Synthesis of spiro[3,4‐diaryl‐4,5‐dihydroisoxazole‐5,2′‐1′,2′,3′,4‐tetrahydro‐1′‐naphthalenone]

Synthesis of a series of novel spiro[3,4‐diaryl‐4,5‐dihydroisoxazole‐5,2′‐1′,2′,3′,4′‐tetrahydro‐1′‐naphthalenone] has been described by the regioselective cycloaddition of nitrile oxides with 2‐arylmethylene‐1,2,3,4‐tetrahydro‐1‐naphthalenone. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:463–467, 2001     

NMR analysis of 6‐(2′,3′‐dihydro‐1′H‐inden‐1′‐yl)‐1H‐indene

¹H, ¹³C and two‐dimensional NMR analyses were applied to determine the NMR parameters of 6‐(2′,3′‐dihydro‐1′H‐inden‐1′‐yl)‐1H‐indene. The measurements were accomplished with 0.5 mg of the substance, this quantity being sufficient to determine the chemical shifts of all the H and C atoms, and also the appropriate coupling constants and to give the complete NMR resonance assignments of the molecule. The predicted patterns of the four different H atoms of the methylene groups of the indane structural element coincided completely with the complex patterns in the NMR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

2′‐Hydroxy‐4′′‐dimethylaminochalcone

The title compound, 3‐[4‐(di­methyl­amino)­phenyl]‐1‐(2‐hydroxy­phenyl)­prop‐2‐en‐1‐one, C₁₇H₁₇NO₂, is a chalcone derivative substituted by 2′‐hydroxyl and 4′′‐di­methyl­amino groups. The crystal structure indicates that the aniline and hydroxy­phenyl groups are nearly coplanar, with a dihedral angle of 10.32 (16)° between their phenyl rings. The molecular planarity of this substituted chalcone is strongly affected by the 2′‐hydroxyl group.     

2,3,3′,6‐Tetra‐O‐acetyl‐4,1′,6′‐trichloro‐4,1′,4′,6′‐tetradeoxygalactosucrose

At 160 K, one of the Cl atoms in the furanoid moiety of 3‐O‐acetyl‐1,6‐di­chloro‐1,4,6‐tri­deoxy‐β‐d ‐fructo­furan­osyl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, C₂₀H₂₇­Cl₃O₁₁, is disordered over two orientations, which differ by a rotation of about 107° about the parent C—C bond. The conformation of the core of the mol­ecule is very similar to that of 3‐O‐acetyl‐1,4,6‐tri­chloro‐1,4,6‐tri­deoxy‐β‐d ‐tagato­furanos­yl 2,3,6‐tri‐O‐acetyl‐4‐chloro‐4‐deoxy‐α‐d ‐galacto­pyran­oside, particularly with regard to the conformation about the glycosidic linkage.     

Synthesis and Hybridization Properties of an Oligonucleotide Consisting of 1′,4′‐Anhydro‐2′,5′‐dideoxy‐2′‐(thymin‐1‐yl)‐D‐altritol

The novel oligonucleotide analogue 7 , consisting of 1′,4′‐anhydro‐2′,5′‐dideoxy‐2′‐(thymin‐1‐yl)‐D ‐altritol ( 4 ), residues was synthesized by the phosphoramidite approach on an automated DNA synthesizer. The phosphoramidite building block 6 was obtained by phosphitylation of the corresponding isonucleoside 5 . Oligoisonucleotide 7 contains an extended phosphodiester linkage with a higher flexibility. Oligoisonucleotide 7 was studied with respect to hybridization properties, enzymatic stability, and CD spectra. It exhibits a high stability towards snake‐venom phosphodiesterase and an acceptable hybridization to complementary single‐stranded DNA and RNA.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

1,1′‐Di­acetyl‐3‐hydroxy‐2,2′,3,3′‐tetra­hydro‐3,3′‐bi(1H‐indole)‐2,2′‐dione

In the title compound, C₂₀H₁₆N₂O₅, both of the 1‐acetyl­isatin (1‐acetyl‐1H‐indole‐2,3‐dione) moieties are planar and form a dihedral angle of 74.1 (1)°. Weak intermolecular hydrogen bonds and C—H?π interactions stabilize the packing in the crystal.     

Syntheses of Some 3—[1′（1′H）—Substituent—pyrazol—5′—yl] benzo [5,6] coumarins

3-[1′(1′H)-Substituent-pyrazol-5′-yl]benzo[5,6]coumarins and 3-(1′,2′-oxazol-5′-yl)benzo[5,6]coumarin were prepared via condensation of 3-(2′-formyl-1′-chlorovinyl)benzo[5,6] coumarin with hydrazine derivatives or hydroxylamine.Reaction of 3-[1′(1′H)-pyrazol-5′-yl]benzo[5,6]coumarin with alkyl halides,olefinic compunds or acid chlorides are described.     

μ‐2,2′,6,6′‐Tetramethyl‐4,4′‐bipyridine‐κ2N1:N1′‐bis[(diethylenetriamine‐κ3N,N′,N′′)palladium(II)] tetranitrate

The title compound, [Pd₂(C₄H₁₃N₃)₂(C₁₄H₁₆N₂)](NO₃)₄, comprises discrete tetracationic dumbbell‐type dinuclear complex molecules and noncoordinating nitrate anions. Two Pd(dien)²⁺ moieties (dien is diethylenetriamine) are joined by the rigid linear exo‐bidentate bridging 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine ligand to form the dinuclear complex, which lies across a centre of inversion in the space group P2₁/n, so that the rings in the 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine bridging ligand are parallel. In the crystal, the primary and secondary amino groups of the dien ligand act as hydrogen‐bond donors towards the nitrate anions to form a three‐dimensional hydrogen‐bond network.     

(S,S)‐4′′‐Cyano‐7,7′′‐dimethoxy‐3′,6′‐dioxodispiro[indane‐2,2′‐piperazine‐5′,2′′‐indane]‐4‐carboxamide methanol solvate: interrupting the amide‐to‐amide hydrogen‐bonded tape

The title methanol solvate, C₂₄H₂₂N₄O₅·CH₃OH, forms an extended three‐dimensional hydrogen‐bonded structure, assisted by the presence of several good donor and acceptor sites. It shows none of the crystal packing features typically expected of piperazinediones, such as amide‐to‐amide R₂²(8) hydrogen bonding. In this structure the methanol solvent appears to play only a space‐filling role; it is not involved in any hydrogen bonding and instead is disordered over several sites. This study reports, to the best of our knowledge, the first crystal structure of an indane‐containing piperazinedione compound which exhibits a three‐dimensional hydrogen‐bonded structure formed by classical (N—H...O and N—H...N) hydrogen‐bonding interactions.     

Dispiro[indene‐2,5′‐indeno[2,1‐a]fluorene‐6′,2′′‐indene]‐1,1′′,3,3′′,11′,12′‐hexaone: a three‐dimensional hydrogen‐bonded framework

The title compound, C₃₆H₁₆O₆, (I), was obtained as a new and unexpected oxidation product of 1,2′‐biindene‐1′,3,3′(2H)‐trione. The molecules of (I) exhibit approximate, but noncrystallographic, twofold rotation symmetry and the central ring of the fused pentacyclic portion is distinctly puckered, with a conformation intermediate between half‐chair and screw‐boat. Six independent C—H...O hydrogen bonds link the molecules into a three‐dimensional framework structure of considerable complexity. Comparisons are drawn between the crystal structure of (I) and those of several simpler analogues, which show wide variation in their patterns of supramolecular aggregation.     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

An Efficient Synthesis of 1′,7′,8′,9′‐Tetrahydrospiro[indoline‐3,4′‐pyrazolo[3,4‐b]quinoline]‐2,5′(6′H)‐dione Derivatives in Aqueous Medium

An efficient and green reactions of isatins, 3‐amine‐1H‐pyrazole (5‐methyl‐1H‐pyrazol‐3‐amine) and 1,3‐diketone in aqueous medium for the synthesis of novel 1′,7′,8′,9′‐tetrahydrospiro[indoline‐3,4′‐pyrazolo[3,4‐b]quinoline]‐2,5′(6′H)‐dione derivatives were reported in this research. The advantages of this reaction are simple operation, mild‐reaction conditions, wide scope substrate, high yields, and friendly environment. The products were confirmed by IR, ¹H NMR, ¹³C NMR, and HRMS.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Unanticipated products from reductive and oxidative cleavages of 1‐substituted 3,3‐diphenyl‐1′‐methylspiro[azetidine‐2,3′‐indoline]‐2′,4‐diones

Titled spiroazetidinones 1a , 1b undergo reductive cleavage on treatment with excess lithium aluminum hydride forming 3‐benzhydryl‐1‐methylindole as the main product together with a γ‐amino alcohol depending upon the substituent present on the azetidin‐2‐one ring. Treatment of 1a with Ce(IV) ammonium nitrate affords 2‐hydroxy‐N‐(4‐methoxyphenyl)‐2,2‐diphenylacetamide besides the anticipated N‐unsubstituted 2‐azetidinone, whereas a similar treatment of 1‐benzhydryl‐3,3‐diphenyl‐2‐azetidinone 1b affords the ring expansion product 1,3‐oxazolidin‐4‐one. The products have been characterized on the basis of satisfactory analytical and spectral (IR, ¹H and ¹³C‐NMR, DEPT, HMBC) data and their formation is discussed. J. Heterocyclic Chem., (2011).     

Synthesis and photophysical properties of 2,5,8,11‐tetrakis(5‐hexylthiophen‐2‐yl)tetrathieno[2,3‐a:3′,2′‐c:2′′,3′′‐f:3′′′,2′′′‐h]naphthalene

The title compound, C₅₈H₆₄S₈, has been prepared by Pd‐catalysed direct C—H arylation of tetrathienonaphthalene (TTN) with 5‐hexyl‐2‐iodothiophene and recrystallized by slow evaporation from dichloromethane. The crystal structure shows a completely planar geometry of the TTN core, crystallizing in the monoclinic space group P2₁/c. The structure consists of slipped π‐stacks and the interfacial distance between the mean planes of the TTN cores is 3.456 (5) Å, which is slightly larger than that of the comparable derivative of tetrathienoanthracene (TTA) with 2‐hexylthiophene groups. The packing in the two structures is greatly influenced by both the aromatic core of the structure and the alkyl side chains.     

Synthetic approaches to 4,8‐dimethyl‐5′‐(N‐pyridiniummethyl)‐ 4′,5′‐dihydropsoralens and 4,8‐dimethyl‐5′‐ (N‐aminomethyl)‐ 4′,5′‐dihydropsoralens

New synthetic approaches to 4,8‐dimethyl‐5′‐(N‐pyridiniummethyl)‐4′,5′‐dihydropsoralens and 4,8‐dimemyl‐5′‐(N‐aminomethyl)‐4′,5′‐dihydropsoralens are described. The 5′‐halomethyl‐4′,5′‐dihydro‐psoralen precursors are formed by electrophilic ring closures of 4,8‐dimethyl‐6‐allyl‐7‐hydroxycoumarin. The ring‐closure reactions may also be applied to the synthesis of 5′‐halomethyl‐4‐methyl‐4′,5′‐dihydroangelicins. The compounds are potential therapeutic agents for improved psoralen ultraviolet A radiation treatment.     

4,1′,6′‐Trichloro‐4,1′,6′‐trideoxysucrose monohydrate

At 160 K, the gluco­pyran­osyl ring in 1,6‐di­chloro‐1,6‐di­deoxy‐β‐d ‐fructo­furan­osyl 4‐chloro‐4‐deoxy‐α‐d ‐gluco­pyran­oside monohydrate, C₁₂H₁₉Cl₃O₈·H₂O, has a near ideal ⁴C₁ chair conformation, while the fructo­furan­osyl ring has a ⁴T₃ conformation. The conformation of the sugar mol­ecule is quite different to that of sucralose, particularly in the conformation about the glycosidic linkage, which affects the observed pattern of intramolecular hydrogen bonds. A complex series of intermolecular hydrogen bonds links the sugar and water mol­ecules into an infinite three‐dimensional framework.     

4′‐Iodo‐2,2′:6′,2′′‐terpyridine

In the nearly planar title compound, C₁₅H₁₀IN₃, the three pyridine rings exhibit transoid conformations about the interannular C—C bonds. Very weak C—H...N and C—H...I interactions link the molecules into ribbons. Significant π–π stacking between molecules from different ribbons completes a three‐dimensional framework of intermolecular interactions. Four different packing motifs are observed among the known structures of simple 4′‐substituted terpyridines.