MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries

Two‐dimensional (2D) heterostructured materials, combining the collective advantages of individual building blocks and synergistic properties, have spurred great interest as a new paradigm in materials science. The family of 2D transition‐metal carbides and nitrides, MXenes, has emerged as an attractive platform to construct functional materials with enhanced performance for diverse applications. Here, we synthesized 2D MoS₂‐on‐MXene heterostructures through in situ sulfidation of Mo₂TiC₂T_x MXene. The computational results show that MoS₂‐on‐MXene heterostructures have metallic properties. Moreover, the presence of MXene leads to enhanced Li and Li₂S adsorption during the intercalation and conversion reactions. These characteristics render the as‐prepared MoS₂‐on‐MXene heterostructures stable Li‐ion storage performance. This work paves the way to use MXene to construct 2D heterostructures for energy storage applications.     

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator

We demonstrate that an ordered 2D perovskite can significantly boost the photoelectric performance of 2D/3D perovskite heterostructures. Using selective fluorination of phenyl-ethyl ammonium (PEA) lead iodide to passivate 3D FA_0.8Cs_0.2PbI₃, we find that the 2D/3D perovskite heterostructures passivated by a higher ordered 2D perovskite have lower Urbach energy, yielding a remarkable increase in photoluminescence (PL) intensity, PL lifetime, charge-carrier mobilities (ϕμ), and carrier diffusion length (L_D) for a certain 2D perovskite content. High performance with an ultralong PL lifetime of ≈1.3 μs, high ϕμ of ≈18.56 cm² V⁻¹ s⁻¹, and long L_D of ≈7.85 μm is achieved in the 2D/3D films when passivated by 16.67 % para-fluoro-PEA₂PbI₄. This carrier diffusion length is comparable to that of some perovskite single crystals (>5 μm). These findings provide key missing information on how the organic cations of 2D perovskites influence the performance of 2D/3D perovskite heterostructures.     

Molecular Ligand-Mediated Assembly of Multicomponent Nanosheet Superlattices for Compact Capacitive Energy Storage

Inspired by the self-assembly of nanoparticle superlattices, we report a general method that exploits long-chain molecular ligands to induce ordered assembly of colloidal nanosheets (NSs), resulting in 2D laminate superlattices with high packing density. Co-assembly of two types of NSs further enables 2D/2D heterostructured superlattices. As a proof of concept, co-assembly of Ti₃C₂T_x and graphene oxide (GO) NSs followed by thermal annealing leads to MXene-rGO superlattices with tunable microstructures, which exhibit significantly higher capacitance than their filtrated counterparts, delivering an ultrahigh volumetric capacitance of 1443 F cm⁻³ at 2 mV s⁻¹. Moreover, the as-fabricated binder-free symmetric supercapacitors show a high volumetric energy density of 42.1 Wh L⁻¹, which is among the best reported for MXene-based materials in aqueous electrolytes. This work paves the way toward rational design of 2D material-based superstructures for energy applications.     

ZnO/ZnS Heterostructured Nanorod Arrays and Their Efficient Photocatalytic Hydrogen Evolution

Semiconducting heterostructures have been widely applied in photocatalytic hydrogen evolution due to their variable band gaps and high energy conversion efficiency. As typical semiconducting heterostructures, ZnO/ZnS heterostructured nanorod arrays (HNRAs) have been obtained through a simple anion‐exchange process in this work. Structural characterization indicates that the heterostructured nanorods (HNRs) are all composed of hexagonal wurtzite ZnO core and cubic zinc‐blende ZnS shell. As expected, the as‐obtained one‐dimensional heterostructures not only lower the energy barrier but also enhance the separation ability of photogenerated carriers in photocatalytic hydrogen evolution. Through comparisons, it is found that 1D ZnO/ZnS HNRAs exhibit much better performance in photocatalytic hydrogen evolution than 1D ZnO nanorod arrays (NRAs) and 1D ZnS NRAs. The maximum H₂ production is 19.2 mmol h^?1 for 0.05 g catalyst under solar‐simulated light irradiation at 25 °C and the corresponding quantum efficiency is 13.9 %, which goes beyond the economical threshold of photocatalytic hydrogen evolution technology.     

Template-free assembly of 2D-electrolytes into nanofibres

The assembly of graphene-based materials into nanofibres is of intense technological interest for numerous applications ranging from tissue engineering and drug delivery to fuel cells and space elevators. We demonstrate a composite nanofibre synthesis process using functionalised graphene structures in liquid medium (two-dimensional [2D] electrolytes) as building blocks. The approach consists in simultaneous scrolling and reacting 2D electrolytes, leading to a dimensional reduction of 2D materials into one-dimensional nanostructures. The spontaneous self-assembly and cross-linking processes allow to produce nanofibres without the need of fibrillation techniques, such as wet-spinning or external templates.     

Facile Electrospinning of CeO2/Bi2WO6 Heterostructured Nanofibers with Excellent Visible‐light‐driven Photocatalytic Performance

One‐dimensional (1D) CeO₂/Bi₂WO₆ heterostructured nanofibers with a diameter of about 300 nm were successfully synthesized by using a straightforward strategy combining an electrospinning technique with a sintering process. The acquired products were characterized by thermogravimetric and differential scanning calorimetric (TG‐DSC), Fourier transform infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area measurements, and UV/Vis spectroscopy. The obtained CeO₂/Bi₂WO₆ heterostructured nanofibers exhibited an excellent photocatalytic property for the degradation of Rhodamine B (RhB) dye driven by visible light due to the promoted separation of photoelectrons and holes and the large contact area between the photocatalyst and organic pollutant.     

Supramolecularly Bonded Layered Heterostructures Exhibiting HER Activity

van der Waals heterostructures formed by 2D materials have attracted much attention in the last few years. Recently, 2D nanosheets linked by covalent bonds have been found to exhibit novel properties. In the present study we have investigated supramolecular layered heterostructures formed by nanosheets of MoS₂ with BC₇N, g‐C₃N₄ and graphene. These materials have been synthesized via a non‐covalent host–guest synthetic design using cucurbit[8]uril (CB[8]) hosts. In addition to offering reversible disassembly, these heterostructures show good visible‐light‐driven hydrogen evolution reaction (HER) activity as well as reasonable gas adsorption and other properties.     

Two-dimensional heterostructures built from ultrathin CeO2 nanosheet surface-coordinated and confined metal–organic frameworks with enhanced stability and catalytic performance

Two-dimensional (2D) metal–organic framework (MOF) based heterostructures will be greatly advantageous to enhance catalytic performance because they increase the contact surface and charge transfer. Herein, a novel 2D heterostructure named CeO₂@NiFe-MOFs, in which monolayer NiFe-MOFs is coordinated with ceria (CeO₂) to improve catalytic and stability performance, is successfully constructed by the strategy of in situ growth on the surface of ultrathin CeO₂ nanosheets being functionalized with monolayer carboxylic acid groups. The 2D heterostructure possesses a sandwich structure, where monolayer NiFe-MOFs are coordinated to both the top and bottom surface of CeO₂ nanosheets via joining carboxylic acid groups. In particular, CeO₂ with robust coordination plays a significant role in the anchoring of carboxylic acid groups and binding strength of heterostructures. The 2D CeO₂@NiFe-MOF heterostructure with a joint effect of metal–ligand coordination not only presents good structural stability but also significantly enhances the oxygen evolution reaction (OER) efficiencies in comparison to bare NiFe-MOFs, achieving a current density of 20 mA cm⁻² at a low overpotential of 248 mV as well as durability for at least 40 h. Meanwhile, the electronics, optics, band gap energy and local strains of CeO₂ decorated with 2D NiFe-MOFs are different to the properties of bare CeO₂. Our study on the construction of an ultrathin CeO₂ surface-coordinated and confined MOF layer may pave a new way for novel 2D MOF composites/heterostructures or multi-functional 2D CeO₂ materials to be used in energy conversion or other fields.

A synthetic strategy to prepare 2D heterostructures from ultrathin CeO₂ surface-coordinated metal–organic framework was proposed, proving multiple effects of metal-coordinated interactions in 2D heterostructures.     

Covalent Cross-Linking of 2H-MoS2 Nanosheets

The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS₂–MoS₂ homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS₂ sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.     

Electrochemical Properties of Fiber‐in‐Tube‐ and Filled‐Structured TiO2 Nanofiber Anode Materials for Lithium‐Ion Batteries

Phase‐pure anatase TiO₂ nanofibers with a fiber‐in‐tube structure were prepared by the electrospinning process. The burning of titanium‐oxide‐carbon composite nanofibers with a filled structure formed as an intermediate product under an oxygen atmosphere produced carbon‐free TiO₂ nanofibers with a fiber‐in‐tube structure. The sizes of the nanofiber core and hollow nanotube were 140 and 500 nm, respectively. The heat treatment of the electrospun nanofibers at 450 and 500 °C under an air atmosphere produced grey and white filled‐structured TiO₂ nanofibers, respectively. The initial discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 231, 134, and 223 mA h g^?1, respectively, and their corresponding charge capacities were 170, 100, and 169 mA h g^?1, respectively. The 1000th discharge capacities of the TiO₂ nanofibers with the fiber‐in‐tube and filled structures and the commercial TiO₂ nanopowders were 177, 64, and 101 mA h g^?1, respectively, and their capacity retentions measured from the second cycle were 89, 82, and 52 %, respectively. The TiO₂ nanofibers with the fiber‐in‐tube structure exhibited low charge transfer resistance and structural stability during cycling and better cycling and rate performances than the TiO₂ nanofibers with filled structures and the commercial TiO₂ nanopowders.     

A Multi-Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High-Rate and Long-Life Lithium-Ion Batteries

Multi-wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire-in-double-wall-tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin-based electrode materials caused by volume expansion. Even after 2000 cycles, the wire-in-double-wall-tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g⁻¹ (1 A g⁻¹) and still maintains 508.2 mAh g⁻¹ at high current density of 5 A g⁻¹. This outstanding electrochemical performance suggests the multi-wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Electrochemical oxidation of phenol on boron-doped diamond electrode

The process of phenol oxidation on a boron-doped diamond electrode (BDD) is studied in acidic electrolytes under different conditions of generation of active oxygen forms (AOFs). The scheme of phenol oxidation known from the literature for other electrode materials is confirmed. Phenol is oxidized through a number of intermediates (benzoquinone, carboxylic acids) to carbon dioxide and water. Comparative analysis of phenol oxidation rate constants is performed as dependent on the electrolysis conditions: direct anodic oxidation, with oxygen bubbling, and addition of H₂O₂. A scheme is confirmed according to which active radicals (OH^·, HO₂^·, HO₂⁻) are formed on a BDD anode that can oxidize the substrate which leads to formation of organic radicals interacting with each other and forming condensation products. Processes with participation of free radicals (chain-radical mechanism) play an important role in electrochemical oxidation on BDD. Intermediates and polymeric substances (polyphenols, quinone structures, and resins) are formed. An excess of the oxidant (H₂O₂) promotes a more effective oxidation of organic radicals and accordingly inhibition of the condensation process.     

CsVO2F(IO3): An Excellent SHG Material Featuring an Unprecedented 3D [VO2F(IO3)]− Anionic Framework

The first alkali‐metal vanadium iodate fluoride, CsVO₂F(IO₃), with a novel 3D anionic framework, has been rationally designed and hydrothermally synthesized. The 3D [VO₂F(IO₃)]^? framework in CsVO₂F(IO₃) is built from 0D Λ‐shaped cis‐[VO₃F(IO₃)₂]^4? polyanions via corner‐sharing of oxo anions and bridging of the iodate groups. CsVO₂F(IO₃) displays both a strong second‐harmonic generation (SHG) 1.1 times as strong as KTiOPO₄ (KTP) under 2.05 μm laser radiation and high laser‐induced damage threshold (LIDT) of 107.9 MW cm^?2. This work provides a new route to design SHG crystals with stable 3D anionic structures from low‐dimensional structural building units.     

Thermal and morphological study of Al2O3 nanofibers derived from boehmite precursor

The boehmite nanofibers were prepared by using NaAlO₂ and Al₂(SO₄)₃ as the starting materials without any surfactant. The phase transitions of the boehmite nanofibres against different temperature were studied and various phases were derived from well-crystallized boehmite nanofibers. All these phases had the same morphology even after high temperature calcination. In addition, the retention of specific surface area of the samples were very high because of the limited aggregation occurred in calcinations for each sample. For instance, the ??-Al₂O₃ obtained at 500?°C had the specific surface area (208.56?m²/g) with an average pore diameter of 6.0?nm. With the further increase of the calcination temperature, the nanofibers became shorter and coarsening, which resulted in the decrease of the specific surface area. It is worthwhile to notice that the BET surface areas (40.97?m²/g) and the pore volume (0.27?cm³/g) of the fibrous structures obtained after 1200?°C calcination are substantially higher than that of the non-fibrous alumina because of the morphology maintenance.     

Preparation of Conducting Composite Materials Based on Polymer Nanofibers and Polypyrrole

Conducting materials based on polypyrrole-modified nanofibers of polylactides of different molecular masses and copolymers of ε-caprolactam (–NH–(CH₂)₅–CO–) and hexamethylenediamine adipate (–H(CH₂)₆NHCO(CH₂)₄CO–) were prepared. As shown by scanning electron microscopy, oxidative polymerization of pyrrole on the polymer nanofiber matrix depends on the nanofib er hydrophilicity. The heterophase synthesis of polypyrrole on the surface of hydrophilic nanofibers of the aliphatic copolyamide allowed uniform coating of the material surface with polypyrrole nanoparticles. The surface resistivity of the composite material was about 0.4 kΩ sq^–1.     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

Hydrogen-bonded LC nanocomposites: characterisation of nanoparticle-LC interactions by solid-state NMR and FTIR spectroscopies

Although the molecular-level nanoparticle-liquid crystal (NP-LC) interactions are key for forming stable NP dispersions in LC, characterisation of these interactions is scarce in the literature. Recently, we have developed hydrogen-bonded LC nanocomposites based on mesogenic carboxylic acids and NPs functionalised with hydrogen-bond acceptor/donor groups. Here, we apply solid-state ¹H and ¹³C NMR and Fourier transform infrared spectroscopies to model systems consisting of mixtures of trans-4-n-butylcyclohexanecarboxylic acid (4-BCHA), 4-hexylbenzoic acid (6BA) and 4,4?-bipyridine. The binary mixture, 4-BCHA:6BA, was also studied. The results were compared to monolayer quantities of 6BA and 4-BCHA adsorbed on pyridine functionalised zirconia NPs (ZrO₂-n₃-pyridine) to understand the different effects of the functionalised NPs on the LC properties.     

Recent advances in heterostructured cathodic electrocatalysts for non-aqueous Li–O2 batteries

Developing efficient energy storage and conversion applications is vital to address fossil energy depletion and global warming. Li–O₂ batteries are one of the most promising devices because of their ultra-high energy density. To overcome their practical difficulties including low specific capacities, high overpotentials, limited rate capability and poor cycle stability, an intensive search for highly efficient electrocatalysts has been performed. Recently, it has been reported that heterostructured catalysts exhibit significantly enhanced activities toward the oxygen reduction reaction and oxygen evolution reaction, and their excellent performance is not only related to the catalyst materials themselves but also the special hetero-interfaces. Herein, an overview focused on the electrocatalytic functions of heterostructured catalysts for non-aqueous Li–O₂ batteries is presented by summarizing recent research progress. Reduction mechanisms of Li–O₂ batteries are first introduced, followed by a detailed discussion on the typical performance enhancement mechanisms of the heterostructured catalysts with different phases and heterointerfaces, and the various heterostructured catalysts applied in Li–O₂ batteries are also intensively discussed. Finally, the existing problems and development perspectives on the heterostructure applications are presented.

The structure–function relationships between heterostructures and their catalytic properties were discussed in detail, and the challenges and improvement strategies for heterostructure based cathodes towards Li–O₂ catalysis were also summarized.     

Designed Synthesis of van der Waals Heterostructures: The Power of Kinetic Control

Selecting specific 2D building blocks and specific layering sequences of van der Waals heterostructures should allow the formation of new materials with designed properties for specific applications. Unfortunately, the synthetic ability to prepare such structures at will, especially in a manner that can be manufactured, does not exist. Herein, we report the targeted synthesis of new metal–semiconductor heterostructures using the modulated elemental‐reactant technique to nucleate specific 2D building blocks, control their thickness, and avoid epitaxial structures with long‐range order. The building blocks, VSe₂ and GeSe₂, have different crystal structures, which inhibits cation intermixing. The precise control of this approach enabled us to synthesize heterostructures containing GeSe₂ monolayers alternating with VSe₂ structural units with specific sequences. The transport properties systematically change with nanoarchitecture and a charge‐density wave‐like transition is observed.