Titanium and niobium imido complexes stabilized by heteroscorpionate ligands

The reaction of [Ti(NR)Cl(2)(py)(3)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) with [{Li(bdmpza)(H(2)O)}(4)][bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and [{Li(bdmpzdta)(H(2)O)}(4)][bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate] affords the corresponding complexes [Ti(NR)Cl(kappa(3)-bdmpzx)(py)](x = a, R = (t)Bu 1, p-tolyl 2, 2,6-C(6)H(3)(i)Pr(2) 3; x = dta, R =(t)Bu 4, p-tolyl , 2,6-C(6)H(3)(i)Pr(2) 6), which are the first examples of imido Group 4 complexes stabilized by heteroscorpionate ligands. The solid-state X-ray crystal structure of 1 has been determined. The titanium centre is six-coordinate with three fac-sites occupied by the heteroscorpionate ligand and the remainder of the coordination sphere being completed by chloride, imido and pyridine ligands. The complexes are 1-6 fluxional at room temperature. The pyridine ortho- and meta-proton resonances show evidence of dynamic behaviour for this ligand and variable-temperature NMR studies were carried out in order to study their dynamic behaviour in solution. The complexes [Nb(NR)Cl(3)(py)(2)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) reacted with [{Li(bdmpza)(H(2)O)}(4)] and (Hbdmpze)[bdmpze = 2,2-bis(3,5-dimethylpyrazol-1-yl)ethoxide], the latter with prior addition of (n)BuLi, to give the complexes [Nb(NR)Cl(2)(kappa(3)-bdmpzx)](x = a, R =(t)Bu 7, p-tolyl 8, 2,6-C(6)H(3)(i)Pr(2) 9; x = e, R = (t)Bu 10, p-tolyl 11, 2,6-C(6)H(3)(i)Pr(2)) 12 and these are the first examples of imido Group 5 complexes with heteroscorpionate ligands. The structures of these complexes have been determined by spectroscopic methods.     

Synthesis, structure and hydrosilylation activity of neutral and cationic rare-earth metal silanolate complexes

Rare-earth metal alkyl tri(tert-butoxy)silanolate complexes [Ln{mu,eta2-OSi(O(t)Bu)3}(CH2SiMe3)2]2 (Ln = Y (1), Tb (2), Lu (3)) were prepared via protonolysis of the appropriate tris(alkyl) complex [Ln(CH2SiMe3)3(thf)2] with tri(tert-butoxy)silanol in pentane. Crystal structure analysis revealed a dinuclear structure for with square pyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta2-bridging coordination mode giving a 4-rung truncated ladder and non-crystallographic inversion centre. Addition of two equiv. of 12-crown-4 to a pentane solution of 1 or 3 respectively gave [Ln{OSi(O(t)Bu)(3)}(CH2SiMe3)2(12-crown-4)].12-crown-4 (Ln = Y (4), Lu (5)). Crystal structure analysis of 5 showed a slightly distorted octahedral geometry at the lutetium centre. The silanolate ligand adopts an eta(1)-terminal coordination mode, whilst the crown ether unit coordinates in an unusual kappa3-fashion. Reaction of 1-3 with [NEt3H]+[BPh4]- in thf yielded the cationic derivatives [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[BPh4]- (Ln = Y (6), Tb (7) and Lu (8)); coordination of crown ether led to compounds of the form [Ln{OSi(O(t)Bu)3}(CH2SiMe3)(L)(thf)n]+[BPh4]- (Ln = Y, Lu, L = 12-crown-4, n = 1 (9,10); Ln = Y, Lu, L = 15-crown-5, n = 0 (11,12)). Reaction of 1 with [NMe2PhH]+[B(C6F5)4]-, [Al(CH2SiMe3)3] or BPh3 in thf gave the ion pairs [Y{OSi(O(t)Bu)3}(CH2SiMe3)(thf)4]+[A]- ([A]- = [B(C6F5)4]- (13), [Al(CH2SiMe3)4]- (14), [BPh3(CH2SiMe3)]- (15)), whilst two equiv. [NMe2PhH]+[BPh4]- with 1 in thf produced the dicationic ion triple [Y{OSi(O(t)Bu)3}(thf)6]2+[BPh4]-2 (16). Crystal structure analysis revealed that 16 is mononuclear with pentagonal bipyramidal geometry at the yttrium centre. The silanolate ligand coordinates in an eta(1)-terminal fashion. All diamagnetic compounds have been characterized by NMR spectroscopy. 1, 3, 4, 6 and 13 were tested as olefin hydrosilylation pre-catalysts with a variety of substrates; 1 was found to be highly active in 1-decene hydrosilylation.     

Applications of bis(1-R-imidazol-2-yl)disulfides and diselenides as ligands for main-group and transition metals: kappa2-(N,N) coordination, S-S bond cleavage, and S-S/E-E (E = S, Se) bond metathesis reactions

Bis(1-R-imidazol-2-yl)disulfides, (mim(R))2 (R = Ph, Bu(t)), and diselenides, (seim(Mes))2, serve as bidentate N,N-donor ligands for main-group and transition metals. For example, [kappa2-(mim(Bu)(t))2]MCl2 (M = Fe, Co, Ni, Zn), [kappa2-(mim(Ph))2]MCl2 (M = Co, Zn), [kappa2-(mim(Bu)(t))2]CuX (X = Cl, I), and [kappa2-(seim(Mes))2]MCl2 (M = Fe, Co, Ni) are obtained by treatment of (mim(Bu)(t))2 or (seim(Mes))2 with the respective metal halide and have been structurally characterized by X-ray diffraction. On the other hand, the zerovalent nickel complex Ni(PMe3)4 effects cleavage of the disulfide bond of (mim(Bu)(t))2 to give square-planar trans-Ni(PMe3)2(mim(Bu)(t))2 in which the (mim(Bu)(t)) ligands coordinate via nitrogen rather than sulfur, a most uncommon coordination mode for this class of ligands. Although [kappa2-(mim(R))2]MCl2 (M = Fe, Co, Ni, Zn) are not subject to homolytic cleavage of the S-S bond because the tetravalent state is not readily accessible, the observation that [kappa2-(mimPh)2]CoCl2 and [kappa2-(mim(Bu)(t))2]CoCl2 form an equilibrium mixture with the asymmetric disulfide [kappa2-(mim(Ph))(mim(Bu)(t))]CoCl2 indicates that S-S bond cleavage via another mechanism is possible. Likewise, metathesis between disulfide and diselenide ligands is observed in the formation of [kappa2-(mim(Bu)(t))(seim(Mes))]CoCl2 upon treatment of [kappa2-(mim(Bu)(t))2]CoCl2 with [kappa2-(seim(Mes))2]CoCl2.     

Amido analogues of zincocenes and cadmocenes

The synthesis and characterisation of low-coordinate zinc and cadmium complexes of the sterically demanding 1,3,6,8-tetra-tert-butylcarbazol-9-yl ligand ((t)Bu(4)carb(-)) are reported. ((t)Bu(4)carb)(2)M (M = Zn 1; M = Cd 2) are the first examples of formally two-coordinate bis-carbazol-9-yl complexes of the Group 12 metals and 2 is the first crystallographically characterised two-coordinate amido complex of cadmium. The structure and bonding within these complexes are explored via a combination of X-ray crystallography and DFT calculations. The solid state structures for these zinc and cadmium complexes differ greatly from each other; not only do the steric demands of the peripheral tert-butyl substituents in these systems act to inhibit solvent coordination, but they also influence the coordination geometry around the metal centres.     

Studies toward the synthesis of alpha-fluorinated phosphonates via tin-mediated cleavage of alpha-fluoro-alpha-(pyrimidin-2-ylsulfonyl)alkylphosphonates. Intramolecular cyclization of the alpha-phosphonyl radicals

Treatment of the alpha carbanions generated from several alpha-(pyrimidin-2-ylsulfonyl)alkylphosphonates with Selectfluor gave high yields of the alpha-fluoro-alpha-(pyrimidin-2-ylsulfonyl)alkylphoshonates, which were desulfonylated [Bu(3)SnH/2,2'-azobisisobutyronitrile (AIBN)/benzene or toluene/Delta] to give alpha-fluoroalkylphosphonates. "Catalytic" tin hydride, generated from tributyltin chloride and excess polymethylhydrosiloxane in the presence of potassium fluoride, also effected removal of the pi-deficient alpha-(pyrimidin-2-ylsulfonyl) group from the phosphonate esters. Substitution of Bu(3)SnD for Bu(3)SnH gave access to alpha-deuterium-labeled phosphonates. Prolonged treatment of alpha-(pyridin-2-ylsulfonyl)alkylphosphonate with excess Bu(3)SnH/AIBN or catalytic tin hydride also effected desulfonylation but in moderate yields. This represents a mild new methodology for removal of the synthetically useful pi-deficient heterocyclic sulfone moiety and an alternative route for the preparation of alpha-fluorinated phosphonates. Desulfonylation is suggested to proceed via attack of tin radical at an oxygen (or sulfur) atom of the sulfonyl group to give a stabilized alpha-phosphonyl radical intermediate. The latter was found to undergo 5-exo-trig ring closure to give the corresponding 2-methylcyclopentylphosphonates. Treatment of diethyl 1-bromohex-6-enylphosphonate with Bu(3)SnH/AIBN produced an analogous mixture of ring-closure products. Treatment of [(2-bromo-5- methoxyphenyl)(fluoro)(pyrimidin-2-ylsulfonyl)]methylphosphonate with Bu(3)SnH resulted in an intramolecular radical [1,5]-ipso substitution reaction and migration of the pyrimidinyl ring to give fluoro[5-methoxy-2-(pyrimidin-2-yl)phenyl]methylphosphonate.     

New bis-, tris- and tetrakis(pyrazolyl)borate ligands with 3-pyridyl and 4-pyridyl substituents: synthesis and coordination chemistry

The new ligands dihydrobis[3-(4-pyridyl)pyrazol-1-yl]borate [Bp(4py)]-, hydrotris[3-(4-pyridyl)pyrazol-1-yl]borate [Tp(4py)]-, tetrakis[3-(4-pyridyl)pyrazol-1-yl]borate [Tkp(4py)]-, dihydrobis[3-(3-pyridyl)pyrazol-1-yl]borate [Bp(3py)]-, hydrotris[3-(3-pyridyl)pyrazol-1-yl]borate [Tp(3py)]- and tetrakis[3-(3-pyridyl)pyrazol-1-yl]borate [Tkp(4py)]- are derivatives of the well known bis-, tris- and tetrakis-(pyrazolyl)borate cores, bearing 4-pyridyl or 3-pyridyl substituents attached to the pyrazolyl C3 positions. These pyridyl groups cannot chelate to the metal ions in the poly(pyrazolyl) cavity but are externally directed. Structural studies on a range of metal complexes show how, in many cases, coordination of these pendant pyridyl groups to the M(pyrazolyl)n core of an adjacent metal complex fragment results in formation of coordination oligomers or polymeric networks. [Tl(Bp(3py))], [Tl(Bp(4py))] and [Tl(Tp(4py))] form one-dimensional polymeric chains via coordination of one of their pendant pyridyl units to the Tl(I) centre of an adjacent complex fragment; in contrast, in [Tl(Tp(3py))] coordination of all three pendant pyridyl units to separate Tl(I) neighbours results in formation of a two-dimensional polymeric sheet. In [Tl(Tkp(3py))] and [Tl(Tkp(4py))] the Tl(I) is coordinated by two or three of the four pyrazolyl arms, respectively; bridging interactions of pendant 4-pyridyl groups with adjacent Tl(I) centres result in a two-dimensional sheet forming in each case. In Ag(Tkp(4py)) each Ag(I) ion is coordinated by two pyrazolyl rings, and two bridging pyridyl ligands from other complex units, resulting in a one-dimensional chain consisting of pairs of cross-linked zigzag chains. In contrast to these polymeric coordination networks, the structures of [Cu(Tp(4py))] and [(Tp(3py))Cd(CH3CO2)] are dimers, with a pendant pyridyl residue from the first metal centre attaching to a vacant coordination site on the second, and vice versa; these dimers are stabilised by pi-stacking interactions between sections of the two ligands. [Ni(Tp(3py))2] is monomeric, with an octahedral coordination geometry arising from two tris(pyrazolyl)borate chelates; the array of pendant 3-pyridyl groups is involved only in intramolecular hydrogen-bonding. [(Tp(4py))Re(CO)3] is also monomeric, with a facial arrangement of three pyrazolyl ligands and three carbonyls, with the pendant 4-pyridyl groups not further coordinated. [(Tp(2py))Re(CO)3], based on the related ligand hydrotris[3-(2-pyridyl)pyrazol-1-yl]borate, has a similar fac-(CO)3(pyrazolyl)3 coordination geometry.     

Protonation and reactivity towards carbon dioxide of the mononuclear tetrahedral zinc and cobalt hydroxide complexes, [Tp(Bu)t(,Me)]ZnOH and [Tp(Bu)t(,Me)]CoOH: comparison of the reactivity of the metal hydroxide function in synthetic analogues of carbonic anhydrase

The tris(3-tert-butyl-5-methylpyrazolyl)hydroborato zinc hydroxide complex [Tp(Bu)t(,Me)]ZnOH is protonated by (C(6)F(5))(3)B(OH(2)) to yield the aqua derivative [[Tp(Bu)t(,Me)]Zn(OH(2))][HOB(C(6)F(5))(3)], which has been structurally characterized by X-ray diffraction, thereby demonstrating that protonation results in a lengthening of the Zn-O bond by ca. 0.1 A. The protonation is reversible, and treatment of [[Tp(Bu)t(,Me)]Zn(OH(2))](+) with Et(3)N regenerates [Tp(Bu)t(,Me)]ZnOH. Consistent with the notion that the catalytic hydration of CO(2) by carbonic anhydrase requires deprotonation of the coordinated water molecule, [[Tp(Bu)t(,Me)]Zn(OH(2))](+) is inert towards CO(2), whereas [Tp(Bu)t(,Me)]ZnOH is in rapid equilibrium with the bicarbonate complex [Tp(Bu)t(,Me)]ZnOC(O)OH under comparable conditions. The cobalt hydroxide complex [Tp(Bu)t(,Me)]CoOH is likewise protonated by (C(6)F(5))(3)B(OH(2)) to yield the aqua derivative [[Tp(Bu)t(,Me)]Co(OH(2))][HOB(C(6)F(5))(3)], which is isostructural with the zinc complex. The aqua complexes [[Tp(Bu)t(,Me)]M(OH(2))][HOB(C(6)F(5))(3)] (M = Zn, Co) exhibit a hydrogen bonding interaction between the metal aqua and boron hydroxide moieties. This hydrogen bonding interaction may be viewed as analogous to that between the aqua ligand and Thr-199 at the active site of carbonic anhydrase. In addition to the structural similarities between the zinc and cobalt complexes, [Tp(Bu)t(,Me)ZnOH] and [Tp(Bu)()t(,Me)]CoOH, and between [[Tp(Bu)t(,Me)]Zn(OH(2))](+) and [[Tp(Bu)t(,Me)]Co(OH(2))](+), DFT (B3LYP) calculations demonstrate that the pK(a) value of [[Tp]Zn(OH(2))](+) is similar to that of [[Tp]Co(OH(2))](+). These similarities are in accord with the observation that Co(II) is a successful substitute for Zn(II) in carbonic anhydrase. The cobalt hydroxide [Tp(Bu)()t(,Me)]CoOH reacts with CO(2) to give the bridging carbonate complex [[Tp(Bu)t(,Me)]Co](2)(mu-eta(1),eta(2)-CO(3)). The coordination mode of the carbonate ligand in this complex, which is bidentate to one cobalt center and unidentate to the other, is in contrast to that in the zinc counterpart [[Tp(Bu)t(,Me)]Zn](2)(mu-eta(1),eta(1)-CO(3)), which bridges in a unidentate manner to both zinc centers. This difference in coordination modes concurs with the suggestion that a possible reason for the lower activity of Co(II)-carbonic anhydrase is associated with enhanced bidentate coordination of bicarbonate inhibiting its displacement.     

Iron(II) complexes with bio-inspired N,N,O ligands as oxidation catalysts: olefin epoxidation and cis-dihydroxylation

The Rieske dioxygenases are a group of non-heme iron enzymes, which catalyze the stereospecific cis-dihydroxylation of its substrates. Herein, we report the iron(II) coordination chemistry of the ligands 3,3-bis(1-methylimidazol-2-yl)propionate (L1) and its neutral propyl ester analogue propyl 3,3-bis(1-methylimidazol-2-yl)propionate (PrL1). The molecular structures of two iron(II) complexes with PrL1 were determined and two different coordination modes of the ligand were observed. In [Fe(II)(PrL1)(2)](BPh(4))(2) (3) the ligand is facially coordinated to the metal with an N,N,O donor set, whereas in [Fe(II)(PrL1)(2)(MeOH)(2)](OTf)(2) (4) a bidentate N,N binding mode is found. In 4, the solvent molecules are in a cis arrangement with respect to each other. Complex 4 is a close structural mimic of the crystallographically characterized non-heme iron(II) enzyme apocarotenoid-15-15'-oxygenase (APO). The mechanistic features of APO are thought to be similar to those of the Rieske oxygenases, the original inspiration for this work. The non-heme iron complexes [Fe(II)(PrL1)(2)](OTf)(2) (2) and [Fe(II)(PrL1)(2)](BPh(4))(2) (3) were tested in olefin oxidation reactions with H(2)O(2) as the terminal oxidant. Whereas 2 was an active catalyst and both epoxide and cis-dihydroxylation products were observed, 3 showed negligible activity under the same conditions, illustrating the importance of the anion in the reaction.     

Zeolite-catalyzed synthesis of nicotinyl-fused indolo-pyrazoles and evaluation of their activities against Anopheles arabiensis and Lipoxygenase

A series of nicotyl-fused indolo-pyrazoles (NFIPs) were synthesized by a one-pot multicomponent reaction of aryl aldehydes, isoniazid, and indole in the presence of zeolite as a catalyst. Structures of all the synthesized compounds were established by IR, ¹H-NMR, ¹³C-NMR, 2D-NMR, TOF-MS, and elemental analysis. The products were obtained in excellent yields and high purity. All 10 compounds were screened for larvicidal and insecticidal properties against Anopheles arabiensis and tested for their lipoxygenase inhibitory activity. Compounds (3-(3-hydroxy-4-methoxyphenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4i ) and (3-(3-bromo-5-hydroxy-4-methoxyphenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4j) displayed highest larvae mortality at a 4 μg/ml dose in 24 h. Compounds (3-(4-methoxyphenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4h ) and (3-(3-hydroxy-4-methoxyphenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4i ) showed a significant knockdown activity after 24 h with 70% mortality. Furthermore, (3-(4-chlorophenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4c ) and (3-(3-bromo-5-hydroxy-4-methoxyphenyl)-2,3-dihydropyrazolo[4,3-b]indol-1(4H)-yl)(pyridin-4-yl)methanone ( 4j ) displayed promising lipoxygenase inhibitory activity with a mortality of 70% and 60%, respectively.     

Comparison of Phosphorescent Pt(II) Complexes with C^N^N vs N^N^N Chelators and Caffeine-Based NHC-co-ligands†

In this work, we explored coordination compounds featuring caffeine-based carbene co-ligands and tridentate dianionic pincer luminophores derived from 2,6-bis(1H-1,2,4-triazol-5-yl)pyridine (N), as well as from 2-phenyl-6-(1H-1,2,4-triazol-5-yl)pyridine (C), bearing either Ad (adamantyl) or tBu (tertiary butyl) substituents. The new 2-phenyl-6-(1H-1,2,4-triazol-5-yl)pyridine-based ligand precursors along with four Pt(II) complexes, namely Pt(C-tBu), Pt(C-Ad), Pt(N-tBu) and Pt(N-Ad) were characterized. Further on, the influence of the different substituents at the chelating luminophores and of the caffeine-based NHC-co-ligand on the photophysical properties (including photoluminescence quantum yields (Φ_L), excited-state lifetimes (τ), radiative (k_r), and non-radiative (k_nr) deactivation rate constants) was assessed in fluid solutions at room temperature (RT) and in frozen glassy matrices at 77 K. All four luminophores perform equivalently well within the experimental uncertainty. In deoxygenated fluid solutions at RT, photoluminescence quantum yields reaching up to 24 ± 2% and excited-state lifetimes of around 12 μs were found. The generally long excited-state lifetimes and only minor blue shift upon cooling to 77 K along with mostly well-resolved vibrational progressions point to metal-perturbed ligand-centered excited states. Notably, the yield of the complexation reaction in case of Pt(C-tBu) and Pt(C-Ad) was almost two times higher compared to Pt(N-tBu) and Pt(N-Ad). Cyclometallation is not an essential feature to achieve high photoluminescence quantum yields, but it can improve the synthetic efficiency. In summary, it can be observed that coordination chemical concepts based on natural products can lead to stable phosphorescent species with interesting excited-state properties.     

Monovalent indium in a sulfur-rich coordination environment: synthesis, structure and reactivity of tris(2-mercapto-1-tert-butylimidazolyl)hydroborato indium, [TmBut]In

[Tm(Bu(t))]In, the first structurally-characterized monovalent indium compound that features a sulfur-rich coordination environment, has been synthesized via treatment of InCl with [Tm(Bu(t))]K; in contrast to the thallium counterpart, the lone pair of [Tm(Bu(t))]In is a site of reactivity, thereby allowing formation of [Tm(Bu(t))]In-->B(C(6)F(5))(3) and [Tm(Bu(t))]In(kappa(2)-S(4)) upon treatment with B(C(6)F(5))(3) and S(8), respectively.     

Anion-induced urea deprotonation

The urea-based receptor 1 (1-(7-nitrobenzo[1,2,5]oxadiazol-4-yl)-3-(4-nitrophenyl)urea, L--H), interacts with X- ions in MeCN, according to two consecutive steps: 1) formation of a hydrogen-bond complex [L--H...X]-; 2) deprotonation of L--H to give L- and [HX2]-, as shown by spectrophotometric and 1H NMR titration experiments. Step 2) takes place with more basic anions (fluoride, carboxylates, dihydrogenphosphate), while less basic anions (Cl-, NO2-, NO3-) do not induce proton transfer. On crystallisation from a solution containing L--H and excess Bu4NF, the tetrabutylammonium salt of the deprotonated urea derivative (Bu4N[L]) was isolated and its crystal and molecular structure determined.     

Synthesis and structural characterization of one- and two-dimensional coordination polymers based on platinum-silver metallic backbones

Seven Pt-Ag coordination polymers [Pt(NH3)2(NHCO(t)Bu)2Ag(H2O)](ClO4) (1), [Pt2(dap)2(NHCO(t)Bu)4Ag2(NO3)(ClO4)] (dap = 1,2-diaminopropane, 2), [Pt2(en)2(NHCO(t)Bu)4Ag2(m-C6H4(CO2)2)].3H2O (en = ethylenediamine, 3), [Pt2(NH3)2(NHCO(t)Bu)2Ag2(p-C6H4(CO2)2)].2H2O (4), [Pt3(en)3(NHCO(t)Bu)6Ag2(p-C6H4(CO2)2)(1.5)].6H2O (5), [Pt(NH3)2(NHCO(t)Bu)4Ag(4-C5H4NCO2)2].10H2O (6), and [Pt2(en)2(NHCO(t)Bu)4Ag2(4-C5H4NCO2)](ClO4) (7) were synthesized from the corresponding [Pt(RNH2)2(NHCO(t)Bu)2] and Ag salts, respectively, and their structures were determined by X-ray crystallography. The Pt and Ag units aggregate into one-dimensional chains based on Pt-Ag backbones. Compounds 1, 2, and 6 possess an extended zigzag Pt-Ag chain motif, and the metallic chains arrange in a parallel fashion into layered structures. Compounds 3-5, and 7 form 2-D brick wall sheets due to the coordination of the bifunctional anions to the Ag+ ions of the neighboring chains. These polymers are constructed based on the Pt-Ag interactions and the coordination of amidate oxygen atoms to Ag ions. There are three kinds of short Pt-Ag bonds observed in the structures of these compounds. The Pt-Ag metallic backbone is formed by the stacking unsupported Pt-Ag bonds, the amidate doubly bridged Pt-Ag bonds, and the amidate singly bridged Pt-Ag bonds. In the chains, the Pt-Ag bond distances are quite short, and appear in the range of 2.78-2.97 A, which are comparable to known Pt-Ag dative bonds.     

Diphosphanes derived from phobane and phosphatrioxa-adamantane: similarities, differences and anomalies

The homodiphosphanes CgP-PCg (1) and PhobP-PPhob (2) and the heterodiphosphanes CgP-PPhob (3), CgP-PPh(2) (4a), CgP-P(o-Tol)(2) (4b), CgP-PCy(2) (4c), CgP-P(t)Bu(2) (4d), PhobP-PPh(2) (5a), PhobP-P(o-Tol)(2) (5b), PhobP-PCy(2) (5c), PhobP-P(t)Bu(2) (5d) where CgP = 6-phospha-2,4,8-trioxa-1,3,5,7-tetramethyladamant-9-yl and PhobP = 9-phosphabicyclo[3.3.1]nonan-9-yl have been prepared from CgP(BH(3))Li or PhobP(BH(3))Li and the appropriate halophosphine. The formation of 1 is remarkably diastereoselective, with the major isomer (97% of the product) assigned to rac-1. Restricted rotation about the P-P bond of the bulky meso-1 is detected by variable temperature (31)P NMR spectroscopy. Diphosphane 3 reacts with BH(3) to give a mixture of CgP(BH(3))-PPhob and CgP-PPhob(BH(3)) which was unexpected in view of the predicted much greater electron-richness of the PhobP site. Each of the diphosphanes was treated with dimethylacetylene dicarboxylate (DMAD) in order to determine their propensity for diphosphination. The homodiphosphanes 1 and 2 did not react with DMAD. The CgP-containing heterodiphosphanes 4a-d all added to DMAD to generate the corresponding cis alkenes CgPCH(CO(2)Me)=CH(CO(2)Me)PR(2) (6a-d) which have been used in situ to form chelate complexes of the type [MCl(2)(diphos)] (7a-d) where M = Pd or Pt. The PhobP-containing heterodiphosphanes 3 and 5a-d react anomalously with DMAD and do not give the products of diphosphination. The X-ray crystal structures of the diphosphanes 2, 3, 4a, and 5a, the monoxide and dioxide of diphosphane 1, and the platinum chelate complex 7c have been determined and their structures are discussed.     

Differing reactivities of p[triple band]CMe and P[triple band]CBu(t) towards a triphosphabenzene and a tetraphosphabarrelene: synthesis of new phosphaalkyne pentamers (P5C5Me(n)Bu(t)(5-n) n = 0, 1 or 2)

The reaction of excess P[triple band]CMe with the triphosphabenzene, 1,3,5-P3C3Bu(t)3, yields a phosphaalkyne pentamer, P5C5Me2Bu(t)3, which displays a pentaphosphaisolumibullvalene core structure. Its treatment with [W(CO)5(THF)] gives a complex of this cage, [{W(CO)5}2(mu-eta1:eta1-P5C5Me2Bu(t)3)], which has been structurally characterised. In contrast, the previously reported reaction of P[triple band]CBu(t) with 1,3,5-P3C3Bu(t)3, affords, in addition to the known tetraphosphabarrelene, 1,3,5,7-P4C4Bu(t)4, a new phosphaalkyne pentamer (P55C5Bu(t)5), which has a partially unsaturated "open cage" core. Although P[triple band]CBu(t) does not react with 1,3,5,7-P4C4Bu(t)4, the reaction of P[triple band]CMe with the tetraphosphabarrelene is shown to give a mixture of products. Treatment of these with [W(CO)5(THF)] leads to the isolation of the tungsten carbonyl complex, [{W(CO)} {W(CO)4}(mu-eta1:eta4-P5C5MeBu(t)4)], which has been structurally characterised. This study suggests that P[triple band]CMe has a significantly greater reactivity towards cycloadditions than its bulkier counterpart, P[triple band]CBu(t).     

One-dimensional silver(I) coordination polymers containing cyclodiphosphazane, cis-{(o-MeOC(6)H(4)O)P(mu-N(t)Bu)}(2)

The 1:1 reaction between the cyclodiphosphazane cis-{(o-MeOC(6)H(4)O)P(mu-N(t)Bu)}(2) (1) and AgOTf afforded one-dimensional Ag(I) coordination polymer [Ag{mu-OTf-kappaO,kappaO}{mu-(o-MeOC(6)H(4)O)P(mu-N(t)Bu)-kappaP,kappaP}(2)](infinity) (2) containing bridging cyclodiphosphazane and trifluoromethanesulfonate (OTf) ligands. The 2:1 reaction of and AgOTf leads to the formation of simple mononuclear complex [Ag{OTf-kappaO,kappaO}({(o-MeOC(6)H(4)O)P(mu-N(t)Bu)-kappaP}(2))(2)] (3) in quantitative yield. Reaction of 1 with AgCN produces a strain-free zig-zag coordination polymer [({(o-MeOC(6)H(4)O)P(mu-N(t)Bu)-kappaP,kappaP}(2))(2)Ag(NCAgCN)](infinity) (4) irrespective of reaction stoichiometry and conditions. In complexes 3 and 4 cyclodiphosphazanes coordinate to Ag(I) centers in a monodentate fashion. Single crystal structures were established for the Ag(I) polymers 2 and 4.     

Spin transition in the molecular heterospin complex of Cu(hfac)2 with 4,4,5,5-tetramethyl-2-(1-methylpyrazol-5-yl)-4,5-dihydroimidazole-1-oxyl 3-oxide

The synthesis, structure, and magnetic properties of the products of the reaction for Cu(hfac)₂ (hfac is hexafluoroacetylacetonate) with spin-labeled nitronyl nitroxides 4,4,5,5-tetramethyl-2-(1-R-1H-pyrazol-5-yl)-3-imidazoline-1-oxyl 3-oxides L^5/R (R = Me, Et, Pr, Bu), viz., binuclear complex [Cu(hfac)₂L^5/Me]₂ and chain polymer complexes [Cu(hfac)₂L^5/R]_n, are described. The polymer heterospin chains are built according to “head-to-head” (R = Me, Et, Pr, Bu) and “head-to-tail” (R = Pr, Bu) motifs. Compound [Cu(hfac)₂L^5/Me]₂ is characterized by the ability to reveal the reversible effect of thermally induced spin transition at a temperature about 75 K (without hysteresis). In the set of heterospin Cu^II compounds with spin-labeled pyrazoles, this is the earlier unknown example of a molecular complex exhibiting a similar magnetic anomaly.     

Ultrasound- and microwave-assisted synthesis of (E)-1-aryl-3-[2-(piperidin-1-yl)quinolin-3-yl]prop-2-en-1-ones and (E)-1-aryl-3-[2-(pyrrolidin-1-yl)quinolin-3-yl]prop-2-en-1-ones,and their antimicrobial activity

Series of new (E)-1-aryl-3-[2-(piperidin-1-yl)quinolin-3-yl]prop-2-en-1-ones and (E)-1-aryl-3-[2-(pyrrolidin-1-yl)quinolin-3-yl]prop-2-en-1-ones have been efficiently prepared via the Claisen-Schmidt condensation of 2-(piperidin-1-yl)quinoline-3-carbaldehyde and 2-(pyrrolidin-1-yl)quinoline-3-carbaldehyde, respectively, with aryl methyl ketones under conditions of ultrasound and microwave irradiation. Structures of the products have been confirmed by IR, ¹H NMR, ¹³C NMR, and mass spectroscopy, as well as by elemental analysis. Evaluation of the in vitro antibacterial activity against bacterial (Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli) and fungal (Aspergillus niger and Candida metapsilosis) strains has revealed good antimicrobial activity of some of the tested compounds.     

Extraction and coordination studies of the unexplored bifunctional ligand carbamoyl methyl sulfoxide (CMSO) with uranium(VI) and cerium(III) nitrates. Synthesis and structures of [UO2(NO3)2(PhSOCH2CON(i)Bu2)] and [Ce(NO3)3(PhSOCH2CONBu2)2

The bifunctional carbamoyl methyl sulfoxide ligands, PhCH(2)SOCH(2)CONHPh (L1), PhCH(2)SOCH(2)CONHCH(2)Ph (L2), PhSOCH(2)CON(i)Pr(2)(L3), PhSOCH(2)CONBu(2)(L4), PhSOCH(2)CON(i)Bu(2)(L5) and PhSOCH(2)CON(C(8)H(17))(2)(L6) have been synthesized and characterized by spectroscopic methods. The selected coordination chemistry of L1, L3, and L5with [UO(2)(NO(3))(2)] and [Ce(NO(3))(3)] has been evaluated. The structures of the compounds [UO(2)(NO(3))(2)(PhSOCH(2)CON(i)Bu(2))](10) and [Ce(NO(3))(3)(PhSOCH(2)CONBu(2))(2)](12) have been determined by single crystal X-ray diffraction methods. Preliminary extraction studies of ligand L6 with U(VI), Pu(IV) and Am(III) in tracer level showed an appreciable extraction for U(VI) and Pu(IV) in up to 10 M HNO(3) but not for Am(III). Thermal studies on compounds 8 and 10 in air revealed that the ligands can be destroyed completely on incineration. The electron spray mass spectra of compounds 8 and 10 in acetone show that extensive ligand distribution reactions occur in solution to give a mixture of products with ligand to metal ratios of 1: 1 and 2 :1. However, 10 retains its solid state structure in CH(2)Cl(2).     

Transition metal-free synthesis of quinolino[2′,3′:3,4]pyrazolo[5,1-<Emphasis Type="Italic">b</Emphasis>]quinazolin-8(6<Emphasis Type="Italic">H</Emphasis>)-ones via cascade dehydrogenation and intramolecular <Emphasis Type="Italic">N</Emphasis>-arylation

2-(2-Chloroquinolin-3-yl)-3-(arylamino)-2,3-dihydroquinazolin-4(1H)-one was converted to quinolino[2′,3′:3,4]pyrazolo[5,1-b]quinazolin-8(6H)-ones in the presence of KOtBu in DMSO at room temperature. The present method has the advantages of easy conditions, construction of highly novel five heterocycles, transition metal-free conditions, cascade dehydrogenation and intramolecular N-arylation and good to high yield of products.