二茂铁基查尔酮衍生物的合成及超快三阶非线性光学响应

合成两种新颖的含二茂铁基团的查尔酮衍生物:1-二茂铁基-3-(4-叔丁基苯基)丙烯酮(a)和1-二茂铁基-3-联苯基丙烯酮(b),经~1H NMR、~(13)C NMR和HR-MS对其结构进行了表征,并测定了化合物的热力学性质。采用量子化学方法计算了它们的分子轨道能量和极化率,给出了轨道电子云图。采用紫外-可见吸收光谱和Z-扫描技术分别测定了其线性和非线性光学性质。结果表明,与原料乙酰基二茂铁相比,化合物a和b的紫外吸收明显增强,且b的吸收波长更长;化合物a和b均存在分子内电荷转移现象,表现出超快三阶非线性光学响应。     

两个二茂铁基查尔酮衍生物的合成及超快三阶非线性光学响应

合成两种新颖的含二茂铁基团的查尔酮衍生物：1-二茂铁基-3-(4-叔丁基苯基)丙烯酮(a)和1-二茂铁基-3-联苯基丙烯酮(b),经₁H NMR、₁₃C NMR、HR-MS对其结构进行了表征;测定了该两化合物的热力学性质;采用量子化学方法计算了它们的分子轨道能量和极化率,给出了轨道电子云图;采用紫外-可见吸收光谱和Z-扫描技术测定了其线性和非线性光学性质。结果表明：与原料相比,化合物a和b的紫外吸收明显增加,且b的吸收波长更长;化合物a和b均存在分子内电荷转移现象,表现出超快三阶非线性光学响应。     

三联噻吩基查尔酮衍生物的线性光学性质和超快非线性光学响应北大核心CSCD

以α-三联噻吩甲醛为原料,与3种二氯苯乙酮发生Claisen-Schmidt缩合反应,合成了3种含有三联噻吩基的查尔酮衍生物:1-(α-三联噻吩-2-基)-3-(2,4-二氯苯基)丙烯酮(a)、1-(2,5-二氯苯基)-3-(α-三联噻吩-2-基)丙烯酮(b)和1-(3,4-二氯苯基)-3-(α-三联噻吩-2-基)丙烯酮(c)。借助核磁共振波谱仪(^(1)H NMR、^(13)C NMR)和液-质联用谱仪(LC-MS)对其结构进行了表征;采用Z-扫描技术(600 nm,180 fs)测定了3个化合物的非线性光学吸收性能;运用含时密度泛函理论(TD-DFT)方法计算了它们的极化率(α_(0))、静态第一超极化率(β_(0))、振子强度(f_(0))、跃迁能(ΔE)、基态和最主要激发态之间的偶极矩差(Δμ)、最主要激发态的主要组成、最高占据分子轨道(HOMO)和最低空分子轨道(LUMO)之间的能隙,同时测定了它们的线性光学性质。结果表明,化合物c的紫外吸收波长、荧光发射波长、热稳定性、极化率均最大;化合物a—c均存在分子内电荷转移现象,非线性吸收均为双光子吸收,化合物a、b还有五阶非线性吸收,它们均表现出超快非线性光学响应,可作非线性光学研究备选材料。     

二茂铁基查尔酮衍生物的超快三阶非线性光学响应

合成三例二茂铁基查尔酮衍生物:1-二茂铁基-3-(5-溴噻吩-2-基)-2-丙烯-1-酮(1)、1-二茂铁基-3-(4-溴噻吩-2-基)-2-丙烯-1-酮(2)和1-二茂铁基-3-(5-氯噻吩-2-基)-2-丙烯-1-酮(3);采用1H NMR、13C NMR和HR-MS对化合物1～3进行了结构表征,并测定了其热学性质;运用密度泛函理论方法进行结构优化,并计算得到了它们的分子轨道能量和极化率;采用紫外-可见吸收光谱与Z-扫描技术(532nm,180fs)分别测定了三种化合物的线性和非线性光学性质。结果表明,化合物1～3的紫外吸收波长发生明显红移,且1的非线性吸收幅度、极化率和分子超极化率最大; 1、2和3均存在分子内电荷转移现象,表现出超快三阶非线性光学响应。     

二茂铁基查尔酮衍生物的超快三阶非线性光学响应

合成三例二茂铁基查尔酮衍生物:1-二茂铁基-3-(5-溴噻吩-2-基)-2-丙烯-1-酮(1)、1-二茂铁基-3-(4-溴噻吩-2-基)-2-丙烯-1-酮(2)和1-二茂铁基-3-(5-氯噻吩-2-基)-2-丙烯-1-酮(3);采用1H NMR、13C NMR和HR-MS对化合物1～3进行了结构表征,并测定了其热学性质;运用密度泛函理论方法进行结构优化,并计算得到了它们的分子轨道能量和极化率;采用紫外-可见吸收光谱与Z-扫描技术(532nm,180fs)分别测定了三种化合物的线性和非线性光学性质。结果表明,化合物1～3的紫外吸收波长发生明显红移,且1的非线性吸收幅度、极化率和分子超极化率最大; 1、2和3均存在分子内电荷转移现象,表现出超快三阶非线性光学响应。     

基于二茂铁的两个查尔酮衍生物的合成及超快三阶非线性光学响应

二茂铁是合成新颖有机功能材料的基本单元之一。 本文设计并合成了两个基于二茂铁的同分异构查尔酮衍生物:1-二茂铁基-3-(噻吩-2-基)丙烯酮(a)和1-二茂铁基-3-(噻吩-3-基)丙烯酮(b)。 采用超快激光Z-扫描技术(脉宽180 fs,波长532 nm)测定了化合物a和b的三阶非线性光学性质。 结果表明,化合物a吸收系数β=-2.1×10^-12 m/W,折射率n₂=1.9×10^-19 m²/W,分子超极化率γ=5.37×10^-32 esu;化合物b:β=-1.2×10^-13 m/W,n₂=2.0×10^-19 m²/W,γ=4.48×10^-32 esu。 说明在飞秒激光激发下,电荷转移能够在化合物a和b分子内部快速进行,二者均具有优异的超快三阶非线性光学响应。 在B3LYP/6-311+G(d,p)理论水平下,计算了化合物a和b分子轨道能量、极化率和各基团在前线分子轨道中的占有率。 理论计算结果显示,二茂铁基团在化合物a和b前线分子轨道中占有率分别为97%和98%,对两化合物的非线性光学性能起主导作用。     

1-(芘-1-基)-3-(苯并噻吩-3-基)丙烯酮的合成和三阶非线性光学性质研究

合成1种查尔酮衍生物1-(芘-1-基)-3-(苯并噻吩-3-基)丙烯酮(PBTAK),经IR,1 H NMR,13C NMR和HR-MS对其结构进行表征.采用4f相位相干成像技术测定了它的三阶非线性光学性质并确定了相关参数:脉宽为4nm,激光波长为460nm,非线性吸收系数β=0.23×10~(-9) m/W,非线性折射率n2=-0.50×10~(-16) m~2/W,三阶非线性极化率χ~((3))=9.37×10~(-21) C;同时测定了紫外光谱、荧光光谱和DSC曲线.运用密度泛函方法计算了PBTAK的分子轨道能量和极化率,结果表明电子转移能在分子内部进行,显示出良好的非线性光学活性.     

芳香查尔酮衍生物的合成、理论计算及三阶非线性光学性质

合成了2种新的具有潜在应用价值的非线性光学(NLO)有机材料芳香查尔酮衍生物1-(呋喃-2-基)-3-(4-甲氧基苯基)丙烯酮(1)和1-(噻吩-2-基)-3-(4-甲氧基苯基)丙烯酮(2),并对其进行了NMR、IR和HR-MS结构表征。 采用4f相位相干成像技术测定了化合物1和2的三阶NLO性质并确定了相关参数:脉冲宽度4 nm,激光波长440 nm,化合物1:非线性吸收系数β=5.5×10^-10 m/W,非线性折射系数n₂=-2.1×10^-17 m²/W,三阶非线性极化率χ⁽³⁾=1.58×10^-11 esu;化合物2:β=-2.4×10^-10 m/W,n₂=0.3×10^-17 m²/W,χ⁽³⁾=0.50×10^-11 esu;并测定了紫外光谱和DSC曲线。 采用密度泛函方法计算了化合物1和2的轨道能量和极化率,结果表明电子转移能在分子内部进行,说明比较易于极化,展示了良好的非线性光学性质。     

C60-吡咯烷衍生物的合成及非线性光学性质的研究

通过富勒烯C₆₀与肌氨酸和有机醛化合物的1,3-偶极环加成反应, 获得了九种含不同有机功能基团的C₆₀吡咯烷衍生物1～9, 用¹H NMR, ¹³C NMR, FTIR, UV-vis和FAB-MS进行了结构表征; 利用皮秒激光光源, 采用z扫描技术测定了分子的三阶非线性超极化率γ⁽³⁾, 结果显示: 化合物3 (γ⁽³⁾＝4.14×10^－33 esu)具有最大的三阶非线性光学系数, 说明增加噻吩共轭链的长度, 使三阶非线性活性增加; 对具有相同共轭链的C₆₀-噻吩吡咯烷衍生物(2, 5, 1和4), 吸电子取代基减小了三阶光学非线性活性, 给电子基增大了三阶光学非线性活性; 同时发现喹啉环2-位键联(7)比4-位(8)有更好的三阶光学非线性活性.     

两个查尔酮衍生物的合成、理论计算及三阶非线性光学性质

合成了两个查尔酮类衍生物1-(4-甲基苯基)-3-(4-二甲氨基苯基)丙烯酮(1)和1-(4-甲基苯基)-3-(4-甲氧基苯基)丙烯酮(2),通过1H NMR、13C NMR、IR、HR-MS对其进行结构表征。采用4f相位相干成像技术测定了化合物1和2的三阶NLO性质,确定了相关参数:脉冲宽度4nm,激光波长分别为500和440nm,1:非线性吸收系数β=7.3×10-10m/W,非线性折射率n2=-3.6×10-17m2/W,三阶非线性极化率χ(3)=2.56×10-11esu;2:β=-4.8×10-10m/W,n2=2.0×10-17m2/W,χ(3)=1.45×10-11esu。测定了化合物紫外光谱,并通过DSC考察了化合物的热稳定性。采用密度泛函方法计算了化合物1和2的轨道能量和极化率,结果表明电子转移能在分子内部进行,显示出良好的非线性光学活性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.