5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

μ3‐η2:η2:η2‐Coordination of Primary Silane on a Triruthenium Plane

A μ₃‐η²:η²:η²‐silane complex, [(Cp*Ru)₃(μ₃‐η²:η²:η²‐H₃SitBu)(μ‐H)₃] ( 2 a ; Cp*=η⁵‐C₅Me₅), was synthesized from the reaction of [{Cp*Ru(μ‐H)}₃(μ₃‐H)₂] ( 1 ) with tBuSiH₃. Complex 2 a is the first example of a silane ligand adopting a μ₃‐η²:η²:η² coordination mode. This unprecedented coordination mode was established by NMR and IR spectroscopy as well as X‐ray diffraction analysis and supported by a density functional study. Variable‐temperature NMR analysis implied that 2 a equilibrates with a tautomeric μ₃‐silyl complex ( 3 a ). Although 3 a was not isolated, the corresponding μ₃‐silyl complex, [(Cp*Ru)₃(μ₃‐η²:η²‐H₂SiPh)(H)(μ‐H)₃] ( 3 b ), was obtained from the reaction of 1 with PhSiH₃. Treatment of 2 a with PhSiH₃ resulted in a silane exchange reaction, leading to the formation of 3 b accompanied by the elimination of tBuSiH₃. This result indicates that the μ₃‐silane complex can be regarded as an “arrested” intermediate for the oxidative addition/reductive elimination of a primary silane to a trinuclear site.     

Continuous Dehydrogenation of n‐Pentanol over a Cr Modified Cu/γ‐Al2O3‐La2O3 Catalyst

The oxidant‐free dehydrogenation of n‐pentanol over copper based catalysts was investigated in this paper. The effect of metal modification on the activity and stability of the copper catalyst supported on γ‐Al₂O₃ and La₂O₃ (Cu/γ‐Al₂O₃‐La₂O₃) was clarified and a Cr modified Cu/Al₂O₃‐La₂O₃ (Cu‐Cr/γ‐Al₂O₃‐La₂O₃) showed the best catalytic performance. The conversion of n‐pentanol was 70.0% and the selectivity for n‐pentanal increased to 97.1% over Cu‐Cr/γ‐Al₂O₃‐La₂O₃. X‐ray diffraction and temperature programmed reduction of H₂ indicated that the addition of Cr favors the formation and reduction of the copper oxide, and the dispersion of the active Cu⁰ species, accounting for the good activity and stability of this catalyst. Furthermore, the lower amount of acidic sites in Cu‐Cr/γ‐Al₂O₃‐La₂O₃ is suggested to suppress the dehydration in oxidant‐free dehydrogenation of n‐pentanol, accounting for the higher selectivity for n‐pentanal.     

β‐CdC2O4

Crystals of an­hydrous cadmium oxalate, β‐[Cd(C₂O₄)], have been synthesized hydro­thermally and the crystal structure solved using single‐crystal X‐ray diffraction data. The Cd and oxalate ions lie about independent inversion centres. The structure consists of a three‐dimensional framework built from sheets of cadmium octahedra linked together by oxalate groups.     

Lanthanoid‐Peroxo‐Komplexe mit μ3‐η2:η2:η2‐(O22—)‐Koordination. Die Kristallstrukturen von [Ln4(O2)2Cl8(Py)10] · Py mit Ln = Sm,Eu, Gd

Lanthanoid Peroxo Complexes with μ₃‐η²:η²:η²‐(O₂^2—) Coordination. Crystal Structures of [Ln₄(O₂)₂Cl₈(Py)₁₀] · Py mit Ln = Sm, Eu, Gd The four‐nuclear peroxo complexes [Ln₄(O₂)₂Cl₈(Py)₁₀]·py (py = pyridine) with Ln = Sm ( 1 ·py), Eu ( 2 ·py) und Gd ( 3 ·py) are formed as pale yellow ( 1 ·py) and colourless ( 2 ·py and 3 ·py) crystals by action of atmospheric oxygen on heated solutions of the anhydrous trichlorides LnCl₃ in pyridine/ diacetone alcohol (4‐hydroxy‐4‐methyl‐2‐pentanone). According to the X‐ray structural analyses the three complexes crystallize isostructural in the triclinic space group PP1¯ with two formula units per unit cell. 1—3 form centrosymmetrical molecular structures, in which the four lanthanoid atoms in coplanar array are linked via the two peroxo groups in a hitherto unobserved μ₃‐η²:η²:η² coordination. Additionally, they are bonded by four �μchloro bridges. Two of the Ln atoms complete their coordination sphere by three pyridine molecules each, the other two by two chlorine atoms and two pyridine molecules. The gadolinium compound is additionally characterized by its complete vibrational spectrum (i.r. and Raman).     

6β‐Azido‐7α‐hydroxy‐17‐oxo‐5α‐androstan‐3β‐yl acetate

In the title compound, C₂₁H₃₁N₃O₄, a potential inhibitor of aromatase, all rings are fused trans. Rings A, B and C have chair conformations which are slightly flattened. Ring D has a 14α‐envelope conformation. The steroid nucleus has a small twist, as shown by the C19—C10⋯C13—C18 torsion angle of 6.6 (2)°. Ab initio calculations of the equilibrium geometry of the mol­ecule reproduce this small twist, which appears to be due to the steric effect of the 6β‐azide substituent rather than to packing effects.     

21α‐Fluoro‐7‐norvouacapane‐17β,21α‐lactone

The crystal structure of 21α‐fluoro‐7‐norvouacapane‐17β,21α‐lactone, C₂₀H₂₅FO₃, a new synthetic derivative of the diterpenoid 6α,7β‐di­hydroxy­vouacapan‐17β‐oic acid isolated from Pterodon polygalaeflorus Benth fruits, is described.     

Interface structure and misfit relaxation in YBa2Cu3O7‐δ/PrBa2Cu3O7‐δ heterostructures on SrTiO3(001) substrates

Structural properties of YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterointerfaces have been investigated by aberration‐corrected electron microscopy. Experimental evidence shows that c‐axis‐oriented YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterostructures with atomically sharp interface epitaxially grow on SrTiO₃(001) substrates. In terms of the contrast analysis, no apparent interdiffusion between YBa₂Cu₃O_7‐δ and PrBa₂Cu₃O_7‐δ occurs at the interface. In addition, stand‐off misfit dislocations and planar faults appear within PrBa₂Cu₃O_7‐δ layer near the interface. Both misfit dislocations and interfacial dislocations resulting from the termination of planar faults contribute to misfit relaxation at the YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ interface. The defect configuration of planar faults and stand‐off misfit dislocations is explored. Copyright © 2013 John Wiley & Sons, Ltd.     

β‐Y2Si2O7, a new thortveitite‐type compound,determined at 100 and 280 K

A new form of Y₂Si₂O₇ (diyttrium heptaoxodisilicate) has been synthesized which is isotypic with thortveitite, Sc₂Si₂O₇, and crystallizes in the centrosymmetric space group C2/m, both at 100 and 280 K. The Y³⁺ cation occupies a distorted octahedral site, with Y—O bond lengths in the range 2.239 (2)–2.309 (2) Å. The SiO₄ tetrahedron is remarkably regular, with Si—O bond lengths in the range 1.619 (2)–1.630 (2) Å. The bridging O atom of the Si₂O₇ pyrosilicate group shows a large anisotropic displacement perpendicular to the Si—O bond. Changes in lattice and structural parameters upon cooling are small with, however, a distinct decrease of the anisotropic displacement of the briding O atom. Structure solution and refinement in the non‐centrosymmetric space group C2 are possible but do not yield a significantly different structure model. The Si—O—Si bond angle of the isolated Si₂O₇ groups is 179.2 (1)° at 280 K in C2 and 180° per symmetry in C2/m. The C2/m structure model is favoured.     

13‐cis‐β,β‐Carotene and 15‐cis‐β,β‐carotene

13‐cis‐β,β‐Carotene, C₄₀H₅₆, crystallizes with a complete molecule in the asymmetric unit, whereas 15‐cis‐β,β‐carotene, also C₄₀H₅₆, has twofold symmetry about an axis through the central bond of the polyene chain. The polyene methyl groups are arranged on one side of the polyene chains for each molecule and the 6‐s‐cisβ end groups, with the cyclohexene rings in half‐chair conformations, are twisted out of the planes of the polyene chains by angles ranging from 41.37 (17) to 52.2 (4)°. The molecules in each structure pack so that the arms of one occupy the cleft of the next, and there is significant π–π stacking of the almost‐parallel polyene chains of the 15‐cis isomer, which approach at distances of 3.319 (1)–3.591 (1) Å.     

3β,7α,12α‐Tri­formyl­oxy‐24‐nor‐5β‐chol‐22‐ene

The title compound, alternatively called 24‐nor‐5β‐chol‐22‐ene‐3β,7α,12α‐triyl triformate, C₂₆H₃₈O₆, has a cis junction between two of the six‐membered rings. All three of the six‐membered rings have chair conformations that are slightly flattened and the five‐membered ring has a 13β,14α‐half‐chair conformation. The 3β, 7α and 12α ring substituents are axial and the 17β group is equatorial. The 3β‐formyl­oxy group is involved in one weak intermol­ecular C—H⋯O bond, which links the mol­ecules into dimers in a head‐to‐head fashion.     

5β,6β‐Epoxy‐17‐oxoandrostan‐3β‐yl acetate and 5β,6β‐epoxy‐20‐oxopregnan‐3β‐yl acetate

In the title compounds, C₂₁H₃₀O₄, (I), and C₂₃H₃₄O₄, (II), respectively, which are valuable intermediates in the synthesis of important steroid derivatives, rings A and B are cis‐(5β,10β)‐fused. The two molecules have similar conformations of rings A, B and C. The presence of the 5β,6β‐epoxide group induces a significant twist of the steroid nucleus and a strong flattening of the B ring. The different C17 substituents result in different conformations for ring D. Cohesion of the molecular packing is achieved in both compounds only by weak intermolecular interactions. The geometries of the molecules in the crystalline environment are compared with those of the free molecules as given by ab initio Roothan Hartree–Fock calculations. We show in this work that quantum mechanical ab initio methods reproduce well the details of the conformation of these molecules, including a large twist of the steroid nucleus. The calculated twist values are comparable, but are larger than the observed values, indicating a possible small effect of the crystal packing on the twist angles.     

Preparation of Protected β2‐ and β3‐Homocysteine, β2‐ and β3‐Homohistidine,and β2‐Homoserine for Solid‐Phase Syntheses

The Ser, Cys, and His side chains play decisive roles in the syntheses, structures, and functions of proteins and enzymes. For our structural and biomedical investigations of β‐peptides consisting of amino acids with proteinogenic side chains, we needed to have reliable preparative access to the title compounds. The two β³‐homoamino acid derivatives were obtained by Arndt–Eistert methodology from Boc‐His(Ts)‐OH and Fmoc‐Cys(PMB)‐OH (Schemes 2–4), with the side‐chain functional groups' reactivities requiring special precautions. The β²‐homoamino acids were prepared with the help of the chiral oxazolidinone auxiliary DIOZ by diastereoselective aldol additions of suitable Ti‐enolates to formaldehyde (generated in situ from trioxane) and subsequent functional‐group manipulations. These include OH→O^tBu etherification (for β²hSer; Schemes 5 and 6), OH→STrt replacement (for β²hCys; Scheme 7), and CH₂OH→CH₂N₃→CH₂NH₂ transformations (for β²hHis; Schemes 9–11). Including protection/deprotection/re‐protection reactions, it takes up to ten steps to obtain the enantiomerically pure target compounds from commercial precursors. Unsuccessful approaches, pitfalls, and optimization procedures are also discussed. The final products and the intermediate compounds are fully characterized by retention times (t_R), melting points, optical rotations, HPLC on chiral columns, IR, ¹H‐ and ¹³C‐NMR spectroscopy, mass spectrometry, elemental analyses, and (in some cases) by X‐ray crystal‐structure analysis.     

Trapping of Tricarbonyl(η1,η2‐homoallyl)iron and Tricarbonyl(η3‐allyl)iron Anion Intermediates with 2‐(Phenylsulfonyl)‐3‐phenyloxaziridine

The addition of reactive carbanions to (η⁴‐1,3‐diene)Fe(CO)₃ complexes at ?78 °C and 25 °C produced putative homoallyl and allyl anion complexes, respectively. Reaction of the reactive intermediates with 2‐(phenylsulfonyl)‐3‐phenyloxaziridine afforded nucleophilic substituted (η⁴‐1,3‐diene)Fe(CO)₃ complexes.     

Reactivity of η-, γ-, and α-Al2O3 for ZnAl2O4 Formation

The rate of ZnAl₂O₄ formation was measured for η-, γ-; and α- Al₂O₃ in order to distinguish the reactivity of them. The reactivity decreased as follows: η- > γ- > α-Al₂O₃. The reaction rate fitted to Jander's equation and the activation energies calculated were 33, 47 and 113 Kcal/mol for η-, γ- and α-Al₂O₃ systems, respectively. These differences are explained by an assumption that η- and γ-Al₂O₃ resulted in a ZnAl₂O₄ with imperfect spinel structure, but α-Al₂O₃ gave the perfect spinel structure. This assumption is based on the theoretical consideration of the activation energy needed for the diffusion-controlled reaction and date of lattice constant of each ZnAl₂O₄ obtained from three aluminas. The fact that η-Al₂O₃ shows very high reactivity compared with that of γ-Al₂O₃ was found to be explained on the basis of Jander's equation, a comparison of specific surface area and the defect structures of the aluminas.