were active catalysts in the transfer hydrogenation reactions of ketones and imines with 2-propanol as both the solvent and H(2) source. The mechanism of the transfer hydrogenation and isomerization reactions was supported by DFT calculations, which suggested a secondary-coordination-sphere mechanism for the transfer hydrogenation of ketones.     

Isomerization and fragmentation reactions of gaseous phenylarsane radical cations and phenylarsanyl cations. A study by tandem mass spectrometry and theoretical calculations

The unimolecular reactions of radical cations and cations derived from phenylarsane, C6H5AsH2 (1) and dideutero phenylarsane, C6H5AsD2 (1-d2), were investigated by methods of tandem mass spectrometry and theoretical calculations. The mass spectrometric experiments reveal that the molecular ion of phenylarsane, 1*+, exhibits different reactivity at low and high internal excess energy. Only at low internal energy the observed fragmentations are as expected, that is the molecular ion 1*+ decomposes almost exclusively by loss of an H atom. The deuterated derivative 1-d2 with an AsD2 group eliminates selectively a D atom under these conditions. The resulting phenylarsenium ion [C6H5AsH]+, 2+, decomposes rather easily by loss of the As atom to give the benzene radical cation [C6H6]*+ and is therefore of low abundance in the 70 eV EI mass spectrum. At high internal excess energy, the ion 1*+ decomposes very differently either by elimination of an H2 molecule, or by release of the As atom, or by loss of an AsH fragment. Final products of these reactions are either the benzoarsenium ion 4*+, or the benzonium ion [C6H7]+, or the benzene radical cation, [C6H6]*+. As key-steps, these fragmentations contain reductive eliminations from the central As atom under H-H or C-H bond formation. Labeling experiments show that H/D exchange reactions precede these fragmentations and, specifically, that complete positional exchange of the H atoms in 1*+ occurs. Computations at the UMP2/6-311+G(d)//UHF/6-311+G(d) level agree best with the experimental results and suggest: (i) 1*+ rearranges (activation enthalpy of 93 kJ mol(-1)) to a distinctly more stable (DeltaH(r)(298) = -64 kJ mol(-1)) isomer 1 sigma*+ with a structure best represented as a distonic radical cation sigma complex between AsH and benzene. (ii) The six H atoms of the benzene moiety of 1 sigma*+ become equivalent by a fast ring walk of the AsH group. (iii) A reversible isomerization 1+<==>1 sigma*+ scrambles eventually all H atoms over all positions in 1*+. The distonic radical cation 1*+ is predisposed for the elimination of an As atom or an AsH fragment. The calculations are in accordance with the experimentally preferred reactions when the As atom and the AsH fragment are generated in the quartet and triplet state, respectively. Alternatively, 1*(+) undergoes a reductive elimination of H2 from the AsH2 group via a remarkably stable complex of the phenylarsandiyl radical cation, [C6H5As]*+ and an H2 molecule.     

A QM/MM simulation study of transamination reaction at the active site of aspartate aminotransferase: Free energy landscape and proton transfer pathways

Transaminase is a key enzyme for amino acid metabolism, which reversibly catalyzes the transamination reaction with the help of PLP (pyridoxal 5^' -phosphate) as its cofactor. Here we have investigated the mechanism and free energy landscape of the transamination reaction involving the aspartate transaminase (AspTase) enzyme and aspartate-PLP (Asp-PLP) complex using QM/MM simulation and metadynamics methods. The reaction is found to follow a stepwise mechanism where the active site residue Lys258 acts as a base to shuttle a proton from α -carbon (CA) to imine carbon (C4A) of the PLP-Asp Schiff base. In the first step, the Lys258 abstracts the CA proton of the substrate leading to the formation of a carbanionic intermediate which is followed by the reprotonation of the Asp-PLP Schiff base at C4A atom by Lys258. It is found that the free energy barrier for the proton abstraction by Lys258 and that for the reprotonation are 17.85 and 3.57 kcal/mol, respectively. The carbanionic intermediate is 7.14 kcal/mol higher in energy than the reactant. Hence, the first step acts as the rate limiting step. The present calculations also show that the Lys258 residue undergoes a conformational change after the first step of transamination reaction and becomes proximal to C4A atom of the Asp-PLP Schiff base to favor the second step. The active site residues Tyr70* and Gly38 anchor the Lys258 in proper position and orientation during the first step of the reaction and stabilize the positive charge over Lys258 generated at the intermediate step.     

Six‐coordinated vanadium(IV) complexes with tridentate task‐specific ionic liquid Schiff base ligands: Synthesis,characterization and effect of ionic nature on catalytic activity

By reaction of 5‐(chloromethyl)salicylaldehyde with triphenylphosphine and N‐methylimidazole in two separate reactions, salicylaldehydetriphenylphosphonium chloride (S²) and salicylaldehydemethylimidazolinium chloride (S³) were prepared. Reaction of 2‐(aminomethyl)pyridine with these aldehydes resulted in the task‐specific ionic liquid Schiff base ligands L¹ and L², respectively. Then six‐coordinated vanadium(IV) Schiff base complexes of VO(acac)L^1–4 were synthesized by reactions of these tridentate Schiff base ligands and VO(acac)₂ in 1:1 stoichiometry. The aldehydes, ligands and VO(acac)L^1–4 complexes were characterized using infrared, ¹H NMR, ¹³C NMR, ³¹P NMR, UV–visible and mass spectroscopies, as well as elemental analysis. Paramagnetic property of the complexes was also studied using magnetic susceptibility measurements. The complexes were used as catalysts in epoxidation of cyclooctene and oxidation of methylphenyl sulfide and the reaction parameters were optimized. The effect of the ionic nature of the complexes was investigated in these oxidation reactions. The catalytic activity of the complexes could be varied by changing the ionic (cationic or anionic) character of VO(acac)L^1–4 catalysts in which counter anion variation showed a greater effect than cationic moiety variation.     

Experimental and theoretical study of the photodissociation reaction of thiophenol at 243 nm: intramolecular orbital alignment of the phenylthiyl radical

The photoinduced hydrogen (or deuterium) detachment reaction of thiophenol (C(6)H(5)SH) or thiophenol-d(1) (C(6)H(5)SD) pumped at 243 nm has been investigated using the H (D) ion velocity map imaging technique. Photodissociation products, corresponding to the two distinct and anisotropic rings observed in the H (or D) ion images, are identified as the two lowest electronic states of phenylthiyl radical (C(6)H(5)S). Ab initio calculations show that the singly occupied molecular orbital of the phenylthiyl radical is localized on the sulfur atom and it is oriented either perpendicular or parallel to the molecular plane for the ground (B(1)) and the first excited state (B(2)) species, respectively. The experimental energy separation between these two states is 2600+/-200 cm(-1) in excellent agreement with the authors' theoretical prediction of 2674 cm(-1) at the CASPT2 level. The experimental anisotropy parameter (beta) of -1.0+/-0.05 at the large translational energy of D from the C(6)H(5)SD dissociation indicates that the transition dipole moment associated with this optical transition at 243 nm is perpendicular to the dissociating S-D bond, which in turn suggests an ultrafast D+C(6)H(5)S(B(1)) dissociation channel on a repulsive potential energy surface. The reduced anisotropy parameter of -0.76+/-0.04 observed at the smaller translational energy of D suggests that the D+C(6)H(5)S(B(2)) channel may proceed on adiabatic reaction paths resulting from the coupling of the initially excited state to other low-lying electronic states encountered along the reaction coordinate. Detailed high level ab initio calculations adopting multireference wave functions reveal that the C(6)H(5)S(B(1)) channel may be directly accessed via a (1)(n(pi),sigma(*)) photoexcitation at 243 nm while the key feature of the photodissociation dynamics of the C(6)H(5)S(B(2)) channel is the involvement of the (3)(n(pi),pi(*))-->(3)(n(sigma),sigma(*)) profile as well as the spin-orbit induced avoided crossing between the ground and the (3)(n(pi),sigma(*)) state. The S-D bond dissociation energy of thiophenol-d(1) is accurately estimated to be D(0)=79.6+/-0.3 kcalmol. The S-H bond dissociation energy is also estimated to give D(0)=76.8+/-0.3 kcalmol, which is smaller than previously reported ones by at least 2 kcalmol. The C-H bond of the benzene moiety is found to give rise to the H fragment. Ring opening reactions induced by the pi-pi(*)n(pi)-pi(*) transitions followed by internal conversion may be responsible for the isotropic broad translational energy distribution of fragments.     

Iron(III) [bond] Salen complexes as enzyme models: mechanistic study of oxo(salen)iron complexes oxygenation of organic sulfides

The oxidation of a series of para-substituted phenyl methyl sulfides was carried out with several oxo(salen)iron (salen = N,N'-bis(salicylidine)ethylenediaminato) complexes in acetonitrile. The oxo complex [O=Fe(IV)(salen)](*+), generated from an iron(III) [bond] salen complex and iodosylbenzene, effectively oxidizes the organic sulfides to the corresponding sulfoxides. The formation of [O [double bond] Fe(IV)(salen)](*+) as the active oxidant is supported by resonance Raman studies. The kinetic data indicate that the reaction is first-order in the oxidant and fractional-order with respect to sulfide. The observed saturation kinetics of the reaction and spectral data indicate that the substrate binds to the oxidant before the rate-controlling step. The rate constant (k) values for the product formation step determined using Michaelis-Menten kinetics correlate well with Hammett sigma constants, giving reaction constant (rho) values in the range of -0.65 to -1.54 for different oxo(salen)iron complexes. The log k values observed in the oxidation of each aryl methyl sulfide by substituted oxo(salen)iron complexes also correlate with Hammett sigma constants, giving positive rho values. The substituent effect, UV-vis absorption, and EPR spectral studies indicate oxygen atom transfer from the oxidant to the substrate in the rate-determining step.     

Designing multistep transformations using the Hammett equation: imine exchange on a copper(I) template

Herein, we quantify how imine exchange may be used to selectively transform one metallo-organic structure into another. A series of imine exchange reactions were studied, involving a set of 4-substituted anilines, their 2-pyridylimines and 1,10-phenanthrolyl-2,9-diimines, as well as the copper complexes of these imine ligands. Electron-rich anilines were found to displace electron-poor anilines in all cases. Linear free energy relationships (LFERs) were discovered connecting the electron-donating or -withdrawing character of the 4-substituent of an aniline, as measured by the Hammett sigma(para) parameter, to that aniline's ability to compete with unsubstituted aniline to form imines. The quality of these LFERs allowed for quantitative predictions: to obtain the desired degree of selectivity in an imine exchange between anilines A and B, the required sigma(para) differential could be predicted using a variant of the Hammett equation, log(K(AB)) = rho(sigma(A) - sigma(B)). We validated this methodology by designing and executing a three-step transformation of a series of copper(I)-containing structures. Each step proceeded in predictably high yield, as calculated from sigma differentials. At each step in the series of transformations, macrocyclic structures could be created or destroyed through the selection of mono- or di-amines as subcomponents. The same methodology could be used to predict the formation of a diverse dynamic library of helicates from a set of four aniline precursors, as well as the collapse of this library into one helicate upon the addition of a fifth aniline.