利用氧化辅助气固法生长高磁性的α-Fe2O3和Fe3O4纳米线

探讨生长α-Fe₂O₃和Fe₃O₄纳米线的一个可控制的合成过程. 在研究中发现,高磁性的α-Fe₂O₃纳米线已经成功地利用氧化辅助气固法结晶生成于Fe_0.5Ni_0.5合金基板上;若基板事先浸泡于草酸溶液中,随草酸浓度的增加,所生长的纳米线晶相会逐转变为Fe₃O₄,当草酸浓度达到0.75 mol/L时,所生长的纳米线几乎全部转变成Fe₃O₄晶相. 此外,实验结果也显示所生长的纳米线长度及直径会随着气固过程中的温度上升而增加,生长密度则会随着气固过程中的流量加大而上升. 此过程所提出的合成程序可在2 h內完成.     

钴改性Fe3O4-MnO2催化转化生物质合成气制备液体燃料

本文制备了用于费托合成反应的钴改性Fe₃O₄-MnO₂双功能催化剂,并探究了钴负载量对Fe-Co协同效应的影响以及Fe₁Co_xMn₁催化剂的费托合成反应性能. 实验发现,在Fe₃O₄-Mn催化剂中加入Co可促进铁氧化物的还原、增加反应过程中铁位点的活性. 此外,Co的加入可增强Fe-Co金属间的电子转移,加强两者的协同作用,提高催化性能. Co负载较高的Fe₁Co_xMn₁催化剂可进一步促进加氢反应能力,使产品分布向短链烃方向转移. 在280 ^°C、2.0 MPa和3000 h^-1的最佳工况条件下,Fe₁Co₁Mn₁催化剂的液体燃料收率最高.     

第2系列ZrO2(Y2O3)薄膜的慢正电子研究

用慢正电子技术研究了在溅射时不加偏压,衬底加热300℃,纯Ar气氛下制备的用Y_{2O3稳定的ZrO2薄膜材料(简称YSZ薄膜),发现了YSZ薄膜在不同 深度处的缺陷分布情况,退火温度对YSZ薄膜缺陷有影响.简要讨论了致密、优质YSZ薄膜的 制备方法.}     

Fe_3O_4@[Cu_3(btc)_2]磁性分散微固相萃取-液相色谱串联质谱法测定水样中四环素类抗生素残留（英文）

本文合成了磁性金属有机骨架材料Fe_3O_4@[Cu_3(btc)_2],并作为分散微固相萃取的吸附剂用于四环素类抗生素的富集.对萃取的条件,包括萃取时间、溶液pH和洗脱溶剂对四环素类抗生素萃取效率的影响进行了研究.结果显示Fe_3O_4@[Cu_3(btc)_2]可以有效富集四环素类抗生素,而四环素类抗生素与Fe_3O_4@[Cu_3(btc)_2]之间的静电相互作用主导了这一过程.利用分散微固相萃取结合液相色谱-串联质谱法对天然水中的四种四环素类抗生素(土霉素,四环素,金霉素和多西环素)残留进行了测定.四种抗生素的检出限(S/N=3)为0.01～0.02μg/L,定量限(S/N=10)为0.04～0.07μg/L.河水和养殖水中四环素三个水平的加标回收率为70.3%～96.5%,相对标准偏差为3.8%～12.8%.结果表明,基于磁性金属有机骨架材料的分散微固相萃取可以从水中简单、快速、高效地富集四环素类抗生素.     

有机金属化学气相沉积法制备的Ni/Al2O3纳米复合材料的氢吸附

研究了通过有机金属化学气相沉积技术及单源分子前躯体方法制备的Ni/Al₂O₃纳米复合材料的氢吸附(存储). 在冷壁的有机金属化学气相沉积反应器中,通过降解Ni(acac)₂粉末基底上的[H₂Al(OtBu)]₂制备的Ni/Al₂O₃纳米复合材料. 通过X射线粉末衍射、扫描电镜、透射电镜以及能量色散型X射线荧光光谱等技术表征该复合材料. 采用自制Sievert's设备研究该复合材料的氢吸附(存储),可以储存约2.9%(重量比)的氢.     

Chemical quenching of positronium in Fe2O3/Al2O3 catalysts

Fe₂O₃/Al₂O₃ catalysts were prepared by solid state reaction method using α-Fe₂O₃ and γ-Al₂O₃ nano powders. The microstructure and surface properties of the catalyst were studied using positron lifetime and coincidence Doppler broadening annihilation radiation measurements. The positron lifetime spectrum shows four components. The two long lifetimes τ₃ and τ₄ are attributed to positronium annihilation in two types of pores distributed inside Al₂O₃ grain and between the grains, respectively. With increasing Fe₂O₃ content from 3 wt% to 40 wt%, the lifetime τ₃ keeps nearly unchanged, while the longest lifetime τ₄ shows decrease from 96 ns to 64 ns. Its intensity decreases drastically from 24% to less than 8%. The Doppler broadening S parameter shows also a continuous decrease. Further analysis of the Doppler broadening spectra reveals a decrease in the p-Ps intensity with increasing Fe₂O₃ content, which rules out the possibility of spin-conversion of positronium. Therefore the decrease of τ₄ is most probably due to the chemical quenching reaction of positronium with Fe ions on the surface of the large pores.     

Strongly interacting superspins in Fe3O4 nanoparticles

In this paper we report structural and magnetic properties of Fe₃O₄ nanoparticles synthesized by thermal decomposition of ball milled iron nitrate and citric acid in N₂ and air ambient. The XRD pattern of samples which are prepared in air shows some impurity phases, while the samples synthesized in the N₂ atmosphere are almost pure Fe₃O₄ phase. The result shows that by increasing the particle size, the magnetization of the samples increases. The increase of magnetization by increasing the particle size could be attributed to the lower surface spin canting and surface spin disorder of the larger magnetic nanoparticles. The results of ac magnetic susceptibility measurements show that the susceptibility data are not in accordance with the Néel -Brown model for superparamagnetic relaxation, but fit well with conventional critical slowing down model which indicates that the dipole-dipole interactions are strong enough to cause superspin-glass like phase in these samples.     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

硅纳米孔柱阵列及其四氧化三铁复合薄膜的湿敏电容特性研究

报道了硅纳米孔柱阵列（Si-NPA），Fe₃O₄复合的Si-NPA（Fe ₃O₄/Si-NPA）两种薄 膜材料的制备方法并对其形貌和结构进行了表征，研究了其电容湿度传感特性.结果表明，S i-NPA，Fe₃O₄/Si-NPA均为微米/纳米结构复合体系.当环境相对湿 度从11％上升到95％ 时，采用100 Hz的信号频率进行测试，以Si-NPA和Fe₃O₄/Si-NPA 为电介质材料制成的湿 敏元件的电容增加值分别为起始值的1500％和5500％；采用1000 Hz的信号频率测试时，则 分别为起始值的800％和12000％，显示出两种材料较高的湿度灵敏性和较强的绝对电容输出 信号强度.同时，在升湿和降湿过程中，Si-NPA，Fe₃O₄/Si-NPA都 具有较快的响应速度 ，其响应时间分别为15 s，5 s和20 s，15 s.文章结合材料的形貌和结构特性对其物理机理 进行了分析.上述结果表明，Si-NPA无论是直接作为湿度薄膜传感材料还是作为复合薄膜湿 度传感材料的衬底都具有很好的前景. 关键词： 硅纳米孔柱阵列 3O₄')" href="#">Fe₃O₄ 湿度电容传感特性     

Green synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

In this paper, we have first demonstrated a facile and green synthetic approach for preparing superparamagnetic Fe₃O₄ nanoparticles using α-d-glucose as the reducing agent and gluconic acid (the oxidative product of glucose) as stabilizer and dispersant. The X-ray powder diffraction (XRD), X-ray photoelectron spectrometry (XPS), and selected area electron diffraction (SAED) results showed that the inverse spinel structure pure phase polycrystalline Fe₃O₄ was obtained. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results exhibited that Fe₃O₄ nanoparticles were roughly spherical shape and its average size was about 12.5 nm. The high-resolution TEM (HRTEM) result proved that the nanoparticles were structurally uniform with a lattice fringe spacing about 0.25 nm, which corresponded well with the values of 0.253 nm of the (3 1 1) lattice plane of the inverse spinel Fe₃O₄ obtained from the JCPDS database. The superconducting quantum interference device (SQUID) results revealed that the blocking temperature (T_b) was 190 K, and that the magnetic hysteresis loop at 300 K showed a saturation magnetization of 60.5 emu/g, and the absence of coercivity and remanence indicated that the as-synthesized Fe₃O₄ nanoparticles had superparamagnetic properties. Fourier transform infrared spectroscopy (FT-IR) spectrum displayed that the characteristic band of Fe-O at 569 cm⁻¹ was indicative of Fe₃O₄. This method might provide a new, mild, green, and economical concept for the synthesis of other nanomaterials.     

海藻酸改性的空心Fe3O4纳米颗粒的制备与应用

不使用任何模板一步制得空心Fe₃O₄纳米颗粒,然后将海藻酸钠嫁接在氨基化的空心Fe₃O₄表面,再利用海藻酸盐与钙离子的作用,在空心Fe₃O₄表面形成一个凝胶化层,制得海藻酸盐凝胶化的空心Fe₃O₄纳米颗粒,粒径约为400～500 nm．采用TEM、XRD、XPS、VSM等手段对纳米微球进行表征．VSM表征结果表明在室温下样品磁性材料为超顺磁性．改性Fe₃O₄纳米颗粒成功地用于柔红霉素的载负和缓释,最大载负率和载药量分别为28.4%和14.2%．缓释结果表明,海藻酸盐凝胶化层的存在,能更有效控制柔红霉素缓慢地释放．     

Silane treatment of Fe3O4 and its effect on the magnetic and wear properties of Fe3O4/epoxy nanocomposites

In this study, the effect of silane treatment of Fe₃O₄ on the magnetic and wear properties of Fe₃O₄/epoxy nanocomposites was investigated. Fe₃O₄ nanopowders were prepared by coprecipitation of iron(II) chloride tetrahydrate with iron(III) chloride hexahydrate, and the surfaces of Fe₃O₄ were modified with 3-aminopropyltriethoxysilane. The magnetic properties of the powders were measured on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites using SQUID magnetometer. Wear tests were performed on unmodified and surface-modified Fe₃O₄/epoxy nanocomposites under the same conditions (sliding speed: 0.18 m/s, load: 20 N).The results showed that the saturation magnetization (M_s) of surface-modified Fe₃O₄/epoxy nanocomposites was approximately 110% greater than that of unmodified Fe₃O₄/epoxy nanocomposites. This showed that the specific wear rate of surface-modified Fe₃O₄/epoxy nanocomposites was lower than that of unmodified Fe₃O₄/epoxy nanocomposites. The decrease in wear rate and the increase in magnetic properties of surface-modified Fe₃O₄/epoxy nanocomposites occurred due to the improved dispersion of Fe₃O₄ into the epoxy matrix.     

Large nonlinear optical properties of Fe2O3 nanoparticles

Nonlinear optical properties of Fe₂O₃ nanoparticles were investigated by the signal-beam Z-scan technique with Ar⁺ and Ne–He lasers. The largest reported effective nonlinear coefficient, n₂=−8.07×10⁻⁷ cm²/W, was obtained. It is demonstrated that the nonlinear optical response originals from quantum confinement effect.     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.