Sonochemical synthesis of stable hydrosol of Fe3O4 nanoparticles

The sonolysis of an aqueous solution of Fe(CO)(5) in the presence of sodium dodecyl sulfate leads to the formation of a stable hydrosol of amorphous Fe(3)O(4) nanoparticles. The amorphicity of iron oxide nanoparticles was determined by X-ray diffraction and differential scanning calorimetry. The nanoparticles were characterized by elemental analysis, EDX, transmission electron microscopy, dynamic light scattering, Raman spectroscopy, XPS, and spot test.     

Immobilized VOsalpr on modified Fe3O4 nanoparticles as a magnetically separable epoxidation catalyst

Fe₃O₄ nanoparticles were prepared and modified with chloropropyl trimethoxysilane (Cl-PTMS). The N,N′-bis(3-salicylidenaminopropyl)amine (salpr) Schiff base ligand was then immobilized on modified Fe₃O₄, which was followed by the addition of VOSO₄ in order to complex it with immobilized sa0lpr. The obtained nanocatalyst designated as VO(Salpr)/SCMNPs was characterized by FT–IR, XRD, SEM, TEM, and VSM techniques. It was found that VO(salpr)/SCMNPs successfully catalyze the epoxidation of allyl alcohols, such as limonene, 1-octene-3-ol, trans-2-hexene-1-ol and geraniol with 50 to 100% conversion and 62 to 100% selectivity with tert-butylhydroperoxide (TBHP). The study of this catalyst's stability and reusability revealed that VO(salpr)/SCMNPs behaves heterogeneously with no desorption during the course of the epoxidation reactions.     

One-pot synthesis of Ag-Fe3O4 nanocomposite: a magnetically recyclable and efficient catalyst for epoxidation of styrene

With the assistance of PVP, a novel magnetically recyclable Ag-based catalyst has been synthesized in one pot, and it is found that this catalyst is highly efficient in selectively catalyzing styrene conversion to styrene oxide.     

One-pot solvothermal synthesis of FePt/Fe3O4 core-shell nanoparticles

Via a facile, one-pot solvothermal synthesis, highly uniform FePt/Fe3O4 core-shell nanoparticles are successfully developed, which further demonstrates their superiority in the MR imaging of living cells.     

Study on the adsorption of DNA on Fe3O4 nanoparticles and on ionic liquid-modified Fe3O4 nanoparticles

We have investigated the adsorption of herring sperm DNA on Fe₃O₄ magnetic nanoparticles (NPs) before and after modification with the ionic liquid 1-hexyl-3-methylimidazolium bromide. Experiments were performed in a batch mode, and the effects of DNA concentration, pH of the sample solution, ionic strength, temperature, and contact time between reagents were optimized. An evaluation of the adsorption isotherm revealed that the Langmuir model better fits the equilibrium data than the Freundlich model. The maximum adsorption capacities of the unmodified and modified NPs, respectively, were found to be 11.8 and 19.8 mg DNA per gram of adsorbent. The adsorption of DNA onto the modified NPs was endothermic, while it was exothermic in the case of the unmodified NPs. The DNA can be desorbed from the modified surfaces of the NPs by using EDTA as the eluent. The NPs were able to adsorb about 90?±?1.5 % of DNA after being recycled for three times. The method is simple, fast, robust, and does not require organic solvents or sophisticated equipment.

Innovative synthesis of citrate-coated superparamagnetic Fe3O4 nanoparticles and its preliminary applications

In this study, we describe the development of a facile and effective route for the synthesis of Fe(3)O(4)-based T(1) contrast agent, which can be useful for in vivo magnetic resonance (MR) imaging. Citrate-coated Fe(3)O(4) nanoparticles (6 nm) with a narrow size distribution were synthesized by "one-pot green chemistry route" in diethylene glycol (DEG) solvent. The synthesized nanoparticles were characterized by different analytical techniques including XRD, TEM, HRTEM, and FTIR. At room temperature, nanoparticles exhibited superparamagnetic nature with high saturation magnetization. The longitudinal (r(1)) and transverse (r(2)) relaxivities were found to be 35.45 and 51.81 mM(-1)s(-1), respectively. Contrast agent developed by this method showed a relatively higher longitudinal relaxivity (r(1)) and the lowest relaxivity ratio (r(2)/r(1)=1.46) at 3T MR field. The anionic nature of citric acid facilitated non-specific internalization without impairment of cell viability and functionality. The in vitro studies showed both phagocitic and non-phagocytic uptake of these NPs. In vivo MR imaging of swine showed both T(1) and T(2) contrast effect.     

Monodispersed core-shell Fe3O4@Au nanoparticles

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.     

Synthesis of Fe3O4, Fe2O3, Ag/Fe3O4 and Ag/Fe2O3 nanoparticles and their electrocatalytic properties

Two important iron oxides:Fe3O4 and Fe2O3,as well as Fe3O4 and Fe2O3 nanoparticles mingling with Ag were successfully synthesized via a hydrothermal procedure.The samples were confirmed and characterized by X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).The morphology of the samples was observed by transmission electron microscopy(TEM).The results indicated Fe3O4,Fe2O3,Ag/Fe3O4 and Ag/Fe2O3 samples all were nanoparticles with smaller sizes.The samples were modified on a glassy carbon electrode and their elctrocatalytic properties for p-nitrophenol in a basic solution were investigated.The results revealed all the samples showed enhanced catalytic performances by comparison with a bare glassy carbon electrode.Furthermore,p-nitrophenol could be reduced at a lower peak potential or a higher peak current on a glassy carbon electrode modified with Ag/Fe3O4 or Ag/Fe2O3 composite nanoparticles.     

Synthesis of polymer-supported Fe3O4 nanoparticles and their application as a novel route for the synthesis of imidazole derivatives

Research on Chemical Intermediates - Cross-linked poly(4-vinylpyridine) supported Fe3O4 nanoparticles, abbreviated as [P4-VP]-Fe3O4NPs, were easily prepared as a new magnetic polymeric catalyst and...     

High-density encapsulation of Fe3O4 nanoparticles in lipid vesicles

We report a morphological study of the encapsulation of 12-nm Fe3O4 nanoparticles (NPs) in large unilamellar vesicles of dipalmitoylphosphatidylcholine (DPPC). Preparation was done by reverse-phase evaporation. Phase behavior of the NP-lipid system was studied so that the loading of NPs in vesicles could be maximized. Increasing NP concentration significantly affects the resulting lipid morphology in a manner similar to increasing lipid concentration. Optimal production of high-density NP-loaded vesicles (HNLVs) requires temperatures of 50 degrees C, higher than the main phase transition (Tm) of DPPC. The formation of fully enclosed HNLVs requires incubation times of at least hours.     

Size-dependent peroxidase-like catalytic activity of Fe3O4 nanoparticles

Peroxidase-like catalytic properties of Fe3O4 nanoparficles （NPs） with three different sizes, synthesized by chemical coprecipitation and sol-gel methods, were investigated by UV-vis spectrum analysis. By comparing Fe3O4 NPs with average diameters of 11, 20, and 150 nm, we found that the catalytic activity increases with the reduced nanoparticle size. The electrochemical method to characterize the catalytic activity of Fe3O4 NPs using the response currents of the reaction product and substrate was also developed.     

微波法制备纳米Fe3O4

纳米Fe3O4由于具有较高的表面活性和磁性能,以及纳米微粒特有的小尺寸效应、表面效应、量子效应、催化、发光特性等[1],在颜料印刷、磁流体、磁记录、催化、机械、电子等领域得到了广泛的应用[1,2]。目前,已报道的制备纳米Fe3O4的方法有很多,如:化学共沉淀法[3],微乳液法[4,5],     

Preparation and cell response of bio-mineralized Fe3O4 nanoparticles

Silk fibroin (SF)-coated Fe(3)O(4) nanoparticles (NPs) with good superparamagnetism were successfully prepared via a bio-mineralization process at room temperature. Two cell tests revealed that mineralized SF-coated Fe(3)O(4) NPs presented good cytocompatibility for L929 and osteoblast cells and higher cell density after 5 d with high concentrations of SF-coated Fe(3)O(4) NPs (up to 0.5 mg/mL). These resulted from SF surface coating on NPs, nano-surface morphology and iron ion release of Fe(3)O(4) NPs. The mineralized SF-coated Fe(3)O(4) NPs could be envisioned for various bone orthopedic and therapeutic applications, in which SF-coated NPs location is controlled through an external magnetic field to promoted bone growth.     

Synthesis of bilayer oleic acid-coated Fe3O4 nanoparticles and their application in pH-responsive Pickering emulsions

Fe(3)O(4) nanoparticles coated with oleic acid bilayer (a diameter about 12 nm) were synthesized. The structure and composition of the particles were analyzed by TEM, FTIR and TGA. The TGA experiments of the bilayer-coated particles show a distinct two-stage mass loss. Partition experiments show that the modified Fe(3)O(4) nanoparticles are affected by aqueous dispersion pH and ion strength. Accordingly, the Pickering emulsions stabilized by modified Fe(3)O(4) particles are also sensitive to pH and ion strength. The phase inversion of the emulsions occurs when 1.0013.50. The phase inversion of emulsions also can be adjusted by the ion strength. In interfacial adsorption experiments, the hydrophobic Fe(3)O(4) nanoparticles form particle clusters, while the hydrophilic particles form uniform multilayers.     

ZnO/Fe3O4 nanoparticles promoted green synthesis of pyrazolo pyrimidinones: Study of antioxidant activity

The preparation of pyrazolo pyrimidinone derivatives was performed by using five component reactions of phthalaldehyde, cyanomethylamine, electron deficient acetylenic compounds, isocyanate, hydrazine, and catalytic amounts of ZnO/Fe₃O₄-magnetic nanoparticles as a high performance catalyst under ultrasonic conditions at ambient temperature in aquause media at room temperature. It should be mentioned that this catalyst was prepared using Spinacia oleracea water extract. In addition, for investigation of antioxidant ability, radical trapping by DPPH and reducing power of ferric ion experiments was performed. As a result, synthesized compounds show excellent radical trapping by DPPH and good reducing ability of ferric ion. The current procedure has the benefits for instance excellent yield of reaction, green media, and easy separation of product and catalyst.     

Polymer-controlled synthesis of Fe3O4 single-crystal nanorods

In this study, we describe a simple approach to preparing single-crystal Fe3O4 nanorods in the presence of poly(vinylpyrrolidone) (PVP). The morphologies of the nanorods are characterized by transmission electron microscopy (TEM), which indicates that these nanorods are formed by nucleation and growth process in situ in aqueous solution. A superconducting quantum interference device (SQUID) magnetometer characteristic of the as-synthesized Fe3O4 nanorods shows superparamagnetic properties.     

Facile synthesis of superparamagnetic Fe3O4@Au nanoparticles for photothermal destruction of cancer cells

Superparamagnetic Fe(3)O(4) nanoparticles with positive surface ξ-potential were synthesized via a solvothermal route. After Fe(3)O(4) was mixed with HAuCl(4) and NaBH(4), the reduced Au nanoparticles could be directly adsorbed onto the surface of Fe(3)O(4) nanoparticles. The as-synthesized nanocomposites were successfully applied to photothermal destruction of cancer cells.     

Magnetic Pickering emulsions stabilized by Fe3O4 nanoparticles

Superparamagnetic Fe(3)O(4) nanoparticles prepared by a classical coprecipitation method were used as the stabilizer to prepare magnetic Pickering emulsions, and the effects of particle concentration, oil/water volume ratio, and oil polarity on the type, stability, composition, and morphology of these functional emulsions were investigated. The three-phase contact angle (θ(ow)) of the Fe(3)O(4) nanoparticles at the oil-water interface was evaluated using the Washburn method, and the results showed that for nonpolar and weakly polar oils of dodecane and silicone, θ(ow) is close to 90°, whereas for strongly polar oils of butyl butyrate and 1-decanol, θ(ow) is far below 90°. Inherently hydrophilic Fe(3)O(4) nanoparticles can be used to prepare stable dodecane-water and silicone-water emulsions, but they cannot stabilize butyl butyrate-water and decanol-water mixtures with macroscopic phase separation occurring, which is in good agreement with the contact angle data. Emulsions are of the oil-in-water type for both dodecane and silicone oil, and the average droplet size increases with an increase in the oil volume fraction. For stable emulsions, not all of the particles are adsorbed to drop interfaces; the fraction adsorbed decreases with an increase in the initial oil volume fraction. Changes in the particle concentration have no obvious influence on the stability of these emulsions, even though the droplet size decreases with concentration.