Carbofunctional sulfur‐containing organosilicon compounds

This review summarizes literature data and the authors’ own research results from the past 14–15 years relating to practical, valuable organosilicon carbofunctional sulfur‐containing compounds of general formula R_4−n Si(S_x R¹)_n , where R is alkyl, arylalkoxyl, aroxyl or even sylatranyl fragment, R¹ is hydrogen, alkyl, aryl, alkenyl, etc., n = 1–3, x = 1–10, having sulfur functional groups such as thiol, sulfide, di‐ and polysulfide, as well as sulfur heteroatomic groups such as thiocarbamide, dioxothiocarbamide, dithiourethane, thiuramdisulfide, etc. The compounds reviewed have been found to be effective, for example, as ingredients for rubber compositions for non‐flammable, water‐ and wear‐proof tires or as ion‐exchanging and complexing sorbents of heavy and noble metals.     

Reactions of nitroxides with sulfur‐containing compounds,part IV: Synthesis of novel nitroxide (thio)ureas1

The reactions of 4‐isothiocyanato‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl 2 and 4‐isocyanato‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl 3 with selected amines and lower alcohols give the corresponding novel thioureas 4 , ureas 5 , thiocarbamates 6 , and carbamates 7 , all bearing the nitroxyl moiety. The characteristic features of EI mass spectra of (thio)ureas 4 and 5 are described. Some of the synthesized thioureas 4 , ureas 5 , thiocarbamates 6 , and carbamates 7 are moderately or weakly active against pathogenic fungi. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:393–401, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20228     

Polarizable empirical force field for sulfur‐containing compounds based on the classical Drude oscillator model

Condensed‐phase computational studies of molecules using molecular mechanics approaches require the use of force fields to describe the energetics of the systems as a function of structure. The advantage of polarizable force fields over nonpolarizable (or additive) models lies in their ability to vary their electronic distribution as a function of the environment. Toward development of a polarizable force field for biological molecules, parameters for a series of sulfur‐containing molecules are presented. Parameter optimization was performed to reproduce quantum mechanical and experimental data for gas phase properties including geometries, conformational energies, vibrational spectra, and dipole moments as well as for condensed phase properties such as heats of vaporization, molecular volumes, and free energies of hydration. Compounds in the training set include methanethiol, ethanethiol, propanethiol, ethyl methyl sulfide, and dimethyl disulfide. The molecular volumes and heats of vaporization are in good accordance with experimental values, with the polarizable model performing better than the CHARMM22 nonpolarizable force field. Improvements with the polarizable model were also obtained for molecular dipole moments and in the treatment of intermolecular interactions as a function of orientation, in part due to the presence of lone pairs and anisotropic atomic polarizability on the sulfur atoms. Significant advantage of the polarizable model was reflected in calculation of the dielectric constants, a property that CHARMM22 systematically underestimates. The ability of this polarizable model to accurately describe a range of gas and condensed phase properties paves the way for more accurate simulation studies of sulfur‐containing molecules including cysteine and methionine residues in proteins. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Theoretical investigation on sulfur‐containing chelating resin‐divalent metal complexes

The complex structures and interactions of sulfur‐containing chelating resin poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfide (PVBS), poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfoxide (PVBSO), and poly[4‐vinylbenzyl‐(2‐hydroxyethyl)]sulfone (PVBSO₂) with divalent metal chlorides (Cu(II), Ni(II), Zn(II), Cd(II), and Pd(II)) were investigated theoretically. Results indicate that PVBS tends to coordinate with metal ions by sulfur and oxygen atoms forming five‐membered ring chelating complexes; while PVBSO and PVBSO₂ prefer to interact with metal ions by the oxygen atom of the sulfoxide or sulfone and hydroxyl group to form six‐membered ring chelating compounds. Theoretical calculations reveal that sulfur atoms of PVBS are the main contributor when coordinate with metal ions, while oxygen atoms also take part in the coordination with Cu(II), Zn(II), and Cd(II). As for PVBSO, the oxygen atoms of sulfoxide group play a key role in the coordination, but sulfur and hydroxyl oxygen also participate in the coordination. Similarly, sulfone group oxygen atoms of PVBSO₂ dominate the coordination of Ni(II), Cu(II), and Pd(II), while the affinities of Zn(II) and Cd(II) are mainly attributed to the hydroxyl oxygen atoms. The computational results are in good agreement with the XPS analysis. Combined the theoretical and experimental results, further understanding of the structural information on the complexes was achieved and the adsorption mechanism was confirmed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Theoretical study on the interaction of sulfur‐ and aminopyridine‐containing chelating resins with Hg(II) and Pb(II)

The geometries and energetics of complexes of Hg(II) and Pb(II) with sulfur‐ and aminopyridine‐containing chelating resin including crosslinked polystyrene immobilizing 2‐aminopyridine via sulfur‐containing (PVBS‐AP), sulfoxide‐containing (PVBSO‐AP), and sulfone‐containing (PVBSO₂‐AP) spacer arms have been investigated theoretically, and thus interactions of the metal ions with chelating resins were evaluated. The results indicate that PVBS‐AP behaves as a tridentate ligand to coordinate with the metal ions by S and two N atoms to form chelating compounds with S atom playing a dominant role in the coordination, whereas PVBSO‐AP and PVBSO₂‐AP interact with metal cations, respectively, in a tricoordinate manner by O and two N atoms forming chelating complexes. Furthermore, it is revealed that O and N2 atoms of PVBSO‐AP are the main contributor of coordination to Hg(II), whereas N2 atom of PVBSO₂‐AP is mainly responsible for the coordination to Hg(II). For PVBSO‐AP‐Pb²⁺ and PVBSO₂‐AP‐Pb²⁺ complex, the coordination is dominated by the synergetic effect of N1, N2, and O atoms. Natural bond orbital and second‐order perturbation analyses suggest that the charge transfer from the chelating resins to metal ions is mainly dominated by the interactions of lone pair of electrons of the donor atoms with the unoccupied orbitals of metal ions. Hg(II) complexes exhibit larger binding energies than the corresponding Pb(II) complexes, implying the chelating resins exhibit higher affinity toward Hg(II), which is consistent with the experimental results. Combined the theoretical and experimental results, further understanding of the structural information of the complexes and the coordination mechanism was achieved. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Primary amido substituted diborane4 compounds and imidodiborate4 anions

Treatment of the diborane(4) compound B(2)(NMe(2))(4) with aniline or 2,6-dimethylaniline results in the primary amido compounds B(2)(NHR)(4)(R = Ph, 2,6-Me(2)C(6)H(3)); subsequent treatment with n-BuLi in toluene in each case affords the first examples of anionic imidodiborates namely Li(4)(thf)(6)B(2)(NPh)(4) and Li(4)(thf)(4)B(2)(N-2,6-Me(2)C(6)H(3))(4); all complexes have been characterised crystallographically.     

Reactivity of a Tetra(o‐tolyl)diborane(4) Dianion as a Diarylboryl Anion Equivalent

Lithium and magnesium salts of tetra(o‐tolyl)diborane(4) dianion, having B=B double bond character, were synthesized. It was clarified that the lithium salt of the dianion has a high‐lying HOMO and a narrow HOMO–LUMO gap, which were perturbed by dissociation of Li⁺ cation, as judged by UV/Vis spectroscopy and DFT calculations. The lithium salt of the dianion reacted as two equivalents of a diarylboryl anion with CH₂Cl₂ or S₈ to give boryl‐substituted products.     

Highly refractive polymer resin derived from sulfur‐containing aromatic acrylate

New sulfur‐containing polymers with high‐refractive indices and low birefringences have been developed as UV‐curable high‐refractive polymer resins. The polymers derived from 2,7‐bis[(2‐acryloylethyl)sulfanyl]thianthrene (2,7‐BAST) and 4,4′‐bis[(acryloyloxyethylthio)diphenylsulfide (4,4′‐BADS) were prepared by photopolymerization under UV irradiation. Transparent UV‐cured films were obtained in both cases. Both polymers showed good thermal stability, such as a 5% weight‐loss temperature at 355 °C under nitrogen and glass transition temperatures (T_g) in the range of 94–143 °C. They also showed high‐refractive indices of 1.6531 and 1.6645 at 632.8 nm and low birefringences of 0.0039 and 0.0069 in addition to high transparency in the visible region. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2604–2609, 2010     

X‐ray investigations of sulfur‐containing fungicides. IV. 4′‐{[Benzoyl(4‐chlorophenylhydrazono)methyl]sulfonyl}acetanilide and 4′‐{[benzoyl(4‐methoxyphenylhydrazono)methyl]sulfonyl}acetanilide

The conformations of the two approximately isomorphous structures 4′‐{[benzoyl(4‐chloro­phenyl­hydrazono)­methyl]­sul­fonyl}acetanilide, C₂₂H₁₈ClN₃O₄S, and 4′‐{[benzoyl(4‐meth­oxy­phenyl­hydrazono)­methyl]­sulfonyl}acetanilide, C₂₃H₂₁N₃­O₅S, are stabilized by resonance‐assisted intramolecular hydrogen bonds linking the hydrazone moieties and sulfonyl groups. The stronger bond is observed in the former compound. The difference in electronic properties between the Cl atom and the methoxy group is too small to significantly alter the non‐bonding interactions of the sulfonyl and β‐­carbonyl groups.     

Titanium complexes with sulfur‐linked bis(phenolate) ligands

High‐quality crystals of two bis(phenolate)titanium complexes, namely dichlorido{4,4′‐dimethyl‐2,2′‐[cyclohexane‐1,2‐diylbis(sulfanediyl)]diphenolato}titanium(IV), [Ti(C₂₀H₂₂O₂S₂)Cl₂], (I), and dichlorido{2,2′‐[cyclohexane‐1,2‐diylbis(sulfanediyl)]diphenolato}titanium(IV), [Ti(C₁₈H₁₈O₂S₂)Cl₂], (II), were obtained by reactive crystallization. Depending on the solvent, compound (II) was obtained as unsolvated (IIa) or as the toluene hemisolvate, [Ti(C₁₈H₁₈O₂S₂)Cl₂]·0.5C₇H₈, (IIb). These systems without bulky substituents on the aromatic phenolate rings serve as ideal model compounds for precatalysts. The excellent X‐ray diffraction data will help clarify the nature of the mismatched interactions between the soft S atoms within the ligand and the hard titanium center. Molecule (I) has crystallographic C₂ symmetry.     

A variable‐temperature study of 1,2‐bis(dimethylamino)‐1,2‐bis(2,6‐dimethylanilino)diborane

The title compound, C₂₀H₃₂B₂N₄, is monoclinic at ambient temperature but triclinic (pseudo‐monoclinic) below 150 K. The structures of the two phases, determined at 200 and 120 K, respectively, are very similar, the molecular symmetry being crystallographic C₂ and approximate (local) C₂, respectively. There is significant π conjugation within each N—B—N moiety, but none between them or between the N—B—N and arene moieties.     

Synthesis and properties of sulfur‐contained poly(silylene arylacetylene)s

Poly(silylene arylacetylene) (PSA) is a kind of poly(arylacetylene) silicon‐containing resins with excellent heat resistance and good mechanical performances. In this article, the sulfur atom is introduced into the main chain of the PSA molecule to obtain a sulfur‐containing poly(silylene arylacetylene), named S‐PSA. By Williamson and Sonogashira reactions, bis(4‐ethynylphenyl)sulfide and bis(4‐ethynylphenyl)sulfone were synthesized. Thereafter, through Grignard reagent way, the poly(silylene ethynylene phenylene sulfide phenylene ethynylene) (PSESE) and poly(silylene ethynylene phenylene sulfone phenylene ethynylene) (PSESO₂E) were synthesized from bis(4‐ethynylphenyl)sulfide, bis(4‐ethynylphenyl)sulfone, and methylphenyl dichlorosilane. Poly(silylene ethynylene phenylene sulfoxide phenylene ethynylene) (PSESOE) was synthesized by the oxidation of PSESE. The structures and properties of these resins were characterized and the mechanical properties of the T300 reinforced composites were tested. The results show that the novel S‐PSA resins have excellent heat resistance and good mechanical properties, and could be used as resin matrices for high‐performance composites in high‐tech fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2324–2332     

Three structures containing (E)‐1,2‐bis­(benzimidazol‐2‐yl)ethene groups

Two of the title compounds, namely (E)‐1,2‐bis­(1‐methyl­benzimidazol‐2‐yl)ethene, C₁₈H₁₆N₄, (Ib), and (E)‐1,2‐bis­(1‐ethyl­benzimidazol‐2‐yl)ethene, C₂₀H₂₀N₄, (Ic), consist of centrosymmetric trans‐bis­(1‐alkyl­benzimidazol‐2‐yl)ethene mol­ecules, while 3‐eth­yl‐2‐[(E)‐2‐(1‐ethyl­benzimidazol‐2‐yl)­ethen­yl]benzimidazol‐1‐ium perchlorate, C₂₀H₂₁N₄⁺·ClO₄⁻, (II), contains the monoprotonated analogue of compound (Ic). In the three structures, the benzimidazole and benzimidazolium moieties are essentially planar; the geometric parameters for the ethene linkages and their bonds to the aromatic groups are consistent with double and single bonds, respectively, implying little, if any, conjugation of the central C=C bonds with the nitro­gen‐containing rings. The C—N bond lengths in the N=C—N part of the benzimidazole groups differ and are consistent with localized imine C=N and amine C—N linkages in (Ib) and (Ic); in contrast, the corresponding distances in the benzimidazolium cation are equal in (II), consistent with electron delocalization resulting from protonation of the amine N atom. Crystals of (Ib) and (Ic) contain columns of parallel mol­ecules, which are linked by edge‐over‐edge C—H⋯π overlap. The columns are linked to one another by C—H⋯π inter­actions and, in the case of (Ib), C—H⋯N hydrogen bonds. Crystals of (II) contain layers of monocations linked by π–π inter­actions and separated by both perchlorate anions and the protruding eth­yl groups; the cations and anions are linked by N—H⋯O hydrogen bonds.     

Monodentate and bridging behaviour of the sulfur‐containing ligand 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine in two discrete zinc(II) complexes with acetylacetonate

The Zn complexes bis(acetylacetonato‐κ²O,O′)bis{4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κN¹}zinc(II), [Zn(C₅H₇O₂)₂(C₂₂H₁₇N₃S)₂], (I), and {μ‐4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κ²N¹:N^1′′}bis[bis(acetylacetonato‐κ²O,O′)zinc(II)], [Zn₂(C₅H₇O₂)₄(C₂₂H₁₇N₃S)], (II), are discrete entities with different nuclearities. Compound (I) consists of two centrosymmetrically related monodentate 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine (L1) ligands binding to one Zn^II atom sitting on an inversion centre and two centrosymmetrically related chelating acetylacetonate (acac) groups which bind via carbonyl O‐atom donors, giving an N₂O₄ octahedral environment for Zn^II. Compound (II), however, consists of a bis‐monodentate L1 ligand bridging two Zn^II atoms from two different Zn(acac)₂ fragments. Intra‐ and intermolecular interactions are weak, mainly of the C—H...π and π–π types, mediating similar layered structures. In contrast to related structures in the literature, sulfur‐mediated nonbonding interactions in (II) do not seem to have any significant influence on the supramolecular structure.     

Synthesis and properties of highly refractive polyimides derived from fluorene‐bridged sulfur‐containing dianhydrides and diamines

Highly refractive and transparent polyimides (PIs) based on fluorene‐bridged and sulfur‐containing monomers have been developed. An aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), was polymerized with several fluorene‐containing diamines, including commercially available 9,9′‐bis(p‐aminophenyl)fluorene (APF), 9,9′‐bis[4‐(p‐aminophenoxy)phenyl]fluorene (OAPF), and newly synthesized 9,9′‐bis[4‐(p‐aminophenyl)sulfanylphenyl]fluorene (ASPF) to afford series A PIs. Meanwhile, series B PIs were obtained from a new dianhydride, 4,4′‐[(9H‐fluorene‐9‐ylidene)bis(p‐phenylsulfanyl)]diphthalic anhydride (FPSP) and two aromatic diamines, ASPF and 4,4′‐thiobis[(p‐phenylenesulfanyl)aniline] (3SDA) via a two‐step polycondensation procedure. The PIs exhibit good thermal stabilities, such as relatively high glass transition temperatures in the range of 220–270 °C and high initial thermal decomposition temperatures (T_10%) exceeding 490 °C. The 9,9′‐disubstituted fluorene moieties endow the PI films with good optical transparency. The optical transmittances of the PI films at 450 nm are all higher than 80% for the thickness of about 10 μm. Furthermore, the highly aromatic fluorene moiety and flexible thioether linkages in the molecular chains of the PIs provide them with high refractive indices of 1.6951–1.7258 and small birefringence of 0.0056–0.0070. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1510–1520, 2008     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Anchoring of sulfur‐containing alkylphosphonic and semifluorinated alkylphosphonic molecules on a polycrystalline aluminum substrate

Self‐assembly on a polycrystalline aluminum substrate of two sulfur‐containing alkylphosphonic acids, CH₃? (CH₂)₁₁? S? (CH₂)₂? PO(OH)₂, and CF₃? (CF₂)₇? (CH₂)₂? S? (CH₂)₂? PO(OH)₂, has been compared with CH₃? (CH₂)₁₅? PO(OH)₂. The reaction of the phosphonic head groups with the hydroxyls at the alumina surface to form phosphonates was studied with X‐ray photoelectron spectroscopy (XPS) and polarization modulation infrared reflection‐absorption spectroscopy (PM‐IRRAS). Barrier effects of the resulting layers was assessed by electrochemical polarization curves. With the conditions used in the present work for the self‐assembly reaction, it appears that the sulfur‐containing molecules do not perform as well as CH₃? (CH₂)₁₅? PO(OH)₂ in terms of film quality. Questions are raised about the possibility that the sulfur‐containing molecules could undergo cleavage during surface modification. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of novel nitrogen‐ and sulfur‐containing conjugated polymers used as hole‐transporting materials for organic light‐emitting diodes

Two series of highly soluble novel nitrogen‐ and sulfur‐containing conjugated polymers were synthesized via an acid‐induced self‐polycondensation of functional monomers with methyl sulfinyl and aromatic groups. The well‐defined structures of synthesized polymers were confirmed by their NMR and IR spectra. The highest occupied molecular orbital energy values for these materials, estimated by cyclic voltammetry, showed a broad range of values from about 5.0 to 5.2 eV used as hole‐transport layers (HTL) in two‐layer light‐emitting diodes ITO/HTL/Alq₃/Mg:Ag [ITO = indium tin oxide, and Alq₃ = tris(8‐quinolinato) aluminum]. The typical turn‐on voltage of these diodes was about 4–5 V. The maximum brightness of the device was about 3440 cd/m² at 20 V. The maximum efficiency was estimated to be 0.15 lm/W at 10 V. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1321–1333, 2002     

A (μ-hydrido)diborane(4) anion and its coordination chemistry with coinage metals

A tetra(o-tolyl) (μ-hydrido)diborane(4) anion 1, an analogue of [B₂H₅]⁻ species, was facilely prepared through the reaction of tetra(o-tolyl)diborane(4) with sodium hydride. Unlike common sp²–sp³ diborane species, 1 exhibited a σ-B–B bond nucleophilicity towards NHC-coordinated transition-metal (Cu, Ag, and Au) halides, resulting in the formation of η²-B–B bonded complexes 2 as confirmed by single-crystal X-ray analyses. Compared with 1, the structural data of 2 imply significant elongations of B–B bonds, following the order Au > Cu > Ag. DFT studies show that the diboron ligand interacts with the coinage metal through a three-center-two-electron B–M–B bonding mode. The fact that the B–B bond of the gold complex is much prolonged than the related Cu and Ag compounds might be ascribed to the superior electrophilicity of the gold atom.

A tetra(o-tolyl)(μ-hydrido)diborane(4) anion is facilely prepared via the reaction of tetra(o-tolyl)diborane(4) with NaH. It exhibits a σ-B–B bond nucleophilicity towards NHC-metal halides to give the corresponding η²-B–B bonded metal complexes.