Rapid detection of Aspergillus flavus contamination in peanut with novel delayed luminescence spectra

Employing a luminescence spectrometer the usefulness of light-induced delayed luminescence (DL) for the detection of aflatoxinB1 (AfB1) contamination in whole peanut was studied. Peanut was artificially contaminated with Aspergillus flavus (7.5 x 10(5)conidia/mL) and incubated for 0-72 h. The DL and fluorescence spectra of contaminated peanut were obtained by a luminescence spectrometer. The correlation between the spectra and contamination levels was established. The DL and fluorescence intensity has a negative correlation with the AfB1 concentration. Our results suggested that the DL technique might be useful for the rapid and noninvasive evaluation of AfB1 contamination levels in whole peanut.     

Preparation and characterization of affinity sorbents based on isoalloxazine-like ligands for separation of flavoenzymes

Affinity ligands for flavoenzymes were synthesized based on the natural structure of flavo-coenzymes. Two typical flavoenzymes, cholesterol oxidase from Brevibacterium sp. and xanthine oxidase from bovine milk, were employed as standard enzymes. Fluorescent probes were synthesized from eight isoalloxazine-like chemicals and 5-aminofluorescein. Probe-enzyme interactions were analyzed via fluorescence spectra. Chemicals with high binding abilities to flavoenzymes were coupled with Sepharose through spacers composed of epichlorohydrin, ethylenediamine, 1,3-diaminopropane, 2-hydroxy-1,3-diaminopropane, and 1,4-diaminobutane, and subjected to adsorption analysis with flavoenzymes. The results indicated that ligands synthesized from 2,4-dioxohexahydropyrimidine-5-carboxylic acid, cytosine, 7-chloroalloxazine, and 8-chloroalloxazine had high binding abilities to the flavoenzymes. The affinity sorbent based on these ligands revealed a high theoretical maximum adsorption (Q(max)). Protein and bioactivity recoveries were tested after one step of affinity binding via chromatographic analysis on small columns. Results showed that ligands linked with sorbents through long hydrophilic spacers had higher activity recoveries.     

Sol-gel immunoaffinity chromatography for the clean up of ochratoxin A contaminated grains

This paper describes the application of sol-gel immunoaffinity columns for clean up of ochratoxin A contaminated cereal crops. Monoclonal antibodies selective for OTA have been entrapped into the pores of a sol-gel matrix in order to prepare immunoaffinity columns. Different parameters such as amount of entrapped antibodies and loading conditions were optimized to obtain highest possible recoveries of OTA. The method has been found to be a suitable tool in sample preparation prior to HPLC-FLD determination and as selective as conventional commercially available immunoaffinity columns. In the clean up of different cereals mean recoveries of 82±5%, 90±6% and 91±3%, were obtained for wheat, barley and rye, respectively, with sol-gel columns containing 1mg of anti-OTA antibodies. The detection limit (signal-to-noise ratio, 3) was 0.5 μg/kg and the limit of quantification (signal-to-noise ratio, 10) determined to be 1 μg/kg. Sol-gel columns can be reused 7 times without significant loss of recovery. After 10 applications the recovery decreased to approx. 50%.     

Transport of N-CD and Pre-Sorbed Pb in Saturated Porous Media

Carbon dots (CDs) are a new type of nanomaterials of the carbon family with unique characteristics, such as their small size (e.g., <10 nm), high water solubility, low toxicity, and high metal affinity. Modification of CDs by Nitrogen functional groups (N-CDs) enhances their metal adsorption capacity. This study investigated the influences of pH (4, 6, and 9), ionic strength (1, 50, and 100 mM), and cation valency (Na⁺ and Ca²⁺) on the competitive adsorption of Pb to quartz and N-CD surfaces, the transport and retention of N-CDs in saturated porous media, and the capacity of N-CDs to mobilize pre-adsorbed Pb in quartz columns. Pb adsorption was higher on N-CDs than on quartz surfaces and decreased with increases in ionic strength (IS) and divalent cations (Ca²⁺) concentration. N-CD mobility in quartz columns was highest at pH of 9- and 1-mM monovalent cations (Na⁺) and decreased with decreases in pH and increases in ionic strength and ion valency. N-CDs mobilized pre-adsorbed Pb from quartz due to the higher adsorption affinity of Pb to N-CD than to quartz surfaces. These findings provide valuable insights into the transport, retention, and risk assessment of lead in the presence of carbon-based engineered nanoparticles.     

Breakthrough Model of Recombinant Human-Like Collagen in Immobilized Metal Affinity Chromatography

The adsorption of recombinant human-like collagen by metal chelate media was investigated in a batch reactor and in a fixed-bed column. The adsorption equilibrium and kinetics had been studied by batch adsorption experiments. Equilibrium parameters and protein diffusivities were estimated by matching the models with the experimental data. Using the parameters of equilibrium and kinetics, various models, such as axial diffusion model, linear driving force model, and constant pattern model, were used to simulate the breakthrough curves on the columns. As a result, the most suitable isotherm was the Langmuir–Freundlich model, and the ionic strength had no effect on the adsorption capacity of chelate media. In addition, the pore diffusion model fitted very well to the kinetic data. The pore diffusivities decreased with increasing the initial protein concentration, however had little change with the ionic strength. The results also indicated that the models predict breakthrough curves reasonably well to the experimental data, especially at low initial protein concentration (0.3 mg ml⁻¹) and low flow rate (34 cm h⁻¹). By the results, we optimized the experimental conditions of a chromatographic process using immobilized metal affinity chromatography to purify recombinant human-like collagen.     

Regeneration of a silica monolithic rod column using harsh methods followed by firm thermodynamic and kinetic validation

In this study, a numerical tool is introduced—based on thermodynamic and kinetic separation theory—for validating the regeneration of monolithic rod columns after cutting their inlet sections. A long‐used RP‐18e monolithic column was deemed to be unfit for further coffee analysis because of poor separation performance. The columns brownish inlet section was physically removed with a lathe, leaving a clean white inlet section. The original and regenerated columns were extensively analyzed and compared using numerical tools for processing adsorption data. The perturbation peak method was used to measure the adsorption isotherm of phenol on the original and regenerated monolith and the adsorption energy distributions were calculated for identifying any change in the degree of heterogeneity. Although peak shapes improved considerably after regeneration, no significant differences were found in the detailed characterization of the processed adsorption data between the original column and the regenerated one. This indicates that the removal of a section of the monolithic bed can be undertaken without damaging the column and columns in which their inlet head sections are contaminated may still function with normal adsorption behavior. In addition, the combined thermodynamic and kinetic methodology could accurately be used to evaluate any regeneration method of columns.     

Membrane affinity chromatography for analysis and purification of biopolymers

Summary Affinity columns suitable for HPLC were prepared by immobilization of various ligands of protein A, human IgG, human IgM and pectinase on GMA modified cellulose membrane. The adsorption capacity, affinity efficiency and activity recovery of various IgGs on these affinity columns were measured. It was observed that the length of the coupling arm plays a very important role in affinity efficiency, and the effect of eluent flow-rate on adsorption capacity was very small. The protein A column was exploited for the process monitoring of dog IgG in clinical experiments on immuno-adsorption therapy. A pectinase column was used for the determination of polygalacturonase inhibiting proteins first purified on a hydroxyapatite column. It took only about 2.5 min for analysis at a flow-rate of 1.0 mL min⁻¹. The high speed analysis of biopolymers could be performed at a flow rate of 6.0 mL min⁻¹ within 15 s. Membrane affinity chromatography gives good reproducibility, high efficiency, low column-pressure and is rapid. It can also be used for micro-scale purification of biopolymers.     

高效液相色谱柱清洗与再生方法

分别对反相、正相、离子交换、体积排阻及亲和等色谱柱的清洗与再生方法加以系统综述.使用适当的方法对受污染的色谱柱进行清洗与再生,可恢复其部分分离能力,延长使用寿命.对硅胶基质反相色谱柱,可选择一系列溶剂,按洗脱能力逐渐增强的顺序依次冲洗,或者使用二甲基甲酰胺、乙酰丙酮、SDS及盐酸胍等强洗脱试剂清洗;硅胶基质正相色谱柱用极性逐渐增强的溶剂系统冲洗;有机聚合物、石墨碳及氧化锆固定相色谱柱,用稀酸、稀碱和有机溶剂结合清洗,可将受污染的色谱柱柱效提高50%以上.     

Simultaneous determination of four aflatoxins and ochratoxin A in ginger and related products by HPLC with fluorescence detection after immunoaffinity column clean‐up and postcolumn photochemical derivatization

Ginger, a widely used spice and traditional Chinese medicine, is prone to be contaminated by mycotoxins. A simple, sensitive, and reproducible method based on immunoaffinity column clean‐up coupled with HPLC and on‐line postcolumn photochemical derivatization with fluorescence detection was developed for the simultaneous determination of aflatoxins (AFs) B₁, B₂, G₁, G₂, and ochratoxin A (OTA) in 25 batches of gingers and related products marketed in China for the first time. The samples were first extracted by ultrasonication with methanol/water (80:20, v/v) and then cleaned up with immunoaffinity columns for analysis. Under the optimized conditions, the LODs and LOQs for the five mycotoxins were 0.03–0.3 and 0.1–0.9 μg/kg, respectively. The average recoveries ranged from 81.3–100.8% for AFs and from 88.6–99.5% for OTA at three spiking levels. Good linearity was observed for the analytes with correlation coefficients all >0.9995. All moldy gingers were contaminated with at least one kind of the five investigated mycotoxins, while none of them were found in normal gingers. Ginger powder samples were contaminated slightly with the contamination levels below the LOQs, while ginger tea bags were mainly contaminated by OTA at 1.05–1.19 μg/kg and ginger black tea bags were mainly contaminated by AFs at 3.37–5.76 μg/kg. All the contamination levels were below the legally allowable limits.     

蛋白A连续床亲和毛细管色谱柱的制备及性能考察

人免疫球蛋白 G(HIg G)是一种重要的生物大分子 ,是人血浆中的主要成分之一 ,通常采用免疫学的方法测定 .蛋白 A(Protein A)与免疫球蛋白 (HIg G)的 Fc区之间具有很强的特异性亲和作用 ,因而固载蛋白 A的亲和介质可用于免疫球蛋白及单克隆抗体的分离、纯化和分析测定[1～ 3 ] .根据固定相存在形式的不同 ,毛细管色谱柱主要有开管、填充和连续床柱 3种方式 .连续床具有相比高、易制备 (一步合成 )、孔径易控制、不需烧塞子和易改性等优点 .连续床与其它常用的亲和介质 (如球型凝胶颗粒、灌流色谱基质 [4、 5] 、膜介质 [6,7] 等 )相比具…     

Fluorescent properties of aflatoxins in organized media based on surfactants,cyclodextrins, and calixresorcinarenes

Fluorescent properties aflatoxin B1 (AfB1) and its metabolites, aflatoxins B2, G1, and G2 in the presence of surfactants, cyclodextrins, and calix[4]resorcinarenes are studied. It is found that surfactants and cyclodextrins enhance the fluorescence of aflatoxins B1 and G1. Using the example of AfB1, it is shown that the fluorescence intensity in solution attains a maximum in the presence of 2-hydroxypropyl-β-cyclodextrin. The effects observed increase the sensitivity of the fluorimetric determination of AfB1: the detection limit in water is 3.1 × 10^?8 M and decreases to 2.1 × 10^?9 M in a solution of cyclodextrin.     

Use of short monolithic columns for isolation of low abundance membrane proteins

Convective interaction media (CIM) monoliths provide a stationary phase with a high binding capacity for large molecules and are capable of high flow rates at a very low pressure drop. Used as anion- and cation-exchangers or with affinity ligands such as antibodies, these columns have the potential for processing large volumes of complex biological mixtures within a short time. In the present report, monoclonal antibodies against several rat liver plasma membrane proteins were bound and cross-linked to protein A or protein G CIM affinity columns with a bed volume of only 60 microL. Antigens recognized by bound antibodies and co-eluting (interacting) proteins were rapidly isolated in a single step from either total plasma membrane extracts or subfractions isolated using anion-exchange CIM disk-shaped columns. The isolated antigens and co-eluting proteins were subsequently identified by immunoblot or by LC-MS/MS.     

High-performance metal chelate affinity chromatography of cytochromes P-450 using Chelating Superose.

High-performance metal chelate affinity chromatography [immobilized metal ion affinity chromatography (IMAC)] using Chelating Superose (iminodiacetic acid adsorbent) was investigated for its suitability in purifying phenobarbital-induced rat liver microsomal cytochrome P-450 isozymes (P450) and optimized for preparative purposes. Starting with an 8-aminooctyl-Sepharose fraction of partially purified P450, it was found that only Ni(2+)- and Cu(2+)-charged columns could bind P450. No binding was ever observed when Zn2+, Co2+, Mn2+, Cd2+, Fe3+, Fe2+ or Tl3+ ions were employed. Of eight commonly used elution buffers, imidazole and tryptamine were found to cause some denaturation of P450. For desorption of proteins bound to Ni(2+)-charged columns, the following order of decreasing elution buffer strength was determined: cysteine approximately histidine greater than glycine greater than histamine greater than tryptophan greater than ammonium chloride. During protein desorption with some of these buffers, metal ions were found to bleed from the gel, resulting in P450 denaturation. This could be eliminated by prebleeding the charged columns prior to sample application and had an effect on product recovery and homogeneity. Ni2+ and glycine were chosen as a standard for further optimization involving sample adsorption conditions as influenced by equilibration buffer, detergent, load capacity and flow, gradient and temperature conditions. In this way, potassium phosphate (pH 7.75) and 0.4% Emulgen 911 were used to equilibrate a 1.6-ml column and purify 20-50 nmol of P450 (5-15 mg of protein) within 15 min. One gradient fraction consisted of a single sodium dodecyl sulphate-polyacrylamide gel electrophoresis band as judged by silver staining and represented about 25% of the total P450 applied to the column; total recoveries were usually more than 80%. Comparison with the molecular weights and spectral, catalytic and immunological properties of P450 forms isolated according to established procedures indicated that the form isolated here using Chelating Superose comprises mainly P450 2B1 (PB-B). A method is described for fully automated, programmable column regeneration and sample runs.     

Tuning the recovery of an Rh-containing catalyst with silica-based (poly) amine ion exchangers

Highly efficient Rh-recovery from different adsorption media has been effected with silica-based (chelating) ion exchangers containing (poly) amine functionalities; recoveries have been found to correlate well with the stability of the metal-to-ligand complexes.     

Purification of clenbuterol-like beta2-agonist drugs of new generation from bovine urine and hair by alpha1-acid glycoprotein affinity chromatography and determination by gas chromatography-mass spectrometry

The control of illegal use of clenbuterol and other β₂-agonist drugs as growth promoters in the European Union countries has led to outlaw practices for synthesizing new concept molecules, showing similar biological activity but not detectable by test methods usually employed to perform the official monitoring programmes. The synthesis schemes of some β₂-agonist compounds, formally derived from clenbuterol, were found out by Italian detective authorities. These compounds were synthesised ex novo in our laboratories: then, both their molecular structures and biological activities were characterised. In this paper, we describe different strategies for purifying some β₂-agonist drugs of new concept, more hydrophobic than clenbuterol. A two-step clean up procedure, prior to gas chromatography-mass spectrometry analysis, was developed for the multi-residue determination of these β₂-agonists from bovine hair and urine. The purification strategy we chose was based on adsorption solid phase extraction and, subsequently, on specific molecular recognition by affinity chromatography. The affinity columns were homemade by coupling bovine α₁-acid glycoprotein, a plasmatic acceptor for basic drugs, to a chromatographic support; their effectiveness for purifying new β₂-agonists was discussed. The data about method recoveries and repeatability were also reported.     

Synthesis and Evaluation of a Molecularly Imprinted Polymer for Pre-concentration of Patulin from Apple Juice

Patulin, (4-hydroxy-4H-furo[3,2-c] pyran-2(6H)-one) is a toxic secondary metabolite produced by a wide range of fungal species growing on some fruits, including apples. A novel molecularly imprinted polymer (MIP) for patulin has been synthesized using oxindole as a dummy template. The synthesis of MIPs based on dummy templates is a solution to overcome “template bleeding” shortcoming in trace analysis. The polymer was prepared in a non-covalent approach with methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linker via free radical polymerization. It was revealed that the MIP particles in extraction columns displayed high affinity towards patulin and, therefore, subsequently employed for molecularly imprinted-solid phase extraction (MIP-SPE) of patulin from contaminated apple juice samples. The analysis of spiked samples showed good recoveries (>80%). Reproducibility, repeatability, and limit of detection of the proposed method were also investigated.     

Determination of zearalenone in barley, maize and wheat flour, polenta, and maize-based baby food by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an affinity column cleanup liquid chromatography (LC) method for the determination of zearalenone (ZON) in a variety of cereals and cereal products at proposed European regulatory limits. The test portion is extracted with acetonitrile:water. The sample extract is filtered, diluted, and applied to an affinity column. The column is washed, and ZON is eluted with acetonitrile. ZON is quantified by reversed-phase LC with fluorescence detection. Barley, wheat and maize flours, polenta, and a maize-based baby food naturally contaminated, spiked, and blank (very low level) were sent to 28 collaborators in 9 European countries and 1 collaborator in New Zealand. Participants were asked to spike test portions of all samples at a ZON concentration equivalent to 100 microg/kg. Average recoveries ranged from 91-111%. Based on results for 4 artificially contaminated samples (blind duplicates) and 1 naturally contaminated sample (blind duplicate), the relative standard deviation for repeatability (RSDr) ranged from 6.9-35.8%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.4-38.2%. The method showed acceptable within- and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values <1.7.     

The preparation of high-capacity boronate affinity adsorbents by surface initiated reversible addition fragmentation chain transfer polymerization for the enrichment of ribonucleosides in serum

Boronate affinity adsorption is uniquely selective for cis-diol-containing molecules. The preparation and application of boronate affinity materials has attracted much attention in recent years. In this work, a high-capacity boronate affinity adsorbent was prepared by surface-initiated reversible addition–fragmentation chain transfer polymerization (SI-RAFT). Commercial aminated poly(glycidyl methacrylate) (PGMA) microspheres were modified with the chain transfer agent (CTA) S-1-dodecyl-S-(α,α-dimethyl-α-acetic acid)trithiocarbonate (DDATC). Boronate-affinity adsorbents were then prepared via SI-RAFT polymerization employing 3-acrylamidophenylboronic acid (AAPBA) as the monomer. The Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption and desorption measurements have proven the successful grafting of AAPBA on PGMA microspheres surface. The boronate affinity adsorbents thus prepared possess much higher adsorption capacity (99.2 µmol/g of adenosine) and both faster adsorption and desorption speed towards ribonucleosides, the adsorption and desorption could be completed in 2 min. The high selectivity of the adsorbents to ribonucleosides was verified in the presence of a large excess of deoxynucleosides. The boronate affinity adsorbents were then employed for sample pretreatment before HPLC analysis of ribonucleosides in serum. The ribonucleosides were effectively enriched by boronate affinity dispersive solid-phase extraction (BA-DSPE), with high mass recoveries and good precision. The simultaneous determination of uridine and guanosine in calf serum was achieved by utilizing the standard addition method, their contents were determined to be 170 ± 11.6 ng/mL and 39.6 ± 4.4 ng/mL respectively. The results proved that the prepared boronate affinity materials could be applied for sample pretreatment of cis-diol containing molecules in biological samples.     

Boronate affinity adsorption of cis‐diol‐containing biomolecules in nonaqueous solvent

Boronate affinity has attracted much attention in recent years. It has been broadly used for selective isolation and enrichment of cis‐diol‐containing molecules. Conventionally, the cis‐diols are adsorbed in mild alkaline aqueous solutions. In this work, for the first time, we found that boronate affinity adsorption could also be performed in nonaqueous solvent at nonbasic pH. Cis‐diol‐containing compounds present in herbal medicines were used for the adsorption test. The results indicated that all compounds obtained higher recoveries in the organic solvents (methanol, acetonitrile, ethyl acetate) compared with alkaline buffer. The adsorption of vicinal cis‐diol‐containing molecules in organic solvents could be accomplished rapidly, with high selectivity and high recoveries (>80%). These results shed light on the possibility of boronate affinity adsorption in nonaqueous solvents. The results are very important for the isolation and enrichment of cis‐diols, which have poor solubility in water, especially for those in herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

Adsorption and biotransformation of 17β-estradiol in biological activated carbon adsorbers

As the first systematic study dealing with the adsorption of estrogens by granular activated carbon (GAC), the removal behavior of 17β-estradiol (E2) and its biotransformation product of estrone (E1) in fixed GAC columns was examined using four biological activated carbon (BAC) columns (BAC-1～BAC-4) generated by coating four GAC columns with detached microorganisms from the riverbed sediment of a representative drinking river water source containing lower content of natural organic matter (NOM). For comparison, parallel adsorption experiments were also performed using another four GAC columns (GAC-1～ GAC-4) packed by strictly following the configurations of four BAC columns. Adsorption experimental results obtained by intermittently spiking E2 over a total running period about 350 days into the river water mixed with or without a peaty water containing higher content of NOM showed that E2 was readily removed by adsorption and the combined adsorption/biodegradation. The vertical profiles of E2 and E1, which have great significance for better understanding and optimization of the adsorption process for removal of human estrogens, were also obtained.