Accuracy and precision of a coulometric titration technique with mercaptans as test compounds

A coulometric determination of mercaptan sulfur, concentrating on the effect of quantity and structure of mercaptans on the accuracy and reproducibility of their quantitative determination, is described. A series of pure mercaptans were used as test compounds. A potentiometric endpoint detection technique was devised consisting of a sulfide-sensitive electrode as the indicator electrode and a calomel electrode as the reference electrode. A silver electrode acted as the generator anode and a platinum electrode as the cathode. The measurements were performed in an ethanolic solution of NH₄OH and NH₄NO₃ as supporting electrolytes. The accuracy of mercaptan determination corresponding to 168.20–15.00 μg of mercaptan sulfur varied from ±1 to ±4% except for sec- and tert-butyl mercaptans at their lowest concentrations. Furthermore, the presence of a branched alkane chain increased the percentage error, while the presence of a phenyl group decreased the error.     

Determination of iron by Z-GFAAS and the influence of short-term precision and long-term precision

A detailed method validation of graphite-furnace atomic absorption spectrometry (GFAAS) with Zeeman background correction was performed. The aim is to perform a detailed investigation of short-term precision as opposed to long-term precision. It was suggested that release of graphite flakes into the light path during measurement significantly influenced the performance of the method. It was found that significant deviations with respect to the certified values were frequent and an estimate of reliable uncertainties was obtained only after a high number of repetitions. Uncertainty of Interlaboratory testing was evaluated as a method to estimate uncertainties that are comparable to uncertainties that were obtained by Interlaboratory testing and to uncertainties predicted by the Horwitz curve. To a large extent, the uncertainty in measurement that was predicted by pooled calibrations corresponded to the uncertainties that were obtained from multiple determinations of unknowns. It was thus proposed that a large proportion of the difference in uncertainty in measurement between laboratories could be explained by properties of the different detectors. In order to support accuracy, it is suggested that a higher level of uncertainty should be accepted in analytical investigations.     

High precision titrimetry: An examination of the attainable precision

A re-examination and critical assessment of the mechanical precision of titrimetric processes, with particular reference to the drainage errors of burettes, has been made and some manipulative improvements suggested.The piputte-dilution method offers a useful improvement in the precision of volumetric methods, further increase in mechnical precision affords little or no improvement in accuracy of determination.     

On the K13 surface-like elastic constant An experimental method to test different theoretical models

Oldano and Barbero showed that, due to the presence of the surface-like elastic constant K₁₃ in the expression of the elastic free energy density, F₂, in a nematic liquid crystal, the functional F₂ is unbounded from below and thus it is impossible to find an equilibrium director distortion. In particular, they showed that the surface-like elastic constant favours a discontinuity of the director-field at the interfaces. In recent years two quite different theoretical approaches have been proposed to eliminate the mathematical difficulties related to the K₁₃ problem. Barbero et al., expanded the free energy functional F up to the fourth order in the director derivatives and showed that the minimization problem becomes mathematically well posed. A strong subsurface director distortion on a length scale of the order of the molecular length is predicted by using this approach. This point has been critized by V. Pergamenshchik who considers the subsurface strong distortion as an artefact of theory and proposes an alternative method to account for the effect of K_{1 3}. This method is virtually coincident with that already proposed by Hinov on the basis of an a priori assumption. In this paper we discuss some direct consequences of these two different approaches and we propose two simple experimental measurements which should lead to different results depending on which model is the correct one, allowing in this way a test of the different theoretical models.     

Natural Abundance 15N and 13C Solid‐State NMR Chemical Shifts: High Sensitivity Probes of the Halogen Bond Geometry

Solid‐state nuclear magnetic resonance (SSNMR) spectroscopy is a versatile characterization technique that can provide a plethora of information complementary to single crystal X‐ray diffraction (SCXRD) analysis. Herein, we present an experimental and computational investigation of the relationship between the geometry of a halogen bond (XB) and the SSNMR chemical shifts of the non‐quadrupolar nuclei either directly involved in the interaction (¹⁵N) or covalently bonded to the halogen atom (¹³C). We have prepared two series of X‐bonded co‐crystals based upon two different dipyridyl modules, and several halobenzenes and diiodoalkanes, as XB‐donors. SCXRD structures of three novel co‐crystals between 1,2‐bis(4‐pyridyl)ethane, and 1,4‐diiodobenzene, 1,6‐diiodododecafluorohexane, and 1,8‐diiodohexadecafluorooctane were obtained. For the first time, the change in the ¹⁵N SSNMR chemical shifts upon XB formation is shown to experimentally correlate with the normalized distance parameter of the XB. The same overall trend is confirmed by density functional theory (DFT) calculations of the chemical shifts. ¹³C NQS experiments show a positive, linear correlation between the chemical shifts and the C?I elongation, which is an indirect probe of the strength of the XB. These correlations can be of general utility to estimate the strength of the XB occurring in diverse adducts by using affordable SSNMR analysis.     

Understanding the meaning of accuracy,trueness and precision

Clear definitions of basic terms, used to describe the quality of measurements, is essential for communication among scientists as well as when reporting measurement results to clients. Even if appropriate definitions are given in international standards and guidelines, the understanding of some basic terms sometimes proves difficult. The reasons for this are various, e.g., the same words being defined rather differently in encyclopaedias and in international standards as well as concepts, well established in some languages, that may be relatively new in other national communities and at large in the international one. Here we present a matrix intended to clarify the relationships between the type of error affecting an analytical measurement, the respective qualitative concepts (performance characteristics) and their quantitative expression.

Diagnosis of Helicobacter pylori infection with the (13)C-urea breath test by means of GC-MS analysis

The diagnosis of Helicobacter pylori (H. pylori) infection by GC-MS detection of the (13)CO(2) enrichment in (13)C-urea breath test ((13)C-UBT) samples is reported. This study aimed to optimize the (13)C-UBT with regards to the diagnostic cut-off value, sampling time, and frequency. The H. pylori status of 103 dyspeptic patients was obtained by histological examination, the rapid urease test as well as with the GC-MS (13)C-UBT. Analytical and diagnostic accuracies were determined by comparison of the GC-MS (13)C-UBT results with that of the analytical and diagnostic gold standards, namely GC-isotope ratio MS (IRMS) and histology. The (13)CO(2) enrichment values obtained with GC-MS analysis, correlated favorably (r(2) = 0.993) with those obtained by GC-IRMS analysis. When compared to histology, the GC-MS (13)C-UBT had a diagnostic sensitivity of 92% and a specificity of 93%. The positive predictive value (PPV), negative predictive value (NPV), and accuracy were 95, 89, and 92%, respectively. It was concluded that SIM GC-MS is capable of analyzing nonradioactive (13)C-UBT samples, with a precision and accuracy sufficient to distinguish between H. pylori positive and negative patients.     

Carbon Atoms Speaking Out: How the Geometric Sensitivity of 13C Chemical Shifts Leads to Understanding the Colour Tuning of Phycocyanobilin in Cph1 and AnPixJ

We present a combined quantum mechanics/molecular mechanics (QM/MM) molecular dynamics–statistical approach for the interpretation of nuclear magnetic resonance (NMR) chemical shift patterns in phycocyanobilin (PCB). These were originally associated with colour tuning upon photoproduct formation in red/green-absorbing cyanobacteriochrome AnPixJg2 and red/far-red-absorbing phytochrome Cph1Δ2. We pursue an indirect approach without computation of the absorption frequencies since the molecular geometry of cofactor and protein are not accurately known. Instead, we resort to a heuristic determination of the conjugation length in PCB through the experimental NMR chemical shift patterns, supported by quantum chemical calculations. We have found a characteristic correlation pattern of 13C chemical shifts to specific bond orders within the π-conjugated system, which rests on the relative position of carbon atoms with respect to electron-withdrawing groups and the polarisation of covalent bonds. We propose the inversion of this regioselective relationship using multivariate statistics and to apply it to the known experimental NMR chemical shifts in order to predict changes in the bond alternation pattern. Therefrom the extent of electronic conjugation, and eventually the change in absorption frequency, can be derived. In the process, the consultation of explicit mesomeric formulae plays an important role to qualitatively account for possible conjugation scenarios of the chromophore. While we are able to consistently associate the NMR chemical shifts with hypsochromic and bathochromic shifts in the Pg and Pfr, our approach represents an alternative method to increase the explanatory power of NMR spectroscopic data in proteins.     

Relation between Electric Spark Sensitivity and Impact Sensitivity of Nitroaromatic Energetic Compounds

Impact and electric spark sensitivities of energetic compounds are two important sensitivity parameters, which are closely related to many accidents in working places. In contrast to electric spark sensitivity, impact sensitivity can be easily measured. A new simple method is introduced to correlate electric spark and impact sensitivities of nitroaromatic compounds. Two correcting functions are used to consider several molecular moieties for reliable prediction of electric spark sensitivity through the measured or estimated impact sensitivity of nitroaromatics. The model is optimized using a set of 28 CHNO polynitroaromatic explosives and then it is tested for some nitroaromatics containing the other atoms such as sulfur. The predicted electric sensitivities of the new method are also compared with the reported results of a new quantum mechanical approach. For 22 CHNO nitroaromatics, quantum mechanical calculations are within ±3.0 J of 18 measured values and more than ±3.0 J for remaining 4 experimental data. Meanwhile, the predicted results of the method are less than ±3.0 J for 28 CHNO nitroaromatics. The root‐mean‐square (rms) deviations of the new model and quantum mechanical are also 1.55 and 2.51 J, respectively.     

Accuracy and precision of natural gas analysis

Summary Calculations of natural gas properties from chromatographic analysis is increasingly popular. An application of the significance of the various sources of error allows the overall uncertainty of the analytical procedure to be evaluated. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984