Synthesis of siloxane‐containing benzoxazine and its synergistic effect on flame retardancy of polyoxymethylene

A type of trialkoxysilane‐containing naphtholoxazine compound (Naph‐boz) was successfully synthesized and combined with ammonium polyphosphate/melamine (APP/ME) as an intumescent flame retardant (IFR) to improve the flame‐retardant efficiency of polyoxymethylene (POM). The Underwriters Laboratories 94 (UL94) vertical burning test, limiting oxygen index (LOI), cone calorimeter, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and Raman spectral analysis were used to study the flame‐retardant properties and related mechanism. The results showed that the formulation with 20 wt.% of APP, 6 wt.% of ME, and 4 wt.% of Naph‐boz passed UL94 V‐1 rating, and the LOI value was improved to 40.3%. Compared with pure POM, the IFR with Naph‐boz had greater reduction in peak heat release rate (lower 74.9%) and total heat release (lower 40.2%). SEM images showed that compact and reinforcing charred layer was formed during the POM/IFR/4Naph‐boz samples combustion, which was beneficial at reducing and maintaining low combustion parameters throughout the cone calorimeter test. The synergistic flame‐retardant effect between Naph‐boz and APP/ME was considered as the reason for the improvement in flame retardancy POM. Furthermore, because of the Naph‐boz was conducive to the compatibility between the flame retardants and matrix, the notched Izod impact strength of POM/IFR/4Naph‐boz composite was higher than that of POM/IFR system.     

Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)

A novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) was prepared via the reaction of a caged bicyclic phosphorus (PEPA) compound and 4,4′-diamino diphenyl methane (DDM) in two steps. The product was added to poly(butylene terephthalate) (PBT) to obtain halogen-free flame retarded polyester. UL-94 test, thermogravimetry and in situ infrared spectroscopy were used to characterize the flammability, thermal degradation properties and the char-forming process. It was shown that the phosphorus-nitrogen containing compound could improve both the flame retardancy and thermal stability more effectively than other P-N flame retardants. Furthermore, it was a good char-forming agent incorporated with the co-addition of polyurethane (PU) when the combustion occurred. The formation of P-N structure was incorporated in the char layer.     

Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A new triazine polymer was synthesized by using cyanuric chloride, ethanolamine and ethylenediamine as raw materials. It is used both as a charring agent and as a foaming agent in intumescent flame retardants, designated as charring-foaming agent (CFA). Effect of CFA on flame retardancy, thermal degradation and mechanical properties of intumescent flame retardant polypropylene (PP) system (IFR-PP system) has been investigated. The results demonstrated that the intumescent flame retardant (IFR) consisting of CFA, APP and Zeolite 4A is very effective in flame retardancy of PP. It was found that when the weight ratio of CFA to APP is 1:2, that is, the components of the IFR are 64 wt% APP, 32 wt% CFA and 4 wt% Zeolite 4A, the IFR presents the most effective flame retardancy in PP systems. LOI value of IFR-PP reaches 37.0, when the IFR loading is 25 wt% in PP. It was also found that when the IFR loading is only 18 wt% in PP, the flame retardancy of IFR-PP can still pass V-0 rating, and its LOI value reaches 30.2. TGA data obtained in pure nitrogen demonstrated that CFA has a good ability of char formation itself, and CFA shows a high initial temperature of the thermal degradation. The char residue of CFA can reach 35.7 wt% at 700 °C. APP could effectively promote the char formation of the APP-CFA system. The char residue reaches 39.7 wt% at 700 °C, while it is 19.5% based on calculation. The IFR can change the thermal degradation behaviour of PP, enhance T_max of the decomposition peak of PP, and promote PP to form char, based upon the results of the calculation and the experiment. This is attributed to the fact that endothermic reactions took place in IFR charring process and the char layer formed by IFR prevented heat from transferring into inside of IFR-PP system. TGA results further explained the effective flame retardancy of the IFR containing CFA.     

二季戊四醇磷酸酯三聚氰胺盐的合成及阻燃性能测试

以磷酸、季戊四醇、三聚氰胺为原料,通过酸醇直接酯化和烘焙中和两步反应合成膨胀型阻燃剂二季戊四醇磷酸酯三聚氰胺盐,并对烘焙中和反应条件及其在聚乙烯中的阻燃性能进行了研究.确定最佳合成条件:n (二季戊四醇磷酸酯):n (三聚氰胺)=1:1;反应温度130-140℃;反应时间3-4h.将此阻燃剂添加到聚乙烯中,样品重量35...     

The effect of hBN on the flame retardancy and thermal stability of P-N flame retardant PA6

A novel thermally conductive Polyamide 6 (PA6) with good fire resistance was prepared by introducing a phosphorous-nitrogen flame retardant (FR) and platelet-shaped hexagonal boron nitride (hBN) into the matrix. With high thermal conductivity and good flame retardancy, the material is suitable for applications in electronic and electrical devices. The limiting oxygen index (LOI) changes for various loadings content of FR. However this formulation still does not show an ideal fire resistance, due to the appearance of melt dripping behavior during the UL 94 test. With the extra introduction of 3 vol% and 5 vol% hBN, the melt dripping behavior during the burning process completely disappeared. The hBN also increased the thermal conductivity. Furthermore PA6 compounded with FR and hBN showed a better thermal stability than neat PA6. The morphology of the char residues was investigated by scanning electron microscopy (SEM). The flaky hBN acted as the framework in the char structure and the rigid hBN could effectively break the bubble-shaped char on the surface of the residues which resulted in the enhancement of the strength and compactness of the char.     

Incorporation of a flame retardancy enhancing phosphorus-containing diol into poly(butylene terephthalate) via solid state polycondensation: A comparative study

The phosphorus-containing aliphatic-aromatic diol 2-[4-(2-hydroxy-ethoxy)-3-(10-oxo-10-H9-oxa-10-λ5-phospha-phenanthrene-10-yl)-phenoxy]-ethanol, a potential flame retardant, was incorporated into poly(butylene terephthalate) (PBT) by solid state polycondensation. Thus, polymers with various ratios of PBT/DOPO-diol and number-average molar masses up to 57,000 g mol⁻¹ could be prepared. Their molar masses were higher than those of copolyesters with comparable composition obtained by direct melt polycondensation. Structures and properties of copolyesters produced by both methods were not significantly different after melt processing. Their thermal properties and combustion behaviour were investigated by means of DSC, TGA, and pyrolysis combustion flow calorimetry. Combustion studies revealed high char yields, very low heat release capacities and high limiting oxygen index (LOI) at rather low P-contents, indicative of better flame-retardancy properties.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

Preparation of microencapsulated ammonium polyphosphate with montmorillonite‐melamine formaldehyde resin and its flame retardancy in EVM

Microencapsulated ammonium polyphosphate (MMT‐MF‐APP) with a montmorillonite‐melamine formaldehyde resin coating layer was successfully prepared by in situ polymerization. The product was characterized by Fourier‐transform infrared, X‐ray photoelectron spectroscopy, and scanning electron microscopy. Water absorption analysis showed that the microencapsulation of APP with the MMT‐MF resin leads to a decrease in the particle's water solubility. The microcapsules also exhibited better mechanical properties and higher flame retardancy in the ethylene–vinyl acetate copolymer with high vinyl acetate content (EVM) rubber compared with the common ammonium polyphosphate. Moreover, thermogravimetric analysis results showed that the EVM composites with MMT‐MF‐APP and dipentaerythritol (DPER) as flame retardants possess higher thermal stability than those with common APP and DPER as flame retardants. Copyright © 2011 John Wiley & Sons, Ltd.     

A method for simultaneously improving the flame retardancy and toughness of PLA

In order to modify the brittleness and flame retardant properties of poly(lactic acid) (PLA), a series of flame retardant toughened PLA composites were prepared using poly(ethylene glycol) 6000 (PEG6000) as a toughening and charring agent together with ammonium polyphosphate (APP) as an acid source and blowing agent. The fire and thermal behavior of PLA/PEG/APP composites was evaluated by limiting oxygen index (LOI), UL‐94, cone calorimeter, and thermogravimetric analysis (TGA). The results showed that the PLA/PEG/APP system had good charring ability and could improve the flame retardancy of PLA. When the content of APP in the composites was more than 5 wt%, all samples could reach UL‐94 V‐0 rating. The results of mechanical property tests demonstrated that the brittleness of PLA was also improved after blended with PEG6000. All the PLA/PEG/APP composites with an APP content of less than 10 wt% showed an obvious neck and fracture behavior, that is, the tensile behavior of PLA was changed from brittle to ductile. Copyright © 2010 John Wiley & Sons, Ltd.     

含季戊四醇磷酸酯阻燃剂的合成与表征

采用1-氧代-4-羟甲基-2,6,7-三氧杂-1-磷杂双环[2.2.2]辛烷(PEPA)、三氯氧磷、双酚A和双酚S为反应物,合成了两个新型添加型阻燃剂:双酚A双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BAPP)和双酚S双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BSPP),通过元素分析、FT-IR和1H NMR等表征了标题化合物的结构,结果表明,所合成的标题化合物的结构与预期一致。热失重分析结果证明,BAPP和BSPP质量损失5%(wt)时的温度分别为343.6℃和352.3℃,600℃残余量分别达46.6%和55.5%,具有较高的热稳定性和结炭性能。阻燃性能实验证明,E-51环氧树脂中分别添加质量分数为18.2%(wt)的BAPP和BSPP时,极限氧指数分别为32.2%和31.8%,均能达到UL 94 V-0级。     

Synthesis and thermal stability of a novel phosphorus-nitrogen containing intumescent flame retardant

A novel phosphorus-nitrogen containing intumescent flame retardant （P-N IFR） was prepared via the reaction of dichlor-opentate with N-methylaniline. The structure of the product was confirmed by ^1H NMR, ^31p NMR, MS and IR. TGA analysis showed it has effective thermal stability.     

Synthesis and characterization of P/Si flame retardant and its application in epoxy systems

In this report, a novel phosphorus/silicon‐containing reactive flame retardant, hexa(3‐triglycidyloxysilylpropyl)triphosphazene (HGPP), was synthesized and characterized by Fourier transform infrared spectrometry and nuclear magnetic resonance spectra (¹H, ³¹P, and ²⁹Si), respectively. To prepare cured epoxy, HGPP had been co‐cured with diglycidyl ether of bisphenol‐A (DGEBA) via 4,4‐diaminodiphenylsulfone as a curing agent. The mechanical, thermal, and flame retardant properties of the cured epoxy were evaluated by dynamic mechanical analysis, thermogravimetric analysis, and limiting oxygen index (LOI). According to these results, it could be found that incorporation of HGPP in the cured epoxy system showed good thermal stability, high LOI values, and high char yield at high temperature. As moderate loading of HGPP in the epoxy system, its storage modulus and glass transition temperature were higher than those of neat DGEBA. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermal degradation and flame retardancy of epoxy resins containing intumescent flame retardant

Pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt, a novel cheap macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by IR. Epoxy resins (EP) were modified with IFR to get the flame retardant EP, whose flammability and burning behavior were characterized by UL 94 and limiting oxygen index (LOI). 25 mass% of IFR were doped into EP to get 27.2 of LOI and UL 94 V-0. The thermal properties of epoxy resins containing IFR were investigated with thermogravimetry (TG) and differential thermogravimetry (DTG). Activation energy for the decomposition of samples was obtained using Kissinger equation. The resultant data show that for EP containing IFR, compared with EP, IFR decreased mass loss, thermal stability and R _max, increased the char yield. The activation energy for the decomposition of EP is 230.4 kJ mol⁻¹ while it becomes 193.8 kJ mol⁻¹ for EP containing IFR, decreased by 36.6 kJ mol⁻¹, which shows that IFR can catalyze decomposition and carbonization of EP.     

Synthesis of a triazine-based macromolecular hybrid charring agent containing zinc borate and its flame retardancy and thermal properties in polypropylene

Abstract

A triazine-based macromolecular hybrid charring agent containing zinc borate (MCA-K-ZB) was synthesized and combined with ammonium polyphosphate (APP) to improve the flame retardancy of polypropylene (PP). The flame retardancy and thermal properties of PP composites were investigated using limited oxygen index, vertical burning test, and thermogravimetric analysis. The results showed APP/MCA-K-ZB can improve the flame retardancy of PP compared with APP/MCA-K/ZB. The morphology of the char residues was investigated by scanning electron microscopy (SEM). The SEM result shows that MCA-K-ZB can improve the compactness and continuity of char residue compared with MCA-K/ZB, therefore improving the flame retardancy of PP composites.     

Synthesis of a novel hybrid synergistic flame retardant and its application in PP/IFR

A novel inorganic-organic hybrid synergistic flame retardant was prepared by sol-gel reaction and characterized by NMR and FT-IR. It showed that the fire resistance of polypropylene/intumescent flame retardant (PP/IFR) composites could be improved with the combination of hybrid synergistic flame retardant. The char morphology and structure of PP composites were characterized by SEM and Raman spectra. The influence of the hybrid flame retardant on the thermal degradation process of PP composites was analyzed by FT-IR and the rheological behavior of the PP composites was also evaluated. The thermal stability of PP composites was characterized by TGA, weight loss difference and integral procedural decomposition temperature (IPDT). It indicated that the hybrid synergistic flame retardant had good synergistic effect with IFR.     

Effects of carbon nanotubes on the thermal stability and flame retardancy of intumescent flame-retarded polypropylene

Flame retardant mixtures of carbon nanotubes (CNTs) and intumescent flame retardant (IFR) were embedded in polypropylene (PP) to investigate what will happen if the additives exhibit two different flame retardation mechanisms. TEM tests showed that CNTs dispersed homogenously in PP matrix without any visible agglomeration. The effects of CNTs on thermal stability and flammability of PP were investigated by thermogravimetry (TG) and cone calorimetry tests, respectively. Results indicated that the introduction of CNTs only enhanced thermal stability of materials in a certain temperature range, but caused a severe deterioration of flame retardancy due to the interaction of the network structure and the intumescent carbonaceous char. Furthermore, conditions for an intumescent flame retardation system to behave with high efficiency were also discussed by a secondary combustion test.     

Flame retardancy and thermal degradation of intumescent flame retardant polypropylene material

The flame retardancy and thermal degradation properties of polypropylene (PP) containing intumescent flame retardant additives, i.e. melamine pyrophosphate (MPyP) and charring‐foaming agent (CFA) were characterized by limiting oxygen index (LOI), UL 94, cone calorimeter, microscale combustion calorimetry, and thermogravimetric analysis (TGA). It has been found that the PP material containing only MPyP does not show good flame retardancy even at 30% additive level. Compared with the PP/MPyP binary system, the LOI values of the PP/MPyP/CFA ternary materials at the same additive loading are all increased, and UL 94 rating is raised to V‐0 from no rating (PP/MPyP). The cone calorimeter results show that the heat release rate and mass loss rate of some ternary materials decrease in comparison with the binary material. The microscale combustion calorimetry results indicate that the sample containing 22.5 wt% MPyP and 7.5 wt% CFA has the lowest heat release rate among all samples. The TGA results show that the thermal stability of the materials increases with the addition of MPyP, while decreases with the addition of CFA. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of thermally stable and flame retardant hexakis(4-aminophenoxy)cyclotriphosphazene-based polyimide matrices

A new approach to the preparation of hexakis(4-aminophenoxy)cyclotriphosphazene (HACTP) based polyimide (PI) matrices is proposed, for improved thermal and flame retardant properties. HACTP was synthesized with good yield. The structure of HACTP was confirmed by various characterization techniques, such as FTIR, NMR, and mass Spectroscopy. Polyimide matrices were prepared by thermal imidization process using HACTP and dianhydrides using N-methyl pyrrolidone as a solvent. The successful formation of HACTP-based polyimide matrices was confirmed by the FTIR. Thermal properties of the PI were analyzed using DSC and TGA techniques. Data obtained from the thermal studies indicate that the HACTP-based PI possesses better thermal and flame retardant properties.     

A novel intumescent flame retardant: Synthesis and application in ABS copolymer

A novel phosphorous-nitrogen structure containing intumescent flame retardant, poly(4,4-diaminodiphenyl methane spirocyclic pentaerythritol bisphosphonate) (PDSPB) was synthesized and characterized. Thermal stability and flammability properties of ABS/PDSPB composites were investigated by thermogravimetric analysis (TGA) and cone calorimeter test, respectively. The results showed that the addition of PDSPB enhanced the thermal stability and flame retardancy of ABS significantly. The weight of residues improved greatly with the addition of PDSPB. FTIR and SEM investigations revealed that the residual chars contain polyphosphoric or phosphoric acid, which plays an important role in the process of carbonization. The intumescent chars formed from PDSPB and ABS/PDSPB composites were intact, multicellular and strong. It is confirmed that the char structure was a critical factor for flame retardancy of ABS resin.     

Flame‐retardancy and anti‐dripping effects of intumescent flame retardant incorporating montmorillonite on poly(lactic acid)

In the present study, the effects of intumescent flame retardant (IFR) incorporating organically modified montmorillonite (O‐MMT) on the flame retardancy and melt stability of PLA were investigated. The flame‐retardant PLA was prepared using a twin‐screw extruder and a two roll mill. Then, the influence of IFR and MMT on flame retardancy and melt stability was thoroughly investigated by means of limiting oxygen index (LOI), vertical burning test, thermogravimetric analysis, scanning electronic microscopy, melt flow index (MFI), and parallel plate rheological experiments. The experimental results show that the IFR system in combination with MMT has excellent fire retardancy, i.e. the sample could achieve a UL94 V‐0 rating and LOI value increases from 20.1 for pristine PLA to 27.5 for the flame‐retarded PLA. MFI and rheological measurement indicate that O‐MMT significantly enhances the melt stability and suppresses the melt dripping. Copyright © 2009 John Wiley & Sons, Ltd.