Separate and simultaneous enzymatic hydrolysis and fermentation of wheat hemicellulose with recombinant xylose utilizing Saccharomyces cerevisiae

Fermentations with three different xylose-utilizing recombinant Saccharomyces cerevisiae strains (F12, CR4, and CB4) were performed using two different wheat hemicellulose substrates, unfermented starch free fibers, and an industrial ethanol fermentation residue, vinasse. With CR4 and F12, the maximum ethanol concentrations obtained were 4.3 and 4 g/L, respectively, but F12 converted xylose 15% faster than CR4 during the first 24 h. The comparison of separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) with F12 showed that the highest, maximum ethanol concentrations were obtained with SSF. In general, the volumetric ethanol productivity was initially, highest in the SHF, but the overall volumetric ethanol productivity ended up being maximal in the SSF, at 0.013 and 0.010 g/Lh, with starch free fibers and vinasse, respectively.     

Effect of Initial Particle Size and Densification on AFEX-Pretreated Biomass for Ethanol Production

Switchgrass (SG), corn stover (CS), and prairie cordgrass (PCG) pretreated with ammonia fiber expansion (AFEX) were densified using a novel low-temperature, low-pressure densification method. Simultaneous saccharification and fermentation (SSF) and separate hydrolysis and fermentation (SHF) were performed with loose and densified AFEX-treated biomass to determine the effect of post-AFEX densification. Biomass particle size reduction before pretreatment increased 144-h SSF ethanol yields from densified material by 8–9 % although no significant differences were seen in the first 72 h. Grinding material after densification had no impact on final ethanol yields but increased production rates in the first 24–48 h. Low-pressure, post-AFEX densification had no adverse effects on SSF ethanol yields from SG or CS but reduced yields from densified PCG by 16 %. Glucose concentrations after hydrolysis (SHF) showed similar trends. Ethanol yields after SHF, however, showed that densification had no significant impact on CS or PCG but reduced final ethanol yields from SG.     

Ethanol production from corn starch in a fluidized-bed bioreactor

The production of ethanol from industrial dry-milled corn starch was studied in a laboratory-scale fluidized-bed bioreactor using immobilized biocatalysts. Saccharification and fermentation were carried out either simultaneously or separately. Simultaneous saccharification and fermentation (SSF) experiments were performed using small, uniform κ-carrageenan beads (1.5–2.5 mm in diameter) of co-immobilized glucoamylase and Zymomonas mobilis. Dextrin feeds obtained by the hydrolysis of 15% drymilled corn starch were pumped through the bioreactor at residence times of 1.5–4h. Single-pass conversion of dextrins ranged from 54–89%, and ethanol concentrations of 23–36 g/L were obtained at volumetric productivities of 9–15 g/L-h. Very low levels of glucose were observed in the reactor, indicating that saccharification was the rate-limiting step. In separate hydrolysis and fermentation (SHF) experiments, dextrin feed solutions of 150–160 g/L were first pumped through an immobilized-glucoamylase packed column. At 55°C and a residence time of 1 h, greater than 95% conversion was obtained, giving product streams of 162–172 g glucose/L. These streams were then pumped through the fluidized-bed bioreactor containing immobilized Z. mobilis. At a residence time of 2 h, 94% conversion and ethanol concentration of 70 g/L were achieved, resulting in an overall process productivity of 23 g/L-h. Atresidence times of 1.5 and 1 h, conversions of 75 and 76%, ethanol concentrations of 49 and 47 g/L, and overall process productivities of 19 and 25 g/L-h, respectively, were achieved.     

Optimization of Saccharification and Fermentation Process in Bioethanol Production from Oil Palm Fronds

Oil Palm Frond (OPF) is one of lignocellulosic biomass, which can be utilized as raw material for bioethanol production. Bioethanol is produced as alternative energy to substitute gasoline. There are four steps in bioethanol production from OPF, i.e pretreatement, saccharification, fermentation and purification process. In this study, optimization of saccharification and fermentation process for OPF was investigated. Two methods and the variations of enzyme concentration were carried out in the saccharification and fermentation process. Separate hydrolysis and fermentation process (SHF) and simultaneous saccharification and fermentation process (SSF) were conducted to produce ethanol optimally. Variations of enzyme concentration used in this process were 10, 20, 30 and 40 FPU/g substrate. The result shows that the highest ethanol concentration can be obtained in SSF process with 30 FPU/g substrate of enzyme concentration. The process produced 59.20 g/L ethanol (95.95% yield ethanol) at 96 h of SSF process.     

Effect of Resistant Starch on Hydrolysis and Fermentation of Corn Starch for Ethanol

Starch samples with 0% or 30% amylose were subjected to four different liquefaction enzyme treatments (at various temperature and pH conditions) followed by simultaneous saccharification and fermentation (SSF). Resistant starch (RS) measurements were conducted for the initial starch sample, after liquefaction and after SSF. Initial RS was higher for 30% amylose starch samples (16.53 g/100 g sample) compared with 0% amylose (0.76 g/100 g sample). Higher initial RS resulted in lower conversion of starch into sugars and lower final ethanol yields. The four enzymes hydrolyzed RS, but in varying amounts. Higher temperature liquefaction hydrolyzed a larger portion of RS, resulting in higher ethanol concentrations and lower final residual solids (non-fermentables), whereas lower temperature liquefaction hydrolyzed a smaller portion of RS and resulted in lower ethanol concentrations and higher final residual solids. Decreases in resistant starch after high temperature liquefaction were 55% to 74%, whereas low temperature liquefaction decreases were 11% to 43%. For all enzyme treatments, RS content of starch samples decreased further after SSF.     

Fumaric Acid Production from Alkali-Pretreated Corncob by Fed-Batch Simultaneous Saccharification and Fermentation Combined with Separated Hydrolysis and Fermentation at High Solids Loading

Production of fumaric acid from alkali-pretreated corncob (APC) at high solids loading was investigated using a combination of separated hydrolysis and fermentation (SHF) and fed-batch simultaneous saccharification and fermentation (SSF) by Rhizopus oryzae. Four different fermentation modes were tested to maximize fumaric acid concentration at high solids loading. The highest concentration of 41.32 g/L fumaric acid was obtained from 20 % (w/v) APC at 38 °C in the combined SHF and fed-batch SSF process, compared with 19.13 g/L fumaric acid in batch SSF alone. The results indicated that a combination of SHF and fed-batch SSF significantly improved production of fumaric acid from lignocellulose by R. oryzae than that achieved with batch SSF at high solids loading.     

Simultaneous saccharification and fermentation of lignocellulose

Simultaneous saccharification and fermentation (SSF) processes for producing ethanol from lignocellulose are capable of improved hydrolysis rates, yields, and product concentrations compared to separate hydrolysis and fermentation (SHF) systems, because the continuous removal of the sugars by the yeasts reduces the end-product inhibition of the enzyme complex. Recent experiments using Genencor 150L cellulase and mixed yeast cultures have produced yields and concentrations of ethanol from cellulose of 80% and 4.5%, respectively. The mixed culture was employed because B.clausenii has the ability to ferment cellobiose (further reducing end-product inhibition), while the brewing yeastS. cerevisiae provides a robust ability to ferment the monomeric sugars. These experimental results are combined with a process model to evaluate the economics of the process and to investigate the effect of alternative processes, conditions, and organisms.     

Ethanol Production from the Organic Fraction Obtained After Thermal Pretreatment of Municipal Solid Waste

In this work, the use of organic fraction from municipal solid waste (MSW) as substrate for ethanol production based on enzymatic hydrolysis was evaluated. MSW was subjected to a thermal pretreatment (active hygienization) at 160?°C from 5 to 50 min. The organic fiber obtained after 30 min was used as substrate in a simultaneous saccharification and fermentation (SSF) and fed-batch SSF process using cellulases and amylases. In a fed-batch mode with 25% (w/w) substrate loading, final ethanol concentration of 30 g/L was achieved (60% of theoretical). In these conditions, more than 160 L of ethanol per ton of dry matter could be produced from the organic fraction of MSW.     

Production of Ethanol and Feed by High Dry Matter Hydrolysis and Fermentation of Palm Kernel Press Cake

Palm kernel press cake (PKC) is a residue from palm oil extraction presently only used as a low protein feed supplement. PKC contains 50% fermentable hexose sugars present in the form of glucan and mainly galactomannan. This makes PKC an interesting feedstock for processing into bioethanol or in other biorefinery processes. Using a combination of mannanase, β-mannosidase, and cellulases, it was possible without any pretreatment to hydrolyze PKC at solid concentrations of 35% dry matter with mannose yields up to 88% of theoretical. Fermentation was tested using Saccharomyces cerevisiae in both a separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) setup. The hydrolysates could readily be fermented without addition of nutrients and with average fermentation yields of 0.43?±?0.02 g/g based on consumed mannose and glucose. Employing SSF, final ethanol concentrations of 70 g/kg was achieved in 216 h, corresponding to an ethanol yield of 70% of theoretical or 200 g ethanol/kg PKC. Testing various enzyme mixtures revealed that including cellulases in combination with mannanases significantly improved ethanol yields. Processing PKC to ethanol resulted in a solid residue enriched in protein from 17% to 28%, a 70% increase, thereby potentially making a high-protein containing feed supplement.     

Mathematical modeling of cellulose conversion to ethanol by the simultaneous saccharification and fermentation process

Ethanol, a promising alternative fuel, can be produced by the simultaneous saccharification and fermentation (SSF) of lignocellulosic biomass, which combines the enzymatic hydrolysis of cellulose to glucose and the fermentation of glucose to ethanol by yeast in a single step.

A mathematical model that depicts the kinetics of SSF has been developed based on considerations of the quality of the substrate and enzyme, and the substrate-enzyme-microorganism interactions. Critical experimentation has been performed in conjunction with multiresponse nonlinear regression analysis to determine key model parameters regarding cell growth and ethanol production. The model will be used for rational SSF optimization and scale-up.

     

Parameter Estimation for Simultaneous Saccharification and Fermentation of Food Waste Into Ethanol Using Matlab Simulink

The increase in waste disposal and energy costs has provided an incentive to convert carbohydrate-rich food waste streams into fuel. For example, dining halls and restaurants discard foods that require tipping fees for removal. An effective use of food waste may be the enzymatic hydrolysis of the waste to simple sugars and fermentation of the sugars to ethanol. As these wastes have complex compositions which may change day-to-day, experiments were carried out to test fermentability of two different types of food waste at 27 degrees C using Saccharomyces cerevisiae yeast (ATCC4124) and Genencor's STARGEN enzyme in batch simultaneous saccharification and fermentation (SSF) experiments. A mathematical model of SSF based on experimentally matched rate equations for enzyme hydrolysis and yeast fermentation was developed in Matlab Simulink. Using Simulink parameter estimation 1.1.3, parameters for hydrolysis and fermentation were estimated through modified Michaelis-Menten and Monod-type equations with the aim of predicting changes in the levels of ethanol and glycerol from different initial concentrations of glucose, fructose, maltose, and starch. The model predictions and experimental observations agree reasonably well for the two food waste streams and a third validation dataset. The approach of using Simulink as a dynamic visual model for SSF represents a simple method which can be applied to a variety of biological pathways and may be very useful for systems approaches in metabolic engineering in the future.     

Pretreatment of corn stover by soaking in aqueous ammonia

Soaking in aqueous ammonia (SAA) was investigated as a pretreatment method for corn stover. In this method, the feedstock was soaked in aqueous ammonia over an extended period (10–60 d) at room temperature. It was done without agitation at atmospheric pressure. SAA treatment removed 55–74% of the lignin, but retained nearly 100% of the glucan and 85% of the xylan. The xylan remaining in the corn stover after SAA treatment was hydrolyzed along with the glucan by xylanase present in the Spezyme CP enzyme. In the simultaneous saccharification and fermentation (SSF) test of SAA-treated corn stover, using S. cerevisiae (D₅A), an ethanol yield of 73% of theoretical maximum was obtained on the basis of the glucan content in the treated corn stover. The accumulation of xylose in the SSF appears to inhibit the cellulase activity on glucan hydrolysis, which limits the yield of ethanol. In the simultaneous saccharification and co-fermentation (SSCF) test, using recombinant E. coli (KO11), both the glucan and xylose were effectively utilized, resulting in on overall ethanol yield of 77% based on the glucan and xylan content of the substrate. When the SSCF process is used, the fact that the xylan fraction is retained during pretreatment is a desirable feature since the overall bioconversion can be carried out in a single step without separate recovery of xylose from the pretreatment liquid.     

Polish Varieties of Industrial Hemp and Their Utilisation in the Efficient Production of Lignocellulosic Ethanol

Nowadays, more and more attention is paid to the development and the intensification of the use of renewable energy sources. Hemp might be an alternative plant for bioenergy production. In this paper, four varieties of Polish industrial hemp (Białobrzeskie, Tygra, Henola, and Rajan) were investigated in order to determine which of them are the most advantageous raw materials for the effective production of bioethanol. At the beginning, physical and chemical pretreatment of hemp biomass was carried out. It was found that the most effective is the alkaline treatment with 2% NaOH, and the biomasses of the two varieties were selected for next stages of research: Tygra and Rajan. Hemp biomass before and after pretreatment was analyzed by FTIR and SEM, which confirmed the effectiveness of the pretreatment. Next, an enzymatic hydrolysis process was carried out on the previously selected parameters using the response surface methodology. Subsequently, the two approaches were analyzed: separated hydrolysis and fermentation (SHF) and a simultaneous saccharification and fermentation (SSF) process. For Tygra biomass in the SHF process, the ethanol concentration was 10.5 g∙L⁻¹ (3.04 m³·ha⁻¹), and for Rajan biomass at the SSF process, the ethanol concentration was 7.5 g∙L⁻¹ (2.23 m³·ha⁻¹). In conclusion, the biomass of Polish varieties of hemp, i.e., Tygra and Rajan, was found to be an interesting and promising raw material for bioethanol production.     

Effect of surfactants and zeolites on simultaneous saccharification and fermentation of steam-exploded poplar biomass to ethanol

In this work, the effect of the addition of different concentrations of Tween-80 and three different zeolite-like products on enzymatic hydrolysis, ethanol fermentation, and simultaneous saccharification and fermentation (SSF) process has been investigated. The ability of these products to enhance the effectiveness of the SSF process to ethanol of steam-exploded poplar biomass using the thermotolerant strainKluyveromyces marxianus EMS-26 has been tested. Tween-80 (0.4 g/L) increased enzymatic hydrolysis yield by 20% when compared to results obtained in hydrolysis in absence of the additive. Zeolite-like products (ZESEP-56 and ZECER-56) (2.5 g/L) improved rates of conversion and ethanol yields in the fermentation of liquid fraction recovered from steam-exploded poplar. The periods required for the completion of fermentation were approx 10 h in the presence of zeolite-like products and 24 h in the absence of additives. The probable mode of action is through lowered levels of inhibitory substances because of adsorption by the additive.     

Design and Evaluation of an Optimal Controller for Simultaneous Saccharification and Fermentation Process

Ethanol from corn is produced using dry grind corn process in which simultaneous saccharification and fermentation (SSF) is one of the most critical unit operations. In this work an optimal controller based on a previously validated SSF model was developed by formulating the SSF process as a Bolza problem and using gradient descent methods. Validation experiments were performed to evaluate the performance of optimal controller under different process disturbances that are likely to occur in practice. Use of optimal control algorithm for the SSF process resulted in lower peak glucose concentration, similar ethanol yields (13.38±0.36% v/v and 13.50±0.15% v/v for optimally controlled and baseline experiments, respectively). Optimal controller improved final ethanol concentrations as compared to process without optimal controller under conditions of temperature (13.35±1.28 and 12.52±1.19% v/v for optimal and no optimal control, respectively) and pH disturbances (12.65±0.74 and 11.86±0.49% v/v for optimal and no optimal control, respectively). Cost savings due to lower enzyme usage and reduced cooling requirement were estimated to be up to $1 million for a 151 million L/yr (40 million gal/yr) dry grind plant.     

Recirculation of process streams in fuel ethanol production from softwood based on simultaneous saccharification and fermentation

The effect of process stream recirculation on ethanol production from steam- pretreated softwood based on simultaneous saccharification and fermentation (SSF) was investigated for two process configurations. In the first configuration, a part of the stillage stream after distillation was recycled and, in the second configuration, the liquid after SSF was recycled. The aim was to minimize the energy consumption in the distillation of the fermentation broth and in the evaporation of the stillage, as well as the use of fresh water. However, recirculation leads to an increased concentration of nonvolatiles in the first configuration, and of both volatiles and nonvolatiles in the second configuration. These substances might be inhibitory to the enzymes and the yeast in SSF. When 60% of the fresh water was replaced by stillage, the ethanol yield and the productivity were the same as for the configuration without recirculation. The ethanol production cost was reduced by 17%. In the second configuration, up to 40% of the fresh water could be replaced without affecting the final ethanol yield, although the initial ethanol productivity decreased. The ethanol production cost was reduced by 12%. At higher degrees of recirculation, fermentation was clearly inhibited, resulting in a decrease in ethanol yield while hydrolysis seemed unaffected.     

Ethanol Production from Residual Wood Chips of Cellulose Industry: Acid Pretreatment Investigation,Hemicellulosic Hydrolysate Fermentation,and Remaining Solid Fraction Fermentation by SSF Process

Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0–4.0 v/v) and solid to liquid ratio (1:2–1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.     

Ethanol production from olive oil extraction residue pretreated with hot water

The olive pulp fraction contained in the residue generated in olive oil extraction by a two-step centrifugation process can be upgraded by using the cellulose fraction to produce ethanol and recovering high value phenols (tyrosol and hydroxytyrosol). Olive pulp was pretreated in a laboratory scale stirred autoclave at different temperatures (150–250°C). Pretreatment was evaluated regarding cellulose recovery, enzymatic hydrolysis effectiveness ethanol production by a simultaneous saccharification and fermentation process (SSF), and phenols recovery in the filtrate. The pretreatment of olive pulp using water at temperatures between 200°C and 250°C enhanced enzymatic hydrolysis. Maximum ethanol production (11.9 g/L) was obtained after pretreating pulp at 210°C in a SSF fed-batch procedure. Maximum hydroxytyrosol recovery was obtained in the liquid fraction when pretreated at 230°C.     

Hydrothermal pretreatment conditions to enhance ethanol production from poplar biomass

Pretreatment has been recognized as a key step in enzyme-based conversion processes of lignocellulose biomass to ethanol. The aim of this study is to evaluate two hydrothermal pretreatments (steam explosion and liquid hot water) to enhance ethanol production from poplar (Populus nigra) biomass by a simultaneous saccharification and fermentation (SSF) process. The composition of liquid and solid fractions obtained after pretreatment, enzymatic digestibility, and ethanol production of poplar biomass pretreated at different experimental conditions was analyzed. The best results were obtained in steam explosion pretreatment at 210°C and 4 min, taking into account cellulose recovery above 95%, enzymatic hydrolysis yield of about 60%, SSF yield of 60% of theoretical, and 41% xylose recovery in the liquid fraction. Large particles can be used for poplar biomass in both pretreatments, since no significant effect of particle size on enzymatic hydrolysis and SSF was obtained.     

Statistical Optimization of Recycled-Paper Enzymatic Hydrolysis for Simultaneous Saccharification and Fermentation Via Central Composite Design

A central composite design of the response surface methodology (RSM) was employed to study the effects of temperature, enzyme concentration, and stirring rate on recycled-paper enzymatic hydrolysis. Among the three variables, temperature and enzyme concentration significantly affected the conversion efficiency of substrate, whereas stirring rate was not effective. A quadratic polynomial equation was obtained for enzymatic hydrolysis by multiple regression analysis using RSM. The results of validation experiments were coincident with the predicted model. The optimum conditions for enzymatic hydrolysis were temperature, enzyme concentration, and stirring rate of 43.1 °C, 20 FPU g⁻¹ substrate, and 145 rpm, respectively. In the subsequent simultaneous saccharification and fermentation (SSF) experiment under the optimum conditions, the highest 28.7 g ethanol l⁻¹ was reached in the fed-batch SSF when 5% (w/v) substrate concentration was used initially, and another 5% added after 12 h fermentation. This ethanol output corresponded to 77.7% of the theoretical yield based on the glucose content in the raw material.