1,1′‐Di­acetyl‐3‐hydroxy‐2,2′,3,3′‐tetra­hydro‐3,3′‐bi(1H‐indole)‐2,2′‐dione

In the title compound, C₂₀H₁₆N₂O₅, both of the 1‐acetyl­isatin (1‐acetyl‐1H‐indole‐2,3‐dione) moieties are planar and form a dihedral angle of 74.1 (1)°. Weak intermolecular hydrogen bonds and C—H?π interactions stabilize the packing in the crystal.     

3,3′‐Dimethyl‐1,1′‐methyl­ene­di­imid­azolium tetrachloro­cobaltate(II)

The title compound, (C₉H₁₄N₄)[CoCl₄], a methyl­ene‐bridged bis‐imidazolium salt containing a tetrachloro­cobaltate anion, is one of the first examples where an alkyl‐bridged bis‐imidazolium compound could be structurally characterized. Short C—H·Cl contacts between the imidazolium C—H bonds and the Cl atoms of the counter‐anion build up a three‐dimensional network and indicate that the C—H bonds are strongly polarized.     

Copolymers of Intrinsic Microporosity Based on 2,2′,3,3′‐Tetrahydroxy‐1,1′‐dinaphthyl

A series of new copolymers with high molecular weight and low polydispersity, prepared from tetrahydroxydinaphthyl, tetrahydroxyspirobisindane, and tetrafluoroterephthalonitrile monomers, prevent efficient space packing of the stiff polymer chains and consequently show intrinsic microporosity. One copolymer, DNPIM‐33, has an excellent combination of properties with good film‐forming characteristics and gas transport performance, and exhibits higher selectivity than the corresponding spirobisindane‐based homopolymer PIM‐1 for gas pairs, such as O₂/N₂, with a corresponding small decrease in permeability. This work demonstrates that significant improvements in properties may be obtained through development of copolymers with intrinsic microporosity (CoPIMs) that extends the spectrum of high‐molecular‐weight ladder structures of poly(dibenzodioxane)s.

     

3,3′‐Dinitro‐2,2′‐dithiodipyridine

In the title compound, C₁₀H₆N₄O₄S₂, (I), the molecule has a centre of inversion. The structure is a positional isomer of 5,5′‐dinitro‐2,2′‐dithiodipyridine [Brito, Mundaca, Cárdenas, López‐Rodríguez & Vargas (2007). Acta Cryst. E 63 , o3351–o3352], (II). The 3‐nitropyridine fragment of (I) shows excellent agreement with the bonding geometries of (II). The most obvious differences between them are in the S—S bond length [2.1167 (12) Å in (I) and 2.0719 (11) Å in (II)], and in the C—C_ipso—N_ring [119.8 (2)° in (I) and 123.9 (3)° in (II)] and S—C—C [122.62 (18)° in (I) and 116.0 (2)° in (II)] angles. The crystal structure of (I) has an intramolecular C—H...O interaction, with an H...O distance of 2.40 (3) Å, whereas this kind of interaction is not evident in (II). The molecules of (I) are linked into centrosymmetric R⁴₄(30) motifs by a C—H...O interaction. There are no aromatic π–π stacking and no C—H...π(arene) interactions. Compound (I) can be used as a nucleophilic tecton in self‐assembly reactions with metal centres of varying lability.     

Regio‐ and Stereocontrolled Synthesis of (2R*,3R*,4R*)‐3,4‐Dichloro‐1,2,3,4,5,8‐hexahydronaphthalen‐2‐yl Acetate via Tandem SN2′ Reactions

The hydroperoxy endoperoxide 3 , obtained by photooxygenation of isotetralin (= 1,4,5,8‐tetrahydronaphthalene; 1 ), was reduced with thiourea, and the resulting intermediate 4 was converted, after acetylation with acetyl chloride, to the interesting, double‐chlorinated acetate 5 in an unprecedented tandem reaction (Scheme 1). The structures and relative configurations of 3 and 5 were determined by NMR spectroscopy and by single‐crystal X‐ray‐diffraction analyses (Figs. 1 and 2, resp.). A mechanistic rationalization for the conversion of 4 to 5 is proposed (Scheme 2).     

Synthesis of the Macrocyclic Spermidine Alkaloid (±)‐(2R*,3R*)‐3‐Hydroxycelacinnine

The macrocyclic lactam alkaloid (±)‐(2R*,3R*)‐3‐hydroxycelacinnine ( 1 ) derived from spermidine was synthesized via stereoselective epoxide‐ring opening with magnesium azide and cesium carbonate promoted macrocyclization of the ditosylated diamino precursor 12 with 1,4‐dibromobutane in the two key steps (Scheme 2). ¹H‐ and ¹³C‐NMR Signal assignments from COSY, HSQC, and HMBC 2D NMR data of the synthesized 1 were compared with the earlier‐described data of the natural 3‐hydroxycelacinnine. The similarity of their ¹³C‐NMR spectra point to the correctness of the proposed constitutional formula for natural 3‐hydroxycelacinnine; however, different ¹H‐NMR chemical shifts and coupling constants (J(2,3)=9.0 vs. 1.2 Hz, resp.) in the α‐hydroxy‐β‐amino lactam moiety suggest that natural 3‐hydroxycelacinnine is the 2,3‐cis‐epimer of one synthetic (±)‐ 1 .     

Oxydative Aryl-Aryl-Verknüpfung von 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisochinolin-Derivaten

Oxidative Aryl-Aryl-Coupling of 6,6′,7,7′-Tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-biisoquinoline Derivatives We describe the synthesis of 2 by intramolecular oxidative coupling of 1, 1′-biisoquinoline derivatives 1 (Scheme 1). This heterocyclic system can be considered as a union of two apomorphine molecules and may thus exhibit dopaminergic activity. - The readily available tetrahydrobiisoquinoline 6 was methylated to 11 (Scheme 4) and reduced (with NaBH₃CN) to rac- 7 and (catalytically) to meso- 7 (Scheme 3). Reduction of 11 with NaBH₄ and of the biurethane rac- 9 with LiAlH₄/AlCl₃ afforded meso- and rac- 10 , respectively (Scheme 4). Demethylation of 6 , meso- 10 , meso- and rac- 7 led to 12 , meso- 14 , meso- and rac- 13 , respectively (Scheme 5). The latter two phenols were converted with chloroformic ester to the hexaethoxycarbonyl derivatives meso- and rac- 15 and subsequently saponified to the biurethanes meso- and rac- 16 , respectively (Scheme 5). - In order to assure proximity of the two aromatic rings, the ethano-bridged derivatives meso- and rac- 18 were prepared by condensing meso- and rac- 7 with oxalic ester and reducing the oxalyl derivatives meso- and rac- 17 with LiAlH₄/AlCl₃, respectively (Scheme 6). The ¹H-NMR, spectra at different temperatures showed that rac- 18 populated two conformers but rac- 17 only one, all with C₂-symmetry, and that meso- 17 as well as meso- 18 populated two enantiomeric conformers with C₁-symmetry. Whereas both oxalyl derivatives 17 were fairly rigid due to the two amide groupings, the ethano derivatives 18 exhibited coalescence temperatures of -20 and 30°. - The intramolecular coupling of the two aromatic rings was successful under ‘non-phenolic oxidative’ conditions with the tetramethoxy derivatives 7, 10 and 18 , the rac-isomers leading to the desired dibenzophenanthrolines, the meso-isomers, however, mostly to dienones (Scheme 9): With VOF₃ and FSO₃H in CF₃COOH/CH₂Cl₂ rac- 7 was converted to rac- 19 , rac- 18 to rac- 21 and rac- 10 to a mixture of rac- 20 and the dienone 23b of the morphinane type. Under the same conditions meso- 10 was transformed to the dienone 23a of the morphinane type, whereas meso- 18 yielded the dienone 24 of the neospirine type, both in lower yields. The analysis of the spectral data of the six coupling products offers evidence for their structures. With the demethylation of rac- 20 and rac- 21 to rac- 25 and rac- 26 , respectively, the synthetic goal of the work was reached, but only in the rac-series (Scheme 10). - In the course of this work two cleavages of octahydro-1,1′-biisoquinolines at the C(1), C(1′)-bond were observed: (1) The biurethanes 9 and 16 in both the meso- and rac-series reacted with oxygen in CF₃COOH solution to give the 3,4-dihydroisoquinolinium salts 27 and 28 ; the latter was deprotonated to the quinomethide 30 (Scheme 11). (2) Under the Clarke-Eschweiler reductive-methylation conditions meso- and rac- 7 were cleaved to the tetrahydroisoquinoline derivative 32 .     

Tautomerism in 2,2′-bipyridyl-3,3′-diol

Three stable tautomeric forms, dienol (DE), ketoenol (KE), and diketo (DK), of 2,2′-bipyridyl-3,3′-diol BP(OH)₂ were found in this study, using the semiempirical AM1 and MNDO-PM3 and ab initio (4-31G basis set) methods. All calculations were carried out without any symmetry restrictions. There is a good agreement between the ab initio calculated and experimentally obtained structural parameters for the DE tautomer. Transition structures, corresponding to the DK → KE and KE → DE processes have also been found. On the basis of the results from the present work, an asynchronous (two-step) DK → KE → DE mechanism of the IPT reaction in BP(OH)₂ is proposed. © 1996 John Wiley & Sons, Inc.     

Rheological behavior and microstructure of 2,2′‐dioxy‐ 1,1′‐binaphthylphosphazene R/S random copolymer

Solutions of a binaphthoxy phosphazene copolymer (containing chiral 2,2′‐dioxy‐1,1′‐binaphthyl units with 50% R and S configurations distributed along the chains) in N‐methyl pyrrolidone were studied by means of continuous flow experiments and small amplitude oscillatory flow tests. A sudden viscosity decrease was observed in the polymer concentration range (39–40 wt %), evidencing a liquid‐crystalline polymer behavior. This has been confirmed by other rheological methods which have demonstrated that, for a sufficiently high concentration, the solutions of the binaphthoxy phosphazene copolymer give rise to a lyotropic system with formation of rigid rods (axial ratio of 10) stacked parallel to each other. The lyotropic properties of our binaphthoxy phosphazene copolymer are compatible with a regular helical structure, similar to that found for a homoleptic binaphthoxy phosphazene, which contains only S configuration. This suggests that the chains of 50% R/S binaphthoxy phosphazene copolymer are, in average, close to the strictly alternating R‐S copolymeric structure of the syndiotactic isomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Synthesis and Properties of Sodium and Europium(III) Cryptates Incorporating the 2,2′-Bipyridine 1,1′-Dioxide and 3,3′-Biisoquinoline 2,2′-Dioxide Units

The sodium and europium cryptates of the new macrobicyclic ligands 2 and 3 incorporating the 2,2′-bipyri dine 1,1′-dioxide and 3,3′-biisoquinoline 2,2′-dioxide units, respectively, have been prepared. The Eu^III complexes present characteristic ¹H-NMR spectra, showing large shifts, and are strongly luminescent in aqueous solution. These markedly improved luminescent properties, compared to the europium cryptate of the parent macrobicyclic ligand 1 , may be ascribed at least in part to a better shielding of the bound cation by the N-oxide sites.     

1,1′‐Di(hydrazinocarbonylmethyl)‐2,2′‐biimidazole monohydrate and 1,1′‐di[2‐(hydrazinocarbonyl)ethyl]‐2,2′‐bi­imidazole

The crystal structures of the title compounds, alternatively called 2,2′‐(2,2′‐bi­imid­azole‐1,1′‐diyl)­diaceto­hydra­zide monohydrate, C₁₀H₁₄N₈O₂·H₂O, (I), and 3,3′‐(2,2′‐bi­imid­azole‐1,1′‐diyl)­dipropion­o­hydra­zide, C₁₂H₁₈N₈O₂, (II), respectively, have been determined. The mol­ecules consist of half‐mol­ecule asymmetric units related by a twofold rotation in (I) and by a center of inversion in (II). The imidazole rings of both mol­ecules crystallize in a nearly coplanar fashion [dihedral angles of 5.91 (3) and 0.0 (1)° for (I) and (II), respectively]. Both planar hy­dra­zinocarbonylalkyl substituents are essentially planar and assume the E orientation.     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

Atropselective Dibrominations of a 1,1′‐Disubstituted 2,2′‐Biindolyl with Diverging Point‐to‐Axial Asymmetric Inductions. Deriving 2,2′‐Biindolyl‐3,3′‐diphosphane Ligands for Asymmetric Catalysis

On the ¹H NMR timescale, 2,2′‐biindolyls with (R)‐configured (1‐alkoxyprop)‐2‐yl, (1‐hydroxyprop)‐2‐yl, or (1‐siloxyprop)‐2‐yl substituents at C‐1 and C‐1′ are atropisomerically stable at <0 °C and interconvert at >30 °C. A 2,2′‐biindolyl (R,R)‐ 17 a of that kind and achiral (!) brominating reagents gave the atropisomerically stable 3,3′‐dibromobiindolyls (M)‐ and/or (P)‐ 18 a at best atropselectively—because of point‐to‐axial asymmetric inductions—and atropdivergently, exhibiting up to 95 % (M)‐ and as much (P)‐atropselectivity. This route to atropisomerically pure biaryls is novel and should extend to other substrates and/or different functionalizations. The dibromobiindolyls (M)‐ and (P)‐ 18 a furnished the biindolyldiphosphanes (M)‐ and (P)‐ 14 without atropisomerization. These syntheses did not require the resolution of a racemic mixture, which distinguishes them from virtually all biaryldiphosphane syntheses known to date. (M)‐ and (P)‐ 14 acted as ligands in catalytic asymmetric allylations and hydrogenations. Remarkably, the β‐ketoester rac‐ 25 c was hydrogenated trans‐selectively with 98 % ee; this included a dynamic kinetic resolution.     

(R)‐(+)‐2,2′‐Bis­(di­phenyl­phosphinoyl)‐1,1′‐bi­naphthyl

The title compound, BINAP oxide, C₄₄H₃₂O₂P₂, (I), was synthesized by direct oxidation of (R)‐(+)‐2,2′‐bis­(di­phenyl­phosphino)‐1,1′‐bi­naphthyl (BINAP) with tert‐butyl hydro­peroxide in toluene solution. The angle between the naphthyl planes of the bi­naphthyl group is 94.17 (3)°.     

(3R*,4R*)‐3‐Iso­propyl‐4‐phenyl­azetidin‐2‐one at 150 K

The title compound, C₁₂H₁₅NO, crystallized in the centrosymmetric space group C2/c with one mol­ecule as the asymmetric unit. There is a single conventional N—H?O hydrogen bond, with a donor–acceptor distance of 2.912 (1) Å, which forms an R(8) cyclic dimer about a center of symmetry. There is a single significant intermolecular C—H?O interaction, which also forms an R(8) cyclic dimer about a center of symmetry. Taken together, these interactions form chains propagating along [110]. Structural comparisons are made with another β‐­lactam, (1′R*,3R*,4S*)‐3‐(1′‐hydroxy­ethyl)‐4‐phenylazet­id­in‐2‐one.     

基于(R)-1,1’-联萘硫脲的手性荧光受体: 合成与手性识别

Two chiral fluorescent receptors 1 and 2 based on (R)-1,1‘-binaphthylene-2,2‘-bisthiourea were synthesized, and their chiral recognition properties for enantiomeric mandelate anions were studied by fluorescence spectra and molecular modeling. Addition of the L- and D-mandelate anions caused considerable fluorescent increases in the fluorescent intensity of the host solution. The L-enantiomer can enhance the fluorescence intensity of 1 much more than the D-enantiomer can do, and 1 shows a better enantioselective recognition ability than 2.