A mixed‐valence complex of cobalt based on 3‐methoxysalicylaldoxime

A new tetranuclear mixed‐valence cobalt complex, namely di‐μ₂‐azido‐diazidodiethanolbis{μ₂‐2‐[(hydroxyimino)methyl]‐6‐methoxyphenolato}bis{μ₃‐6‐methoxy‐2‐[(oxidoimino)methyl]phenolato}dicobalt(II)dicobalt(III) ethanol disolvate, [Co^II₂Co^III₂(C₈H₇NO₃)₂(C₈H₈NO₃)₂(N₃)₄(C₂H₅OH)₂]·2C₂H₅OH, has been synthesized by the reaction of Co(OAc)₂·4H₂O (OAc is acetate) with 3‐methoxysalicylaldoxime (H₂mosao) in an ethanol solution. In the complex, the four Co cations all display distorted octahedral coordination environments and they are bridged by two κ²,κ¹,κ¹;μ₃‐mosao²⁻ ligands, two κ²,κ²;μ₂‐Hmosao⁻ ligands and two μ₂‐N₃⁻ anions to form a tetranuclear [Co₄N₄O₄] cluster. Adjacent clusters are connected through weak C—H...N and C—H...O interactions, resulting in a two‐dimensional supramolecular network parallel to the ac plane. The magnetic properties of the complex have also been studied.     

Prediction of the reduction potential of tris(2,2′‐bipyridinyl)iron(III/II) derivatives

The reduction potentials of a tris(2,2′‐bipyridinyl)iron (III/II) and iron(III/II) couples complexed with 2,2′‐bipyridinyl derivatives in acetonitrile are predicted using density functional theory. The calculation protocol proposed by Kim et al. (Kim, J. Park, Y. S. Lee, J. Comput. Chem. 2013, 34, 2233) showing reliable performance for the reduction potential is used. The four kinds of the functional groups, a methoxy group, a methyl group, a chlorine atom, and a cyanide group, are substituted at the ligands to examine the electronic effect on the reduction potential. Electron donating/withdrawing effect is analyzed by comparing the reduction potential having different substituents at the same position. The influence of the geometrical strain on the reduction potential is investigated. The good correlation between the experimental results and the calculated results is obtained. Not only the general trend, but also the detailed phenomena are correctly reproduced. The maximum deviation from the experimental value is 0.083 V for the methyl substitution at the position 4. The mean absolute error for the seven couples is 0.047 V. The difference of the reduction potential between the chlorine atom substituted at the positions 4 and 5, 0.1 V, is well described. The difference between the CN and the Cl substitution of 0.318 and 0.228 V for the position 4 and 5 is correctly obtained as 0.325 and 0.213 V, respectively. The simple linear relation between the lowest unoccupied molecular orbital (LUMO) energy of the Fe(III) complexes in solution and the calculated reduction potentials is obtained with the R² of 0.977. © 2014 Wiley Periodicals, Inc.     

A mixed‐valence chloride‐bridged (pincer)IrIII–(diene)IrI complex

The title compound, [2,6‐bis(di‐tert‐butylphosphino)phenyl‐1κ³P,C¹,P′]di‐μ‐chlorido‐1:2κ⁴Cl:Cl‐(2η⁴‐cycloocta‐2,5‐diene)hydrido‐1κH‐diiridium(I,III) hexane hemisolvate, [Ir₂(C₈H₁₂)(C₂₄H₄₃P₂)Cl₂H]·0.5C₆H₁₄ or [(^tBuPCP)IrH(μ₂‐Cl)₂Ir(COD)][^tBuPCP is κ³‐2,6‐(^tBu₂PCH₂)₂C₆H₃ and COD is η⁴‐2,5‐cyclooctadiene], is an Ir^III/Ir^I dimer bridged by two chloride ions. The Ir₂Cl₂ framework is nearly planar, with a dihedral angle of 13.04 (4)° between the two Ir centers. The compound was isolated as a hexane hemisolvate. A list of distances found in Ir(PCP) compounds is given.     

A mixed‐valence manganese(III)–manganese(IV) di‐μ‐oxo complex, [(cyclam)MnO]2(ClO4)2(NO3)

The title dinuclear di‐μ‐oxo‐bis­[(1,4,8,11‐tetra­aza­cyclo­tetra­decane‐κ⁴N)­manganese(III,IV)] diperchlorate nitrate complex, [Mn₂O₂(C₁₀H₂₄N₄)₂](ClO₄)₂(NO₃) or [(cyclam)Mn­O]₂(ClO₄)₂(NO₃), was self‐assembled by the reaction of Mn²⁺ with 1,4,8,11‐tetra­aza­cyclo­tetra­decane in aqueous media. The structure of this compound consists of a centrosymmetric binuclear [(cyclam)MnO]³⁺ unit, two perchlorate anions and one nitrate anion. While the low‐temperature electron paramagnetic resonance spectra show a typical 16‐line signal for a di‐μ‐oxo Mn^III/Mn^IV dimer, the magnetic susceptibility studies also confirm a characteristic antiferromagnetic coupling between the electronic spins of the Mn^IV and Mn^III ions.     

K6[Fe8.27(HPO3)12]: a new mixed‐valence iron phosphite

The title compound, hexapotassium octairon(II,III) dodecaphosphonate, exhibiting a two‐dimensional structure, is a new mixed alkali/3d metal phosphite. It crystallizes in the space group Rm, with two crystallographically independent Fe atoms occupying sites of m (Fe1) and 3m (Fe2) symmetry. The Fe2 site is fully occupied, whereas the Fe1 site presents an occupancy factor of 0.757 (3). The three independent O atoms, one of which is disordered, are situated on a mirror and all other atoms are located on special positions with 3m symmetry. Layers of formula [Fe₃(HPO₃)₄]²⁻ are observed in the structure, formed by linear Fe₃O₁₂ trimer units, which contain face‐sharing FeO₆ octahedra interconnected by (HPO₃)²⁻ phosphite oxoanions. The partial occupancy of the Fe1 site might be described by the formation of two [Fe(HPO₃)₂]⁻ layers derived from the [Fe₃(HPO₃)₄]²⁻ layer when the Fe1 atom is absent. Fe²⁺ is localized at the Fe1 and Fe2 sites of the [Fe₃(HPO₃)₄]²⁻ sheets, whereas Fe³⁺ is found at the Fe2 sites of the [Fe(HPO₃)₂]⁻ sheets, according to bond‐valence calculations. The K⁺ cations are located in the interlayer spaces, between the [Fe₃(HPO₃)₄]²⁻ layers, and between the [Fe₃(HPO₃)₄]²⁻ and [Fe(HPO₃)₂]⁻ layers.     

Broken symmetry density functional study of a mixed‐valence unsymmetrical dinuclear iron complex

Density functional theory (DFT) calculations with different exchange‐correlation functionals were performed for a mixed valence Fe(II)/Fe(III) binuclear complex with μ‐methoxo and two μ‐carboxylate bridging ligands, (1) with geometry optimizations being performed for all possible spin multiplicities (M_S = 2, 4, 6, 8, and 10). Within the exchange‐correlation functionals studied, only the hybrid GGA functionals B3P and B3LYP and also the pure GGA functional RPBE, predicts the geometry with high spin (S = 9/2) to be more stable than the geometry with low spin state (S = 1/2) by 20 kcal/mol, in agreement with the experimental findings. These functionals also predict the same stability order for the different spin states, being M_S = 10>8>6>2>4. The meta‐GGA functionals TPSS and TPSSh and also the pure GGA functionals BLYP and BP86 predict different stability orders. The computed average EPR g‐tensor, g_av, of 2.03, at the B3LYP level, is in good agreement with the experimental findings. Heisenberg exchange coupling constants, J, were calculated within the broken‐symmetry formalism, at the B3LYP level, showing that the two iron centers are antiferromagnetic coupling, with a very weak coupling constant of about ?7 cm^?1, in good agreement with the experimental value. Additionally, the effect of using different multiplicities of the reference geometries on the computed J value is discussed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Iron(III) diacetylmonoxime‐2‐hydrazinopyridine complex: A new prospective antitumor drug

Because of the side effects and drug resistance of cisplatin, a basic clinically approved chemotherapeutic drug, a new attempt is reported to develop a novel antitumor drug based on complexation of iron metal ion with organic moiety that may be effective and safer. A newly synthesized iron(III) diacetylmonoxime‐2‐hydrazinopyridine complex was tested firstly for its cytotoxicity and superoxide dismutase (SOD)‐mimic activity in vitro then for its antitumor activity against Ehrlich ascites carcinoma (EAC) and the related biochemical alterations in vivo in comparison with cisplatin. The complex showed 80.88% SOD‐mimic activity and IC₅₀ of 2.6 μg ml⁻¹. In EAC‐bearing mice, in a dose‐dependent manner, Fe(III) complex treatment exhibited significant hematological profile improvements, tumor volume, viable cell count and hepatic lipid peroxidation level decreases, life span extension, hepatic glutathione and total antioxidant capacity levels enhancements, hepatic SOD and catalase activities augmentations, liver function tests alterations attenuations, and hepatocyte nucleic acids content normalization. Thus, the Fe(III) diacetylmonoxime‐2‐hydrazinopyridine complex is a novel, promising, less toxic antitumor agent. Its killing of tumor cells may be via a reactive oxygen species scavenging mechanism.     

Aqua(nitrilo­triacetato)­(1,10‐phenanthroline)iron(III) monohydrate: a seven‐coordinate iron(III) complex

Reaction of 1,10‐phenanthroline (phen) with iron trichloride in the presence of sodium nitrilo­tri­acetate (NTA) resulted in the formation of red crystals of the title complex, [Fe(C₆H₆NO₆)(C₁₂H₈N₂)(H₂O)]·H₂O. The Fe atom has a distorted capped trigonal prismatic coordination comprised of one tetradentate NTA, one bidentate phen molecule and a water mol­ecule. Intermolecular O—H?O hydrogen bonds link the mol­ecules into infinite chains. The chains are crosslinked by hydrogen bonds involving the solvent water mol­ecule, leading to an infinite ladder packing mode.     

Polymorphism of dinitro[tris(2‐aminoethyl)amine]cobalt(III) chloride

Three polymorphs of bis(nitrito‐κN)[tris(2‐aminoethyl)amine‐κ⁴N,N′,N′′,N′′′]cobalt(III) chloride, [Co(NO₂)₂(C₆H₁₈N₄)]Cl, have been structurally characterized in the 100–300 K temperature range. Two orthorhombic polymorphs are related by a solid‐state enantiotropic order–disorder k2 phase transition at ca 152 K. The third, monoclinic, polymorph crystallizes as a nonmerohedral twin. In the structure of the high‐temperature (300 K) orthorhombic polymorph, the Co^III complex cation resides on a crystallographic mirror plane, whereas the Cl⁻ anion occupies a crystallographic twofold axis. In the unit cell of the monoclinic polymorph, the cationic Co^III complex is in a general position, whose charge is balanced by two halves of two Cl⁻ anions, each residing on a crystallographic twofold axis.     

A 1:2 complex of mercury(II) chloride with 1,3‐imidazole‐2‐thione

The Hg atom in the title monomeric complex, di­chloro­bis(3‐imidazolium‐2‐thiol­ato‐S)­mercury(II), [HgCl₂(C₃H₄N₂S)₂], is four‐coordinate having an irregular tetrahedral geometry composed of two Cl atoms [Hg—Cl 2.622 (2) and 2.663 (2) Å] and two thione S atoms [Hg—S 2.445 (2) and 2.462 (2) Å]. The monodentate thione ligand adopts a zwitterionic form and exists as the 3‐imidazolium‐2‐thiol­ate ion. The bond angle S1—Hg—S2 of 130.87 (8)° has the greatest deviation from ideal tetrahedral geometry. Intermolecular hydrogen bonds between two of the four N—H groups and one of the Cl atoms [3.232 (8) and 3.238 (7) Å] stabilize the crystal structure, while the other two N—H groups contribute through the formation of N—H?Cl intramolecular hydrogen bonds with the other Cl atom [3.121 (7) and 3.188 (7) Å].     

Effect of cosolvent on the volume of activation for base hydrolysis of tris(1.10‐phenanthroline)‐ and tris (2.2′‐bipyridine)iron(II) complexes

The kinetics of the base hydrolysis of Fe(phen)₃²⁺ and Fe(bipy)₃²⁺ (phen = 1,10‐phenanthroline and bipy = 2,2'‐bipyridine) in some aqueous alcohol mixtures at ambient and elevated pressures (up to 1kbar) have been monitored spectrophotometrically at 25.0°C. For a given pressure, the alcohol cosolvent increases the rate of reaction relative to the reaction in a wholly aqueous medium. In all cases, increasing pressure causes rate retardation and derived volumes of activation for the reactions in aqueous solvent mixtures vary between +15 and +25 cm³ mol⁻¹, indicating that solvation changes of a different magnitude occur upon reaching the transition state from those occurring for the reactions in aqueous medium. Since the reaction has been established earlier to be nucleophilic attack of the incoming hydroxide ion, the volumes of activation signify marked increases in the loss of electrostricted solvent from the vicinities of the hydroxide ion and the iron(II) complex ions. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 263–270, 2000     

A three‐dimensional net of Δ‐tris(1,10‐phenanthroline)ruthenium(II) in the dual‐metal self‐assembly of bis[tris(1,10‐phenanthroline)ruthenium(II)] tetraisothiocyanatoiron(II) bis(perchlorate)

The title compound, [Ru(C₁₂H₈N₂)₃]₂[Fe(NCS)₄](ClO₄)₂, crystallizes in a tetragonal chiral space group (P4₁2₁2) and the assigned absolute configuration of the optically active molecules was unequivocally confirmed. The Δ‐[Ru^II(phen)₃]²⁺ complex cations (phen is 1,10‐phenanthroline) interact along the 4₁ screw axis parallel to the c axis, with an Ru...Ru distance of 10.4170 (6) Å, and in the ab plane, with Ru...Ru distances of 10.0920 (6) and 10.0938 (6) Å, defining a primitive cubic lattice. The Fe atom is situated on the twofold axis diagonal in the ab plane. The supramolecular architecture is supported by C—H...O interactions between the [Ru^II(phen)₃]²⁺ cation and the disordered perchlorate anion. This study adds to the relatively scarce knowledge about intermolecular interactions between [Ru(phen)₃]²⁺ ions in the solid state, knowledge that eventually may also lead to a better understanding of the solution state interactions of this species; these are of immense interest because of the photochemical properties of these ions and their interactions with DNA.     

Low‐temperature tris(tert‐butyl 3‐oxo­butan­oato)­iron(III)

The low‐temperature (173 K) structure of the title complex, [Fe(C₈H₁₃O₃)₃], a metal–organic chemical vapour deposition (MOCVD) precursor, has been analyzed. The Fe atom is octahedrally coordinated and the three chelate rings are found to be significantly non‐planar, adopting a half‐chair conformation with the Fe atom out of the plane.     

A mixed‐valence chair‐like tetranuclear copper(I,II) cluster with three linking modes of the 3,5‐bis(2‐pyridyl)‐1,2,4‐triazole ligand

In the tetranuclear copper complex tetrakis[μ‐3,5‐bis(2‐pyridyl)‐1,2,4‐triazolido]bis[3,5‐bis(2‐pyridyl)‐1,2,4‐triazolido]dicopper(I)dicopper(II) dihydrate, [Cu^I₂Cu^II₂(C₁₂H₈N₅)₆]·2H₂O, the asymmetric unit is composed of one Cu^I center, one Cu^II center, three anionic 3,5‐bis(2‐pyridyl)‐1,2,4‐triazole (2‐BPT) ligands and one solvent water molecule. The Cu^I and Cu^II centers exhibit [Cu^IN₄] tetrahedral and [Cu^IIN₆] octahedral coordination environments, respectively. The three independent 2‐BPT ligands adopt different chelating modes, which link the copper centers to generate a chair‐like tetranuclear metallomacrocycle with metal–metal distances of about 4.4 × 6.2 Å disposed about a crystallographic inversion center. Furthermore, strong π–π stacking interactions and O—H...N hydrogen‐bonding systems link the tetracopper clusters into a two‐dimensional supramolecular network.     

A supramolecular cadmium(II) complex: (1,10‐phenanthroline)[tris(2‐amino­ethyl)­amine]­cadmium(II) dinitrate hydrate

Colourless prismatic crystals of the title compound, [Cd(tren)(phen)](NO₃)₂·H₂O [phen = 1,10‐phen­an­thro­line, C₁₂H₈N₂; tren = tris(2‐amino­ethyl)­amine, C₆H₁₈N₄], form from an aqueous solution of equivalent amounts of Cd(NO₃)₂, tren and phen. Infinite one‐dimensional polymeric zigzag motifs, constructed via alternating hydrogen‐bonding and π–π interactions, are further mediated by nitrate–amine hydrogen bonds to create three‐dimensional networks.     

Geometric isomers of chloro(6‐methyl‐1,4,8,11‐tetraazacyclotetradecane‐6‐amine)cobalt(III) tetrachlorozincate(II)

The crystal structures of a pair of cis and trans isomers of the macrocyclic chloro­penta­amine title complex, as their tetra­chloro­zincate(II) salts, [CoCl(C₁₁H₂₇N₅)][ZnCl₄], are re­ported. The two distinct isomeric forms lead to significant variations in the Co—N bond lengths and, furthermore, hydrogen bonding between the complex ions is influenced by the folded (cis) or planar (trans) conformations of the coordinated ligand.     

(2‐Methyl­quinolin‐8‐olato)­iron(III) and ‐copper(II) complexes

The crystal structures of tris(2‐methyl­quinolin‐8‐olato‐N,O)­iron(III), [Fe­(C₁₀­H₈­NO)₃], (I), and aqua­bis(2‐methyl­quinolin‐8‐olato‐N,O)­copper(II), [Cu­(C₁₀­H₈NO)₂­(H₂O)], (II), have been determined. Compound (I) has a distorted octahedral configuration, in which the central Fe atom is coordinated by three N atoms and three O atoms from three 2‐methylquinolin‐8‐olate ligands. The three Fe—O bond distances are in the range 1.934 (2)–1.947 (2) Å, while the three Fe—N bond distances range from 2.204 (2) to 2.405 (2) Å. In compound (II), the central Cu^II atom and H₂O group lie on the crystallographic twofold axis and the coordination geometry of the Cu^II atom is close to trigonal bipyramidal, with the three O atoms in the basal plane and the two N atoms in apical positions. The Cu—N bond length is 2.018 (5) Å. The Cu—O bond length in the basal positions is 1.991 (4) Å, while the Cu—O bond length in the apical position is 2.273 (6) Å. There is an intermolecular OW—H?O hydrogen bond which links the mol­ecules into a linear chain along the b axis.     

Poly[tetraamminecopper(II) bis[tris(μ2‐cyanido‐κ2C,N)dicuprate(I)]]: a unique CuI–CuII mixed‐valence complex containing anionic cuprous cyanide layers and [Cu(NH3)4]2+ cations

The title compound, {[Cu(NH₃)₄][Cu(CN)₃]₂}_n, features a Cu^I–Cu^II mixed‐valence CuCN framework based on {[Cu₂(CN)₃]⁻}_n anionic layers and [Cu(NH₃)₄]²⁺ cations. The asymmetric unit contains two different Cu^I ions and one Cu^II ion which lies on a centre of inversion. Each Cu^I ion is coordinated to three cyanide ligands with a distorted trigonal–planar geometry, while the Cu^II ion is ligated by four ammine ligands, with a distorted square‐planar coordination geometry. The interlinkage between Cu^I ions and cyanide bridges produces a honeycomb‐like {[Cu₂(CN)₃]⁻}_n anionic layer containing 18‐membered planar [Cu(CN)]₆ metallocycles. A [Cu(NH₃)₄]²⁺ cation fills each metallocyclic cavity within pairs of exactly superimposed {[Cu₂(CN)₃]⁻}_n anionic layers, but there are no cations between the layers of adjacent pairs, which are offset. Pairs of N—H...N hydrogen‐bonding interactions link the N—H groups of the ammine ligands to the N atoms of cyanide ligands.     

Cyclotrimerization of acetylene by the tris(acetylacetonato)titanium(III)–diethylaluminum chloride system

Reaction of acetylene with tris(acetylacetonato)titanium(III) and diethylaluminum chloride system leads to formation of benzene, a trace of ethylbenzene, and a small amount of polyacetylene. The isotopic composition of products obtained from cyclotrimerization of acetylene-d₂ and an equimolar mixture of acetylene and acetylene-d₂ is investigated to elucidate the mechanism of the cyclotrimerization. The results suggest a mechanism in which an acetylene inserts into the metal—ethyl bond formed by reaction of Ti(acac)₃ and Al(C₂H₅)₂Cl, followed by insertion of two acetylene molecules and elimination of a hydrogen atom from the first inserted acetylene to yield an ethylbenzene and a metal hydride intermediate. The metal hydride intermediate catalyzes acetylene cyclotrimerization to give benzene. During the reaction, the hydrogen atom in the metal hydride intermediate does not exchange with the hydrogen atom in the inserted acetylene molecules.     

5‐n‐Butylpyridine‐2‐carboxylate–copper(II) and –iron(III) complexes

In trans‐bis(5‐n‐butyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­bis­(methanol‐κO)copper(II), [Cu(C₁₀H₁₂NO₂)₂(CH₄O)₂], the Cu atom lies on a centre of symmetry and has a distorted octahedral coordination. The Cu—O(methanol) bond length in the axial direction is 2.596 (3) Å, which is much longer than the Cu—­O(carboxylate) and Cu—N distances in the equatorial plane [1.952 (2) and 1.977 (2) Å, respectively]. In mer‐tris(5‐n‐bu­tyl­pyridine‐2‐carboxyl­ato‐κ²N,O)­iron(III), [Fe(C₁₀H₁₂NO₂)₃], the Fe atom also has a distorted octahedral geometry, with Fe—O and Fe—N bond‐length ranges of 1.949 (4)–1.970 (4) and 2.116 (5)–2.161 (5) Å, respectively. Both crystals are stabilized by stacking interactions of the 5‐n‐butyl­pyridine‐2‐carboxyl­ate ligand, although hydrogen bonds also contribute to the stabilization of the copper(II) complex.