Ag2.54Tl2Mo12Se15: a new structure type containing Mo6 and Mo9 clusters

The novel structure‐type Ag_2.54Tl₂Mo₁₂Se₁₅ (silver thallium molybdenum selenide) is built up of Mo₆Seⁱ₈Se^a₆ and Mo₉Seⁱ₁₁Se^a₆ cluster units in a 1:2 ratio, which are three‐dimensionally connected to form the Mo–Se network. The Ag and Tl cations are distributed in several voids within the cluster network. Three of the seven independent Se atoms and one Tl atom lie on sites with 3.. symmetry (Wyckoff sites 2c or 2d).     

The layered structure of poly­[[di‐μ‐chloro‐bis­[chloro(2‐ethyl­tetrazole‐κN4)copper(II)]]‐di‐μ‐2‐ethyl­tetrazole‐κ2N1:N4]

In the polymeric title complex, [CuCl₂(C₃H₆N₄)₂]_n, there are two ligands in the asymmetric unit. The Cu atom adopts an elongated octahedral geometry, with two 2‐ethyl­tetrazole ligands [Cu—N = 2.0037 (16) and 2.0136 (16) Å] and two Cl atoms [Cu—Cl = 2.2595 (6) and 2.2796 (6) Å] in equatorial positions. A Cl atom and a symmetry‐related 2‐ethyl­tetrazole mol­ecule [Cu—Cl = 2.8845 (8) Å and Cu—N = 2.851 (2) Å] lie in the axial positions of the octahedron. One of the two 2‐­ethyltetrazole ligands of the asymmetric unit exhibits bidentate binding to two Cu atoms through two N atoms of the tetrazole ring, whereas the other ligand is coordinated in a monodentate fashion via one tetrazole N atom. The Cu‐atom octahedra form dimer entities by sharing edges with equatorial and axial Cl atoms. The dimers are linked together through the 2‐ethyl­tetrazole ligands to form one‐dimensional polymeric zigzag chains extending along the b axis. The chains are connected into infinite layers parallel to the (10) plane via the 2‐ethyl­tetrazole ligands.     

Über Sesquiselenide der Lanthanoide: Einkristalle von Ce2Se3 im C‐, Gd2Se3 im U‐ und Lu2Se3 im Z‐Typ

On Sesquiselenides of the Lanthanoids: Single Crystals of C‐type Ce₂Se₃, U‐type Gd₂Se₃, and Z‐type Lu₂Se₃ Single crystals of lanthanoid sesquiselenides (M₂Se₃; here: M = Ce, Gd, Lu) are accessible through conversion of the elements (lanthanoid and selenium) in molar ratios of 2:3 within seven days at 850 °C from evacuated silica ampoules if equimolar amounts of NaCl serve as a flux. In the case of Ce₂Se₃ (a = 897.74(6) pm) und Gd₂Se₃ (a = 872.56(5) pm) the cubic C‐type (I4¯3d, Z = 5.333) forms as dark red beads, whereas the orthorhombic Z‐type (Fddd, Z = 16) emerges for Lu₂Se₃ (a = 1125.1(1), b = 798.06(8), c = 2387.7(2) pm) as orange‐yellow bricks. Upon oxidation of monochloride hydrides (MClH_x or A_yMClH_x; M = Ce, Gd, Lu; x = 1; A = Li, Na; y = 0.5) with selenium in arc‐welded tantalum ampoules the same main products appear with C‐Ce₂Se₃ and Z‐Lu₂Se₃, even with a surplus of NaCl or LiCl as fluxing agent. In the case of Gd₂Se₃, however, black‐red needles of the orthorhombic U‐type (Pnma, Z = 4; a = 1118.2(1), b = 403.48(4); c = 1097.1(1) pm) are yielded instead of C‐Gd₂Se₃. C‐Ce₂Se₃ crystallizes in a cation‐deficient Th₃P₄‐type structure (Ce₂S₃ type) according to Ce_2.667□_0.333Se₄ (Z = 4) or with Z = 5.333 for the empirical formula Ce₂Se₃. Here, Ce³⁺ is coordinated by eight Se^2— anions trigon‐dodecahedrally. In U‐Gd₂Se₃ (U₂S₃ type) two crystallographically independent Gd³⁺ cations with coordination numbers of 7 (Gd1) and 7+1 (Gd2), respectively, are present, exhibiting mono‐ or bicapped trigonal prisms as coordination polyhedra. The crystal structure of Z‐Lu₂Se₃ (Sc₂S₃ type) shows two different Lu³⁺ cations as well, which now both reside in octahedral coordination of six Se^2— anions each.     

Monoclinic Cu3(SeO3)2Cl2: an oxo­halide with an unusual CuO4Cl trigonal–bipyramidal coordination

In single crystals of a new monoclinic (C2/m) form of tricopper(II) diselenium(IV) dichloride hexa­oxide, Cu₃(SeO₃)₂Cl₂, the Se atom is in the 4i position, while the two Cu atoms are in 2a and 4i positions. The structure is based on layers of CuO₄Cl trigonal bipyramids, CuO₄ square planes and SeO₃E tetra­hedra. The Cu polyhedra are connected by edge‐ and corner‐sharing to form [010] chains and these chains are bridged by the Se atoms to form (001) layers. The compound is isostructural with Cu₃(TeO₃)₂Br₂.     

Hg3Se3O10, a mercury(II) compound with mixed‐valence oxoselenium(IV/VI) anions

The title compound, trimercury(II) bis­[selenite(IV)] selen­ate(VI), contains three crystallographically inequivalent Hg^II cations with coordination numbers of eight (denoted Hg1 and Hg2) and five (denoted Hg3). The corresponding coordination polyhedra around the metal atoms might be described as intermediates between a square antiprism and a triangulated dodecahedron for both Hg1 and Hg2, and a strongly distorted truncated octahedron for Hg3. [HgO_8/2] layers of edge‐sharing [HgO₈] polyhedra propagate parallel to the bc plane, and are connected via Se^VIO₄ tetrahedra and [Hg3O₅] polyhedra along the a axis, forming an arrangement with channels propagating parallel to the b axis. The two independent Se^IVO₃ pyramids bridge the Hg atoms, and the non‐bonding orbitals of the Se^IV ions protrude into the channels from opposite sides.     

Synthesis and Structure of the Bicyclic [Sn4Se11]6– Anion in Na6Sn4Se11 · 22 H2O

Na₆Sn₄Se₁₁ · 22 H₂O can be crystallised at –8 °C as yellow‐orange needles from the 1 : 2 H₂O/CH₃OH mother liquor of a superheated reaction mixture of NaOH(s), Sn and Se. The bicyclic [Sn₄Se₁₁]^6– anion exhibits crystallographic C₂ symmetry and is composed of corner‐bridged SnSe₄ tetrahedra. Two opposite tin atoms of an Sn₄Se₄ 8‐membered ring are linked by a common Se atom, thereby affording two 6‐membered boat‐shaped Sn₃Se₃ rings with a shared Sn–Se–Sn bridging unit. [Sn₄Se₁₁]^6– thus represents the immediate precursor of the well‐known adamantane‐like [Sn₄Se₁₀]^4– anion.     

Synthesis and Crystal Structures of NiPdTe and Ni2PdSe2

The metal‐rich chalcogenides NiPdTe and Ni₂PdSe₂ were synthesized by heating stoichiometric mixtures of the elements at 823–1323 K in silica ampoules under argon atmosphere. The structures were determined by single crystal X‐ray diffraction. NiPdTe (Pnma, a = 8.337(2), b = 3.758(1), c = 6.290(1) Å, Z = 4) is build up by a distorted cubic closed packing of Te atoms with Ni atoms in one half of the tetrahedral holes. The Ni atoms form zigzag‐chains with short Ni–Ni bonds. The Pd atoms are located in the octahedral holes and are fivefold coordinated by Te atoms due to a strong shift off the centers. The structure of NiPdTe is related to the TiNiSi type due to a similar nickel substructure and to the Cu₂Sb type with respect to the fcc packing of the anions. Ni₂PdSe₂ (I4/mmm, a = 10.446(1), c = 5.751(1) Å, Z = 8) forms a new structure type with strongly distorted edge‐ and corner‐sharing NiSe₄ tetrahedra. The Pd atoms are either planar coordinated by four Se or located in the centers of face‐sharing Ni₈ cubes. The structure of Ni₂PdSe₂ merges metallic building blocks with structural fragments typical for polar compounds.     

Synthesis and Crystal Structure of Bis(tetraethylammonium) Octabromo‐triselenate(II)‐{dibromodiselenate(I)}, [NEt4]2[Se3Br8(Se2Br2)], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The brown crystals of [NEt₄]₂[Se₃Br₈(Se₂Br₂)] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraethylammonium bromide. The crystal structure of 1 has been determined by the X‐ray methods and refined to R = 0.0308 for 10433 reflections. The crystals are monoclinic, space group P2₁ with Z = 2 and a = 12.0393(3) Å, b = 11.8746(3) Å, c = 13.1946(3) Å, β = 96.561(1)° (123 K). In the solid state structure the anion of 1 is built up of Se₃Br₈ unit which consists of a triangular arrangement of three planar SeBr₄ units sharing a common edge through two μ₃‐bridging Br atoms, and one Se₂Br₂ molecule which is linked to one of μ₃‐bridging Br atoms. The three Se^II atoms form a triangle which is almost perpendicular to the planes given by three SeBr₄ moieties. The contact between the μ₃Br and the Se^I atom of the Se₂Br₂ molecule is 3.1711(8) Å and can be interpreted as a bond of the donor‐acceptor type with the μ₃Br as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II‐Br and μ₃Br‐Se^II bond lengths are in the ranges 2.3537(7)–2.4737(7) Å and 2.7628(7)–3.1701(7) Å, respectively. The bond lengths in coordinated Se₂Br₂ molecule are: Se^I‐Se^I = 2.2636(9) Å, Se^I‐Br = 2.3387(11) and 2.3936(8) Å.     

(Terpyridine)manganese(II) Coordination Polymers with Thio‐ and Selenidoarsenate(III) Ligands: Coligand Influence on the Chalcogenidoarsenate(III) Species and Coordination Mode

Hydrothermal reaction of [MnCl₂(terpy)] with elemental As and Se at 150 °C in 1:2:4 and 1:4:8 molar ratios in the presence of Cs₂CO₃ affords the complexes [{Mn(terpy)}₂ (As₂Se₅)]₂ ( 1 ) and [{Mn(terpy)}₂ (As₄Se₈)] ( 2 ), respectively. 1 contains dipyramidal [As₂Se₅]^4? ligands that bridge three Mn^II atoms in a tetradentate μ₃‐1κ²Se¹,Se²:2κSe⁴:3κSe⁵ manner. The tetranuclear complex is centrosymmetric and exhibits a central 8‐membered (MnSeAsSe)₂ ring. Cyclic [As₄Se₈]^4? ligands are present in the centrosymmetric dinuclear complex 2 and chelate the Mn(II) atoms through adjacent terminal Se atoms. Both 1 and 2 are linked into infinite chains through weak Mn···Se interactions. [{Mn(terpy)}₂(As₄S₈)] ( 3 ) and ( 4 ) can be obtained by hydrothermal reaction of [MnCl₂(terpy)] with As₂S₃ at respectively 150 °C and 190 °C. Whereas 3 exhibits an identical connectivity pattern to that of 2 , the coordination polymer 4 contains vierer chains that coordinate {(terpy)Mn}²⁺ fragments in a bidentate manner through terminal S atoms. The complex ( 5 ) contains double chains and results from the analogous hydrothermal reaction of [MnCl₂(tren)] with As₂S₃ at 150 °C.     

A Gadolinium Diphenate Coordination Polymer, [Gd2(H2O)2(C14H8O4)3], with One‐dimensional Structure

A hydrothermal reaction of Gd(NO₃)₃ and 2, 2′‐diphenic acid give rise to a new coordination compound equation/tex2gif-stack-2.gif[Gd₂(H₂O)₂(C₁₄H₈O₄)₃] with one‐dimensional structure. Single crystal X‐ray studies shows that the compound has infinite O‐Gd‐O one‐dimensional chains resulting from a bonding between Gd³⁺ cations and diphenate anions. The Gd³⁺ ions are distorted dodecahedra with respect to oxygen atoms. Magnetic investigations show no ordering up to 4K and the compound exhibit photoluminescence at room temperature.     

Quaternäre Caesium‐Kupfer(I)‐Lanthanoid(III)‐Selenide vom Typ CsCu3M2Se5 (M = Sm,Gd — Lu)

Quaternary Cesium Copper(I) Lanthanoid(III) Selenides of the Type CsCu₃M₂Se₅ (M = Sm, Gd — Lu) By oxidation of mixtures of copper and lanthanoid metal with elemental selenium in molar ratios of 1 : 1 : 2 and in addition of CsCl quaternary cesium copper(I) lanthanoid(III) selenides with the formula CsCu₃M₂Se₅ (M = Sm, Gd — Lu) were obtained at 750 °C within a week from torch‐sealed evacuated silica tubes. An excess of CsCl as flux helps to crystallize golden yellow or red, needle‐shaped, water‐resistant single crystals. The crystal structure of CsCu₃M₂Se₅ (M = Sm, Gd — Lu) (orthorhombic, Cmcm, Z = 4; e. g. CsCu₃Sm₂Se₅: a = 417.84(3), b = 1470.91(8), c = 1764.78(9) pm and CsCu₃Lu₂Se₅: a = 407.63(3), b = 1464.86(8), c = 1707.21(9) pm, respectively) contains [MSe₆]^9— octahedra which share edges to form double chains running along [100]. Those are further connected by vertices to generate a two‐dimensional layer parallel to (010). By edge‐ and vertex‐linking of [CuSe₄]^7— tetrahedra two crystallographically different Cu⁺ cations build up two‐dimensional puckered layers parallel to (010) as well. These sheet‐like structure interconnects the equation/tex2gif-stack-3.gif{[M₂Se₅]^4—} layers to create a three‐dimensional network according to equation/tex2gif-stack-4.gif{[Cu₃M₂Se₅]^—}. Thus empty channels along [100] form, apt to take up the Cs⁺ cations. These are surrounded by eight plus one Se^2— anions in the shape of (2+1)‐fold capped trigonal prisms with Cs—Se distances between 348 and 368 pm (8×) and 437 (for M = Sm) or 440 pm (for M = Lu), respectively, for the ninth ligand.     

Manganese(II) Complexes with Bridging Selenidoarsenate(III) Anions [AsSe2(Se2)]3− and [(AsSe2)2(μ‐Se2)]4−

Solvothermal reaction of [MnCl₂(terpy)] with elemental As and Se at a 1:1:2 molar ratio in H₂O/trien (10:1) at 150 °C affords the linear trimanganese(II) complex [{Mn(terpy)}₃(μ‐AsSe₄)₂] ( 1 ). The tridentate [AsSe₂(Se₂)]^3? anions of 1 chelate the terminal {Mn(terpy)}²⁺ fragments and bridge these through their remaining Se atom to the central {Mn(terpy)}²⁺ moiety. Weak interactions of Mn1···Se and Mn3···Se bonds with length 2.914(7) and 3.000(7) Å link the molecules of 1 into infinite chains. Treatment of [MnCl₂(cyclam)]Cl with As and Se at a 1:1:2 molar ratio in superheated H₂O/CH₃OH (1:1) at 150 °C yields the dinuclear complex [{Mn(cyclam)}₂ (μ‐As₂Se₆)] ( 2 ), whose novel [(AsSe₂)₂(μ‐Se₂)]^4? ligands bridge the Mn^II atoms in a μ‐1κ²Se¹, Se²: 2κ²Se⁵,Se⁶ manner.     

Poly[μ2‐chloro‐μ2‐1,4‐oxathiane‐κ2S:S‐copper(I)]

The title complex, [CuCl(C₄H₈OS)]_n, contains infinite spiral (CuS)_n chains linked by bridging Cl atoms into layers. The Cl atoms do not form polymeric fragments with Cu^I, but combine into isolated centrosymmetric Cu₂Cl₂ units. The compound is non‐isomorphous with the Br‐containing analogue, which contains Cu₈S₈ rings linked by Br atoms into chains. The O atom of the 1,4‐oxathiane mol­ecule does not realize its coordination abilities in the known copper(I)–halide complexes, while in copper(II)–halide complexes, oxathiane is coordinated via the S and O atoms. This falls into a pattern of the preferred inter­actions, viz. weak acid (Cu^I atom) with weak base (S atom) and harder acid (Cu^II atom) with harder base (O atom).     

Die Seltenerdmetallpolyselenide Gd8Se15, Tb8Se15−x,Dy8Se15−x,Ho8Se15−x,Er8Se15−x und Y8Se15−x (0 < x ≤ 0.3) – Zunehmende Fehlordnung in ausgedünnten,planaren Selenschichten

The Rare Earth Metal Polyselenides Gd₈Se₁₅, Tb₈Se_15?x, Dy₈Se_15?x, Ho₈Se_15?x, Er₈Se_15?x, and Y₈Se_15?x – Increasing Disorder in Defective Planar Selenium Layers Single crystals of the rare earth metal polyselenides Gd₈Se₁₅, Tb₈Se_15?x, Dy₈Se_15?x, Ho₈Se_15?x, Er₈Se_15?x, and Y₈Se_15?x (0 < x ≤ 0.3) have been prepared by chemical transport reactions (1120 K→ 970 K, 14 days, I₂ as carrier) starting from pre‐annealed powders of nominal compositions between LnSe₂ and LnSe_1.9. The isostructural title compounds adopt a 3 × 4 × 2 superstructure of the ZrSSi type and can be described in space group Amm2 with lattice parameters of a = 12.161(1) Å, b = 16.212(2) Å and c = 16.631(2) Å (Gd₈Se₁₅), a = 12.094(2) Å, b = 16.123(2) Å and c = 16.550(2) Å (Tb₈Se_15?x), a = 12.036(2) Å, b = 16.060(2) Å and c = 16.475(2) Å (Dy₈Se_15?x), a = 11.993(2) Å, b = 15.999(2) Å and c = 16.471(2) Å (Ho₈Se_15?x), a = 11.908(2) Å, b = 15.921(2) Å and c = 16.428(2) Å (Er₈Se_15?x), and a = 12.045(2) Å, b = 16.072(3) Å and c = 16.626(3) Å (Y₈Se_15?x), respectively. The structure consists of puckered [LnSe] double slabs and planar Se layers alternating along [001]. The planar Se layers contain a disordered arrangement of dimers, Se^2? and vacancies. All compounds are semiconducting and contain trivalent rare earth metals (Ln³⁺).     

Manganese(II) Coordination Polymers [{Mn(tren)}(As2Se4)] and [{Mn(tren)}(As4Se7)] with Infinite Selenidoarsenate(III) Chains $^{1}_{\infty}\rm [AsSe_{2}^{-}]$ and $^{1}_{\infty}\rm [As_{4}Se_{7}^{2-}]$

Solvothermal reaction of [MnCl₂(tren)] with elemental As and Se at 1:1:2 and 1:6:12 molar ratios in H₂O/tren (10:1) affords the 1D coordination polymers [{Mn(tren)}(As₂Se₄)] ( 1 ) and [{Mn(tren)}(As₄Se₇)] ( 2 ), respectively. 1 contains vierer infinite chains, which coordinate [(tren)Mn]²⁺ fragments through every second terminal Se atom of their corner‐sharing pyramidal AsSe₃ building units. The double chains of compound 2 are related to the chains 1 by a simple rearrangement of the connectivity pattern between the participating AsSe₃ pyramids and contain condensed centrosymmetric As₈Se₈ and As₄Se₄ rings.     

The superstructure of KCuCe2Se6 due to ordering of copper cations

The quaternary compound KCuCe₂Se₆ was obtained as black needlelike crystals by reacting a mixture of K₂Se, Cu, Ce and Se in a 2:1:1:8 ratio at 450 °C. The compound crystallizes in the orthorhombic space group Fddd with a = 8.5907(5), b = 11.3962(8) and c = 44.490(3) Å which is a superstructure of the already published structure of KCuCe₂Se₆ which was described in space group Immm. The Ce³⁺ ions are in bicapped distorted trigonal prismatic coordination of Se atoms and the Cu⁺ ions are in tetrahedral environment. The prisms are connected via triangular faces forming rods parallel to the crystallographic a axis. These rods are joined by one capping Se atom and one Se center of the triangular faces thus leading to the formation of anionic layers [CuCe₂Se₆]_n^nȒ within the ab plane. The Cu⁺ ions occupy only one half of the tetrahedral sites in an ordered fashion in contrast to the statistical occupation reported for the substructure. The charge balancing K⁺ ions are located between the anionic layers.     

Dinuclear Manganese(II) Complexes with Bridging Selenidodiarsenate Anions [As2Se4]4−, [As2Se5]4− and [As2Se6]2−

Solvothermal reaction of [MnCl₂(amine)] (amine = terpy and tren) with elemental As and Se at a 1:1:2 molar ratio in H₂O/tren (10:1) affords the dimanganese(II) complexes [{Mn(terpy)}₂(μ‐As₂Se₄)] ( 1 ) and [{Mn(tren)}₂(μ‐As₂Se₅)] ( 2 ) respectively. The tetradentate [As₂Se₄]^4? bridging ligands in 1 contain a central As–As bond and exhibit approximately C_2h symmetry. Pairs of gauche sited Se atoms participate in five‐membered As₂Se₂Mn chelate rings. In contrast, two AsSe₃ pyramids share a common corner in the [As₂Se₅]^4? ligands of 2 and each coordinates an [Mn(tren)]²⁺ fragment through a single terminal Se atom. Such dinuclear complexes are linked into tetranuclear moieties through weak Se···Mn interactions of length 3.026(3) Å involving one of these terminal Se atoms. At a 1:3:6 molar ratio, solvothermal reaction of [MnCl₂(tren)] with As and Se leads to formation of a second dinuclear complex [{Mn(tren)}₂(μ‐As₂Se₆)₂] ( 3 ), which contains two bridging bidentate [As₂Se₆]^2? ligands. These are cyclic with an As₂Se₄ ring and can be regarded as being derived from [As₂Se₅]^4? anions by formation of two Se‐Se bonds to an additional Se atom.     

1,3‐Bis[2‐(dimethylaminomethyl)phenyl]triselenide

The title compound, C₁₈H₂₄N₂Se₃, consists of discrete molecules; owing to the presence of strong intramolecular N...Se interactions [N...Se = 2.671 (4) and 2.873 (4) Å], the chalcogen Se atoms of the angular Se₃ chain exhibit different coordination geometries, i.e. the terminal Se atoms are tricoordinated and exhibit a T‐shaped environment of the CNSe₂ core [N...Se—Se = 173.73 (9) and 172.29 (9)°], while the central Se atom is dicoordinated to the other two Se atoms, with an Se—Se—Se angle of 108.32 (2)°.     

catena‐Poly­[[bis­[μ‐1,2‐bis(1‐methyl­tetrazol‐5‐yl)­ethane‐κ2N4:N4′]bis[chloro­copper(II)]]‐di‐μ‐chloro]

In the title compound, [Cu₂Cl₄(C₆H₁₀N₈)₂]_n, the ligand has C₂ symmetry, and the Cu and Cl atoms lie on a mirror plane. The coordination polyhedron of the Cu atom is a distorted square pyramid, with the basal positions occupied by two N atoms from two different ligands [Cu—N = 2.0407 (18) Å] and by the two Cl atoms [Cu—Cl = 2.2705 (8) and 2.2499 (9) Å], and the apical position occupied by a Cl atom [Cu—Cl = 2.8154 (9) Å] that belongs to the basal plane of a neighbouring Cu atom. The [CuCl₂(C₆H₁₀N₈)]₂ units form infinite chains extending along the a axis via the Cl atoms. Intermolecular C—H⃛Cl contacts [C⃛Cl = 3.484 (2) Å] are also present in the chains. The chains are linked together by intermolecular C—H⃛N interactions [C⃛N = 3.314 (3) Å].