裂解气相色谱-质谱法研究聚醚酰亚胺的热裂解行为

采用裂解气相色谱-质谱技术研究了聚醚酰亚胺(PEI)在550℃、650℃和750℃裂解温度下的热分解行为.随着裂解温度上升,裂解产物明显增加.在750℃时聚合物分子链断裂完全,共鉴别到25种碎片组分.PEI热分解的碎片中叔丁基苯酚、叔丁基甲基苯酚、苯酚、苯胺、氰苯、2-苯基-1H-异吲哚-1,3(2H)-二酮等5种裂解产物最重要,因此可以依据这几种化合物定性鉴别聚醚酰亚胺.依据热分解产物的数量以及结构推断降解机理为:裂解首先从醚键开始,其次是酰胺基团中的C-N键,然后再经过一系列消除反应、成环反应、重排反应等形成多种裂解碎片.     

裂解气相色谱-质谱法研究壬酸香草酰胺的热裂解

采用在线热裂解/气相色谱-质谱联用技术(Py/GC-MS)对壬酸香草酰胺(PAVA)的热裂解行为进行了研究,在氦气氛围中考察了不同裂解温度和裂解时间对PAVA裂解的影响,通过GC-MS对裂解产物进行定性和半定量分析。结果表明,随着裂解温度的升高,PAVA裂解率快速提高,裂解产物也进一步增多,当裂解温度达到700℃以上时,可裂解出壬酰胺、2-甲氧基-4-甲基苯酚、1-己烯、壬基腈、壬醛等14种产物。同一温度下随着裂解时间的延长,PAVA的裂解率逐步升高,裂解产物发生了进一步的裂解。根据热裂解产物及主要裂解产物的含量变化,初步推断了PAVA的裂解规律。     

裂解气相色谱-质谱法对黄芩浸膏热裂解产物分析

采用热失重分析法(TGA)和在线热裂解气相色谱-质谱法(Py-GC-MS)研究了黄芩浸膏热裂解性质。在氦气氛围中,将黄芩浸膏分别在300,450,600,750,900℃下进行热裂解,并以气相色谱-质谱法对其裂解产物进行定性和半定量分析,并用黄芩浸膏进行了卷烟加香试验。结果表明:①在热失重曲线图中不能较明显地看出黄芩浸膏的较大失重点;②黄芩浸膏在上述温度下检测到的主要挥发性热裂解产物分别为12,18,28,42,40种;③600℃以下,黄芩浸膏热裂解产物主要是醛类、酮类、酯类和呋喃类物质;有害物质的量随着温度的升高而提高;900℃时,则主要为苯、甲苯、萘等有害成分;④黄芩浸膏具有提高卷烟香气质量、改善余味、柔和烟气的作用。     

裂解气相色谱-质谱联用法分析聚醚酰亚胺的裂解产物

应用裂解气相色谱及质谱联用法研究了3种聚醚酰亚胺(PEIM′s)的裂解行为,并根据裂解产物的结构及其相对产率推断了裂解的机理。取3种PEIM样品置于石英裂解管中,分别在550℃,650℃,750℃条件下裂解,所得产物用气相色谱-质谱联用法分析。分析中采用DB-5毛细管色谱柱,电子轰击离子源(200℃,70eV)及在m/z 29～500范围内全扫描方式,并用NIST谱库进行检索和用归一化法计算峰面积进行定量。由试验结果可知:选择在750℃进行裂解较好,在此条件下获得主要裂解产物存在的更明显的信息,有利于对产物进行详细分析和鉴定。     

不同氛围下烟草的热裂解行为研究

烟丝分别在He和空气环境中于600、700、800、900、1 000 ℃下进行热裂解,裂解产物用GC-MS进行在线检测,研究了烟丝样品分别在惰性和有氧氛围中不同温度下的热裂解行为.数据表明,烟丝在He气和空气中热裂解时的产物有较大差异,He气下的裂解产物以烯烃、苯和苯系物为主;在空气下裂解的主要产物为酮、醛、醇、酸和酯等羰基化合物.有氧氛围有益于异戊二烯和1,3-丁二烯的生成,但在一定程度上抑制了酚类物质的产生.在惰性和有氧氛围下,随着温度的升高,多环芳烃化合物的产生量均进一步增加.He氛围下得到的裂解产物类型接近卷烟燃烧时的热解区,而空气氛围下得到的裂解产物类型接近燃烧区.     

升温速率对氨基酸裂解生成含氮气体的影响研究

为进一步阐明卷烟烟气中含氮有害气体的形成机理,以甘氨酸、天冬酰胺和天冬氨酸为研究对象,采用TG-FTIR技术对其在不同升温速率下热解时含氮气体的释放特性进行了研究。结果表明:(1)随着升温速率增加,三种氨基酸TG和DTG曲线各个失重阶段的起始和终止温度向高温侧移动;(2)氨基酸结构不同,HCN、NH3、HNCO的生成温度及生成量不同;(3)增加升温速率,三种氨基酸热解过程中HCN、NH3、HNCO的生成量均增加,但三种氨基酸氮转化的选择性不尽相同。甘氨酸和天冬酰胺热解过程中氮主要转化为NH3,而天冬氨酸在低升温速率下热解时,氮主要转化为HCN和NH3,在高升温速率下主要生成HNCO。     

偶联试剂SMCC的一锅法合成

SMCC是一类含有N-羟基琥珀酰亚胺(NHS)活性酯和马来酰亚胺的双功能偶联剂,可以分别将含有巯基和氨基的化合物键接在一起,在生物及化学领域应用广泛。本文采用一锅法将反式氨甲环酸、马来酸酐在DMF作溶剂的条件下反应生成反式氨甲环酸的马来酰胺,再与三氟乙酸酐、N-羟基丁二酰亚胺、三甲基吡啶等反应生成SMCC,对合成SMCC的工艺进行了简单优化,得出了最佳合成条件,总收率可达92%,纯度可达99%以上。     

基于异斯特维醇的新型伯胺-方酰胺催化的高对映选择性Michael加成反应

新型双功能伯胺-方酰胺能有效催化醛与马来酰亚胺的不对称Michael加成反应.应用此法,可简便地制备一系列取代的琥珀酰亚胺衍生物,并能以高产率(高达98%)和优秀的对映选择性(高达99%ee)分别得到相应加成产物的两个异构体.     

应用裂解气相色谱对生物质快速裂解反应条件的研究

采用现代化学分析领域中重要的分析方法 -裂解气相色谱法 ,对生物质的快速裂解进行了探索性研究。以杨木木屑为研究对象 ,在裂解温度 40 0～ 80 0℃ ,升温速率 1 0 0℃ s、2 50℃ s、50 0℃ s,挥发性产物停留时间 0 6～4 0s的裂解条件下 ,考察了杨木木屑快速裂解气、液、固三种产物及气相组分的分布规律。实验结果表明 ,气、液、固三种产物所占比例及其组分含量取决于裂解条件 -裂解温度、挥发份停留时间和升温速率 ,杨木在升温速率50 0℃ s、挥发性产物停留时间 0 6s、裂解温度 50 0℃下快速裂解 ,可获得最大的产液率 80 % (含水 )。物料平衡的结果证明了裂解色谱研究方法的有效性和可行性。     

烟草中β-胡萝卜素的热裂解产物的研究

为了研究烟草中β-胡萝卜素的高温裂解产物对卷烟抽吸品质的影响,利用热裂解气相色谱/质谱联用仪在不同裂解氛围(空气、氮气中含10%O2及N2)和不同温度(300,600和900 ℃)下对β-胡萝卜素进行裂解,裂解产物用固相微萃取装置进行吸附,然后将吸附到的裂解产物用气相色谱/质谱联用仪(GC/MS)进行分析。结果表明,β-胡萝卜素在不同裂解条件下主要的裂解产物是甲苯、对二甲苯、1,2,3,4-四氢-1,1,6-三甲基萘和2,7-二甲基萘等化合物,另外还生成异佛尔酮、β-环柠檬醛、β-紫罗兰酮、二氢猕猴桃内酯等香味化合物,这些物质随裂解温度和裂解氛围的不同其含量有所差异。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

探究“铁的锈蚀条件”实验创新设计

设计了铁的锈蚀实验,说明了铁钉的处理方法,增加了温度、酸、碱的影响条件,实现了铁跟蒸馏水及空气中氧气快速反应而生锈,使实验在5 min左右就能够得到准确的结果。