Polymeric liquid membrane electrodes incorporated with macrocyclic hexaamines for screening adenine nucleotides

Lipophilic macrocyclic hexaamines supported by a poly(vinyl chloride) PVC matrix were used for the construction of liquid membrane electrodes sensitive toward adenine nucleotide polyanions. The membrane potential strongly depended on the pH of the sample solution. This phenomenon occurs due to the ability of the ionophore to accept protons. Therefore, the optimum pH was determined based on potential pH profile. The potential measurements were carried out at pH 6.0 in the presence of 10(-2) M 2-[N-morpholino] ethanesulfonic acid (MES) buffer. The potential response of these electrodes toward ATP(-4) and/or HATP(-3) was close to the Nernstian slope. The selectivities against ADP(-3), AMP(-2), HPO(4)(-2), and monovalent inorganic anions were estimated using the matched potential method. Chloride ions slightly affected potential response of the electrodes toward ATP(-4)/HATP(-3). The influence of ionophore chemical structure on the selectivity and the sensitivity of these electrodes is briefly discussed.     

Tuning the coordination sphere around highly luminescent lanthanide complexes

A series of three ligands designed for the formation of water-soluble luminescent lanthanide complexes is described. All ligands are based on a 6'-carboxy-2,2':6',2'-terpyridine framework linked via a methylene bridge to n-butylamine. The second negatively charged arm consists of a 6-carboxy-2-methylenepyridine for L1, a 6'-carboxy-6-methylene-2,2'-bipyridine for L2, and a 6'-carboxy-6-methylene-2,2':6',2'-terpyridine for L3. The photophysical properties of the Eu and Tb complexes were studied in aqueous solutions by means of absorption spectroscopy and steady-state and time-resolved luminescence spectroscopy. Luminescence excited-state lifetimes were recorded and led to the determination of two water molecules in the first coordination sphere. The europium complexes were characterized by means of (1)H NMR spectroscopy in D 2O and DFT calculations performed at the B3LYP level both in vacuo and in aqueous solution. Finally, the influence of different phosphorylated anions such as HPO 4 (2-), ATP (4-), ADP (3-), and AMP (2-) on the luminescence properties of the [Eu L X (H 2O) 2] (+) complexes ( X = 1-3) was investigated in buffered aqueous solutions (0.01 M TRIS, pH 7.0), showing a significant interaction of ATP (4-) with [Eu( L2)(H 2O) 2] (+). The coordination of anions was understood in terms of partial decomplexation of one arm of the ligands and water displacement, with formation of ternary species, and it was rationalized on the basis of the structural models of the complexes obtained from DFT calculations.     

Selective inclusion of PO4(3-) within persistent dimeric capsules of a tris(thiourea) receptor and evidence of cation/solvent sealed unimolecular capsules

A tren-based tris(thiourea) receptor, L with electron-withdrawing p-nitrophenyl terminals has been established as a competent hydrogen-bonding scaffold that can selectively encapsulate PO(4)(3-) within persistent and rigid dimeric capsules, assembled by aromatic π-stacking interactions between the receptor side-arms. A quaternary ammonium salt of PO(4)(3-) capsules (complexes 1 and 1b, 2:1 host-guest) can reproducibly be obtained in quantitative yields by a solution-state deprotonation of [HL](+) moieties and a bound HPO(4)(2-) anion of complex 1a (HPO(4)(2-) complex of protonated L, 2:1 host-guest), induced by the presence of a large excess of anions such as HCO(3)(-), CH(3)CO(2)(-), and F(-). Qualitative as well as quantitative (1)H and (31)P NMR experiments (DMSO-d(6)) have been carried out in detail to demonstrate the selective and preferential inclusion of PO(4)(3-) by L in solution-states. Competitive crystallization experiments performed in the presence of an excess of anions such as HCO(3)(-), HSO(4)(-), CH(3)CO(2)(-), NO(3)(-) and halides (F(-) and Cl(-)) further establish the phenomenon of selective PO(4)(3-) encapsulation as confirmed by (1)H NMR, (31)P NMR, FT-IR and powder X-ray diffraction patterns of the isolated crystals. X-ray structural analyses and (31)P NMR studies of the isolated crystals of phosphate complexes (1, 1a and 1b) provide evidence of the binding discrepancy of inorganic phosphates with protonated and neutral form of L. Furthermore, extensive studies have been carried out with other anions of different sizes and dimensions in solid- and solution-states (complexes 2a, 3, 4 and 5). Crystal structure elucidation revealed the formation of a solvent (DMSO) sealed unimolecular capsule in the F(-) encapsulated complex, 2a (1:1 host-guest), a CO(3)(2-) encapsulated centrosymmetric molecular capsule in 3 (2:1 host-guest) and a cation (tetrabutylammonium) sealed SO(4)(2-) encapsulated unimolecular capsule in 4 (1:1 host-guest). 2D-NOESY NMR experiments carried out on these capsule complexes further confirm the relevant binding stoichiometry of complexes (2a-4) except for the PO(4)(3-)-encapsulated complex (1b) which showed a 1:1 host-guest stoichiometry in solution.     

Electrospray ionization tandem mass spectrometric study of salt cluster ions: part 2--salts of polyatomic acid groups and of multivalent metals

Salt cluster ions formed from 0.05 M solutions of CaCl(2), CuCl(2) and Na(A)B (where A = 1 or 2 and B = CO(3)(2-), HCO(3)(-), H(2)PO(4)(-) and HPO(4)(2-)) were studied by electrospray ionization tandem mass spectrometry. The effects on salt cluster ions of droplet pH and of redox reactions induced by electrospray provide information on the electrospray process. CaCl(2) solution yielded salt cluster ions of the form (CaCl(2))(n)(CaCl)(x)(x+) and (CaCl(2))(n)(Cl)(y)(y-), where x, y = 1-3, in positive- and negative-ion modes, respectively. Upon collision induced dissociation (CID), singly charged CaCl(2) cluster ions fragmented, doubly charged cluster ions generated either singly or both singly and doubly charged fragment ions, depending on the cluster mass, and triply charged clusters fragmented predominantly by the loss of charged species. CuCl(2) solution yielded nine series of cluster ions of the form (CuCl(2))(n)(CuCl)(m) plus Cu(+), CuCl(+), or Cl(-). CuCl, the reductive product of CuCl(2), was observed as a neutral component of positively and negatively charged cluster ions. Free electrons were formed in a visible discharge that bridged the gap between the electrospray capillary and the sampling cone brought about the reduction of Cu(2+) to Cu(+). Upon CID, these cluster ions fragmented to lose CuCl(2), CuCl, Cl, and Cl(2). Na(2)CO(3) and NaHCO(3) solutions yielded cluster ions of the form (Na(2)CO(3))(n) plus Na(+) or NaCO(3)(-). Small numbers of NaHCO(3) molecules were found in some cluster ions obtained with the NaHCO(3) solution. For both Na(2)HPO(4) and NaH(2)PO(4) solutions, ions of the form (Na(2)HPO(4))(h), (NaH(2)PO(4))(i), (Na(3)PO(4))(j), (NaPO(3))(k) plus Na(+), PO(3)(-) or H(2)PO(4)(-) were observed. In addition, ions having one or two phosphoric acid (H(3)PO(4)) molecules were observed from the NaH(2)PO(4) solution while ions containing one sodium hydroxide (NaOH) molecule were observed from the Na(2)HPO(4) solution. The cluster ions observed from these four salts of polyatomic acid groups indicate that changes in pH occur in both directions during the electrospray process principally by solvent evaporation; the pH value of the acidic solution became lower and that of the basic solution higher.     

Effect of Nitrogen Methylation on Cation and Anion Coordination by Hexa- and Heptaazamacrocycles. Catalytic Properties of These Ligands in ATP Dephosphorylation

The stability constants of the complexes formed by 1,10-dimethyl-1,4,7,10,13,16-hexaazacyclooctadecane (L) and 1,4,7-trimethyl-1,4,7,10,13,16,19-heptaazacyclohenicosane (L1) with Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Pb(2+), as well as that for the formation of PbL2(2+) (L2 = 1,4,7,13-tetramethyl-1,4,7,10,13,16-hexaazacyclooctadecane), were determined by means of potentiometric (pH-metric) titrations in 0.15 mol dm(-)(3) NaClO(4) at 298.1 +/- 0.1 K. The enthalpy changes for the formation of Cu(2+) complexes with L and L1 were measured by means of microcalorimetry. These thermodynamic data were compared with those previously reported for L2, 1,4,7,10,13,16-hexaazacyclooctadecane (L3), and 1,4,7,10,13,16,19-heptaazacyclohenicosane (L4) evidencing that nitrogen methylation can produce lower or higher complex stability depending on the metal ion and the number of methylated nitrogens. The equilibria of complexation of ATP(4)(-), ADP(3)(-), AMP(2)(-), P(2)O(7)(4)(-), and [Co(CN)(6)](3)(-) by Land L1 were studied by means of pH-metric titrations in 0.15 mol dm(-)(3) NaClO(4) at 298.1 +/- 0.1 K. The catalytic reactions of ATP dephosphorylation induced by these ligands in solution were followed by (31)P NMR spectroscopy at different temperature and pH values. L is the most appropriate receptor, among L-L4, in the recognition of the nucleotide. The catalytic efficiency of hexa- and heptaazaligands increases in the order L < L3 < L2 and L1 < L4, respectively, L4 being the most efficient. Namely, di- and tetramethylation of L3 produces opposite effects on its catalytic properties.     

Selective recognition of monohydrogen phosphate by fluorescence enhancement of a new cerium complex

Bis(8-hydroxy quinoline-5-solphonate) cerium(III) chloride (Ce(QS)(2)Cl) (L) was synthesized and then used as a novel fluorescent sensor for anion recognition. Preliminarily study showed that fluorescence of L enhanced selectively in the presence of HPO(4)(2-) ion. This enhancement is attributed to a 1:1 complex formation between L and HPO(4)(2-) anion. The association constant of 1:1 complex of L-HPO(4)(2-) was calculated as 3.0×10(6). Thus, L was utilized as a basis for a selective detection of HPO(4)(2-) anion in solution. The linear response range of the proposed fluorescent chemo-sensor covers a concentration range of HPO(4)(2-) from 3.3×10(-7) to 5.0×10(-6) mol L(-1) with a detection limit of 2.5×10(-8) mol L(-1). L showed selective and sensitive fluorescence enhancement response toward HPO(4)(2-) ion in comparison with I(3)(-), NO(3)(-), CN(-), CO(3)(2-), Br(-), Cl(-), F(-), H(2)PO(4)(-) and SO(4)(2-) ions. It was probably attributed to the higher stability of the inorganic complex between HPO(4)(2-) ion and L. The method was successfully applied for analysis of phosphate ions in some fertilizers samples.     

Binding of inorganic oxoanions to macrocyclic ligands: effect of the degree of protonation on supramolecular assemblies formed by phosphate and [18]aneN(6)

Five macrocycle-oxoanion adducts have been isolated from aqueous solutions containing 1,4,7,10,13,16-hexaazacyclooctadecane ([18]aneN(6), L) and phosphoric acid whose pH had been adjusted to selected values in the 1-8 range. Four products, (H(6)L)(H(2)PO(4))(6).2H(3)PO(4) (1), (H(6)L)(H(2)PO(4))(6) (2), (H(4)L)(H(2)PO(4))(4).2H(2)O (4), and (H(4)L)(HPO(4))(2).7H(2)O (5) crystallized from aqueous solutions at pH 1, 3, 6, and 8, respectively, while (H(4)L)(H(2)PO(4))(4) (3) crystallized on diffusion of EtOH into an aqueous reaction mixture at pH 6. Single-crystal X-ray structure determinations enabled an examination of supramolecular interactions between protonated forms of [18]aneN(6), phosphoric acid and its conjugate bases, and water of solvation. The macrocycle adopts a variety of conformations in order to accommodate the supramolecular constructs formed by the oxoanions and solvent molecules as the relative proportions of interacting species are altered. At pH 1 and 3, the fully protonated macrocycle, [LH(6)](6+), is found with six H(2)PO(4)(-) anions. At pH 6 and 8, the tetraprotonated macrocycle, [LH(4)](4+), crystallizes with four H(2)PO(4)(-) and two HPO(4)(2)(-), respectively. Variations in the solute of crystallization are evident, with phosphoric acid being present at the lowest pH and water at pH 6 and 8. In 5, the seven unique water molecules form a string-of-pearls motif within which a new heptameric isomer, consisting of a water pentamer that uses a single water to interact with the other two unique water molecules, is found. Structures 1, 2, 4, and 5 exhibit eta-3 H-bonding of ammonium protons to a single oxygen of the guest phosphates located above and below the macrocyclic ring. In 3, two phosphate oxygens of the cavity anion interact with the macrocycle, one of which participates in eta-2 H-bonding with ammonium groups.     

Kinetics and mechanism of iron(III)-nitrilotriacetate complex reactions with phosphate and acetohydroxamic acid

The kinetics and mechanism of the substitution of coordinated water in nitrilotriacetate complexes of iron(III) (Fe(NTA)(OH(2))(2) and Fe(NTA)(OH(2))(OH)(-)) by phosphate (H(2)PO(4)(-) and HPO(4)(2)(-)) and acetohydroxamic acid (CH(3)C(O)N(OH)H) were investigated. The phosphate reactions were found to be pH dependent in the range of 4-8. Phosphate substitution rates are independent of the degree of phosphate protonation, and pH dependence is due to the difference in reactivity of Fe(NTA)(OH(2))(2) (k = 3.6 x 10(5) M(-)(1) s(-)(1)) and Fe(NTA)(OH(2))(OH)(-) (k = 2.4 x 10(4) M(-)(1) s(-)(1)). Substitution by acetohydroxamic acid is insensitive to pH in the range of 4-5.2, and Fe(NTA)(OH(2))(2) and Fe(NTA)(OH(2))(OH)(-) react at equivalent rates (k = 4.2 x 10(4) and 3.8 x 10(4) M(-)(1) s(-)(1), respectively). Evidence for acid-dependent and acid-independent back-reactions was obtained for both the phosphate and acetohydroxamate complexes. Reactivity patterns were analyzed in the context of NTA labilization of coordinated water, and outer-sphere electrostatic and H-bonding influences were analyzed in the precursor complex (K(os)).     

Stabilities and isomeric equilibria in aqueous solution of monomeric metal ion complexes of adenosine 5'-diphosphate (ADP3-) in comparison with those of adenosine 5'-monophosphate (AMP2-)

Under experimental conditions in which the self-association of the adenine phosphates (AP), that is, of adenosine 5'-monophosphate (AMP(2-)) and adenosine 5'-diphosphate (ADP(3-)), is negligible, potentiometric pH titrations were carried out to determine the stabilities of the M(H;AP) and M(AP) complexes where M(2+)=Mg(2+), Ca(2+), Sr(2+), Ba(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), or Cd(2+) (25 degrees C; I=0.1 M, NaNO(3)). It is concluded that in the M(H;AMP)(+) species M(2+) is bound at the adenine moiety and in the M(H;ADP) complexes at the diphosphate unit; however, the proton resides in both types of monoprotonated complexes at the phosphate residue. The stabilities of nearly all the M(AMP) and M(ADP)(-) complexes are significantly larger than what is expected for a sole coordination of M(2+) to the phosphate residue. This increased complex stability is attributed, in agreement with previous (1)H NMR shift studies and further information existing in the literature, to the formation of macrochelates of the phosphate-coordinated metal ions with N7 of the adenine residues. On the basis of recent measurements with simple phosphate monoesters and phosphonate ligands (R-MP(2-)) as well as with diphosphate monoesters (R-DP(3-)), where R is a noncoordinating and noninhibiting residue, the increased stabilities of the M(AMP) and M(ADP)(-) complexes due to the M(2+)-N7 interaction could be evaluated and the extent of macrochelate formation calculated. The results show that the formation degrees of the macrochelates for the complexes of the alkaline earth ions are small (about 15 % at the most), whereas for the 3d metal ions as well as for Zn(2+) and Cd(2+) the formation degrees vary between about 15 % (Mn(2+)) and 75 % (Ni(2+)) with values of about 40 and 50 % for Zn(2+) and Cu(2+), respectively. It is interesting to note, taking earlier results for M(ATP)(2-) complexes also into account (ATP(4-)=adenosine 5'-triphosphate), that for a given metal ion in nearly all instances the formation degrees of the macrochelates are within the error limits the same for M(AMP), M(ADP)(-) and M(ATP)(2-) complexes; except for Co(2+) and Ni(2+) it holds M(AMP) > M(ADP)(-) approximately M(ATP)(2-). This result is astonishing if one considers that the absolute stability constants of these complexes, which are determined largely by the affinity of the phosphate residues, can differ by more than two orders of magnitude. The impact and conclusions of these observations for biological systems are shortly lined out.     

Binding of polyanions by biogenic amines. I. Formation and stability of protonated putrescine and cadaverine complexes with inorganic anions

The formation and stability of proton diamine-inorganic anion [Cl(-), SO(4)(2-), HPO(4)(2-), P(2)O(7)(4-) and Fe(CN)(6)(4-)] complexes was studied potentiometrically [(H(+))-glass electrode] at 25 degrees C. Several general formula ALH(r) complexes are formed in these various systems. The stability of complexes formed between H(2)A(2+) and different anions ranges from one to six (log formation constants). The formation constants are slightly dependent on the length of the alkylic chain whilst they strongly depend on the anion charge. A general relationship [logK=-0.85+1.81z-0.055n] was found for the reaction H(2)A(2+)+L(z-)=ALH(2)((2-z)) [L=inorganic anions, A=NH(2)-(CH(2))(n)-NH(2) diamines with n=2...8].     

Speciation of metal-EDTA complexes by flow injection analysis with electrospray ionization mass spectrometry and ion chromatography with inductively coupled plasma mass spectrometry

Flow injection analysis (FIA) with ESI-MS and ion chromatography (IC) with inductively coupled plasma-MS (ICP-MS) as the complementary technique have been explored for the determination of metal ions as their metal-EDTA complexes. ESI-MS enabled the identification of metal-EDTA complexes such as [Mn(EDTA)](2-), [Co(EDTA)](2-), [Ni(EDTA)](2-), [Cu(EDTA)](2-), [Zn(EDTA)](2-), [Pb(EDTA)](2-), and [Fe(EDTA)](1-) and their MS spectral showed that these metal-EDTA complexes were present in solution. Based on the ESI-MS, ion chromatographic separation and ICP-MS detection of these complexes are possible because IC-ICP-MS requires stable metal-EDTA complex during the chromatographic separation. The separation of these metal-EDTA complexes was achieved on an anion-exchange column with a mobile phase containing 30 mM NH(4)(HPO(4))(2) at pH 7.5 within 7 min with ICP-MS providing element specific detection. The ICP-MS LODs for the metal-EDTA were in the range of 0.1-0.5 microg/L with the exception of Fe (15 microg/L). The proposed method was a simple procedure for sample processing, using direct injection of sample without removal of sample matrix and was successfully applied to the determination of metal-EDTA complexes in real samples.     

Molecular properties of adsorbates that affect the growth kinetics of archerite (KDP)

We explore the molecular properties of adsorbates that dramatically affect growth kinetics and morphology of the [100] face of archerite, also known as potassium dihydrogen phosphate (KH(2)PO(4) or KDP). Aqueous complexes of Al(III), Fe(III), and Cr(III) are known to affect KDP growth, albeit the actual step-pinning complex(es) is unknown. Using in situ atomic force microscopy (AFM), we measured changes in the growth rates of the [100] face of KDP with supersaturation in the presence of trace amounts of [Co(NH(3))(6)](3+), [Fe(CN)(6)](3-), eta(1)-[Co(NH(3))(5)HPO(4)](+), eta(2)-[Co(NH(3))(4)HPO(4)](+), eta(2)-[Co(NH(3))(4)P(2)O(7)H(2)](+), and [Rh(H(2)PO(4))(2)(H(2)O)(4)](+). Unlike in experiments using trivalent-metals, these complexes do not change stoichiometry or structure on the timescale of step motion, so that the actual molecular interactions that affect growth can be studied. Step velocity and morphology on the [100] face are unaffected by outer-sphere coordination complexes of either charge. Surprisingly, inner-sphere phosphatoammine complexes do not affect growth rates regardless of how the phosphate group is coordinated to the metal. However, doping the growth solution with [Rh(H(2)PO(4))(2)(H(2)O)(4)](+) results in profound step pinning, matching the behavior of KDP surfaces grown in the presence of Rh(III) after an equilibration period. Not only is an inner-sphere phosphate group needed to dock a trivalent metal to the step edge, but compatible hydrogen bonding of the remainder of the inner-sphere ligands with the bulk lattice is also essential.     

Electrokinetic properties of wavellite and its floatability with cationic and anionic collectors

The reverse apatite flotation with fatty acids has been widely used for the reduction of phosphorus content of magmatic origin iron ores. However, the occurrence of phosphorus intensely disseminated as secondary minerals such as wavellite renders the anionic reverse flotation a challenge. Zeta potential measurements and microflotation tests of wavellite with the use of anionic and cationic collectors were carried out in this work. The wavellite's IEP value was achieved at pH 4.5. Below the IEP value, the surface positively charged sites are made up of aluminum ions. The species H(+), Al(OH)(2)(+), Al(OH)(2+), Al(3+), OH(-), H(2)PO(4)(-), HPO(4)(2-), and PO(4)(3-) play a role in the protonation and deprotonation reactions that will determine the wavellite-solution interface properties. The highest values of wavellite's floatability under basic pH conditions were achieved in the presence of cationic collectors (1 × 10(-4) mol L(-1)). The formation of surface complexes and the precipitation of insoluble salt of aluminum onto wavellite surface seems to be the most likely hypothesis for the chemical nature interactions between amines and wavellite. The surface formation of aluminum oleate on the wavellite's surface seems to be the most probable hypothesis for the adsorption mechanism and the resultant high floatability of wavellite between pH 7.5 and pH 10.0 in the presence of sodium oleate (1 × 10(-4) mol L(-1)). The results showed that the cationic reverse flotation of secondary phosphates is a promising route to reduce the phosphorus content of iron ores from deposits that underwent a supergene enrichment process, since wavellite floatability in the alkaline pH range, using amine as collector, was not significantly affected by the presence of corn starch.     

Photophysical and structural impact of phosphorylated anions associated to lanthanide complexes in water

A new ligand, LC, bis-[(6'-carboxy-2,2'-bipyridine-6-yl)]phenylphosphine oxide, in which the tridentate 6-carboxy-2,2'-bipyridyl arms are directly linked to a phenylphosphine oxide fragment, has been synthesized. The corresponding [Ln.LC]Cl.xH2O complexes (Ln = Eu, x = 4, and Tb, x = 3) were isolated from solutions containing equimolar amounts of LC and hydrated LnCl3 salts and characterized by elemental analysis, mass spectrometry, and infrared spectroscopy. The interactions of the Eu complex with various anions (AMP(2-), ADP3-, ATP,4- HPO4(2-), and NO3-) were studied by titration experiments, using UV-vis, luminescence spectroscopy, and excited-state lifetime measurements. The results are in keeping with strong interactions with the ADP3-, ATP4-, and phosphate anions in TRIS/HCl buffer (0.01 M, pH = 7.0), as revealed by the determination of the conditional stepwise association constants. These values are higher than the one determined for ligand LB, bis[(6'-carboxy-2,2'-bipyridine-6-methyl-yl)]-n-butylamine (Delta log K approximately 1-2). The interaction of complexes [Ln.LB]+ and [Ln.LC]+ with nitrate, monohydrogenophosphate, methyl phosphate (MeP2-), methyldiphosphate (MeDP3-), and methyltriphosphate (MeTP4-) anions was investigated by means of quantum mechanical (QM) calculations. The results, combined with data on the photophysical impact of the sequential competitive binding of anions to the Eu complexes in water, suggest that LB is too flexible to ensure a good coordination pocket, while the molecular structure of ligand LC stabilizes both the formation of the lanthanide complexes and its adducts with ATP.     

Ionic liquid of choline chloride/malonic acid as a solvent in the synthesis of open-framework iron oxalatophosphates

Two new iron(III) oxalatophosphates, Cs2Fe(C2O4)(0.5)(HPO4)2 (1) and CsFe(C2O4)(0.5)(H2PO4)(HPO4) (2), have been synthesized by using a low melting point eutectic mixture of choline chloride and malonic acid as a solvent and characterized by single-crystal X-ray diffraction and magnetic susceptibility. Crystal data are as follows: compound 1, monoclinic, P2(1)/c (No. 14), a = 8.5085(4) A, b = 12.7251(6) A, c = 9.8961(4) A, beta = 107.117(1) degrees , V = 1024.01(8) A(3), Z = 4, and R(1) = 0.0264; compound 2, monoclinic, P2(1)/n (No. 14), a = 8.0038(3) A, b = 10.2923(3) A, c = 11.4755(4) A, beta = 100.507(1) degrees , V = 929.47(5) A(3), Z = 4, and R(1) = 0.0311. The structure of 1 comprises FeO6 octahedra connected by HPO4(2-) tetrahedra and bisbidentate oxalate anions to form a 3D framework containing intersecting 12-ring channels, with the charge-compensating Cs+ cations being located at the intersections of these channels. The structure of 2 consists of 2D layers of octahedral FeO6, tetrahedral H2PO4- and HPO4(2-) moieties, and bisbidentate oxalate ligands with the Cs+ cations between the layers. They are the first examples for the use of ionic liquid as a solvent in the synthesis of metal oxalatophosphates.     

Synthesis and phosphate uptake behavior of Zr4+ incorporated MgAl-layered double hydroxides

We synthesized Zr(4+) incorporated MgAl-layered double hydroxides, Mg(AlZr)-LDH(A) (where A denotes a counteranion in the interlayer space and is expressed as CO(3) for carbonate and Cl for chloride ions), with different molar ratios of Mg/(Al+Zr). Then we characterized their uptake behavior toward phosphate ions. CO(3)-type tertiary LDH materials synthesized at room temperature show low crystallinity, whereas the highly crystalline Cl-type tertiary LDH, [Mg(0.68)Al(0.17)Zr(0.14)(OH)(2)][Cl(0.26)(CO(3))(0.04)1.24H(2)O], was synthesized for the first time using a hydrothermal treatment at 120 degrees C. The distribution coefficients (K(d)) of oxo-anions were measured with a mixed solution containing trace amounts of the anions. The selectivity sequences were Cl(-), NO(-)(3)相似文献   

Micro-Raman observation on the HPO4(2-) association structures in an individual dipotassium hydrogen phosphate (K2HPO4) droplet

A single K(2)HPO(4) droplet with size of ～50 μm on a Teflon substrate was forced to enter into the supersaturated state by decreasing the relative humidity (RH), allowing accurate control over the concentration of the solute within a droplet of a nanogram. The K(2)HPO(4) solutions from dilute (0.1-1.0 mol·L(-1) bulk) to concentrated state (a droplet from RH 98.2% to 25.1%) were studied through micro-Raman spectroscopy in the spectral region of about 200-4000 cm(-1). The area ratio between the water stretching band to the sum of the ν(1)-PO(3), ν(2)-POH, and ν(4)-PO(3) bands of the HPO(4)(2-) at various RHs was used to describe the dehydration behavior of a microsized single K(2)HPO(4) droplet in dehumidifying process. The peak position of the v(1)-PO(3) band for the 1 mol·L(-1) bulk solution appeared at 991 cm(-1) and moved to 986 cm(-1) at 98.2% RH, to 978 cm(-1) at 70.2% RH, and then to 964 cm(-1) at 30.0% RH for a droplet, accompanying an increase of the full width at half-height (fwhh) of this peak from 16.3 to 17.2, 22.2, and then to 24.2 cm(-1), indicating transition of the HPO(4)(2-) anions from monomers to dimers/trimers/oligomers and then to polyanions with chain structures in the K(2)HPO(4) solutions. After 25.1% RH, the solid was proved to be K(2)HPO(4)·3H(2)O according to the Raman spectral features. Furthermore, the O-H stretching envelope of a K(2)HPO(4) droplet showed that the intensity ratios of the strong hydrogen bonding component (3255 cm(-1)) to the weak one (3417 cm(-1)) and the cage-like water (2925 cm(-1)) to the weak one (3417 cm(-1)) were sensitive to the HPO(4)(2-) association structures, which can be used to understand the effects of dimers/trimers/oligomers and chain structures of the HPO(4)(2-) associations on the hydrogen bonding of water molecules.     

Electronic Structure of [Pt(2)(&mgr;-O(2)CCH(3))(4)(H(2)O)(2)](2+) Using the Quasi-Relativistic Xalpha-SW Method: Analysis of Metal-Metal Bonding, Assignment of Electronic Spectra, and Comparison with Rh(2)(&mgr;-O(2)CCH(3))(4)(H(2)O)(2)

The electronic structure and metal-metal bonding in the classic d(7)d(7) tetra-bridged lantern dimer [Pt(2)(O(2)CCH(3))(4)(H(2)O)(2)](2+) has been investigated by performing quasi-relativistic Xalpha-SW molecular orbital calculations on the analogous formate-bridged complex. From the calculations, the highest occupied and lowest unoccupied metal-based levels are delta(Pt(2)) and sigma(Pt(2)), respectively, indicating a metal-metal single bond analogous to the isoelectronic Rh(II) complex. The energetic ordering of the main metal-metal bonding levels is, however, quite different from that found for the Rh(II) complex, and the upper metal-metal bonding and antibonding levels have significantly more ligand character. As found for the related complex [W(2)(O(2)CH)(4)], the inclusion of relativistic effects leads to a further strengthening of the metal-metal sigma bond as a result of the increased involvement of the higher-lying platinum 6s orbital. The low-temperature absorption spectrum of [Pt(2)(O(2)CCH(3))(4)(H(2)O)(2)](2+) is assigned on the basis of Xalpha-SW calculated transition energies and oscillator strengths. Unlike the analogous Rh(II) spectrum, the visible and near-UV absorption spectrum is dominated by charge transfer (CT) transitions. The weak, visible bands at 27 500 and 31 500 cm(-)(1) are assigned to Ow --> sigma(Pt(2)) and OAc --> sigma(Pt(2)) CT transitions, respectively, although the donor orbital in the latter transition has around 25% pi(Pt(2)) character. The intense near-UV band around 37 500 cm(-)(1) displays the typical lower energy shift as the axial substituents are changed from H(2)O to Cl and Br, indicative of significant charge transfer character. From the calculated oscillator strengths, a number of transitions, mostly OAc --> sigma(Pt-O) CT in nature, are predicted to contribute to this band, including the metal-based sigma(Pt(2)) --> sigma(Pt(2)) transition. The close similarity in the absorption spectra of the CH(3)COO(-), SO(4)(2)(-), and HPO(4)(2)(-) bridged Pt(III) complexes suggests that analogous spectral assignments should apply to [Pt(2)(SO(4))(4)(H(2)O)(2)](2)(-) and [Pt(2)(HPO(4))(4)(H(2)O)(2)](2)(-). Consequently, the anomalous MCD spectra reported recently for the intense near-UV band in the SO(4)(2)(-) and HPO(4)(2)(-) bridged Pt(III) complexes can be rationalized on the basis of contributions from either SO(4) --> sigma(Pt-O) or HPO(4) --> sigma(Pt-O) CT transitions. The electronic absorption spectrum of [Rh(2)(O(2)CCH(3))(4)(H(2)O)(2)] has been re-examined on the basis of Xalpha-SW calculated transition energies and oscillator strengths. The intense UV band at approximately 45 000 cm(-)(1) is predicted to arise from several excitations, both metal-centered and CT in origin. The lower energy shoulder at approximately 40 000 cm(-)(1) is largely attributed to the metal-based sigma(Rh(2)) --> sigma(Rh(2)) transition.     

A naphthalene exciplex based Al3+ selective on-type fluorescent probe for living cells at the physiological pH range: experimental and computational studies

2-((Naphthalen-6-yl)methylthio)ethanol (HL) was prepared by one pot synthesis using 2-mercaptoethanol and 2-bromomethylnaphthalene. It was found to be a highly selective fluorescent sensor for Al(3+) in the physiological pH (pH 7.0-8.0). It could sense Al(3+) bound to cells through fluorescence microscopy. Metal ions like Mn(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+), Cr(3+) and Pb(2+) did not interfere. No interference was also observed with anions like Cl(-), Br(-), F(-), SO(4)(2-), NO(3)(-), CO(3)(2-), HPO(4)(2-) and SCN(-). Experimentally observed structural and spectroscopic features of HL and its Al(3+) complex have been substantiated by computational calculations using density functional theory (DFT) and time dependent density functional theory (TDDFT).     

An approach to the synthesis of polyoxometalate encapsulating different kinds of oxoanions as heteroions: bisphosphitopyrophosphatotriacontamolybdate [(HPO3)2(P2O7)Mo30O90]8-

A yellow [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was prepared as a tetrapropylammonium (Pr(4)N(+)) salt from a 50 mM Mo(VI)-2 mM P(2)O(7)(4-)-4 mM HPO(3)(2-)-0.95 M HCl-60% (v/v) CH(3)CN system at ambient temperature. The (Pr(4)N)(8)[(HPO(3))(2)(P(2)O(7))Mo(30)O(90)] salt crystallized in the orthorhombic space group P(nma) (No. 62), with a = 30.827(2) A, b = 22.8060(15) A, c = 30.928(2) A, V = 21743(3) A(3), and Z = 4. The structure contained a (P(2)O(7))Mo(12)O(42) fragment derived from the removal of each corner-shared Mo(3)O(13) unit in a polar position from a [(P(2)O(7))Mo(18)O(54)](4-) structure, and each side of the (P(2)O(7))Mo(12)O(42) fragment was capped by a B-type (HPO(3))Mo(9)O(24) unit. The [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion was characterized by voltammetry and IR, UV-vis, and (31)P NMR spectroscopy. Unlike the Keggin and Dawson anions and the parent [(P(2)O(7))Mo(18)O(54)](4-) anion, the [(HPO(3))(2)(P(2)O(7))Mo(30)O(90)](8-) anion exhibited two-electron redox waves in CH(3)CN with and without acid.