High gas sorption and metal-ion exchange of microporous metal-organic frameworks with incorporated imide groups

Metal-organic frameworks (MOFs), {[Cu(2)(bdcppi)(dmf)(2)]·10DMF·2H(2)O}(n) (SNU-50) and {[Zn(2)(bdcppi)(dmf)(3)]·6DMF·4H(2)O}(n) (SNU-51), have been prepared by the solvothermal reactions of N,N'-bis(3,5-dicarboxyphenyl)pyromellitic diimide (H(4)BDCPPI) with Cu(NO(3))(2) and Zn(NO(3))(2), respectively. Framework SNU-50 has an NbO-type net structure, whereas SNU-51 has a PtS-type net structure. Desolvated solid [Cu(2)(bdcppi)](n) (SNU-50'), which was prepared by guest exchange of SNU-50 with acetone followed by evacuation at 170 °C, adsorbs high amounts of N(2), H(2), O(2), CO(2), and CH(4) gases due to the presence of a vacant coordination site at every metal ion, and to the presence of imide groups in the ligand. The Langmuir surface area is 2450 m(2) g(-1). It adsorbs H(2) gas up to 2.10 wt% at 1 atm and 77 K, with zero coverage isosteric heat of 7.1 kJ mol(-1), up to a total of 7.85 wt% at 77 K and 60 bar. Its CO(2) and CH(4) adsorption capacities at 298 K are 77 wt% at 55 bar and 17 wt% at 60 bar, respectively. Of particular note is the O(2) adsorption capacity of SNU-50' (118 wt% at 77 K and 0.2 atm), which is the highest reported so far for any MOF. By metal-ion exchange of SNU-51 with Cu(II), {[Cu(2)(bdcppi)(dmf)(3)]·7DMF·5H(2)O}(n) (SNU-51-Cu(DMF)) with a PtS-type net was prepared, which could not be synthesized by a direct solvothermal reaction.     

Hydrogen storage in microporous metal-organic frameworks with exposed metal sites

Owing to their high uptake capacity at low temperature and excellent reversibility kinetics, metal-organic frameworks have attracted considerable attention as potential solid-state hydrogen storage materials. In the last few years, researchers have also identified several strategies for increasing the affinity of these materials towards hydrogen, among which the binding of H(2) to unsaturated metal centers is one of the most promising. Herein, we review the synthetic approaches employed thus far for producing frameworks with exposed metal sites, and summarize the hydrogen uptake capacities and binding energies in these materials. In addition, results from experiments that were used to probe independently the metal-hydrogen interaction in selected materials will be discussed.     

Mixed-ligand metal-organic frameworks with large pores: gas sorption properties and single-crystal-to-single-crystal transformation on guest exchange

Two isomorphous 3D metal-organic frameworks, {[Cu2(BPnDC)2(bpy)].8 DMF.6 H2O}n (1) and {[Zn2(BPnDC)2(dabco)].13 DMF.3 H2O}n (2), have been prepared by the solvothermal reactions of benzophenone 4,4'-dicarboxylic acid (H2BPnDC) with Cu(NO3)(2).2.5 H2O and 4,4'-bipyridine (bpy), and with Zn(NO3)(2).6 H2O and 4-diazabicyclo[2.2.2]octane (dabco), respectively. Compounds 1 and 2 are composed of paddle-wheel {M2(O2CR)4} cluster units, and they generate 2D channels with two different large pores (effective size of larger pore: 18.2 A for 1, 11.4 A for 2). The framework structure of desolvated solid, [Cu2(BPnDC)2(bpy)]n (SNU-6; SNU=Seoul National University), is the same as that of 1, as evidenced by powder X-ray diffraction patterns. SNU-6 exhibits high permanent porosity (1.05 cm3 g(-1)) with high Langmuir surface area (2910 m2 g(-1)). It shows high H2 gas storage capacity (1.68 wt % at 77 K and 1 atm; 4.87 wt % (excess) and 10.0 wt % (total) at 77 K and 70 bar) with high isosteric heat (7.74 kJ mol(-1)) of H2 adsorption as well as high CO2 adsorption capability (113.8 wt % at 195 K and 1 atm). Compound 2 undergoes a single-crystal-to-single-crystal transformation on guest exchange with n-hexane to provide {[Zn2(BPnDC)2(dabco)].6 (n-hexane).3 H2O}n (2hexane). The transformation involves dynamic motion of the molecular components in the crystal, mainly a bending motion of the square planes of the paddle-wheel units resulting from rotational rearrangement of phenyl rings and carboxylate planes of BPnDC2-.     

Selective CO2 adsorption by a triazacyclononane-bridged microporous metal-organic framework

Metal-organic frameworks constructed by self-assembly of metal ions and organic linkers have recently been of great interest in the preparation of porous hybrid materials with a wide variety of functions. Despite much research in this area and the large choice of building blocks used to fine-tune pore size and structure, it remains a challenge to synthesise frameworks composed of polyamines to tailor the porosity and adsorption properties for CO(2). Herein, we describe a rigid and microporous three-dimensional metal-organic framework with the formula [Zn(2)(L)(H(2)O)]Cl (L=1,4,7-tris(4-carboxybenzyl)-1,4,7-triazacyclononane) synthesised in a one-pot solvothermal reaction between zinc ions and a flexible cyclic polyaminocarboxylate. We have demonstrated, for the first time, that a porous rigid framework can be obtained by starting from a flexible amine building block. Sorption measurements revealed that the material exhibited a high surface area (135 m(2) g(-1)) and was the best compromise between capacity and selectivity for CO(2) over CO, CH(4), N(2) and O(2); as such it is a promising new selective adsorbent for CO(2) capture.     

Modifying cage structures in metal-organic polyhedral frameworks for H2 storage

Three isostructural metal-organic polyhedral cage based frameworks (denoted NOTT-113, NOTT-114 and NOTT-115) with (3,24)-connected topology have been synthesised by combining hexacarboxylate isophthalate linkers with {Cu(2)(RCOO)(4)} paddlewheels. All three frameworks have the same cuboctahedral cage structure constructed from 24 isophthalates from the ligands and 12 {Cu(2)(RCOO)(4)} paddlewheel moieties. The frameworks differ only in the functionality of the central core of the hexacarboxylate ligands with trimethylphenyl, phenylamine and triphenylamine moieties in NOTT-113, NOTT-114 and NOTT-115, respectively. Exchange of pore solvent with acetone followed by heating affords the corresponding desolvated framework materials, which show high BET surface areas of 2970, 3424 and 3394 m(2) g(-1) for NOTT-113, NOTT-114 and NOTT-115, respectively. Desolvated NOTT-113 and NOTT-114 show high total H(2) adsorption capacities of 6.7 and 6.8 wt%, respectively, at 77 K and 60 bar. Desolvated NOTT-115 has a significantly higher total H(2) uptake of 7.5 wt% under the same conditions. Analysis of the heats of adsorption (Q(st)) for H(2) reveals that with a triphenylamine moiety in the cage wall, desolvated NOTT-115 shows the highest value of Q(st) for these three materials, indicating that functionalisation of the cage walls with more aromatic rings can enhance the H(2)/framework interactions. In contrast, measurement of Q(st) reveals that the amine-substituted trisalkynylbenzene core used in NOTT-114 gives a notably lower H(2)/framework binding energy.     

Reticular chemistry of metal-organic polyhedra

Metal-organic polyhedra (MOPs), are discrete metal-organic molecular assemblies. They are useful as host molecules that can provide tailorable internal volume in terms of metrics, functionality, and active metal sites. As a result, these materials are potentially useful for a variety of applications, such as highly selective guest inclusion and gas storage, and as nanoscale reaction vessels. This review identifies the nine most important polyhedra, and describes the design principles for the five polyhedra most likely to result from the assembly of secondary building units, and provides examples of these shapes that are known as metal-organic crystals.     

A microporous metal-organic framework for highly selective separation of acetylene, ethylene, and ethane from methane at room temperature

A novel three‐dimensional microporous metal–organic framework Zn₄L(DMA)₄ ( UTSA‐33 , H₈L=1,2,4,5‐tetra(5‐isophthalic acid)benzene, DMA=N,N′‐dimethylacetamide) with small pores of about 4.8 to 6.5 Å was synthesized and structurally characterized as a non‐interpenetrated (4,8)‐connected network with the flu topology (Schläfli symbol: (4¹²6¹²8⁴)(4⁶)₂). The activated UTSA‐33 a exhibits highly selective separation of acetylene, ethylene, and ethane from methane with the adsorption selectivities of 12 to 20 at 296 K, which has been established exclusively by the sorption isotherms and simulated breakthrough experiments, thus methane can be readily separated from their binary and even ternary mixtures at room temperature.     

Modulated synthesis of Zr-based metal-organic frameworks: from nano to single crystals

We present an investigation on the influence of benzoic acid, acetic acid, and water on the syntheses of the Zr-based metal-organic frameworks Zr-bdc (UiO-66), Zr-bdc-NH(2) (UiO-66-NH(2)), Zr-bpdc (UiO-67), and Zr-tpdc-NH(2) (UiO-68-NH(2)) (H(2) bdc: terephthalic acid, H(2) bpdc: biphenyl-4,4'-dicarboxylic acid, H(2) tpdc: terphenyl-4,4'-dicarboxylic acid). By varying the amount of benzoic or acetic acid, the synthesis of Zr-bdc can be modulated. With increasing concentration of the modulator, the products change from intergrown to individual crystals, the size of which can be tuned. Addition of benzoic acid also affects the size and morphology of Zr-bpdc and, additionally, makes the synthesis of Zr-bpdc highly reproducible. The control of crystal and particle size is proven by powder XRD, SEM and dynamic light scattering (DLS) measurements. Thermogravimetric analysis (TGA) and Ar sorption experiments show that the materials from modulated syntheses can be activated and that they exhibit high specific surface areas. Water proved to be essential for the formation of well-ordered Zr-bdc-NH(2) . Zr-tpdc-NH(2), a material with a structure analogous to that of Zr-bdc and Zr-bpdc, but with the longer, functionalized linker 2'-amino-1,1':4',1'-terphenyl-4,4'-dicarboxylic acid, was obtained as single crystals. This allowed the first single-crystal structural analysis of a Zr-based metal-organic framework.