Enzyme Immunoassay of Thyroid-Stimulating Hormone Using Dried Blood Samples a Simple Technique of Screening for Congenital Hypothyroidism

Abstract

A method for enzyme imnunoassay of thyroid-stimulating hormone (TSH) in dried blood spotted onto filter paper has been developed. TSH was conjugated to horse-radish peroxidase according to Nakane's method. Separation of the bound and free fractions was obtained by a double antibody solid phase method using polyacetal beads which were coated with the purified IgG fraction from goat anti-rabbit IgG serum. p-Hydroxyphenyl propionic acid was used as substrate for the fluorophotometric assay of peroxidase activity. The assay sensitivity is 0.07, μU TSH/assay tube, which is equivalent to μU/ml when five 3 mm discs of dried blood spot are assayed. TSH values in dried blood samples obtained by this method correlate well with those of serum samples obtained by radioimmunoassay (r=0.89). The coefficients of variation were 6.8 to 13.4% (within assay) and 5 to 40% (between assay). The enzyme immunoassay of TSH presented here is applicable to the mass-screening for congenital hypothyroidism of neonate.     

Well-oriented ZZ–PS-tag with high Fc-binding onto polystyrene surface for controlled immobilization of capture antibodies

The site specificity and bioactivity retention of antibodies immobilized on a solid substrate are crucial requirements for solid phase immunoassays. A fusion protein between an immunoglobulin G (IgG)-binding protein (ZZ protein) and a polystyrene-binding peptide (PS-tag) was constructed, and then used to develop a simple method for the oriented immobilization of the ZZ protein onto a PS support by the specific attachment of the PS-tag onto a hydrophilic PS. The orientation of intact IgG was achieved via the interaction of the ZZ protein and the constant fragment (Fc), thereby displayed the Fab fragment for binding antigen. The interaction between rabbit IgG anti-horseradish peroxidase (anti-HRP) and its binding partner HRP was analyzed. Results showed that the oriented ZZ–PS-tag yielded an IgG-binding activity that is fivefold higher than that produced by the passive immobilization of the ZZ protein. The advantage of the proposed immunoassay strategy was demonstrated through an enzyme-linked immunosorbent assay, in which monoclonal mouse anti-goat IgG and HRP-conjugated rabbit F(ab′)₂ anti-goat IgG were used to detect goat IgG. The ZZ–PS-tag presented a tenfold higher sensitivity and a wider linear range than did the passively immobilized ZZ protein. The proposed approach may be an attractive strategy for a broad range of applications involving the oriented immobilization of intact IgGs onto PS supports, in which only one type of phi-PS (ZZ–PS-tag) surface is used.     

A nanochannel array based device for determination of the isoelectric point of confined proteins

A nanochannel array based nanodevice can mimic the biological environments and thus unveil the natural properties, conformation and recognition information of biomolecules such as proteins and DNA in confined spaces. Here we report that porous anodic alumina (PAA) of a highly parallel nanochannel array covalently modified with proteins significantly modulates the transport of a negatively charged probe of ferricyanide due to the electrostatic interactions between the probes and modified nanochannel inner surface. Results show that such electrostatic interaction exists in a wide range of ionic strength from 1 mM to 100 mM in 20 nm nanochannels modified with proteins (hemoglobin, bovine serum albumin, and goat anti-rabbit IgG secondary antibody). In addition, the maximal steady-state flux of the charged probe through the modified nanochannel array is directly related to the ionic strength which determines the electric double layer thickness and solution pH which modulates the nanochannel surface charge. Thus, the modulated mass transport of the probe by solution pH can be used to study the charge properties of the immobilized proteins in nanochannel confined conditions, leading us to obtain the isoelectric point (pI) of the proteins confined in nanochannels. The determined pI values of two known proteins of hemoglobin and bovine serum albumin are close to the ones of the same proteins covalently modified on a 3-mercaptopropionic acid self-assembled monolayer/gold electrode. In addition, the pI of an unknown protein of goat anti-rabbit IgG secondary antibody confined in nanochannels was determined to be 6.3. Finally, the confinement effect of nanochannels on the charge properties of immobilized proteins has been discussed.     

Glycidyl methacrylate-co-N-vinyl-2-pyrrolidone coated polypropylene strips: Synthesis, characterization and standardization for dot-enzyme linked immunosorbent assay

Glycidyl methacrylate and N-vinyl-2-pyrrolidone (GMA-co-NVP) copolymers with various GMA:NVP ratios were synthesized by solution polymerization technique in toluene using 2,2′-azobisisobutyronitrile (AIBN) as free radical initiator and dip coated onto polypropylene strips. The copolymer composition in polymeric coatings was confirmed by proton NMR spectroscopy. Various techniques like FTIR, SEM and contact angle were used for surface characterization of the polymer coatings. These polymer coated strips were evaluated and standardized for their application in dot-ELISA in two steps. In first step, specificity, sensitivity and reproducibility of the assay on developed polymer coated strips was evaluated through a model system using rabbit anti-goat IgG, goat anti-rabbit IgG and goat anti-rabbit IgG HRP (horseradish peroxidase)-conjugate. Polymer coating with GMA-NVP mol% ratio of 78:22 was able to detect rabbit anti-goat IgG antibody at a concentration as low as 2 ng mL⁻¹ with 1% BSA as blocking agent using antispecies IgG peroxidase conjugate diluted 1500 times. In the second step, the sensitivity and specificity of the developed system was established with human blood and finally used to identify the source of mosquito blood meal which is an important parameter in epidemiological studies, particularly in determining the role of mosquito in malaria transmission. The time duration of standardized assay with developed polymer coated strips was cut down to one hour compared to the 3-4 h required in usual dot-ELISA.     

Towards immunoassay in whole blood: separationless sandwich-type electrochemical immunoassay based on in-situ generation of the substrate of the labeling enzyme

An 18 minute separationless amperometric ELISA-type sandwich immunoassay, utilizing only stable reagents and having no washing steps is described. The platform for the assay was an electron conducting redox hydrogel on a vitreous carbon electrode. Avidin and choline oxidase were co-immobilized on the redox hydrogel and the biotinylated antibody to the antigen to be assayed (the biotin-labeled F(ab′)₂ fragment of goat anti-rabbit IgG) was bound to the gel. When the antigen (goat anti-rabbit IgG) was present in the analyzed solution, then its binding to the immobilized antibody made the electrode receptive to the complementary peroxidase-labeled antibody (horseradish peroxidase-labeled F(ab′)₂ fragment of goat anti-rabbit IgG). Its binding resulted in electrical contact (“wiring”) of the horseradish peroxidase label to the redox hydrogel, and converted the non-catalytic hydrogel into an electrocatalyst for the reduction of hydrogen peroxide to water at –0.07 V (SCE) and resulted in the flow of a cathodic current. The electroreduced hydrogen peroxide was not added to the solution and was therefore not significantly accessible to hydrogen peroxide decomposing agents such as catalase. Instead, it was generated within the coating of the electrode through reacting dissolved choline with oxygen. This reaction was catalyzed by the immobilized choline oxidase. The reaction centers of choline oxidase, unlike those of horseradish peroxidase, are not connected to the electrode by the redox hydrogel.     

Antibody-biotemplated HgS nanoparticles: extremely sensitive labels for atomic fluorescence spectrometric immunoassay

In this work, antibody goat anti-human IgG as a scaffold was employed for the synthesis and biofunctionalization of HgS nanoparticles (NPs) via a facile one-pot process. After a complete sandwich-type immunoreaction among primary antibody, human IgG and secondary antibody labeled with HgS NPs, a large number of mercury ions released from captured HgS NPs dissolution were quantitatively detected by chemical vapor generation atomic fluorescence spectrometry (CVG-AFS). Taking advantage of the signal amplification property of HgS NPs and the high sensitivity of CVG-AFS, the assay detected human IgG with a limit of detection (S/N = 3) of 0.6 ng mL(-1) (4.0 fmol mL(-1) or 0.4 fmol) and the response was linear over a dynamic range from 1.0 to 5.0 × 10(4) ng mL(-1) with a correlation coefficient of 0.996. A relative standard deviation (RSD) of 1.0 × 10(2) ng mL(-1) human IgG was 1.5% for within-batch (intra-assay) and 4.5% for between-batch (inter-assay). Other proteins, such as goat anti-rabbit IgG, goat anti-human IgG, rabbit anti-human IgG, carcinoembryonic (CEA), α-fetoprotein (AFP), human serum albumin (HSA) and bovine serum albumin (BSA) did not significantly interfere with the assay for human IgG. The analytical result of HgS NPs with AFS-based immunoassay technology for the quantification of human IgG in human serum from patients is in good agreement with the result obtained by conventional immunoturbidimetric method. The consequence shows that the novel immunosensor possessed satisfactory precision, extremely high sensitivity, high selectivity and could be applied for the quantification analysis of real samples.     

Quantitative measurement of 17 beta-estradiol and estriol in river water by time-resolved fluoroimmunoassay.

A sensitive method for detecting 17 beta-estradiol (E2) and estriol (E3) in river water has been developed, based on the time-resolved fluoroimmunoassay by using a fluorescent europium chelate label, 4,4'-bis(1",1",1",2",2",3",3"-heptafluoro-4",6"-hexanedion-6"-yl)- chlorosulfo-o-terphenyl (BHHCT)-Eu3+. In the E2 assay, microtiter plates were coated with the E2-bovine serum albumin (BSA) conjugate. The anti-17 beta-estradiol antibody, the biotinylated goat anti-rabbit IgG antibody and the BHHCT-Eu3+ labeled streptavidin (SA)-BSA conjugate were used. In the E3 assay, the goat anti-rabbit IgG antibody was coated on a microtiter plate. The anti-estriol antibody and the BHHCT-Eu3+ labeled E3-BSA conjugate were used. The detection limits for E2 and E3 were 2.3 pg/ml and 4.3 pg/ml, respectively, and the analytical recoveries were 95-120%. Quantitative measurement of estrogens in river water was carried out for Kanda River (Tokyo, Japan) by using the method. The E2 and E3 levels were 32 pg/ml and 5.5 pg/ml, respectively. The detection limits of the present method are in the same orders of magnitude as those of ELISA for E2, and are 1-2 orders of magnitude better for E3.     

Sequential injection chemiluminescence immunoassay for anionic surfactants using magnetic microbeads immobilized with an antibody

A rapid and sensitive immunoassay for the determination of linear alkylbenzene sulfonates (LAS) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a neodymium magnet. Magnetic beads, to which an anti-LAS monoclonal antibody was immobilized, were used as a solid support in an immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by means of a neodymium magnet and adjusting the flow of the carrier solution. The immunoassay was based on an indirect competitive immunoreaction of an anti-LAS monoclonal antibody on the magnetic beads and the LAS sample and horseradish peroxidase (HRP)-labeled LAS, and was based on the subsequent chemiluminscence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The anti-LAS antibody was immobilized on the beads by coupling the antibody with the magnetic beads after activation of a carboxylate moiety on the surface of magnetic beads that had been coated with a polylactic acid film. The antibody immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the neodymium magnet, an LAS solution containing HRP-labeled LAS at constant concentration and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photon counting unit located at the upper side of the flow cell by collecting the emitted light with a lens. A typical sigmoid calibration curve was obtained, when the logarithm of the concentration of LAS was plotted against the chemiluminescence intensity using various concentrations of standard LAS samples (0-500 ppb) under optimum conditions. The time required for analysis is less than 15 min.     

Chemiluminescence sequential injection immunoassay for vitellogenin using magnetic microbeads

A rapid and sensitive immunoassay for the determination of carp vitellogenin (Vg) is described. The method involves a sequential injection analysis (SIA) system equipped with a chemiluminescence detector and a samarium-cobalt magnet. An anti-Vg monoclonal antibody, immobilized on magnetic beads, was used as a solid support for the immunoassay. The introduction, trapping and release of the magnetic beads in the flow cell were controlled by a samarium-cobalt magnet and the flow of the carrier solution. The immunoassay was based on a sandwich immunoreaction of anti-Vg monoclonal antibody (primary antibody) on the magnetic beads, Vg, and the anti-Vg antibody labeled with horseradish peroxidase (HRP) (secondary antibody), and was based on a subsequent chemiluminescence reaction of HRP with hydrogen peroxide and p-iodophenol, in a luminol solution. The magnetic beads to which the primary antibody was immobilized were prepared by coupling the primary antibody with the magnetic beads after an agarose-layer on the surface of the magnetic beads was epoxidized. The primary antibody-immobilized magnetic beads were introduced, and trapped in the flow cell equipped with the samarium-cobalt magnet, a Vg sample solution, an HRP-labeled secondary antibody solution and the luminol solution were sequentially introduced into the flow cell based on an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photomultiplier located at the upper side of the flow cell. The optimal incubation times both for the first and second immunoreactions were determined to be 20 min. A concave calibration curve was obtained between Vg concentration and chemiluminescence intensity when various concentrations of standard Vg samples (2–100 ng mL⁻¹) were applied to the SIA system under optimal conditions. In spite of a narrow working range, the lower detection limit of the immunoassay was about 2 ng mL⁻¹.     

Analytical performance of luminescent immunoassays of different format for serum daidzein analysis

Two sensitive competitive-type solid-phase immunoassays for serum daidzein analysis have been developed and optimized. The first is a chemiluminescent enzyme immunoassay that uses black polystyrene microtiter wells in which daidzein-specific antibodies raised in rabbits are immobilized and a daidzein derivative is coupled to horseradish peroxidase (HRP) as a label. The HRP activity of the antibody-bound tracer is measured with an enhanced chemiluminescent system (luminol/H2O2/enhancer). The second immunoassay is based on the use of bovine serum albumin-daidzein derivative immobilized on microtiter plates and a secondary anti-rabbit IgG-Fc fragment conjugated with 4,7-bis(chlorosulfophenyl)-1,10-phenanthroline-2,9-dicarboxylic acid (BCPDA). Formation of the complex Eu3+-BCPDA enables time-resolved fluorescence-mode detection of the amount of antibody bound to the immobilized antigen. Both methods fulfilled all the requirements of accuracy and precision. The detection limit was the same for each method, 10 pg/well; this is better than that of other immunoassays. The specificity of the two methods was different, because of their competitive-type mechanisms. The performance of the chemiluminescence method is better, because the cross-reactivity of the main interfering compound (genistein) was 5%, compared with 25% for the time-resolved fluoroimmunoassay.     

Gold nanoparticle-based immunochromatographic assay for the detection of 7-aminoclonazepam in urine

An analytical system of immunochromatographic assay based on gold nanoparticles was developed for the detection of 7-aminoclonazepam (7-ACLZ) in human urine. The qualitative assay was based on the competitive immunoassay using anti-7-ACLZ polyclonal antibody (PcAb) and a detector reagent that contains colloidal gold particles coated with anti-7-ACLZ PcAb. Nitrocellulose membrane was separately immobilised with goat anti-rabbit IgG (control line) and 7-ACLZ-OVA conjugate (test line). The sensitivity of the strip was tested for detecting 7-ACLZ spiked in urine and each specimen was independently measured by liquid chromatography tandem mass spectrometry. Good correlation was showed by the recovery results. The limit of detection for the strip test in urine was 100 ng mL^?1. The assay can be applied to the rapid detection of 7-ACLZ with the short testing time.     

Analytical performance of luminescent immunoassays of different format for serum daidzein analysis

Two sensitive competitive-type solid-phase immunoassays for serum daidzein analysis have been developed and optimized. The first is a chemiluminescent enzyme immunoassay that uses black polystyrene microtiter wells in which daidzein-specific antibodies raised in rabbits are immobilized and a daidzein derivative is coupled to horseradish peroxidase (HRP) as a label. The HRP activity of the antibody-bound tracer is measured with an enhanced chemiluminescent system (luminol/ H₂O₂/enhancer). The second immunoassay is based on the use of bovine serum albumin–daidzein derivative immobilized on microtiter plates and a secondary anti-rabbit IgG-Fc fragment conjugated with 4,7-bis(chlorosulfophenyl)-1,10-phenanthroline-2,9-dicarboxylic acid (BCPDA). Formation of the complex Eu³⁺-BCPDA enables time-resolved fluorescence-mode detection of the amount of antibody bound to the immobilized antigen. Both methods fulfilled all the requirements of accuracy and precision. The detection limit was the same for each method, 10 pg/ well; this is better than that of other immunoassays. The specificity of the two methods was different, because of their competitive-type mechanisms. The performance of the chemiluminescence method is better, because the cross-reactivity of the main interfering compound (genistein) was 5%, compared with 25% for the time-resolved fluoroimmunoassay.     

A secondary antibody format chemiluminescence immunoassay for the determination of estradiol in human serum

A competitive immunoassay for estradiol (E2) based on secondary antibody format was established. The donkey anti-rabbit IgG was used as the secondary antibody to coat micro-plates, and the horseradish peroxidase (HRP)-luminol-H₂O₂ chemiluminescent system with high sensitivity was chosen as the detection system. The addition of sodium trichloroacetate (CCl₃COONa) in the enzyme buffer as a replaceable packing material can realize directly analysis of E2 in human serum without extraction, which improved reproducibility and resolution of the assay. Additionally, the method showed specific recognition of estrogen, without cross-reaction for the major steroids (estrone (E1), estriol (E3), dihydrotestosterone (DHT), androstenedione, testosterone (T)) commonly found in human serum. The chemiluminescence immunoassay with secondary antibody can be applied to detect E2 with good precision at concentrations as low as 1.48 pg mL⁻¹. The proposed method has been successfully applied to the determination of E2 in 97 human sera and showed a good correlation compared with the commercially radioimmunoassay (RIA) kit with a correlative coefficient of 0.9881. This method has exhibited great potential in the fabrication of diagnostic kit and can be used in the clinical analysis of E2 in human serum.     

A new enzyme immunoassay for a solid Chinese crude drug, pinellia tuber

A new immunoassay for a solid Chinese crude drug was studied. An antiserum specific for Pinellia tuber was elicited in two rabbits. Using the antiserum and powdered Pinellia tuber-coated microtiter plate as the immunological reagents, and beta-D-galactosidase-labeled goat anti-rabbit immunoglobulin G (IgG) as the tracer, a new enzyme immunoassay for a solid Pinellia tuber with a working range between 0.1 and 1000 micrograms/ml was developed. The assay was specific for a solid Pinellia tuber and showed low cross-reaction values on other Chinese crude drugs and the extract of Pinellia tuber. The specificity of the assay was compared with the selected antibody enzyme immunoassay (SAEIA) for the extract of Pinellia tuber recently developed. Both methods utilized the same immunological reagents such as the serum and the enzyme-labeled goat anti-rabbit IgG, and the only difference between them was the solid-phase antigen used. The assay results of several antigens determined by them were quite different, showing that selective measurements of different antigens, either solid or the extract of Pinellia tuber, were possible using the same antiserum, when the tracing reaction in the immunoassay was adequately selected.     

QDs-labeled microspheres for the adsorption of rabbit immunoglobulin G and fluoroimmunoassay

This paper presents a study on the adsorption of rabbit immunoglobulin G onto CdTe quantum dots (QDs)/polystyrene microspheres. The adsorption appears to be sensitive to pH conditions and ionic strength. Maximum adsorption for protein was obtained near the isoelectric point. Adsorption isotherm analysis demonstrated that the electrostatic interaction plays an important role in the adsorption of protein. The thickness of adsorbed layer calculated from the maximal adsorption amounts (q(m)) is 6.5 nm, which indicates that the rabbit IgG molecules exist between the side-on and end-on mode in the monolayer. The bio-functional rabbit IgG/fluorescent microspheres were further used for the detection of antibody in fluoroimmunoassays. This approach allowed detection of goat anti-rabbit IgG in the range of 1-100 ng/mL.     

Portable fiber-optic immunosensor for detection of methsulfuron methyl

This fiber optic sensor, based on competitive immunoreactions between coating-haptens and free haptens in solutions with corresponding antibodies, was developed to determine the concentration of the free hapten, methsulfuron-methyl. The ovalbumin (OVA)-methsulfuron-methyl conjugate was immobilized on a microscope slide. Horseradish peroxidase (HRP) labeled goat anti-rabbit IgG was used to generate an optical signal. The portable optical device consisted of a 0.25-W tungsten-halogen light source and a photosensitive diode detector. A typical competitive-binding calibration curve was seen between 0.3 and 100 ng/ml of methsulfuron-methyl. The detection limit for methsulfuron-methyl was 0.1 ng/ml.     

β2-微球蛋白连续表位的免疫亲和质谱研究

采用Endoproteinase Glu-C, Lys-C和Trypsin 3种蛋白酶分别水解β2-微球蛋白, 产生一系列肽段, 利用固定在琼脂糖珠上的单克隆抗体与其发生免疫亲和反应. 利用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF-MS)技术, 对抗原决定簇肽段-抗体复合物进行系统研究, 结果表明, 与抗体结合部位即连续表位的位点为肽段(59~69)(DWSFYLLYYTE). 该研究方法简便、准确, 可用来对其它抗原连续表位的快速测定.     

On-column capture of a specific protein in capillary electrophoresis using magnetic beads

A method for capturing specific molecules separated by CE has been explored. To demonstrate on-column capture of migrating analyte molecules, two detection windows were fabricated on a capillary. Magnetic beads containing immobilized molecules that react with the specific molecules under study were placed between the detection windows in the capillary using magnets. Molecules in a sample solution injected into the capillary were separated and detected at the first detection window. After passing through the first detection window, the separated molecules encountered the magnetic beads, where the specific analyte was captured. As a result, the peak area for those analyte molecules decreased or disappeared completely at the second detection window. Rabbit IgG and carbonic anhydrase were employed to demonstrate on-column capture of a specific molecule. For rabbit IgG, magnetic beads containing the immobilized antibody (anti-rabbit IgG) were used. Rabbit IgG molecules were captured on the magnetic beads during CE migration. Furthermore, the capture of carbonic anhydrase was demonstrated by the reaction between magnetic beads (containing immobilized anti-rabbit IgG) and anti-carbonic anhydrase (rabbit IgG), before the beads were packed in the capillary. After packing the magnetic beads in the capillary, a mixture of two proteins was injected into the capillary. Two proteins were detected at the first detection window, while the peak corresponding to carbonic anhydrase disappeared at the second detection window. The results show that using an appropriate antibody, the present technique would be applicable to any proteins.     

A new strategy for electrochemical immunoassay based on enzymatic silver deposition on agarose beads

A novel, sensitive electrochemical immunoassay in a homogeneously dispersed medium is described herein based on the unique features of agarose beads and the special amplified properties of biometallization. The immunochemical recognition event between human immunoglobulin G (IgG) and goat anti-human IgG antibody is chosen as the model system to demonstrate the proposed immunoassay approach. Avidin-agarose beads rapidly react with the biotinylated goat anti-human IgG antibody to form agarose beads-goat anti-human IgG conjugate (agarose bead-Ab). Agarose bead-Ab, alkaline phosphatase conjugated goat anti-human IgG antibody (ALP-Ab) and the human IgG analyte are mixed to form sandwich-type immunocomplex followed by the addition of the enzymatic silver deposition solution to deposit silver onto the surface of proteins and agarose beads. The silver deposited are dissolved and quantified by anodic stripping voltammetry. The influence of relevant experimental variables was examined and optimized. The logarithm of the anodic stripping peak current depended linearly on the logarithm of the concentration of human IgG in the range from 1 to 1000 ng/ml. A detection limit as low as 0.5 ng/ml human IgG was attained by 3σ-rule. The R.S.D. of the approach is 9.65% for eight times determination of 10 ng/ml human IgG under same conditions. Optical microscope and TEM graphs were also utilized to characterize agarose beads and silver nanoparticles formed.     

Sequential injection chemiluminescence immunoassay for nonionic surfactants by using magnetic microbeads

A rapid and sensitive immunoassay based on a sequential injection analysis (SIA) using magnetic microbeads for the determination of alkylphenol polyethoxylates (APnEOs) is described. An SIA system was constructed from a syringe pump, a switching valve, a flow-through type immunoreaction cell equipped with a photon counting unit and a neodymium magnet. Magnetic beads, to which an anti-APnEOs monoclonal antibody was immobilized, were used as a solid support in an immunoassay. The introduction, trapping and release of the magnetic beads in and from the immunoreaction cell were controlled by means of a neodymium magnet and adjusting the flow of a carrier solution. The immunoassay was based on an indirect competitive immunoreaction of an anti-APnEOs monoclonal antibody immobilized on the magnetic beads with a sample APnEOs and a horseradish peroxidase (HRP)-labeled APnEOs in the same sample solution, and was based on the subsequent chemiluminscence reaction of HRP on the magnetic microbeads with a luminol solution containing hydrogen peroxide and p-iodophenol. The anti-APnEOs antibody was immobilized on the magnetic microbeads by coupling the antibody with the magnetic beads after activation of a carboxylate moiety on the surface of the magnetic beads that had been coated with a polylactic acid film. The antibody immobilized magnetic beads were introduced in the immunoreaction cell and trapped in it by the neodymium magnet, which was equipped beneath the immunoreaction cell. An APnEOs sample solution containing the HRP-labeled APnEOs at a constant concentration, and a luminol solution containing hydrogen peroxide and p-iodophenol were sequentially introduced into the immunoreaction cell, according to an SIA programmed sequence. Chemiluminescence emission was monitored by means of a photon counting unit located at the upper side of the immunoreaction cell by collecting the emitted light with a lens. A typical sigmoidal calibration curve was obtained, when the logarithm of the concentration of APnEOs was plotted against the chemiluminescence intensity as the number of photons in 100 ms using standard APnEOs sample solutions at various concentrations (0–1000 ppb) under optimum conditions. The lower detection limit defined as IC₈₀ is ca 10 ppb. The time required for analysis is less than 15 min per a sample. The present method was successfully applied to the determination of APnEOs in river water.