基于柱[5]芳烃的超分子组装研究进展

介绍了柱[5]芳烃基于主客体性质和柱状立体结构的超分子组装,以及边缘取代基对柱[5]芳烃的溶解性、功能性和主客体性质的影响。     

基于柱芳烃主客体作用构筑的超分子纳米载体

近年来,基于主客体相互作用的超分子纳米载体因其独特的自组装特性在癌症治疗领域引起了广泛的关注。柱芳烃作为一种新型的大环分子,因其独特的化学结构和优越的主客体包合能力而成为近年来研究的热点。本文根据不同的治疗机制综述了柱状链纳米载体及其在化疗、光动力治疗、联合治疗等领域的应用。在此基础上,展望了柱芳烃基纳米载体的研究方向和发展趋势。     

四氨基柱[5]芳烃二聚体的合成、结构及性质研究

构象固定的刚性多环主体分子为构筑高级复杂的机械互锁结构提供了重要平台. 为挑战合成刚性多环主体并进一步构筑多层次机械互锁结构, 氧杂杯[4]芳烃桥连的柱[5]芳烃二聚体经过Raney Ni催化氢化还原硝基、与叔丁氧羰基(Boc)-β-丙氨酸缩合和脱去N-Boc保护基三步反应, 生成了四氨基柱[5]芳烃二聚体. X射线单晶衍射实验表明三环目标主体分子具有双桶望远镜形状, 并且构象刚性, 随取代基不同仅有微小变化. 此外, 该四氨基二聚体可作为主体与己二腈形成高稳定性的1∶2络合物. 该研究为制备复杂超分子体系提供了新的机会.     

柱[6]芳烃的合成及在分子识别中的应用研究进展

柱芳烃是近年来超分子研究领域中备受关注的一类新型大环主体化合物。与柱[5]芳烃相比,柱[6]芳烃因具有更大的管状空腔结构而表现出了独特的主客体性能。介绍了柱[6]芳烃的结构与构象,并重点阐述了柱[6]芳烃的合成方法以及在分子识别中的应用研究进展。     

基于甲氧基柱[5]芳烃的聚丙烯酸酯有机膜对对硝基苯衍生物的吸附行为

柱芳烃是一类有别于冠醚、杯芳烃、葫芦脲等的柱状大环分子,具有独特的富电子空腔和口腔的可修饰性。 它们可以包结多种有机污染物,对有机污染物的吸附和脱除具有广泛的应用前景。 本文通过核磁共振和紫外滴定的方法首先研究了对硝基苯衍生物与甲氧基柱[5]芳烃(MeP5A)的包结行为,测定了包结常数。 在此基础上,将MeP5A物理混合到聚丙烯酸酯(PA)乳液中,首先制备了甲氧基柱[5]芳烃/聚丙烯酸酯(MeP5A/PA)共混乳液,然后通过静电纺丝技术,得到了MeP5A/PA纳米纤维膜。 采用红外光谱、扫描电子显微镜对MeP5A/PA纳米纤维膜的结构和形貌进行了表征。 将MeP5A/PA纳米纤维膜用于4种对硝基苯衍生物的吸附实验。 结果表明,对硝基苯乙腈显示出与MeP5A最强的包结作用,其K_a=(6.0±0.3)×10² L/mol,PA膜中引入MeP5A,增大了吸附量,但并未改变纤维状形貌。 MeP5A/PA纳米纤维膜的最佳吸附平衡时间为2 h,且MeP5A/PA纳米纤维膜中MeP5A的含量越高,吸附量越大。 但当吸附溶液中MeP5A浓度达到4 mmol/L时(对应的膜中含有的MeP5A物质的量为1.4×10^-2 mmol),其吸附基本达到平衡,继续增加MeP5A物质的量,其吸附量变化不大。     

药物输送体系构筑中的超分子组装策略

超分子组装提供了药物输送体系设计的新原理。以高效的分子间非共价键作用为驱动力,超分子药物输送体系能够利用结构简单的分子单体获得精确的成分控制,并使得载体结构易于预测,形貌与体积易于调控,有利于实现药物的控制释放。本文首先总结超分子药物输送体系的研究背景,之后重点介绍基于环糊精、杯芳烃、柱芳烃和葫芦脲的主-客体体系的超分子药物输送体系的构建与药物输送功能,然后介绍水溶性的超分子有机框架在药物输送方面的应用,最后提出了超分子药物载体实用化需要克服的若干挑战性问题。     

基于柱[5]芳烃聚合物水凝胶的制备及对百草枯的可视化检测

合成了单功能化的柱[5]芳烃单烯体,然后将其与丙烯酰胺(AAM)、交联剂N,N'-亚甲基双丙烯酰胺(MBA)和引发剂偶氮二异丁腈(AIBN)在70 oC下反应12 h后形成含有大环主体柱[5]芳烃的高分子聚合物,将此聚合物分别浸泡于DMSO、水中各1周,并每天更换新鲜的溶剂,最后通过此聚合物的红外光谱图证实成功制备了含有柱[5]芳烃的聚合物水凝胶.利用紫外吸收光谱测试表征了水凝胶对百草枯的吸收作用.将该水凝胶浸入浓度从小到大的百草枯溶液中,发现水凝胶颜色由浅黄色变为棕红色,这是由于水凝胶中的柱[5]芳烃与N,N'-二甲基-4,4'-联吡啶客体分子之间主客体作用形成了含有准轮烷结构的超分子聚合物所致.     

基于柱[5]芳烃主客体包结构筑分子响应型超分子水凝胶

主客体相互作用是在水溶液中与大环主体分子形成稳定的包结物的理想驱动力.以功能化的苯并咪唑衍生物为客体(M),水溶性柱[5]芳烃为主体构建了一种分子响应型超分子水凝胶.通过1H NMR, 2D NOESY和扫描电子显微镜(SEM)研究了水凝胶的成凝胶机理.有趣的是,主客体包结作用、柱[5]芳烃间有序的"外腔"π-π相互作用和分层堆积对于获得超分子水凝胶是必不可少的,非共价键相互作用的动态可逆性使凝胶体系对温度变化/化学刺激产生响应.此外,加入竞争性客体己二腈(ADN)/百草枯(PQ)后,柱[5]芳烃基水凝胶可转化为溶胶.因此,该超分子水凝胶可以选择性识别有机分子.     

Pillar[5]arene based conjugated macrocycle polymers with unique photocatalytic selectivity

The development of heterogeneous catalysts with substrate shape, size or electronic constitution selectivity is a huge challenge in photocatalysis. Reported herein is a host-guest interaction strategy to endow photocatalysts with special selectivity. By adjusting the precursors, conjugated macrocycle polymers (CMPs) with pillar[5]arene struts (CMP-1 and CMP-2) and a corresponding non-pillar[5]arene-contained conjugated organic polymer (COP-1) were prepared and the photocatalytic activities toward sulfide derivatives were investigated. The sulfides showed similar conversions when COP-1 was used as a photocatalyst, but exhibited significant differences when it turned to the CMPs. Remarkably, the conversion yield of S-1 achieved near 18 folds over the one of S-2 when CMP-2 was used as a catalyst. Mechanism studies confirmed that the “host-guest” effect of pillar[5]arene struts in CMPs was the main cause of the difference. The present work establishes CMPs as novel heterogeneous photocatalysts with substrate selectivity, and such a method will inspire the researchers concerning preparation of heterogeneous catalysts with excellent selectivity.     

Pillar[5]arene based conjugated macrocycle polymers with unique photocatalytic selectivity

The development of heterogeneous catalysts with substrate shape, size or electronic constitution selectivity is a huge challenge in photocatalysis. Reported herein is a host-guest interaction strategy to endow photocatalysts with special selectivity. By adjusting the precursors, conjugated macrocycle polymers (CMPs) with pillar[5]arene struts (CMP-1 and CMP-2) and a corresponding non-pillar[5]arene-contained conjugated organic polymer (COP-1) were prepared and the photocatalytic activities toward sulfide derivatives were investigated. The sulfides showed similar conversions when COP-1 was used as a photocatalyst, but exhibited significant differences when it turned to the CMPs. Remarkably, the conversion yield of S-1 achieved near 18 folds over the one of S-2 when CMP-2 was used as a catalyst. Mechanism studies confirmed that the “host-guest” effect of pillar[5]arene struts in CMPs was the main cause of the difference. The present work establishes CMPs as novel heterogeneous photocatalysts with substrate selectivity, and such a method will inspire the researchers concerning preparation of heterogeneous catalysts with excellent selectivity.     

Positively Charged Nanoaggregates Based on Zwitterionic Pillar[5]arene that Combat Planktonic Bacteria and Disrupt Biofilms

Bacterial biofilms are difficult to eradicate because they are less susceptible to antibiotics and more easily develop resistance. Therefore, there is an urgent need for new materials that can combat planktonic bacteria and disrupt established biofilms. To tackle this challenge, we design a multifunctional zwitterionic pillar[5]arene, which can self‐assemble into weakly positively charged nanoaggregates that exhibit antibacterial activity against Gram‐negative Escherichia coli (DH5α) and Gram‐positive Staphylococcus aureus (SH1000) bacterial strains in solution. In addition, the zwitterionic pillar[5]arene can efficiently disrupt pre‐existing Escherichia coli (DH5α) biofilms and kill the biofilm‐enclosed bacteria without rapid generation of resistance.     

An Interesting Approach to Bis-calix[5]arene Analogue from Calix[6]arene

Calix [n] arenas {n = 4, 6 or 8} are easily prepared from formaldehyde and para-substituted phenols via cyclic condensation under alkaline conditions in one step. It is not surprising that the calyx [n] arene (n = 4, 6, 8) chemistry has been developing very rapidly during the latest 20 years1. However, it is not the case for calixarenes with odd benzene rings (for example, n = 5). The yield of p-tert-butylcalix [5] arene synthesized in one-step from p-tert-butylphenol and formaldehyde was a…     

A Water-Soluble Leggero Pillar[5]arene

The study of aqueous-phase molecular recognition of artificial receptors is one of the frontiers in supramolecular chemistry since most biochemical processes and reactions take place in an aqueous medium and heavily rely on it. In this work, a water-soluble version of leggero pillar[5]arene bearing eight positively charged pyridinium moieties (CWP[5]L) was designed and synthesized, which exhibited good binding affinities with certain aliphatic sulfonate species in aqueous solutions. Significantly, control experiments demonstrate that the guest binding performance of CWP[5]L is superior to its counterpart water-soluble macrocyclic receptor in traditional pillararenes.     

Biomimetic Approach for Highly Selective Artificial Water Channels Based on Tubular Pillar[5]arene Dimers

Artificial water channels mimicking natural aquaporins (AQPs) can be used for selective and fast transport of water. Here, we quantify the transport performances of peralkyl-carboxylate-pillar[5]arenes dimers in bilayer membranes. They can transport ≈10⁷ water molecules/channel/second, within one order of magnitude of the transport rates of AQPs, rejecting Na⁺ and K⁺ cations. The dimers have a tubular structure, superposing pillar[5]arene pores of 5 Å diameter with twisted carboxy-phenyl pores of 2.8 Å diameter. This biomimetic platform, with variable pore dimensions within the same structure, offers size restriction reminiscent of natural proteins. It allows water molecules to selectively transit and prevents bigger hydrated cations from passing through the 2.8 Å pore. Molecular simulations prove that dimeric or multimeric honeycomb aggregates are stable in the membrane and form water pathways through the bilayer. Over time, a significant shift of the upper vs. lower layer occurs initiating new unexpected water permeation events through toroidal pores.     

Guest induced morphology transitions of star shaped pillar[5]arene trimer via endo host-guest and "exo-wall" electron-transfer interactions

Star shape bridged pillar[5]arene trimer(C3-PLT) based on benzene-1,3,5-tricarboxamide(BTAs) was successfully synthesized,which exhibited outstanding guest responsive morphology transition properties.The morphology tining studies was efficiently achieved with the addition of competitive guest molecules G1 and G2 by various self-assembly mechanisms.C3-PLT itself displays nanofiber morphology through H-type π-π stacking,and this nanofiber morphology can be completely transformed into spherical vesicles by host-guest interaction Gl,while upon addition of G2 into C3-PLT by means of "exo-wall" electron-transfer interactions,sheet superstructures can be observed.SEM,~1 H NMR,DOSY,fluorescence spectroscopy,and viscosity have verified the formation of supramolecular polymers and morphological transitions between C3-PLT with both guests.     

Supramolecular control over LCST behavior of hybrid macrocyclic system based on pillar[5]arene and crown ether

A hybrid system containing a pillar[5]arene unit and ten crown ether moieties was developed. The LCST behavior and thermo-responsiveness were successfully introduced into this pillar[5]arene-crown ether system. Both host-guest interactions and salting-out effect displayed great effects in realizing the supramolecular control over LCST properties and thermo-responsiveness. Compared with the individual macrocycles, this hybrid macrocycle system dramatically amplified the supramolecular control effect over LCST behavior.