Interactions between bottle-brush polyelectrolyte layers: effects of ionic strength and oppositely charged surfactant

Interactions between cationic bottle-brush polyelectrolyte layers adsorbed on mica across salt and oppositely charged surfactant solutions were investigated with the interferometric surface force apparatus, and the results were compared with what is known for similarly charged linear polyelectrolytes. Ellipsometric measurements demonstrated that the bottle-brush polyelectrolytes, which contain 45 units long poly(ethylene oxide) side chains, are more readily desorbed than linear equivalents when the ionic strength of the solution is increased. It is argued that this is due to the steric repulsion between the poly(ethylene oxide) side chains that reduces the surface affinity. The preadsorbed bottle-brush polyelectrolyte layers were also exposed to sodium dodecyl sulfate (SDS) solutions. It was found that the presence of SDS affected the force profiles less than observed for similarly charged linear polyelectrolytes. This observation was attributed to excluded volume constraints imposed by the poly(ethylene oxide) side chains that reduces the accessibility of the charged polyelectrolyte segments and counteracts formation of large aggregates within the layer.     

Interactions between Adsorbed Layers of a Low Charge Density Cationic Polyelectrolyte on Mica in the Absence and Presence of Anionic Surfactant

Interactions between two negatively charged mica surfaces across aqueous solutions containing various amounts of a 10% charged cationic polyelectrolyte have been studied. It is found that the mica surface charge is neutralized when the polyelectrolyte is adsorbed from a 10–50 ppm aqueous solution. Consequently no electrostatic double-layer force is observed. Instead an attractive force acts between the surfaces in the distance regime 250–100 Å. We suggest that this attraction is caused by bridging. Additional adsorption takes place when the polyelectrolyte concentration is increased to 100 and 300 ppm, and a long-range repulsion develops. This repulsive force is both of electrostatic and steric origin. The polyelectrolyte layer adsorbed from a 50 ppm solution does not desorb when the polyelectrolyte solution is replaced with an aqueous polyelectrolyte-free solution. Injection of sodium dodecyl sulfate (SDS) into the measuring chamber to a concentration of about 0.01 CMC (8.3 × 10⁻⁵M) does not affect the adsorbed layers or the interaction forces. However, when the SDS concentration is increased to 0.02 CMC (0.166 mM) the adsorbed layer expands dramatically due to adsorption of SDS to the polyelectrolyte chains. The sudden swelling suggests a cooperative adsorption of SDS to the preadsorbed polyelectrolyte layer and that the critical aggregation concentration between the polyelectrolyte and SDS at the surface is about 0.02 CMC. The flocculation behavior of the polyelectrolyte in solution upon addition of SDS was also examined. It was found that 0.16–0.32 mol SDS/mol charged segments on the polyelectrolyte is enough to make the solution slightly turbid.     

Coadsorption and surface forces for selective surfaces in contact with aqueous mixtures of oppositely charged surfactants and low charge density polyelectrolytes

The coadsorption of a positively charged polyelectrolyte (with 10% of the segments carrying a permanent positive charge, AM-MAPTAC-10) and an anionic surfactant (sodium dodecyl sulfate, SDS) on silica and glass surfaces has been investigated using optical reflectometry and a noninterferometric surface force technique. This is a selective coadsorption system in the sense that the polyelectrolyte does adsorb to the surface in the absence of surfactant, whereas the surfactant does not adsorb in the absence ofpolyelectrolyte. It is found that the total adsorbed amount goes through a maximum when the SDS concentration is increased. Maximum adsorption is found when the polyelectrolyte/surfactant complexes formed in bulk solution are close to the charge neutralization point. Some adsorption does occur also when SDS is present in significant excess. The force measured between AM-MAPTAC-10-coated surfaces on approach in the absence of SDS is dominated at long range by an electrostatic double-layer force. Yet, layers formed by coadsorption from solutions containing both polyelectrolyte and surfactant generate long-range forces of an electrosteric nature. On separation, adhesive interactions are found only when the adsorbed amount is low, i.e., in the absence of SDS and in a large excess of SDS. The final state of the adsorbed layer is found to be nonhysteretic, i.e., independent of the history of the system. The conditions for formation of long-lived trapped adsorption states from mixed polymer-surfactant solutions are discussed.     

Adsorption of poly(ethyleneimine) on silica surfaces: effect of pH on the reversibility of adsorption

The role of polymer charge density in the kinetics of the adsorption and desorption, on silica, of the polyelectrolyte poly(ethyleneimine) (PEI) was investigated by stagnation-point flow reflectometry. In the first series of experiments, PEI solutions were introduced at the same ionic strength and pH as the background solvent. It was found that the adsorbed amount of PEI increased by increasing pH. In the second series of investigations, several PEI solutions with ascending pH were introduced consecutively into the cell. In these cases, a stepwise buildup of the adsorbed amount was observed and the "final" adsorbed amounts were observed to be roughly equal with the adsorbed amounts of the first series of measurements at the same pH. Finally, adsorption/desorption experiments were performed where the preadsorption of PEI was followed by the introduction of PEI solutions of descending pH. No desorption was detected when the pH changed from pH = 9.7 to pH = 5.8. However, when there was a 9.7 --> 3.3 or 5.8 --> 3.3 decrease in the pH, the kinetic barriers of desorption seemed to completely disappear and roughly the same adsorbed amount as in the first series of experiments at pH = 3.3 was quickly attained by desorption of the PEI. This study reveals the high impact of pH, affecting parameters such as charge density of the surface and polyelectrolyte as well as the structure of the adsorbed macromolecules, on the desorption properties of weak polyelectrolytes. The observed interfacial behavior of PEI may have some important consequences for the stability of alternating polyelectrolyte multilayers containing weak polyelectrolytes.     

Visualization of hydrophobic polyelectrolytes using atomic force microscopy in solution

We have used atomic force microscopy to study the morphology of hydrophobic polyelectrolytes adsorbed on surfaces. The polyelectrolytes consisted of polystyrene sulfonate (PSS) chains made with three charge densities: 32%, 67%, and 92%. They were adsorbed on two types of surfaces: mica, and phospholipid bilayers made of mixed neutral and cationic lipids. We show that the chains with a low charge density (32%) are collapsed in spherical globules while highly charged chains (67% and 92%) are fully extended. End-to-end distances and contour lengths of the extended chains were measured. Statistical analysis shows that the persistence length of these chains depends on the surface where they adsorb. On lipid bilayers, highly ordered monolayers are formed upon increase of the proportion of cationic phospholipids. These results show that highly charged PSS chains behave in a similar manner than the stiffer, hydrophilic DNA when adsorbed on surfaces. It could lead to the design of new types of nanostructured surfaces using polyelectrolyte molecules synthesized with specific properties.     

Two different approaches to XPS quantitative analysis of polyelectrolyte adsorption layers

X-ray photoelectron spectroscopy (XPS) was employed to quantify adsorption of polyelectrolytes from aqueous solutions of low ionic strength onto mica, glass, and silica. Silica surfaces were conditioned in base or in acid media as last pre-treatment step (silica-base last or silica-acid last, respectively). Consistency in the determined adsorbed amount, Γ, was obtained independent of the choice of XPS mode and with the two quantification approaches used in the data evaluation. Under the same adsorption conditions, the adsorbed amount, Γ, varied as Γ_mica > Γ_{silica-base last} ≈ Γ_glass > Γ_{silica-acid last}. In addition, the adsorbed amount increased with decreasing polyelectrolyte charge density (100% to 1% of segments being charged) for all substrates. Large adsorbed amount was measured for low-charge density polyelectrolytes, but the number of charged segments per square nanometer was low due to steric repulsion between polyelectrolyte chains that limited the adsorption. The adsorbed amount of highly charged polyelectrolytes was controlled by electrostatic interactions and thus limited to that needed to neutralize the substrate surface charge density. For silica, the adsorbed amount depended on the cleaning method, suggesting that this process influenced surface concentration and fraction of different silanol groups. Our results demonstrate that for silica, a higher density and/or more acidic silanol groups are formed using base, rather than acid, treatment in the last step.     

Molecular dynamics simulations of layer-by-layer assembly of polyelectrolytes at charged surfaces: effects of chain degree of polymerization and fraction of charged monomers

We performed molecular dynamics simulations of the electrostatic assembly of multilayers of flexible polyelectrolytes at a charged surface. The multilayer build-up was achieved through sequential adsorption of oppositely charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The steady-state multilayer growth proceeds through a charge reversal of the adsorbed polymeric film which leads to a linear increase in the polymer surface coverage after completion of the first few deposition steps. Moreover, substantial intermixing between chains adsorbed during different deposition steps is observed. This intermixing is consistent with the observed requirement for several deposition steps to transpire for completion of a single layer. However, despite chain intermixing, there are almost perfect periodic oscillations of the density difference between monomers belonging to positively and negatively charged macromolecules in the adsorbed film. Weakly charged chains show higher polymer surface coverage than strongly charged ones.     

Surface properties of bottle-brush polyelectrolytes on mica: effects of side chain and charge densities

Surface properties of a series of cationic bottle-brush polyelectrolytes with 45-unit-long poly(ethylene oxide) side chains were investigated by phase modulated ellipsometry and surface force measurements. The evaluation of the adsorbed mass of polymer on mica by means of ellipsometry is complex due to the transparency of mica and its birefringence and low dielectric constant. We therefore employed a new method to overcome these difficulties. The charge and the poly(ethylene oxide) side chain density of the bottle-brush polymers were varied from zero charge density and one side chain per segment to one charge per segment and no side chains, thus spanning the realm from a neutral bottle-brush polymer, via a partly charged brush polyelectrolyte, to a linear fully charged polyelectrolyte. The adsorption properties depend crucially on the polymer architecture. A minimum charge density of the polymer is required to facilitate adsorption to the oppositely charged surface. The maximum adsorbed amount and the maximum side chain density at the surface are obtained for the polymer with 50% charged segments and the remaining 50% of the segments carrying poly(ethylene oxide) side chains. It is found that brushlike layers are formed when 25-50% of the segments carry poly(ethylene oxide) side chains. In this paper, we argue that the repulsion between the side chains results in an adsorbed layer that is non-homogeneous on the molecular level. As a result, not all side chains will contribute equally to the steric repulsion but some will be stretched along the surface rather than perpendicular to it. By comparison with linear polyelectrolytes, it will be shown that the presence of the side chains counteracts adsorption. This is due to the entropic penalty of confining the side chains to the surface region.     

Molecular dynamics simulations of multilayer polyelectrolyte films: effect of electrostatic and short-range interactions

The effect of the strength of electrostatic and short-range interactions on the multilayer assembly of oppositely charged polyelectrolytes at a charged substrate was studied by molecular dynamics simulations. The multilayer buildup was achieved through sequential adsorption of charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The strong electrostatic attraction between oppositely charged polyelectrolytes at each deposition step is a driving force behind the multilayer growth. Our simulations have shown that a charge reversal after each deposition step is critical for steady multilayer growth and that there is a linear increase in polymer surface coverage after the first few deposition steps. Furthermore, there is substantial intermixing between chains adsorbed during different deposition steps. We show that the polymer surface coverage and multilayer structure are each strongly influenced by the strength of electrostatic and short-range interactions.     

Proteins and polyelectrolytes: A charged relationship

We review the interaction of charged polymeric systems with proteins. In solutions of low ionic strength there are many examples of proteins attracted to polyelectrolytes even if both systems carry the same overall charge. This attractive interaction is widespread, having been observed for single polyelectrolyte chains as well as for polyelectrolytes grafted to surfaces (polyelectrolyte brushes) and charged polymeric networks. In all cases, adding salt weakens the interaction considerably. We discuss the suggestion that the attractive force at low salinity originates from the asymmetry of interaction between charged polymer segments and charged patches on the surface of the protein globule. This can be explained if the attractive force is mainly due to a counterion release force, i.e., the polyelectrolyte chains become the multivalent counterions for the patches of opposite charge localized on the surface of the proteins. We review a selection of simple models that lead to semi-quantitative estimates of this force as the function of salt concentration.     

Effect of mixing on the formation of complexes of hyperbranched cationic polyelectrolytes and anionic surfactants

The effect of different mixing protocols on the charged nature and size distribution of the aqueous complexes of hyperbranched poly(ethylene imine) (PEI) and sodium dodecyl sulfate (SDS) was investigated by electrophoretic mobility and dynamic light scattering measurements at different pH values, polyelectrolyte concentrations, and ionic strengths. It was found that at large excess of the surfactant a colloidal dispersion of individual PEI/SDS nanoparticles forms via an extremely rapid mixing of the components by means of a stop-flow apparatus. However, the application of a less efficient mixing method under the same experimental conditions might result in large clusters of the individual PEI/SDS particles as well as in a more extended precipitation regime compared with the results of stop-flow mixing protocol. The study revealed that the larger the charge density and concentration of the PEI, the more pronounced the effect of mixing becomes. It can be concluded that an efficient way to avoid precipitation in the solutions of oppositely charged polyelectrolytes and surfactants might be provided by extending the range of kinetically stable colloidal dispersion of polyelectrolyte/surfactant nanoparticles via the application of appropriate mixing protocols.     

Adsorption of poly(vinyl formamide-co-vinyl amine) onto silica particle surfaces and stability of the formed hybrid materials

In order to produce silica/polyelectrolyte hybrid materials the adsorption of the polyelectrolyte poly(vinyl formamide-co-vinyl amine), P(VFA-co-VAm) was investigated. The adsorption of the P(VFA-co-VAm) from an aqueous solution onto silica surface is strongly influenced by the pH value and ionic strength of the aqueous solution, as well as the concentration of polyelectrolyte. The adsorption of the positively charged P(VFA-co-VAm) molecules on the negatively charged silica particles offers a way to control the surface charge properties of the formed hybrid material. Changes in surface charges during the polyelectrolyte adsorption were studied by potentiometric titration and electrokinetic measurements. X-ray photoelectron spectroscopy (XPS) was employed to obtain information about the amount of the adsorbed polyelectrolyte and its chemical structure. The stability of the adsorbed P(VFA-co-VAm) was investigated by extraction experiments and streaming potential measurements. It was shown, that polyelectrolyte layer is instable in an acidic environment. At a low pH value a high number of amino groups are protonated that increases the solubility of the polyelectrolyte chains. The solvatation process is able to overcompensate the attractive electrostatic forces fixing the polyelectrolyte molecules on the substrate material surface. Hence, the polyelectrolyte layer partially undergoes dissolving process.     

Adsorption of Polyelectrolyte-Nanoparticle Systems on Silica: Influence on Interaction Forces

In this work, we have studied the interfacial properties of cationic polyelectrolyte (PE) and silica nanoparticle (NP) systems at macroscopic silica surfaces by means of ellipsometry. The influence of adsorbed layers on the interactions between silica surfaces was also investigated using the bimorph surface force apparatus. Added nanoparticles were observed to strongly swell the interfacial polyelectrolyte layers, an effect partly related to neutralization of charged polyelectrolyte groups. The effect was more pronounced for low charged than for highly charged polyelectrolytes. Overall, the presence of nanoparticles seemed to increase the repulsive interaction measured between silica surfaces. The force measured on approach was long range and quite strongly repulsive. On separation, an attractive bridging interaction was measured for polyelectrolyte-covered surfaces. For the low charged polyelectrolyte used in the study, the force turned repulsive on addition of nanoparticles. For the highly charged polyelectrolyte used, a change from a very strong attraction (involving a jump of the surfaces out of contact) to a very long-range elastic attractive force was observed on adding nanoparticles. The long-range elastic force indicates that polymer chains and nanoparticles form a transient network in the gap between the surfaces. The observed difference in the outward force curves may explain why the addition of nanoparticles appears to improve, e.g., shear-resistance and reflocculation characteristics of polymeric flocculants. Copyright 2000 Academic Press.     

Molecular dynamics simulations of polyelectrolyte multilayering on a charged particle

Molecular dynamics simulations of polyelectrolyte multilayering on a charged spherical particle revealed that the sequential adsorption of oppositely charged flexible polyelectrolytes proceeds with surface charge reversal and highlighted electrostatic interactions as the major driving force of layer deposition. Far from being completely immobilized, multilayers feature a constant surge of chain intermixing during the deposition process, consistent with experimental observations of extensive interlayer mixing in these films. The formation of multilayers as well as the extent of layer intermixing depends on the degree of polymerization of the polyelectrolyte chains and the fraction of charge on its backbone. The presence of ionic pairs between oppositely charged macromolecules forming layers seems to play an important role in stabilizing the multilayer film.     

Human serum albumin self-assembly on weak polyelectrolyte multilayer films structurally modified by pH changes

Adsorption of proteins onto film surfaces built up layer by layer from oppositely charged polyelectrolytes is a complex phenomenon, governed by electrostatic forces, hydrogen bonds, and hydrophobic interactions. The amounts of the interacting charges, however, both in polyelectrolytes and in proteins adsorbed on such films are a function of the pH of the solution. In addition, the number and the accessibility of free charges in proteins depend on the secondary structure of the protein. The subtle interplay of all these factors determines the adsorption of the proteins onto the polyelectrolyte film surfaces. We investigated the effect of these parameters for polyelectrolyte films built up from weak "protein-like" polyelectrolytes (i.e., polypeptides), poly(L-lysine) (PLL), and poly(glutamic acid) (PGA) and for the adsorption of human serum albumin (HSA) onto these films in the pH range 3.0-10.5. It was found that the buildup of the polyelectrolyte films is not a simple function of the pure charges of the individual polyelectrolytes, as estimated from their respective pKa values. The adsorption of HSA onto (PLL/PGA)n films depended strongly on the polyelectrolyte terminating the film. For PLL-terminated polyelectrolyte films, at low pH, repulsion, as expected, is limiting the adsorption of HSA (having net positive charge below pH 4.6) since PLL is also positively charged here. At high pH values, an unexpected HSA uptake was found on the PGA-ending films, even when both PGA and HSA were negatively charged. It is suggested that the higher surface rugosity and the decrease of the alpha-helix content at basic pH values (making accessible certain charged groups of the protein for interactions with the polyelectrolyte film) could explain this behavior.     

Adsorption behavior of hydrophobically modified polyelectrolytes onto amino- or methyl-terminated surfaces

The adsorption of hydrophobically modified polyelectrolytes derived from poly(maleic anhydride-alt-styrene) (P(MA-alt-St)) containing in their side chain aryl-alkyl groups onto amino- or methyl-terminated silicon wafers was investigated. The effect of the spacer group, the chemical nature of the side chain, molecular weight of polyelectrolyte, and ionic strength of solution on the polyelectrolyte adsorbed amount was studied by null ellipsometry. The adsorbed amount of polyelectrolyte increased with increasing ionic strength, in agreement with the screening-enhanced adsorption regime, indicating that hydrophobic interactions with the surface play an important role in the adsorption process. At constant ionic strength, the adsorbed amount was slightly higher for polyelectrolytes with larger alkyl side chain and decreased with the hydrophobicity of aryl group. The adsorption behavior is discussed in terms of the side chain flexibility of the polymer. Characteristics of the adsorbed layer were studied by atomic force microscopy (AFM) and contact angle measurements. AFM images show the presence of aggregates and closed globular structure of polyelectrolyte onto the amino- or methyl-terminated surface, which agrees with a 3D and 2D growth mechanism, respectively. Fluorescence measurements showed that the aggregation of polyelectrolyte containing the hydrophobic naphthyl group occurs already in the solution. However, the aggregation of polyelectrolytes containing the phenyl group in its side chain is not observed in solution but is induced by the amino-terminated surface. This difference can be explained in terms of the higher flexibility of side chain bearing the phenyl group. The polyelectrolyte films showed a high chemical heterogeneity and moderate hydrophobicity.     

Polyion interchange reactions of interpolyelectrolyte complexes in aqueous solutions and gels

Cooperative coupling reaction between two opposite charged polyelectrolytes results in formation of polyelectrolyte complexes (IPEC). This reaction is very fast and diffusion controlled. Whether IPECs formed by linear polyions are soluble or limitary swellable in aqueous media is decided by their composition, namely, by a ratio of oppositely charged polyions as well as by a water phase composition (the nature and the concentration of a simple salt, pH, the presence and the concentration of organic additives etc.). The most important intrinsic property of IPECs is their ability to participate in interchange (exchange and substitution) reactions with competing polyions. The kinetics and the position of equilibria in these reactions are controlled by the low molecular salt concentration, the nature of small counterions, DP of interaction polyelectrolytes, as well as by their linear charge density. IPECs can be formed also by interacting linear and opposite charged networks. It is shown that linear polyelectrolytes dissolved in aqueous solution can penetrate unexpectedly fast into oppositely charged cross-linked polyelectrolyte gels to form “snake-in-cage” composites representing IPECs of corresponding polyion segments. It is proved that the mechanism consists in “relay-race” transfer of linear polyion segments from one segment of the polyelectrolyte network to the other via interpolyelectrolyte exchange reaction. The driving force for the fast transport of linear polyions into the gel is produced by coupling reaction between two polyelectrolytes proceeding on solution/gel interface.     

Manipulation of the adsorption of ionic surfactants onto hydrophilic silica using polyelectrolytes

This paper demonstrates the use of polyelectrolytes to modify and manipulate the adsorption of ionic surfactants onto the hydrophilic surface of silica. We have demonstrated that the cationic polyelectrolyte poly(dimethyl diallylammonium chloride), poly-dmdaac, modifies the adsorption of cationic and anionic surfactants to the hydrophilic surface of silica. A thin robust polymer layer is adsorbed from a dilute polymer/surfactant solution. The resulting surface layer is cationic and changes the relative affinity of the cationic surfactant hexadecyl trimethylammonium bromide, C16TAB, and the anionic surfactant sodium dodecyl sulfate, SDS, to adsorb. The adsorption of C16TAB is dramatically reduced. In contrast, strong adsorption of SDS was observed, in situations where SDS would normally have a low affinity for the surface of silica. We have further shown that subsequent adsorption of the anionic polyelectrolyte sodium poly(styrene sulfonate), Na-PSS, onto the poly-dmdaac coated surface results in a change back to an anionic surface and a further change in the relative affinities of the cationic and anionic surfactants for the surface. The relative amounts of C16TAB and SDS adsorption depend on the coverage of the polyelectrolyte, and these preliminary measurements show that this can be manipulated.     

Mucin-chitosan complexes at the solid-liquid interface: multilayer formation and stability in surfactant solutions

The adsorption of a biologically important glycoprotein, mucin, and mucin-chitosan complex layer formation on negatively charged surfaces, silica and mica, have been investigated employing ellipsometry, the interferometric surface apparatus, and atomic force microscopy techniques. Particular attention has been paid to the effect of an anionic surfactant sodium, dodecyl sulfate (SDS), with respect to the stability of the adsorption layers. It has been shown that mucin adsorbs on negatively charged surfaces to form highly hydrated layers. Such mucin layers readily associate with surfactants and are easily removed from the surfaces by rinsing with solutions of SDS at concentrations > or =0.2 cmc (1 cmc SDS in 30 mM NaCl is equal to 3.3 mM). The mucin adsorption layer is negatively charged, and we show how a positively charged polyelectrolyte, chitosan, associates with the preadsorbed mucin to form mucin-chitosan complexes that resist desorption by SDS even at SDS concentrations as high as 1 cmc. Thus, a method of mucin layer protection against removal by surfactants is offered. Further, we show how mucin-chitosan multilayers can be formed.     

Preparation of stable electroneutral nanoparticles of sodium dodecyl sulfate and branched poly(ethylenimine) in the presence of pluronic F108 copolymer

Mixing of polyelectrolyte solutions with solutions of oppositely charged surfactants usually leads to phase separation in a certain concentration range. However, since the charge-neutralized polyelectrolyte/surfactant nanoparticles might be utilized as versatile nanocarriers of different substances, it would be desirable to prevent their aggregation for some applications. As it was revealed in earlier investigations, the complete suppression of precipitation may be achieved only in mixtures of ionic surfactants and appropriate copolymer polyelectrolytes with nonionic and ionic blocks. In this work, we present a method that could prevent phase separation in mixtures of homopolyelectrolytes and oppositely charged surfactants. Specifically, it is shown that nonaggregating electroneutral nanocomplexes of branched poly(ethylenimine) (PEI) and sodium dodecyl sulfate (SDS) can be prepared in the presence of the amphiphilic triblock copolymer Pluronic F108, provided that an adequate mixing protocol is used for preparation of the PEI/SDS/F108 mixtures.