Validation of a computer program for atomic absorption analysis

 The approach to validation of a computer program for an analytical instrument as a component of the analytical method (using this instrument with the program) is discussed. This approach was used for validating a new program for atomic absorption analysis. The validation plan derived from this approach was based on minimising the influence of all steps of the analytical procedure on the analytical results obtained by the method. In this way significant changes in the results may be caused only by replacement of the previous program by the new one. The positive validation conclusion was based on the comparison of the results of the analysis of suitable reference materials obtained with the new program and with its precursor in the same conditions, and also on comparison of their deviations from the accepted reference values for these materials, with the corresponding uncertainties. Received: 25 January 1997 Accepted: 14 March 1997     

Advances for proficiency testing for genetic laboratory science

Nucleic acid based clinical genetic testing has undergone explosive growth in recent years due in large part to the human genome project. Characterization of the human genome has led to a molecular understanding of the pathogenesis of many human diseases, and ultimately to clinical molecular tests becoming routinely used to diagnose a wide diversity of diseases. This rapid growth in clinical molecular genetic testing coupled with the complexity of the analytical procedures underscores the necessity for proficiency testing (i.e. external quality assessment) to allow laboratories offering such services the ability to evaluate their analytical procedures via inter-laboratory comparisons. The American College of Medical Genetics (ACMG) in partnership with the College of American Pathologists (CAP) have been offering proficiency testing for clinical molecular genetics laboratories since 1995, and presently have more than 230 laboratories from 11 countries enrolled in this program. This paper describes the evolution of this program and several challenges encountered in the delivery of a proficiency testing program for laboratories offering clinical molecular genetic services. Received: 13 April 2002 Accepted: 18 July 2002     

Quality assurance program for the chemical characterization of soils

A quality assurance program has been developed both to assess and to demonstrate the quality of the results produced by an analytical diagram applied to the chemical characterization of soils. The composition of several soils was determined following procedures based on the methods that are applied to silicate materials. A combination of acid decomposition followed by fusion allows the determination of SiO₂, Al, Fe, Ca, Mg, Ti, P, Mn, Cd, Co, Cr, Cu, Ni, Pb and Zn; a specific acid attack was used for Hg analysis and an acid mixture decomposition to analyse Na, K, Li and Sr. Several quality control parameters, namely calibration function characteristics, limits of detection, limits of quantification, quality control standards, duplicate analysis, spike recoveries and certified reference materials analysis, are introduced, evaluated and discussed. The results obtained for the certified reference materials show that the analytical diagram gave acceptable accurate values for the elements applying the quality assurance program proposed.     

Application of a new AMIQAS computer program for integrated quality control, method evaluation and proficiency testing

Summary The computer program AMI - Quality Assessment Scheme (AMIQAS) was designed to give easy statistical management of analytical data in relation to method evaluation, internal quality control and proficiency testing. The program is designed in accordance with the recommendation of the ISO 5725 guideline and other official recommendations. The program consists of a database, test for outliers, statistics and graphs for evaluation of an analytical method for chemical, biological and environmental analysis, different control charts to be used in day-to-day internal quality control (Shewhart charts and z-charts). Finally the program has facilities to perform proficiency testing (also called external quality control) and produce the relevant evaluation reports for the documentation of method performance and quality control of results of measurements. The present paper demonstrates the applicability of the AMIQAS program for integrated method evaluation, internal quality control and proficiency testing using the determination of the concentration of lead in human whole blood as the numerical example.     

A computer program for automated data evaluation to support in vitro higher-throughput screening for drug metabolism and pharmacokinetics attributes

With the advances in analytical techniques, higher-throughput screening for drug metabolism and pharmacokinetics (DMPK) attributes has become an integral part of drug discovery. However, as the number of compounds increases, the volume of data that needs to be processed and evaluated increases exponentially. As a result, a major challenge for the analytical chemist is how to quickly process the vast amount of data so as to keep up with the throughput of the screening assay. We have developed a customized computer program for automated evaluation of the liquid chromatography/tandem mass spectrometric (LC/MS/MS) data generated from the in vitro DMPK screening assays. This program performs automatic data processing and quality control. It identifies analytical anomalies, such as low internal standard intensity and poor reproducibility of replicates. All analytical anomalies for individual compounds are summarized into an 'E-Log' in a color-coded format for reviewing. With the use of this program and other supporting software, data processing and evaluation for up to 100 compounds are accomplished in several minutes.     

Plutonium metal standards exchange program for actinide measurement quality assurance (2001–2007)

Plutonium metal exchange programs operated by the Rocky Flats Plant were conducted from 1956–1989 to ensure quality and to compare measurements in a plutonium metal matrix. Los Alamos National Laboratory (LANL) re-established the program in 2001 to assess the quality of analytical chemistry capabilities that support special nuclear material characterization. It is the only program of its kind for the preparation and distribution of plutonium metal reference materials with a range of impurity contents to multiple laboratories for destructive measurements of elemental concentration, isotopic abundance, and both metallic and non-metallic impurity levels. This program provides independent verification of analytical measurement capabilities for each of the seven currently participating laboratories, and allows any technical problems with analytical measurements to be identified and corrected. This paper focuses on basic program elements and presents a summary of methods and results for plutonium, uranium, neptunium, and americium, measurements.     

Strategies for internal quality control in antidoping analyses

Internal quality control (IQC) is one of the most important elements contributing to quality assurance in the laboratory. In this study, the strategy for the implementation of an IQC program to monitor performance of the analytical procedures used in an antidoping control laboratory is presented. Different IQC parameters have been defined according to the aim of the method (qualitative or quantitative, screening or confirmation). They are based on the analysis of control and calibration samples in each analytical batch and on the use of an internal standard in chromatographic methods. IQC parameters for chromatographic and immunological methods and the acceptance criteria used to check the quality control data obtained are described and discussed. These IQC procedures have been applied during routine antidoping analyses of more than 5000 samples per year in a laboratory accredited by the International Olympic Committee (IOC) and meeting the requirements of the quality standard ISO 17025.     

Sampling for microanalysis: Theories and strategies

Summary Analysts should consider more than simply the determination of the composition of the test portion provided; they should also assess the degree to which the test portion represents the population under evaluation. To do this requires an understanding of both sampling theory and of practical sampling strategies. An acceptable sampling program should include an adequate statistical design, proper sample collection and transport to the analytical laboratory, and proper training of those performing the sampling. Statistical theories and relations that can serve as aids for more efficient sampling include those of Ingamells and Switzer, Gy, Benedetti-Pichler, and others; most of these apply to particulate mixtures and are based on Gaussian distributions. Other treatments of sampling include geostatistical procedures such as kreiging, and the use of fractals. Many environmental and industrial monitoring and quality control operations now in use are based on sampling protocols arrived at by ad hoc procedures. The quality of trace analytical data can be improved and costs of analyses decreased by developing better sampling plans.     

The NIH analytical methods and reference materials program for dietary supplements

Quality of botanical products is a great uncertainty that consumers, clinicians, regulators, and researchers face. Definitions of quality abound, and include specifications for sanitation, adventitious agents (pesticides, metals, weeds), and content of natural chemicals. Because dietary supplements (DS) are often complex mixtures, they pose analytical challenges and method validation may be difficult. In response to product quality concerns and the need for validated and publicly available methods for DS analysis, the US Congress directed the Office of Dietary Supplements (ODS) at the National Institutes of Health (NIH) to accelerate an ongoing methods validation process, and the Dietary Supplements Methods and Reference Materials Program was created. The program was constructed from stakeholder input and incorporates several federal procurement and granting mechanisms in a coordinated and interlocking framework. The framework facilitates validation of analytical methods, analytical standards, and reference materials.     

Two-dimensional supercritical fluid chromatography/mass spectrometry for the enantiomeric analysis and purification of pharmaceutical samples

A new analytical two-dimensional supercritical fluid chromatography/mass spectrometry system (2D SFC/SFC/MS) has been designed and implemented to enhance the efficiency and quality of analytical support in drug discovery. The system consists of a Berger analytical SFC pump and a modifier pump, a Waters ZQ 2000 mass spectrometer, a set of switching valves, and a custom software program. The system integrates achiral and chiral separations into a single run to perform enantiomeric analysis and separation of a racemic compound from a complex mixture without prior clean up. The achiral chromatography in the first dimension separates the racemate from all other impurities, such as un-reacted starting materials and by-products. Mass-triggered fractionation is used to selectively fractionate the targeted racemic compound based on its molecular weight. The purified racemate from the achiral chromatography in the first dimension is then transferred to the chiral column in the second dimension to conduct the enantiomeric separation and analysis. A control software program, we coined SFC2D, was developed and integrated with MassLynx to retrieve acquisition status, current sample information, and real time mass spectrometric data as they are acquired. The SFC2D program also monitors the target ion signal to carry out mass-triggered fractionation by switching the valve to fractionate the desired peak. The 2D SFC/SFC/MS system uses one CO(2) pump and one modifier pump for both first and second dimension chromatographic separations using either gradient or isocratic elution. Similarly, a preparative 2D SFC/SFC/MS system has been constructed by modifying an existing Waters preparative LC/MS system. All components except the back pressure regulator are from the original LC/MS system. Applications of the 2D SFC/SFC/MS methods to the separation and the analysis of racemic pharmaceutical samples in complex mixtures demonstrated that an achiral separation (in first dimension) and a chiral separation (in second dimension) can be successfully combined into a single, streamlined process both in analytical and preparative scale.     

Nuclear forensics—metrological basis for legal defensibility

The admissibility of nuclear forensics measurements and opinions derived from them in US Federal and State courts are based on criteria established by the US Supreme Court in the case of Daubert v. Merrell Dow and the 2000 Amendment of Rule 702 of the Federal Rules of Evidence. These criteria are being addressed by new efforts that include the development of certified reference materials (CRMs) to provide the basis for analytical method development, optimization, calibration, validation, quality control, testing, readiness, and declaration of measurement uncertainties. Quality data is crucial for all stages of the program, from R&D, and database development, to actual casework. Weakness at any point in the program can propagate to reduce the confidence of final conclusions. The new certified reference materials will provide the necessary means to demonstrate a high level of metrological rigor for nuclear forensics evidence and will form a foundation for legally defensible nuclear chemical analysis. The CRMs will allow scientists to devise validated analytical methods, which can be corroborated by independent analytical laboratories. CRMs are required for ISO accreditation of many different analytical techniques which may be employed in the analysis of interdicted nuclear materials.     

A simple detection system for gas chromatography based on molecular absorption spectrometry in the gas phase

Summary A simple and inexpensive detection system for gas chromatography, based on gas-phase, molecular absorption measurements, is presented in which the chromatographic column is directly joined to the spectrophotometer flow cell, without heated transfer lines. A mixture of eight benzene compounds (including methyl, halogen and nitrogen derivatives) were separated and analyzed. Parameters affecting separation (temperature program and carrier gas flow) and measurement quality (wavelength and integration time) were studied and a measurement program designed to modify the wavelength during chromatography. The analytical characteristics of each compound were calculated, obtaining detection limits ranging from 0.5 to 9 g mL^–1. Finally, the method was applied to several synthetic mixtures, with good results.     

Analytical quality control program used by the trace elements in foods and diets sub-network of the FAO European cooperative network on trace elements

Summary The analytical quality control program employed by the ongoing FAO study on 14 trace elements in nationally representative staple foods of European countries is presented. The analytical quality control used is based on: 1) precautions taken to avoid trace element contaminations or losses during sampling and sample handling; and, 2) on methods used to guarantee that the actual determinations yield correct results. The precautions are presented. A number of certified biological reference materials (RMs) were used to validate the analytical methods employed. The following staple food RMs were also prepared: wheat flour, potato powder, animal muscle (pork) and milk powder. They were tested for homogeneity and subjected to an interlaboratory comparison study on the basis of which recommended values for trace element concentrations were defined. Further, the mean relative standard deviation for the 95% confidence limits of the medians in all RMs was below 5% for Ca, Mg and Zn; below 10% for Mn; below 15% for Fe, Cu and Se; and below 25% for Mo and Ni. These RMs were used to control the analytical quality of the trace element determinations in the actual samples. It is concluded that important contaminations were avoided in sampling and sample handling and that use of the RMs described was necessary to guarantee the analytical quality of the results.     

Quantitative validation of a flow-injection determination of penicillin in pharmaceutical formulations by means of a validation program based on an expert system

The quantitative validation of the results of a flow-injection determination of penicillin in pharmaceutical formulations is described. The validation procedure is done by using VALID, which is a generally applicable validation program based on an expert system program. The automated penicillin assay is based on the enzymatic hydrolysis of the penicillin to the corresponding penicilloic acid, which reacts with iodine generated on-line; the iodine consumption is detected amperometrically. The method is evaluated for applicability in pharmaceutical quality control. The complete validation procedure is described. During the program run, the system evaluates the calibration procedure, the drift of the analytical systemm and the effect of the sample matrix. The reliability of the flow-injection method is estimated by evaluating the maximum total error (MTE), which includes both random error and systematic error. The latter was assessed by comparing of the results of the flow-injection method with the results obtained by titration with mercury(II) as the reference method. The user requirement for the assay was an MTE of 10%. The validation procedure showed that the analytical method complied with the requirements for the major part of the concentration range (0.066–0.25 mM).     

Standardization, quality control and education in analytical chemistry

Quality matters have always been an intrinsic component of any curriculum in analytical chemistry. The realizations in the past have shown a wide variability in different countries. With the on-going internationalization of trade this is not a satisfactory situation as the goal of a measurement science supporting this globalization must encompass compatible measurement systems. In order to meet these requirements as soon as possible, and not just with future generations of yet-to-be-trained college graduates, a vigorous program of postgraduate education in analytical quality assurance is necessary in all countries, many of which have already recognized this need and introduced special courses dealing with these topics.This contribution presents a compilation of the most important current developments in analytical quality assurance as these also define the most urgent needs to reshape the educational process for graduates and post-graduates alike. Quantitative concepts are emphasized and the correlations between them are highlighted. Suggestions for topics to be covered in a 4-day post-graduate course on analytical quality assurance are given, based on more than five years of experience.Dedicated to my mother, Dr. med. univ. Gerda Wegscheider, on the occasion of her 70th birthday     

A desk-computer program for calculation of the parameters of acid-base titration curves and protonation or metal-complex stability constants from potentiometric data

The program MINIPOT is designed to run on a desk-computer with 16-kbyte of memory. It can calculate the optimum values of the parameters of a blank acid-base titration in any solvent, and the protonation/deprotonation or overall stability constants of a maximum of four species with compositions H(q)L(p) or M(q)L(p) from potential, titrant volume and analytical concentration data. The program, written in BASIC, is based on the least-squares principle and is capable of simultaneous refinement of a maximum of four parameters.     

Green analytical chemistry: Opportunities for pharmaceutical quality control

This review article summarizes the opportunities for utilizing the green analytical chemistry (GAC) techniques and principles in the field of quality control (QC) of pharmaceuticals. Green analytical chemistry is considered a branch of the green chemistry based on the principles overlapping with the goals of sustainable development. General definitions of quality and quality control, the principles of GAC, proposals for greener sample pretreatment and greener chromatographic method of analysis applied in QC laboratories are discussed herein. The main goal is to achieve more eco-friendly analysis in QC laboratories through different strategies and techniques, replace toxic reagents, and modify or replace analytical methods and/or techniques with safer ones, making it possible to dramatically reduce the amounts of reagents consumed and waste generated.