Kinetics and mechanism of chromium(III) catalyzed oxidation of 1,10-phenanthroline by alkaline permanganate

The kinetics of chromium(III) catalyzed oxidation of 1,10-phenanthroline by permanganate in alkaline medium at a constant ionic strength has been studied spectrophotometrically. The reaction between permanganate and 1,10-phenanthroline in alkaline medium exhibits 4:1 stoichiometry (KMnO₄:1,10-phenanthroline). The reaction shows first order dependence on [permanganate] and [chromium(III)] and less than unit order dependence in 1,10-phenanthroline, zero order in alkali concentrations. The results suggest the formation of a complex between the 1,10-phenanthroline and the chromium(III) which reacts further with one mole of permanganate species in the rate-determining step, resulting in the formation of a free radical, which again reacts with three moles of permangante species in a subsequent fast step to yield the products. The reaction constants involved in the mechanism were evaluated. The activation parameters were computed with respect to the slow step of the mechanism.This revised version was published online in December 2005 with corrections to the Cover Date.     

Kinetics and mechanistic aspects on electron‐transfer process for permanganate oxidation of poly(ethylene glycol) in aqueous acidic solutions in the presence and absence of Ru(III) catalyst

The kinetics and mechanism of oxidation of poly(ethylene glycol) (PEG) by the permanganate ion as a multiequivalent oxidant in aqueous perchlorate solutions at an ionic strength of 2.0 mol dm⁻³ has been investigated spectrophotometrically. The reaction kinetics was found to be of complex in nature. The pseudo–first‐order plots showed curves of inverted S‐shape, consisting of two distinct stages throughout the entire course of reaction. The first stage was relatively slow, followed by a fast reaction rate at longer time periods. The first‐order dependence in [MnO₄⁻], fractional first‐order dependence in [H⁺], and fractional first‐order kinetics in the PEG concentration for the first stage have been revealed in the absence of the Ru(III) catalyst. The influence of the Ru(III) catalyst on the oxidation kinetics has been examined. The oxidation was found to be catalyzed by the added Ru(III) catalyst. The First‐order dependence on the catalyst and zero order with respect to the oxidant concentrations have been observed. The kinetic parameters have been evaluated, and a tentative reaction mechanism consistent with the kinetic results is suggested and discussed.     

Kinetics and reactivities of ruthenium(III)- and osmium(VIII)-catalyzed oxidation of ornidazole with chloramine-T in acid and alkaline media: A mechanistic approach

Ornidazole is an antiparasitic drug having a wide spectrum of activity. Literature survey has revealed that no attention has been paid towards the oxidation of ornidazole with any oxidant from the kinetic and mechanistic view point. Also no one has examined the role of platinum group metal ions as catalysts in the oxidation of this drug. Such studies are of much use in understanding the mechanistic profile of ornidazole in redox reactions and provide an insight into the interaction of metal ions with the substrate in biological systems. For these reasons, the Ru(III)- and Os(VIII)-catalyzed kinetics of oxidation of ornidazole with chloramine-T have been studied in HCl and NaOH media, respectively at 313 K. The oxidation products and kinetic patterns were found to be different in acid and alkaline media. Under comparable experimental conditions, in Ru(III)-catalyzed oxidation the rate law is −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[H⁺]^−y[Ru(III)]^z and it takes the form −d[CAT]/dt = k [CAT]_o[ornidazole]_o^x[OH⁻]^y[Os(VIII)][ArSO₂NH₂]^−z for Os(VIII)-catalyzed reaction, where x, y and z are less than unity. In acid medium, 1-chloro-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one and in alkaline medium, 1-hydroxy-3-(2-methyl-5-nitroimidazole-1-yl)propan-2-one were characterized as the oxidation products of ornidazole by GC–MS analysis. The reactions were studied at different temperatures and the overall activation parameters have been computed. The solvent isotope effect was studied using D₂O. Under identical set of experimental conditions, the kinetics of Ru(III) catalyzed oxidation of ornidazole by CAT in acid medium have been compared with uncatalyzed reactions. The relative rates revealed that the catalyzed reactions are about 5-fold faster whereas in Os(VIII) catalyzed reactions, it is around 9 times. The catalytic constant (K_C) has been calculated for both the catalysts at different temperatures and activation parameters with respect to each catalyst have been evaluated. The observed experimental results have been explained by plausible mechanisms. Related rate laws have been worked out.     

Kinetics and mechanism of the ruthernium(III) catalyzed oxidation of propane-1,3-diol by alkaline hexacyanoferrate(III)

The kinetics of oxidation of propane-1,3-diol by alkaline hexacyanoferrate (III) catalyzed by ruthenium trichloride has been studied spectrophotometrically. A reaction mechanism involving the formation of an intermediate complex between the substrate and the catalyst is proposed. In the rate-determining step this complex is attacked by hexacyanoferate(III) forming a free radical which is further oxidized.     

Kinetic, mechanistic and spectral studies for the oxidation of sulfanilic acid by alkaline hexacyanoferrate(III)

The kinetics of oxidation of sulfanilic acid (p-aminobenzenesulfonic acid) by hexacyanoferrate(III) in alkaline medium was studied spectrophotometrically. The reaction showed first order kinetics in hexacyanoferrate(III) and alkali concentrations and an order of less than unity in sulfanilic acid concentration (SAA). The rate of reaction increases with increase in alkali concentration. Increasing ionic strength increases the rate but the dielectric constant of the medium has no significant effect on the rate of the reaction. A retarding effect was observed by one of the products i.e. hexacyanoferrate(II) (HCF(II)). A mechanism involving the formation of a complex between sulfanilic acid and hexacyanoferrate(III) has been proposed. The reaction constants involved in the mechanism are evaluated. There is a good agreement between the observed and calculated rate constants under different experimental conditions. Investigations at different temperatures allowed the determination of the activation parameters with respect to the slow step of the proposed mechanism.     

Mechanistic aspects of uncatalyzed and ruthenium(III) catalyzed oxidation of dl-ornithine by copper(III) periodate complex in aqueous alkaline medium: A comparative kinetic study

The oxidation of dl-ornithine monohydrochloride (OMH) by diperiodatocuprate(III) (DPC) has been investigated both in the absence and presence of ruthenium(III) catalyst in aqueous alkaline medium at a constant ionic strength of 0.20 mol dm⁻³ spectrophotometrically. The stiochiometry was same in both the cases, i.e., [OMH]/[DPC] = 1:4. In both the catalyzed and uncatalyzed reactions, the order of the reaction with respect to [DPC] was unity while the order with respect to [OMH] was < 1 over the concentration range studied. The rate increased with an increase in [OH⁻] and decreased with an increase in [IO₄⁻] in both cases. The order with respect to [Ru(III)] was unity. The reaction rates revealed that Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. Suitable mechanisms were proposed. The reaction constants involved in the different steps of the reaction mechanisms were calculated for both cases. The catalytic constant (K_C) was also calculated for catalyzed reaction at different temperatures. The activation parameters with respect to slow step of the mechanism and also the thermodynamic quantities were determined. Kinetic experiments suggest that [Cu(H₂IO₆)(H₂O)₂] is the reactive copper(III) species and [Ru(H₂O)₅OH]²⁺ is the reactive Ru(III) species.     

Ruthenium(III)-catalyzed oxidation of thallium(i) by 12-tungstocobaltate(III) in hydrochloric acid medium

The reaction between thallium(I) and [Co^IIIW₁₂O₄₀]^5- in the presence of ruthenium(III) as catalyst proceeds viainitial outer-sphere oxidation of the catalyst to ruthenium(VI). The ruthenium(IV) thus generated will oxidize thallium(I) to an unstable thallium(II) which by reacting with oxidant gives the final product, thallium(III). The formation of ruthenium(II) by direct two-electron reduction of the catalyst by thallium(I) is thermodynamically less favorable. The reaction rate is unaffected by the [ H⁺ ], whereas it is catalyzed by chloride ion . The formation of reactive chlorocomplex,TlCl, in a prior equilibrium is the reason for the chloride ion catalysis. Increasing the relative permittivity of the medium increases the rate of the reaction, which is attributed to the formation of an outer-sphere complex between the catalyst and oxidant. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ruthenium(III) catalysed oxidation of l-leucine by a new oxidant,diperiodatoargentate(III) in aqueous alkaline medium

The kinetics of Ru(III) catalysed oxidation of l-leucine by diperiodatoargentate(III) (DPA) in alkaline medium at 298 K and a constant ionic strength of 0.60 mol dm⁻³ was studied spectrophotometrically. The oxidation products are pentanoic acid and Ag(I). The stoichiometry is [l-leucine]:[DPA] = 1:2. The reaction is of first order in Ru(III) and [DPA] and has less than unit order in both [l-leu] and [alkali]. The oxidation reaction in alkaline medium has been shown to proceed via a Ru(III)–l-leucine complex, which further reacts with one molecule of monoperiodatoargentate(III) (MPA) in a rate determining step followed by other fast steps to give the products. The main products were identified by spot test and spectral studies. The reaction constants involved in the different steps of the mechanism are calculated. The catalytic constant (K_c) was also calculated for the Ru(III) catalysed reaction at different temperatures. From the plots of log K_c versus 1/T, values of activation parameters with respect to the catalyst have been evaluated. The activation parameters with respect to the slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined. The active species of catalyst and oxidant have been identified.     

Oxidative degradation and deamination of atenolol by diperiodatocuprate(III) in aqueous alkaline medium: A mechanistic study

The kinetics of oxidation of atenolol (ATN) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 0.10 mol dm⁻³ was studied spectrophotometrically. The reaction between DPC and ATN in alkaline medium exhibits 1:2 stoichiometry (ATN:DPC). The reaction is of first order in [DPC] and has less than unit order in both [ATN] and [alkali]. However, the order in [ATN] and [alkali] changes from first order to zero order as their concentration increase. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a monoperiodatocuprate(III)–ATN complex, which decomposes slowly in a rate-determining step followed by other fast steps to give the products. The main oxidative products were identified by spot test, IR, NMR and LC–ESI-MS studies. The reaction constants involved in the different steps of the mechanism are calculated. The activation parameters with respect to slow step of the mechanism are computed and discussed, and thermodynamic quantities are also determined.     

Kinetics of the Ru(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III)

The kinetics of ruthenium(III) catalyzed oxidation of formaldehyde and acetaldehyde by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The rate of oxidation of formaldehyde is directly proportional to [Fe(CN) _3– ⁶ ] while that of acetaldehyde is proportional tok[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]}, wherek, k andk are rate constants. The order of reaction in acetylaldehyde is unity while that in formaldehyde falls from 1 to 0. The rate of reaction is proportional to [Ru(III)] _T in each case. A suitable mechanism is proposed and discussed.

---

Die Kinetik der Ru(III)-katalysierten Oxidation von Formaldehyd und Acetaldehyd mittels alkalischem Hexacyanoferrat(III)

Zusammenfassung Die Untersuchung der Kinetik erfolgte spektrophotometrisch. Die Geschwindigkeitskonstante der Oxidation von Formaldehyd ist direkt proportional zu [Fe(CN) _3– ⁶ ], währenddessen die entsprechende Konstante für Acetaldehyd proportional zuk[Fe(CN) _3– ⁶ ]/{k +k[Fe(CN) _3– ⁶ ]} ist, wobeik,k undk Geschwindigkeitskonstanten sind. Die Reaktionsordnung für Acetaldehyd ist eine erste, die für Formaldehyd fällt von erster bis zu nullter Ordnung. Die Geschwindigkeitskonstante ist in jedem Fall proportional zu [Ru(III)] _T . Es wird ein passender Mechanismus vorgeschlagen.

     

Aerobic oxidation of alcohols to aldehydes and ketones using ruthenium(III)/Et3N catalyst

A simple, efficient method for oxidation of primary and secondary alcohols to the corresponding aldehydes and ketones has been developed. Using RuCl₃/Et₃N as catalyst, the oxidation of benzyl alcohol with oxygen could be achieved with 332 h⁻¹ turnover frequency in the absence of solvent. The influence of versatile N‐containing additives on the catalytic efficiency has been discussed. The presence of minor water would substantially promote the catalytic efficiency, and its role in catalysis has been investigated in detail. The insensitive Hammett correlations of the substituted benzyl alcohols, the normal substrate isotope effect (k_H/k_D = 3.5 at 335 K), and the linear relationship between O₂ pressure and turnover frequency imply that the reoxidation of the Ru(III) hydride intermediate to the active species shares the rate‐determining step with the hydride transfer in the catalytic cycle. Copyright © 2011 John Wiley & Sons, Ltd.     

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in aqueous alkaline medium

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in alkaline medium is assumed to occurvia substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-limiting stage and yield the products with regeneration of catalyst in the subsequent fast step. The reaction exhibits fractional order in hexacyanoferrate(II) and first-order unity each in oxidant and catalyst. The reaction constants involved in the mechanism are derived.     

Osmium(VIII) catalysed and uncatalysed oxidation of aspirin drug by diperiodatocuprate(III) complex in aqueous alkaline medium: A mechanistic approach

The kinetics of oxidation of a non-steroidal analgesic drug, aspirin (ASP) by diperiodatocuprate(III)(DPC) in the presence and absence of osmium(VIII) have been investigated at 298 K in alkaline medium at a constant ionic strength of 0.10 mol dm⁻³ spectrophotometrically. The reaction showed a first-order in [DPC] and less than unit order in [ASP] and [alkali] for both the osmium(VIII) catalysed and uncatalysed reactions. The order with respect to Os(VIII) concentration was unity. The effects of added products, ionic strength, periodate and dielectric constant have been studied. The stoichiometry of the reaction was found to be 1:4 (ASP:DPC) for both the cases. The main oxidation product of aspirin was identified by spot test, IR, NMR and GC–MS. The reaction constants involved in the different steps of the mechanisms were calculated for both reactions. Activation parameters with respect to slow step of the mechanisms were computed and discussed for both the cases. The thermodynamic quantities were also determined for both reactions. The catalytic constant (K_C) was also calculated for catalysed reaction at different temperatures and the corresponding activation parameters were determined.     

Spectral and mechanistic investigations of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium

The kinetics of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium at a constant ionic strength of I = 0.10 M has been studied spectrophotometrically at 27°C. The reaction between diperiodatocuprate(III) and atenolol in alkaline medium in presence of ruthenium(III) exhibits 2: 1 stoichiometry (atenolol: diperiodatocuprate(III)). The main products were identified by spot test, IR, NMR, and LC-MS. The reaction is of first order in DPC concentrations and has less than unit order in both ATN and alkali concentrations. The order in ruthenium(III) was unity. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a ruthenium(III)-atenolol complex, which reacts with monoperiodatocuprate(III) in a rate determining step followed by other fast steps to give the products. Probable mechanism is proposed and discussed. The activation parameters with respect to the slow step of the mechanism and thermodynamic quantities were determined and discussed.     

Osmium (VIII)-mediated oxidation of arsenic (III)/antimony (III) by 1-equivalent oxidants

Os(VIII) catalysis of oxidation of As(III)/Sb(III) by 1-equivalent oxidants like Ce(IV) and Mn(III) in acid medium is studied. A multistep mechanism involving the intervention of the intermediate oxidation states of osmium is found to apply. Specific rates of different steps in the mechanism are estimated and used to calculate reaction rates which are in reasonable agreement with those of experiment.     

Kinetics and mechanism of the ruthenium(III)-catalysed oxidation of aminoalcohols by alkaline hexacyanoferrate(III)

Summary The kinetics of the ruthenium(III)-catalysed oxidation of aminoalcoholsviz. 2-aminoethanol and 3-aminopropanol by alkaline hexacyanoferrate(III) has been studied spectrophotometrically. The reactions are rapid initially, then follow a second order rate dependence with respect to each of the catalyst and the oxidant. The second order rate dependence with respect to ruthenium(III) was observed for the first time. The order in [Aminoalcohol] and [OH^–] is unity in each case. A suitable mechanism, consistent with the observed kinetic data is postulated.     

Simple and economical conversion of organic compounds with H2O2 catalyzed by ruthenium (III) chloride

Six aromatic aldehydes, two hydrocarbons, one cycloalcohol and one aromatic alcohol, viz. benzaldehyde, p‐chlorobenzaldehyde, cinnamaldehyde, 4‐methoxybenzaldehyde, o‐hydroxybenzaldehyde, 4‐hydroxy, 3‐methoxybenzaldehyde, anthracene, phenanthrene, cyclohexanol and benzyl alcohol dissolved in acetic acid, were oxidized in quantitative to moderate yields by 50% H₂O₂ in the presence of traces of RuCl₃ (substrate:catalyst ratio 85 400 to 387 500:1). Conditions for highest yields, under most economical conditions, were obtained. Higher catalyst concentrations decreased the yield. Oxidation in aromatic aldehydes is selective at aldehydic group only, and other groups remain unaffected. The extent of oxidation in phenanthrene depends on temperature or the relative amount of substrate or both. In this new, simple and economical method, which is environmentally safe and requires less time, oxocentered carboxylate species of ruthenium (III) probably catalyze the oxidation. Copyright © 2005 John Wiley & Sons, Ltd.     

Ruthenium (III) catalysed and uncatalysed oxidation of torsemide by hexacyanoferrate (III) in aqueous alkaline medium: A kinetic comparative approach

The kinetics approach of oxidation of torsemide (TOR) by hexacyanoferrate (III) [HCF (III)] has been identified spectrophotometrically at 420 ​nm in the alkaline medium in the presence and absence of catalyst ruthenium (III) at 25 ​°C, by keeping ionic strength (1 ​× ​10⁻² ​mol ​dm⁻³) constant. The reaction exhibits at the stoichiometry ratio 1:2 of TOR and HCF (III), for uncatalysed and catalysed reactions. In the absence and presence of the catalyst, the order of the reactions obtained for TOR and HCF (III) was unity. However, the rate of the reactions enhanced by the increase in the concentration of catalyst, as well as the rate increases with an increase in alkaline concentration. The activation parameters for the reaction at the slow step were identified, and the effect of temperature on the rate of the reaction was analysed. A suitable mechanism has been demonstrated by considering the obtained results. The derived rate laws are reliable with analysed experimental kinetics.